Improve Build and Doc for CP/M 3 and ZPM3

- Put CP/M 3 and ZPM3 built system files into Binary directory to make them easier to access for manual upgrades.
- Improve upgrade documentation.

Binary/Apps/Makefile

@@ -7,4 +7,4 @@ all::
 	mkdir -p Tunes
 
 clobber::
-	rm -f *.bin *.com *.img *.rom *.pdf *.log *.eeprom *.COM *.BIN Tunes/*.mym Tunes/*.pt?
+	@rm -f *.bin *.com *.img *.rom *.pdf *.log *.eeprom *.COM *.BIN Tunes/*.mym Tunes/*.pt?

Binary/Apps/ReadMe.txt

@@ -11,4 +11,11 @@ are specific to RomWBW.  The source for these applications is found
 in the Source\Apps directory of the distribution.
 
 The Tunes subdirectory contains some sample ProTracker and MYM sound
-files that can be played by the TUNE application.
+files that can be played by the TUNE application.
+
+All of these files are already included in the pre-built boot disk
+images.  They are also included on the ROM disk except for
+FAT.COM, TUNE.COM, and the sample tune files in the Tunes directory.
+
+If you upgrade your ROM to a new version, you should also copy
+these files over to any hard disk images you are using.

Binary/CPM3/Clean.cmd

@@ -0,0 +1,11 @@
+@echo off
+setlocal
+
+if exist *.spr del *.spr
+if exist *.com del *.com
+if exist *.sys del *.sys
+if exist *.pat del *.pat
+if exist *.dat del *.dat
+if exist *.1st del *.1st
+if exist *.spr del *.spr
+if exist *.pat del *.pat

Binary/CPM3/Makefile

@@ -0,0 +1,7 @@
+TOOLS = ../../Tools
+MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.spr)
+
+include $(TOOLS)/Makefile.inc
+
+clobber::
+	@rm -f *.spr

Binary/CPM3/ReadMe.txt

@@ -0,0 +1,17 @@
+***********************************************************************
+***                                                                 ***
+***                          R o m W B W                            ***
+***                                                                 ***
+***                    Z80/Z180 System Software                     ***
+***                                                                 ***
+***********************************************************************
+
+This directory contains the CP/M 3 system files for the RomWBW CP/M 3
+adaptation.  All of these files are already included on the CP/M 3
+boot disk images.  However if you are creating a CP/M 3 boot disk
+manually, you should copy all of these files to the boot disk.
+
+These files should also be copied to any CP/M 3 boot disks on your
+system when you upgrade your ROM firmware.  Some of these files
+*must* match the version of the RomWBW firmware you are using for
+proper operation of your system.

Binary/Clean.cmd

@@ -11,3 +11,5 @@ if exist *.log del *.log
 if exist *.eeprom del *.eeprom
 
 setlocal & cd Apps && call Clean || exit /b 1 & endlocal
+setlocal & cd CPM3 && call Clean || exit /b 1 & endlocal
+setlocal & cd ZPM3 && call Clean || exit /b 1 & endlocal

Binary/DiskList.txt

@@ -17,6 +17,12 @@ a floppy or hard/CF/SD disk.  You can use your modern computer
 media.  The disk media will then be ready to use in your RomWBW
 System.
 
+WARNING: The hdnew_*.img disk images are part of a new disk
+format that is a work in progress.  Do not use these disk
+images without knowing exactly what you are doing!  The
+hd_*.img disk images continue to be the images you should
+be using under normal circumstances.
+
 A description of the disk images is provided later in this file.
 For more information on the creatioin of these images including
 instructions for customizing them or creating your own, refer to

Binary/Makefile

@@ -1,8 +1,8 @@
 TOOLS = ../Tools
 MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.img *.rom *.com *.eeprom)
-SUBDIRS = Apps
+SUBDIRS = Apps CPM3 ZPM3
 
 include $(TOOLS)/Makefile.inc
 
 clobber::
-	rm -f *.bin *.com *.img *.rom *.pdf *.log *.eeprom
+	@rm -f *.bin *.com *.img *.rom *.pdf *.log *.eeprom

Binary/ReadMe.txt

@@ -92,6 +92,12 @@ intended to be copied to the start of any type of hard disk media
 (typically a CF Card or SD Card). The resulting media will be usable 
 on any RomWBW-based system that accepts the corresponding media type.
 
+WARNING: The hdnew_*.img disk images are part of a new disk
+format that is a work in progress.  Do not use these disk
+images without knowing exactly what you are doing!  The
+hd_*.img disk images continue to be the images you should
+be using under normal circumstances.
+
 Documentation of the pre-built disk images is contained in the 
 DiskList.txt file in this directory.
 

Binary/ZPM3/Clean.cmd

@@ -0,0 +1,10 @@
+@echo off
+setlocal
+
+if exist *.spr del *.spr
+if exist *.com del *.com
+if exist *.sys del *.sys
+if exist *.pat del *.pat
+if exist *.dat del *.dat
+if exist *.zpm del *.zpm
+if exist *.spr del *.spr

Binary/ZPM3/Makefile

@@ -0,0 +1,7 @@
+TOOLS = ../../Tools
+MOREDIFF := $(shell $(TOOLS)/unix/casefn.sh *.spr)
+
+include $(TOOLS)/Makefile.inc
+
+clobber::
+	@rm -f *.spr

Binary/ZPM3/ReadMe.txt

@@ -0,0 +1,17 @@
+***********************************************************************
+***                                                                 ***
+***                          R o m W B W                            ***
+***                                                                 ***
+***                    Z80/Z180 System Software                     ***
+***                                                                 ***
+***********************************************************************
+
+This directory contains the ZPM3 system files for the RomWBW ZPM3
+adaptation.  All of these files are already included on the ZPM3
+boot disk images.  However if you are creating a CP/M 3 boot disk
+manually, you should copy all of these files to the boot disk.
+
+These files should also be copied to any ZPM3 boot disks on your
+system when you upgrade your ROM firmware.  Some of these files
+*must* match the version of the RomWBW firmware you are using for
+proper operation of your system.

ReadMe.md

@@ -3,7 +3,7 @@
 ## Z80/Z180 System Software
 
 Version 3.1 Pre-release  
-Friday 8 May 2020
+Wednesday 13 May 2020
 
 Wayne Warthen <wwarthen@gmail.com>
 
@@ -1060,12 +1060,76 @@ your choice. This process is described below in the Disk Images section.
 If you wish to update existing disk media in your system, you need to
 perform the following steps.
 
-If the disk is bootable, you need to update the system tracks of the
-disk. This is done using a SYSCOPY command such as `SYSCOPY
-C:=B:ZSYS.SYS`. For a ZSDOS boot disk, use ZSYS.SYS. For a CP/M 2.2
-disk, use CPM.SYS. For a CP/M 3 or ZPM3 disk, use CPMLDR.SYS. CPMLDR.SYS
-is not provided on the ROM disk, so you will need to upload it from the
-distribution.
+If the disk is bootable, you need to update the system image on the disk
+using the procedure described below corresponsing to the operating
+system on your disk.
+
+  - **CP/M 2.2**
+    
+    Boot to CP/M 2.2 from ROM, then use `SYSCOPY` to update the system
+    image on **all** CP/M 2.2 boot disks/slices. The CP/M 2.2 system
+    image is called CPM.SYS and is found on the ROM disk. For example:
+    
+    `B>SYSCOPY C:=CPM.SYS`
+
+  - **ZSDOS**
+    
+    Boot to Z-System from ROM, then use `SYSCOPY` to update the system
+    image on **all** ZSDOS boot disks/slices. The ZSDOS system image is
+    called ZSYS.SYS and is found on the ROM disk. For example:
+    
+    `B>SYSCOPY C:=ZSYS.SYS`
+
+  - **NZCOM**
+    
+    NZCOM runs on top of either CP/M 2.2 or ZSDOS. By default, the
+    RomWBW disk image for NZCOM uses ZSDOS. Follow the corresponding
+    procedure above to update the system image on the NZCOM boot
+    disks/slices.
+
+  - **CP/M 3**
+    
+    CP/M 3 uses a multi-step boot process involving multiple files. The
+    CP/M 3 boot files are not included on the ROM disk due to space
+    constraints. You will need to transfer the files to your system from
+    the RomWBW distribution directory Binary\\CPM3.
+    
+    After this is done, you will need to use `SYSCOPY` to place the CP/M
+    3 loader image on the boot tracks of all CP/M 3 boot disks/slices.
+    The loader image is called `CPMLDR.SYS`. You must then copy (at a
+    minimum) `CPM3.SYS` and `CCP.COM` onto the disk/slice. Assuming you
+    copied the CP/M 3 boot files onto your RAM disk at A:, you would
+    use:
+    
+        A>B:SYSCOPY C:=CPMLDR.SYS
+        A>B:COPY CPM3.SYS C:
+        A>B:COPY CCP.COM C:
+
+  - **ZPM3**
+    
+    ZPM3 uses a multi-step boot process involving multiple files. The
+    ZPM3 boot files are not included on the ROM disk due to space
+    constraints. You will need to transfer the files to your system from
+    the RomWBW distribution directory Binary\\ZPM3.
+    
+    After this is done, you will need to use `SYSCOPY` to place the ZPM3
+    loader image on the boot tracks of all ZPM3 boot disks/slices. The
+    loader image is called `CPMLDR.SYS`. You must then copy (at a
+    minimum) `CPM3.SYS`, `ZCCP.COM`, `ZINSTAL.ZPM`, and `STARTZPM.COM`
+    onto the disk/slice. Assuming you copied the ZPM3 boot files onto
+    your RAM disk at A:, you would use:
+    
+        A>B:SYSCOPY C:=CPMLDR.SYS
+        A>B:COPY CPM3.SYS C:
+        A>B:COPY ZCCP.COM C:
+        A>B:COPY ZINSTAL.ZPM C:
+        A>B:COPY STARTZPM.COM C:
+    
+    You may be wondering if the references to `CPMLDR.SYS` and
+    `CPM3.SYS` are typos. They are not. ZPM3 uses the same loader image
+    as CPM3. The ZPM3 main system code file is called `CPM3.SYS` which
+    is the same name as CP/M 3 uses, but the file contents are not the
+    same.
 
 Finally, if you have copies of any of the RomWBW custom applications on
 your hard disk, you need to update them with the latest copies. The

ReadMe.txt

@@ -3,7 +3,7 @@ RomWBW
 Z80/Z180 System Software
 
 Version 3.1 Pre-release
-Friday 8 May 2020
+Wednesday 13 May 2020
 
 Wayne Warthen wwarthen@gmail.com
 
@@ -1084,12 +1084,74 @@ your choice. This process is described below in the Disk Images section.
 If you wish to update existing disk media in your system, you need to
 perform the following steps.
 
-If the disk is bootable, you need to update the system tracks of the
-disk. This is done using a SYSCOPY command such as
-SYSCOPY C:=B:ZSYS.SYS. For a ZSDOS boot disk, use ZSYS.SYS. For a CP/M
-2.2 disk, use CPM.SYS. For a CP/M 3 or ZPM3 disk, use CPMLDR.SYS.
-CPMLDR.SYS is not provided on the ROM disk, so you will need to upload
-it from the distribution.
+If the disk is bootable, you need to update the system image on the disk
+using the procedure described below corresponsing to the operating
+system on your disk.
+
+-   CP/M 2.2
+
+    Boot to CP/M 2.2 from ROM, then use SYSCOPY to update the system
+    image on all CP/M 2.2 boot disks/slices. The CP/M 2.2 system image
+    is called CPM.SYS and is found on the ROM disk. For example:
+
+    B>SYSCOPY C:=CPM.SYS
+
+-   ZSDOS
+
+    Boot to Z-System from ROM, then use SYSCOPY to update the system
+    image on all ZSDOS boot disks/slices. The ZSDOS system image is
+    called ZSYS.SYS and is found on the ROM disk. For example:
+
+    B>SYSCOPY C:=ZSYS.SYS
+
+-   NZCOM
+
+    NZCOM runs on top of either CP/M 2.2 or ZSDOS. By default, the
+    RomWBW disk image for NZCOM uses ZSDOS. Follow the corresponding
+    procedure above to update the system image on the NZCOM boot
+    disks/slices.
+
+-   CP/M 3
+
+    CP/M 3 uses a multi-step boot process involving multiple files. The
+    CP/M 3 boot files are not included on the ROM disk due to space
+    constraints. You will need to transfer the files to your system from
+    the RomWBW distribution directory Binary\CPM3.
+
+    After this is done, you will need to use SYSCOPY to place the CP/M 3
+    loader image on the boot tracks of all CP/M 3 boot disks/slices. The
+    loader image is called CPMLDR.SYS. You must then copy (at a minimum)
+    CPM3.SYS and CCP.COM onto the disk/slice. Assuming you copied the
+    CP/M 3 boot files onto your RAM disk at A:, you would use:
+
+        A>B:SYSCOPY C:=CPMLDR.SYS
+        A>B:COPY CPM3.SYS C:
+        A>B:COPY CCP.COM C:
+
+-   ZPM3
+
+    ZPM3 uses a multi-step boot process involving multiple files. The
+    ZPM3 boot files are not included on the ROM disk due to space
+    constraints. You will need to transfer the files to your system from
+    the RomWBW distribution directory Binary\ZPM3.
+
+    After this is done, you will need to use SYSCOPY to place the ZPM3
+    loader image on the boot tracks of all ZPM3 boot disks/slices. The
+    loader image is called CPMLDR.SYS. You must then copy (at a minimum)
+    CPM3.SYS, ZCCP.COM, ZINSTAL.ZPM, and STARTZPM.COM onto the
+    disk/slice. Assuming you copied the ZPM3 boot files onto your RAM
+    disk at A:, you would use:
+
+        A>B:SYSCOPY C:=CPMLDR.SYS
+        A>B:COPY CPM3.SYS C:
+        A>B:COPY ZCCP.COM C:
+        A>B:COPY ZINSTAL.ZPM C:
+        A>B:COPY STARTZPM.COM C:
+
+    You may be wondering if the references to CPMLDR.SYS and CPM3.SYS
+    are typos. They are not. ZPM3 uses the same loader image as CPM3.
+    The ZPM3 main system code file is called CPM3.SYS which is the same
+    name as CP/M 3 uses, but the file contents are not the same.
 
 Finally, if you have copies of any of the RomWBW custom applications on
 your hard disk, you need to update them with the latest copies. The

Source/CPM3/Build.cmd

@@ -101,3 +101,23 @@ rem Loader
 tasm -t80 -g3 -fFF loader.asm loader.bin loader.lst
 
 copy /b loader.bin + cpmldr.bin cpmldr.sys
+
+rem Copy OS files to Binary directory
+
+copy cpmldr.com ..\..\Binary\CPM3
+copy cpmldr.sys ..\..\Binary\CPM3
+copy ccp.com ..\..\Binary\CPM3
+copy gencpm.com ..\..\Binary\CPM3
+copy genres.dat ..\..\Binary\CPM3
+copy genbnk.dat ..\..\Binary\CPM3
+copy bios3.spr ..\..\Binary\CPM3
+copy bnkbios3.spr ..\..\Binary\CPM3
+copy bdos3.spr ..\..\Binary\CPM3
+copy bnkbdos3.spr ..\..\Binary\CPM3
+copy resbdos3.spr ..\..\Binary\CPM3
+copy cpm3res.sys ..\..\Binary\CPM3
+copy cpm3bnk.sys ..\..\Binary\CPM3
+copy gencpm.dat ..\..\Binary\CPM3
+copy cpm3.sys ..\..\Binary\CPM3
+copy readme.1st ..\..\Binary\CPM3
+copy cpm3fix.pat ..\..\Binary\CPM3

Source/CPM3/Makefile

@@ -4,11 +4,19 @@
 #
 # it does this by overriding OBJECTS in an invoked sub-make
 #
-OBJECTS = cpmldr.com cpmldr.sys cpm3res cpm3bnk zpmbios3 cpm3.sys gencpm.dat
-OTHERS = cpmldr.rel biosldr.rel cpm3res.sys cpm3bnk.sys zpmbios3.spr loader.bin cpmldr.bin
+OBJECTS = cpmldr.com cpmldr.sys cpm3res.sys cpm3bnk.sys zpmbios3
+OBJECTS += ccp.com gencpm.com genres.dat genbnk.dat
+OBJECTS += bdos3.spr bnkbdos3.spr resbdos3.spr
+OBJECTS += readme.1st cpm3fix.pat cpm3.sys gencpm.dat
+NOCOPY = zpmbios3
+OTHERS = cpmldr.rel biosldr.rel cpm3res.sys cpm3bnk.sys loader.bin cpmldr.bin
 OTHERS += biosldrc.rel biosldrd.rel
+NODELETE = ccp.com gencpm.com genres.dat genbnk.dat bdos3.spr bnkbdos3.spr resbdos3.spr
+NODELETE += readme.1st cpm3fix.pat
 
+DEST = ../../Binary/CPM3
 TOOLS = ../../Tools
+
 include $(TOOLS)/Makefile.inc
 
 export ZXINCDIR = ../
@@ -25,11 +33,11 @@ DEFCPM3 = bnk
 
 clean:: biosclean
 	@rm -f bios3.spr bnkbios3.spr zpmbios3.spr cpmldr.com gencpm.dat options.lib ldropts.lib
-
+	
 biosclean:
 	@rm -f $(BIOSOBJS)
 
-cpm3res:
+cpm3res.sys:
 	make biosclean
 	cp optres.lib options.lib
 	cp genres.dat gencpm.dat
@@ -38,7 +46,7 @@ cpm3res:
 	mv cpm3.sys cpm3res.sys
 	rm gencpm.dat
 
-cpm3bnk:
+cpm3bnk.sys:
 	make biosclean
 	cp optbnk.lib options.lib
 	cp genbnk.dat gencpm.dat
@@ -50,9 +58,7 @@ cpm3bnk:
 zpmbios3:
 	make biosclean
 	cp optzpm.lib options.lib
-	cp genbnk.dat gencpm.dat
-	make OBJECTS=zpmbios3.spr
-	rm gencpm.dat
+	make OBJECTS=zpmbios3.spr DEST=
 
 cpmldr.bin:	biosldrd.rel cpmldr.rel
 	$(ZXCC) $(TOOLS)/cpm/bin/LINK -CPMLDRD[L100]=CPMLDR,BIOSLDRD
@@ -83,9 +89,12 @@ zpmbios3.spr: $(BIOSOBJS)
 
 cpm3.sys: cpm3$(DEFCPM3).sys
 	cp cpm3$(DEFCPM3).sys cpm3.sys
+	rm -f /tmp/casefn.cache
 
 gencpm.dat: gen$(DEFCPM3).dat
 	cp gen$(DEFCPM3).dat gencpm.dat
-
+	rm -f /tmp/casefn.cache
+	
 cpmldr.sys: loader.bin cpmldr.bin
 	cat loader.bin cpmldr.bin > $@
+

Source/Doc/GettingStarted.md

@@ -1114,12 +1114,81 @@ your choice. This process is described below in the Disk Images
 section. If you wish to update existing disk media in your system, you
 need to perform the following steps.
 
-If the disk is bootable, you need to update the system tracks of the
-disk. This is done using a SYSCOPY command such as `SYSCOPY
-C:=B:ZSYS.SYS`. For a ZSDOS boot disk, use ZSYS.SYS. For a CP/M 2.2
-disk, use CPM.SYS. For a CP/M 3 or ZPM3 disk, use CPMLDR.SYS.
-CPMLDR.SYS is not provided on the ROM disk, so you will need to
-upload it from the distribution.
+If the disk is bootable, you need to update the system image on the
+disk using the procedure described below corresponsing to the
+operating system on your disk.
+
+* **CP/M 2.2**
+
+  Boot to CP/M 2.2 from ROM, then use `SYSCOPY` to update the system
+  image on **all** CP/M 2.2 boot disks/slices.  The CP/M 2.2 system image
+  is called CPM.SYS and is found on the ROM disk.  For example:
+  
+  `B>SYSCOPY C:=CPM.SYS`
+
+* **ZSDOS**
+
+  Boot to Z-System from ROM, then use `SYSCOPY` to update the system
+  image on **all** ZSDOS boot disks/slices.  The ZSDOS system image
+  is called ZSYS.SYS and is found on the ROM disk.  For example:
+  
+  `B>SYSCOPY C:=ZSYS.SYS`
+
+* **NZCOM**
+
+  NZCOM runs on top of either CP/M 2.2 or ZSDOS.  By default, the
+  RomWBW disk image for NZCOM uses ZSDOS.  Follow the corresponding
+  procedure above to update the system image on the NZCOM boot
+  disks/slices.
+
+* **CP/M 3**
+
+  CP/M 3 uses a multi-step boot process involving multiple files.
+  The CP/M 3 boot files are not included on the ROM disk due to
+  space constraints.  You will need to transfer the files to your
+  system from the RomWBW distribution directory Binary\\CPM3.
+  
+  After this is done, you will need to use `SYSCOPY` to place
+  the CP/M 3 loader image on the boot tracks of all CP/M 3
+  boot disks/slices.  The loader image is called `CPMLDR.SYS`.
+  You must then copy (at a minimum) `CPM3.SYS` and `CCP.COM`
+  onto the disk/slice.  Assuming you copied the CP/M 3 boot files
+  onto your RAM disk at A:, you would use:
+  
+  ```
+  A>B:SYSCOPY C:=CPMLDR.SYS
+  A>B:COPY CPM3.SYS C:
+  A>B:COPY CCP.COM C:
+  ```
+
+* **ZPM3**
+
+  ZPM3 uses a multi-step boot process involving multiple files.
+  The ZPM3 boot files are not included on the ROM disk due to
+  space constraints.  You will need to transfer the files to your
+  system from the RomWBW distribution directory Binary\\ZPM3.
+  
+  After this is done, you will need to use `SYSCOPY` to place
+  the ZPM3 loader image on the boot tracks of all ZPM3
+  boot disks/slices.  The loader image is called `CPMLDR.SYS`.
+  You must then copy (at a minimum) `CPM3.SYS`, `ZCCP.COM`,
+  `ZINSTAL.ZPM`, and `STARTZPM.COM` onto the disk/slice.
+  Assuming you copied the ZPM3 boot files onto your RAM disk
+  at A:, you would use:
+  
+  ```
+  A>B:SYSCOPY C:=CPMLDR.SYS
+  A>B:COPY CPM3.SYS C:
+  A>B:COPY ZCCP.COM C:
+  A>B:COPY ZINSTAL.ZPM C:
+  A>B:COPY STARTZPM.COM C:
+  ```
+  
+  You may be wondering if the references to `CPMLDR.SYS` and
+  `CPM3.SYS` are typos.  They are not.  ZPM3 uses the same loader
+  image as CPM3.  The ZPM3 main system code file is called `CPM3.SYS`
+  which is the same name as CP/M 3 uses, but the file contents are
+  not the same.
 
 Finally, if you have copies of any of the RomWBW custom applications
 on your hard disk, you need to update them with the latest copies. The

Source/HBIOS/cfg_state.inc

@@ -4,19 +4,19 @@
 
 SYSTIMEN	.EQU	FALSE
 
-#IF (CTCENABLE & INTMODE == 2 & CTCTIMER)
+#IF (CTCENABLE & (INTMODE == 2) & (CTCTIMER))
 SYSTIMEN	.SET	TRUE
 #ENDIF
 
-#IF (TMSENABLE & INTMODE == 1 & TMSTIMENABLE)
+#IF (TMSENABLE & (INTMODE == 1) & TMSTIMENABLE)
 SYSTIMEN	.SET	TRUE
 #ENDIF
 
-#IF (INTMODE == 1 & PLATFORM == PLT_SBC & HTIMENABLE)
+#IF ((INTMODE == 1) & (PLATFORM == PLT_SBC) & HTIMENABLE)
 SYSTIMEN	.SET	TRUE
 #ENDIF
 
-#IF (INTMODE == 2 & CPUFAM == CPU_Z180)
+#IF ((INTMODE == 2) & (CPUFAM == CPU_Z180))
 SYSTIMEN	.SET	TRUE
 #ENDIF
 

Source/ZPM3/Build.cmd

@@ -19,7 +19,8 @@ copy ..\CPM3\zpmbios3.spr bnkbios3.spr
 copy ..\CPM3\gencpm.com .
 copy ..\CPM3\biosldrd.rel .
 copy ..\CPM3\biosldrc.rel .
-rem copy ..\CPM3\cpmldr.com .
+copy ..\CPM3\cpmldr.com .
+copy ..\CPM3\cpmldr.sys .
 
 rem ZPM Loader
 echo.
@@ -46,3 +47,22 @@ rem Loader
 tasm -t80 -g3 -fFF loader.asm loader.bin loader.lst
 
 copy /b loader.bin + zpmldr.bin zpmldr.sys
+
+rem Copy OS files to Binary directory
+
+copy zpmldr.com ..\..\Binary\ZPM3
+copy zpmldr.sys ..\..\Binary\ZPM3
+copy cpmldr.com ..\..\Binary\ZPM3
+copy cpmldr.sys ..\..\Binary\ZPM3
+copy autotog.com ..\..\Binary\ZPM3
+copy clrhist.com ..\..\Binary\ZPM3
+copy setz3.com ..\..\Binary\ZPM3
+copy cpm3.sys ..\..\Binary\ZPM3
+copy zccp.com ..\..\Binary\ZPM3
+copy zinstal.zpm ..\..\Binary\ZPM3
+copy startzpm.com ..\..\Binary\ZPM3
+copy makedos.com ..\..\Binary\ZPM3
+copy gencpm.dat ..\..\Binary\ZPM3
+copy bnkbios3.spr ..\..\Binary\ZPM3
+copy bnkbdos3.spr ..\..\Binary\ZPM3
+copy resbdos3.spr ..\..\Binary\ZPM3

Source/ZPM3/Makefile

@@ -1,10 +1,12 @@
 OBJECTS = zpmldr.com zpmldr.sys cpm3.sys startzpm.com zccp.com
-ifdef REBUILD_ZPM_TOOLS
+#ifdef REBUILD_ZPM_TOOLS
 OBJECTS += setz3.com clrhist.com autotog.com
-else
-NODELETE = setz3.com clrhist.com autotog.com
-endif
-OTHERS = zpmldr.bin loader.bin biosldrd.rel biosldrc.rel gencpm.com gencpm.dat bnkbios3.spr
+#else
+NODELETE = setz3.com clrhist.com autotog.com makedos.com zinstal.zpm bnkbdos3.spr resbdos3.spr
+#endif
+OBJECTS += cpmldr.com cpmldr.sys zinstal.zpm makedos.com gencpm.dat bnkbios3.spr bnkbdos3.spr resbdos3.spr
+OTHERS = zpmldr.bin loader.bin biosldrd.rel biosldrc.rel gencpm.com
+DEST = ../../Binary/ZPM3/
 TOOLS =../../Tools
 
 include $(TOOLS)/Makefile.inc
@@ -47,8 +49,8 @@ zinstal.zpm: ../ZCCP/zinstal.zpm
 startzpm.com: ../ZCCP/startzpm.com
 	cp $< $@
 
-setz3.com: setz3.z80
-
-clrhist.com: clrhist.z80
+cpmldr.com: ../CPM3/cpmldr.com
+	cp $< $@
 
-autotog.com: autotog.z80
+cpmldr.sys: ../CPM3/cpmldr.sys
+	cp $< $@

Source/ver.inc

@@ -2,4 +2,4 @@
 #DEFINE	RMN	1
 #DEFINE	RUP	1
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.1.1-pre.8"
+#DEFINE BIOSVER	"3.1.1-pre.9"

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	1
 rup	equ	1
 rtp	equ	0
 biosver	macro
-	db	"3.1.1-pre.8"
+	db	"3.1.1-pre.9"
 	endm

Tools/Makefile.inc

@@ -112,7 +112,7 @@ all:: $(OBJECTS)
 	@for dir in $(SUBDIRS) ; do \
 		( echo "building in `pwd`/$$dir" ; $(MAKE) --directory "$$dir" all ) ; \
 	done
-	@if [ "$(DEST)" ] ; then for file in $(OBJECTS) ; do \
+	@if [ "$(DEST)" ] ; then for file in $(filter-out $(NOCOPY),$(OBJECTS)) ; do \
 		mkdir -p $(DEST) ; \
 		echo copy $$file to $(DEST) ; \
 		cp $$($(CASEFN) $$file) $(DEST) ; \