ch376-native:updated master and ez80 configs - defaults to off at master, and on for ez80

Source/HBIOS/Config/RCEZ80_std.asm

@@ -87,9 +87,9 @@ CHENABLE	.SET	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
 CH0USBENABLE	.SET	FALSE		; CH375: ENABLE CH375 USB DRIVER
 CH1USBENABLE	.SET	FALSE		; CH376: ENABLE CH376 USB DRIVER
 CHNATIVEENABLE	.SET	TRUE		; CH376: ENABLE CH376 NATIVE USB DRIVER
-CHNATIVEFORCE	.SET	TRUE		; CH376: DISABLE AUTO-DETECTION OF MODULE - ASSUME ITS INSTALLED
 CHSCSIENABLE	.SET	TRUE		; CH376: ENABLE CH376 NATIVE MASS STORAGE DEVICES (REQUIRES CHNATIVEENABLE)
 CHUFIENABLE	.SET	TRUE		; CH376: ENABLE CH376 NATIVE UFI FLOPPY DISK DEVICES (REQUIRES CHNATIVEENABLE)
-CHNATIVEEZ80	.SET	TRUE
+CHNATIVEEZ80	.SET	TRUE		; CH376: DELEGATE USB DRIVERS TO EZ80'S FIRMWARE
+CHNATIVEFORCE	.SET	FALSE		; CH376: DISABLE AUTO-DETECTION OF MODULE - ASSUME ITS INSTALLED
 
 EZ80TIMER	.SET	EZ80TMR_INT	; EZ80: TIMER TICK MODEL: EZ80TMR_[INT|FIRM]

Source/HBIOS/cfg_MASTER.asm

@@ -498,11 +498,12 @@ EZ80_WSMD_TYP	.EQU	EZ80WSMD_CALC	; BUS WAIT STATE CONFIG: EZ80WSMD_[CALC|CYCLES|
 ;
 ; BUS TIMING FOR ON CHIP ROM
 ;
-EZ80_FLSH_WS		.EQU	1		; WAIT STATES FOR ON CHIP FLASH (0-7)
-EZ80_FLSH_MIN_NS	.EQU	60		; MINIMUM WAIT STATES TO APPLY TO ON-CHIP FLASH, IF EZ80_WSMD_TYP = EZ80WSMD_CALC
-EZ80_FWSMD_TYP		.EQU	EZ80WSMD_CALC	; WAIT STATE TYPE: EZ80RMMD_[CALC|WAIT] (CYCLES NOT ALLOWED)
+EZ80_FLSH_WS	.EQU	1		; WAIT STATES FOR ON CHIP FLASH (0-7)
+EZ80_FLSH_MIN_NS .EQU	60		; MINIMUM WAIT STATES TO APPLY TO ON-CHIP FLASH, IF EZ80_WSMD_TYP = EZ80WSMD_CALC
+EZ80_FWSMD_TYP	.EQU	EZ80WSMD_CALC	; WAIT STATE TYPE: EZ80RMMD_[CALC|WAIT] (CYCLES NOT ALLOWED)
 
 CHNATIVEENABLE	.EQU	FALSE		; CH376: ENABLE CH376 NATIVE USB DRIVER
 CHSCSIENABLE	.EQU	FALSE		; CH376: ENABLE CH376 NATIVE MASS STORAGE DEVICES (REQUIRES CHNATIVEENABLE)
 CHUFIENABLE	.EQU	FALSE		; CH376: ENABLE CH376 NATIVE UFI FLOPPY DISK DEVICES (REQUIRES CHNATIVEENABLE)
 CHNATIVEFORCE	.EQU	FALSE		; CH376: DISABLE AUTO-DETECTION OF MODULE - ASSUME ITS INSTALLED (REQUIRES CHNATIVEENABLE)
+CHNATIVEEZ80	.EQU	FALSE		; CH376: DELEGATE USB DRIVERS TO EZ80'S FIRMWARE

Source/HBIOS/cfg_RCEZ80.asm

@@ -405,6 +405,12 @@ EZ80TMR_NONE	.SET	0		; DO NOT USE ON-BOARD TIMER TO GENERATE TICKS
 EZ80TMR_INT	.SET	1		; MARSHALL TIMER TICK INTERRUPTS FROM EZ80 TO HBIOS
 EZ80TMR_FIRM	.SET	2		; DELEGATE SYS TIMER HBIOS CALL TO EZ80 FIRMWARE (TIMER TICK INTS DISABLED)
 ;
+CHNATIVEENABLE	.EQU	FALSE		; CH376: ENABLE CH376 NATIVE USB DRIVER
+CHSCSIENABLE	.EQU	FALSE		; CH376: ENABLE CH376 NATIVE MASS STORAGE DEVICES (REQUIRES CHNATIVEENABLE)
+CHUFIENABLE	.EQU	FALSE		; CH376: ENABLE CH376 NATIVE UFI FLOPPY DISK DEVICES (REQUIRES CHNATIVEENABLE)
+CHNATIVEFORCE	.EQU	FALSE		; CH376: DISABLE AUTO-DETECTION OF MODULE - ASSUME ITS INSTALLED (REQUIRES CHNATIVEENABLE)
+CHNATIVEEZ80	.EQU	TRUE		; CH376: DELEGATE USB DRIVERS TO EZ80'S FIRMWARE
+
 EZ80UARTENABLE	.SET	TRUE		; EZ80 UART: ENABLE EZ80 UART0 DRIVER (EZ80UART.ASM)
 EZ80RTCENABLE	.SET	TRUE		; EZ80 ON CHIP RTC
 EZ80TIMER	.SET	EZ80TMR_FIRM	; EZ80: TIMER TICK MODEL: EZ80TMR_[INT|FIRM]

Source/HBIOS/ch376kyb.asm

@@ -5,6 +5,15 @@
 ;
 ; This driver is designed to work within the TMS video driver for a CRT solution.
 
+
+#IF (!CHNATIVEENABLE)
+	.ECHO	"*** TMSMODE: TMSMODE_MSXUKY REQUIRES CHNATIVEENABLE***\n"
+	!!!!! *** TMSMODE: TMSMODE_MSXUKY REQUIRES CHNATIVEENABLE***
+_usb_kyb_status:
+_usb_kyb_flush:
+#ENDIF
+
+
 #DEFINE DEFM	.DB
 #DEFINE DEFB	.DB
 #DEFINE DEFW	.DW