ch376-native: revert non-related changes applied to RCEZ80 config files

Source/HBIOS/Config/RCEZ80_std.asm

@@ -50,23 +50,23 @@
 CPUOSC		.SET	20000000	; CPU OSC FREQ IN MHZ
 ;
 FPLED_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL LEDS
-FPSW_ENABLE	.SET	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPSW_ENABLE	.SET	TRUE		; FP: ENABLES FRONT PANEL SWITCHES
 CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
 VDAEMU_SERKBD	.SET	$FF		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
 ;;
-TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_MSXUKY	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY]
-TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU|MSXUKY]
+TMS80COLS	.SET	FALSE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
 TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VRCENABLE	.SET	FALSE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
 EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
-FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 ;
-IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
-PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]

Source/HBIOS/cfg_RCEZ80.asm

@@ -125,7 +125,7 @@ PKDENABLE	.SET	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.SET	$60		; BASE I/O ADDRESS OF PKD PPI
 PKDOSC		.SET	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.SET	FALSE		; ENABLES HEATH H8 FRONT PANEL
-LCDENABLE	.SET	FALSE		; ENABLE LCD DISPLAY
+LCDENABLE	.SET	TRUE		; ENABLE LCD DISPLAY
 LCDBASE		.SET	$DA		; BASE I/O ADDRESS OF LCD CONTROLLER
 GM7303ENABLE	.SET	FALSE		; ENABLES THE GM7303 BOARD WITH 16X2 LCD
 ;