MirrorRepos/RomWBW
1
0
Fork 1
mirror of https://github.com/wwarthen/RomWBW.git synced 2026-02-06 14:11:48 -06:00
Code Issues Projects Releases Wiki Activity

More Documentation Updates

Browse Source
This commit is contained in:
Wayne Warthen
2023-02-11 19:13:52 -08:00
parent fee6f29cf0
commit 3034fb6b5b
4 changed files with 516 additions and 459 deletions
Download Patch File Download Diff File Expand all files Collapse all files

715
Source/Doc/UserGuide.md
View File

@@ -173,34 +173,35 @@ The Binary directory of the distribution contains the pre-built ROM and
disk images. The ROM image files all end in ".rom". Based on the table
below, **carefully** pick the appropriate ROM image for your hardware.
| **Description** | **ROM Image File** | **Baud Rate** |
|-------------------------------------------------- |--------------------|--------------:|
| RetroBrew Z80 SBC^1^ for ECB Bus | SBC_std.rom | 38400 |
| RetroBrew Zeta V1 Z80 SBC^2^, ParPortProp | ZETA_std.rom | 38400 |
| RetroBrew Zeta V2 Z80 SBC^2^, ParPortProp | ZETA2_std.rom | 38400 |
| RetroBrew N8 Z180^1^ (date code >= 2312) | N8_std.rom | 38400 |
| RetroBrew Mark IV^3^ Z180 for ECB Bus | MK4_std.rom | 38400 |
| RCBus Z80 CPU Module^4^, 512K RAM/ROM | RCZ80_std.rom | 115200 |
| RCBus Z80 CPU Module^4^, 512K RAM/ROM, DUART | RCZ80_duart.rom | 115200 |
| RCBus Z80 CPU Module^4^, 512K RAM/ROM, MT011 | RCZ80_mt.rom | 115200 |
| RCBus Z80 CPU Module^4^, 512K RAM/ROM, KIO | RCZ80_kio.rom | 115200 |
| RCBus Z180 CPU Module^4^ w/ external banking | RCZ180_ext.rom | 115200 |
| RCBus Z180 CPU Module^4^ w/ native banking | RCZ180_nat.rom | 115200 |
| RCBus Z280 CPU Module^4^ w/ external banking | RCZ180_ext.rom | 115200 |
| RCBus Z280 CPU Module^4^ w/ native banking | RCZ180_nat.rom | 115200 |
| Easy Z80 SBC^2^ w/ RCBus | EZZ80_std.rom | 115200 |
| Tiny EIPC Z80 SBC^2^ w/ RCBus | EZZ80_tz80.rom | 115200 |
| Z80-512K CPU/RAM/ROM Module^2^ for RCBus | EZZ80_skz.rom | 115200 |
| SC126 Z180 SBC^5^ w/ BP80 Bus | SCZ180_126.rom | 115200 |
| SC130 Z180 SBC^5^ w/ RCBus | SCZ180_130.rom | 115200 |
| SC131 Z180 Pocket Computer^5^ | SCZ180_131.rom | 115200 |
| SC140 Z180 CPU Module^5^ for Z50Bus | SCZ180_140.rom | 115200 |
| Dyno Z180 SBC^6^ w/ Dyno Bus | DYNO_std.rom | 38400 |
| Nhyodyne Z80 MBC^1^ | MBC_std.rom | 38400 |
| Rhyophyre Z180 SBC^1^ | RPH_std.rom | 38400 |
| Z80 ZRC^7^ for RCBus | RCZ80_zrc.rom | 115200 |
| Z280 ZZRCC^7^ for RCBus | RCZ280_nat_zzr.rom | 115200 |
| Z280 ZZ80MB SBC^7^ w/ RCBus | RCZ280_nat_zz.rom | 115200 |
| **Description** | **Bus** | **ROM Image File** | **Baud Rate** |
|----------------------------------------------------------------|---------|--------------------|--------------:|
| [RetroBrew Z80 SBC]^1^ | ECB | SBC_std.rom | 38400 |
| [RetroBrew Z80 SimH]^1^ | - | SBC_simh.rom | 38400 |
| [RetroBrew Zeta Z80 SBC]^2^, ParPortProp | - | ZETA_std.rom | 38400 |
| [RetroBrew Zeta V2 Z80 SBC]^2^, ParPortProp | - | ZETA2_std.rom | 38400 |
| [RetroBrew N8 Z180 SBC]^1^ (date code >= 2312) | ECB | N8_std.rom | 38400 |
| [RetroBrew Mark IV Z180 SBC]^3^ | ECB | MK4_std.rom | 38400 |
| [RCBus Z80 CPU Module]^4^, 512K RAM/ROM | RCBus | RCZ80_std.rom | 115200 |
| [RCBus Z80 CPU Module]^4^, 512K RAM/ROM, DUART | RCBus | RCZ80_duart.rom | 115200 |
| [RCBus Z80 CPU Module]^4^, 512K RAM/ROM, MT011 | RCBus | RCZ80_mt.rom | 115200 |
| [RCBus Z80 CPU Module]^4^, 512K RAM/ROM, KIO | RCBus | RCZ80_kio.rom | 115200 |
| [RCBus Z180 CPU Module]^4^ w/ external banking | RCBus | RCZ180_ext.rom | 115200 |
| [RCBus Z180 CPU Module]^4^ w/ native banking | RCBus | RCZ180_nat.rom | 115200 |
| [RCBus Z280 CPU Module]^4^ w/ external banking | RCBus | RCZ180_ext.rom | 115200 |
| [RCBus Z280 CPU Module]^4^ w/ native banking | RCBus | RCZ180_nat.rom | 115200 |
| [Easy Z80 SBC]^2^ | RCBus | EZZ80_std.rom | 115200 |
| [Tiny Z80 EIPC SBC]^2^ | RCBus | EZZ80_tz80.rom | 115200 |
| [Z80-512K CPU/RAM/ROM Module]^2^ | RCBus | RCZ80_skz.rom | 115200 |
| [SC126 Z180 SBC]^5^ | BP80 | SCZ180_126.rom | 115200 |
| [SC130 Z180 SBC]^5^ | RCBus | SCZ180_130.rom | 115200 |
| [SC131 Z180 Pocket Computer]^5^ | - | SCZ180_131.rom | 115200 |
| [SC140 Z180 CPU Module]^5^ | Z50 | SCZ180_140.rom | 115200 |
| [Dyno Z180 SBC]^6^ | Dyno | DYNO_std.rom | 38400 |
| [Nhyodyne Z80 MBC]^1^ | MBC | MBC_std.rom | 38400 |
| [Rhyophyre Z180 SBC]^1^ | - | RPH_std.rom | 38400 |
| [Z80 ZRC CPU Module]^7^ | RCBus | RCZ80_zrc.rom | 115200 |
| [Z280 ZZRCC CPU Module]^7^ | RCBus | RCZ280_nat_zzr.rom | 115200 |
| [Z280 ZZ80MB SBC]^7^ | RCBus | RCZ280_nat_zz.rom | 115200 |
| ^1^Designed by Andrew Lynch
| ^2^Designed by Sergey Kiselev
@@ -213,6 +214,10 @@ below, **carefully** pick the appropriate ROM image for your hardware.
RCBus refers to Spencer Owen's RC2014 bus specification and derivatives
including RC26, RC40, RC80, and BP80.
Additional information for each of the system configurations supported
by the ROM images listed above is found in
[Appendix A - Pre-built ROM Images].
The RCBus Z180 & Z280 require a separate RAM/ROM memory module. There
are two types of these modules and you must pick the correct ROM for
your type of memory module. The first option is the same as the 512K
@@ -246,8 +251,7 @@ emulation.
RomWBW will automatically attempt to detect and support typical add-on
components for each of the systems supported. More information on the
required system configuration and optional supported components for
each ROM is found in the file called "RomList.txt" in the Binary
directory.
each ROM is found in [Appendix A - Pre-built ROM Images].
## System Startup
@@ -3130,202 +3134,515 @@ each platform as documented below. If the device or peripheral is
not detected at boot, the ROM will simply bypass support
appropriately.
#### SBC (SBC_std.rom)
By default, RomWBW will use the first available character device it
discovers for the initial console. Serial devices are scanned in
the following order:
- CPU speed is detected at startup
- Console on onboard UART serial port at 38400 baud
- Includes support for PPIDE/CF Card(s) connected to on-board
parallel port.
- Includes support for CVDU and VGA3 boards. If detected at
startup, support for video and keyboard is installed
including VT-100/ANSI terminal emulation.
- Auto detects DiskIO v3 floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Auto-detects PropIO or PropIO V2 and installs associated
video, keyboard and SD Card support if present.
- If PropIO, PropIO V2, CVDU, or VGA hardware is detected,
initial console output is determined by JP2. If JP2 is
shorted, console will go to on-board serial port, if JP2
is open, console will go to the detected video and keyboard
ports.
#. ASCI: Zilog Z180 CPU Built-in Serial Ports
#. Z2U: Zilog Z280 CPU Built-in Serial Ports
#. UART: 16C550 Family Serial Interface
#. DUART: SCC2681 or compatible Dual UART
#. SIO: Zilog Serial Port Interface
#. ACIA: MC68B50 Asynchronous Communications Interface Adapter
In some cases, support for multiple hardware components with potentially
conflicting resource usage are handled by a single ROM image. It is up
to the user to ensure that no conflicting hardware is in use.
`\clearpage`{=latex}
### RetroBrew Z80 SBC
| | |
|-------------------|---------------|
| ROM Image File | SBC_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is detected at startup if DS1302 RTC is active
- Hardware auto-detected:
- Onboard DS1302 RTC
- Onboard UART Serial Adapter
- Onboard PPIDE Hard Disk Interface
- Zilog Peripherals SIO Serial Interface
- CVDU Display Adapter
- VGA3 Display Adapter
- DiskIO V3 Floppy Disk Controller w/ 3.5" HD Drives
- PropIO Video, Keyboard, & SD Card
- SBC V1 has a known race condition in the bank switching
circuit which is likely to cause system instability. SBC
V2 does not have this issue.
`\clearpage`{=latex}
#### SBC (SBC_simh.rom)
### RetroBrew Z80 SimH
- SBC variant customized to run under SimH
- Implments two emulated SimH hard disk images
- Uses SimH RTC
| | |
|-------------------|---------------|
| ROM Image File | SBC_simh.rom |
| Console Baud Rate | 38400 |
#### ZETA (ZETA_std.rom)
- Hardware auto-detected:
- SimH emulated 8250 Serial Adapter
- SimH emulated hard disk drives
- SimH RTC
`\clearpage`{=latex}
- CPU speed is detected at startup
- Console on onboard UART serial port at 38400 baud
- Auto-detects FDC and installs 3.5" disk support
if found
- Auto detects on-board floppy disk controller and installs
support for one attached 3.5" floppy disk if found
- Auto-detects ParPortProp and includes support for it if it
is attached.
- If ParPortProp is installed, initial console output is
determined by JP1. If JP1 is shorted, console will go to
on-board serial port, if JP1 is open, console will go to
ParPortProp video and keyboard ports.
### RetroBrew Zeta Z80 SBC
#### ZETA2 (ZETA2_std.rom)
| | |
|-------------------|---------------|
| ROM Image File | ZETA_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is detected at startup
- Console on onboard UART serial port at 38400 baud
- Auto detects on-board floppy disk controller and installs
support for one attached 3.5" floppy disk if found
- Auto-detects ParPortProp and includes support for it if it
is attached.
- Uses CTC to generate periodic timer interrupts.
- If ParPortProp is installed, initial console output is
determined by JP1. If JP1 is shorted, console will go to
on-board serial port, if JP1 is open, console will go to
ParPortProp video and keyboard ports.
- CPU speed is detected at startup if DS1302 RTC is active
- Hardware auto-detected:
- Onboard DS1302 RTC
- Onboard UART Serial Adapter
- Onboard Floppy Disk Controller w/ 1 3.5" HD Drive
- ParPortProp Video, Keyboard, & SD Card
- If ParPortProp is installed, initial console output is determined
by JP1:
- Shorted: console to on-board serial port
- Open: console to ParPortProp video and keyboard
#### N8 (N8_std.rom)
`\clearpage`{=latex}
- CPU speed is detected at startup
- Console on Z180 onboard primary ASCI serial port at 38400 baud
- Auto detects onboard floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Includes support for on-board TMS9918 video and keyboard
including VT-100/ANSI terminal emulation.
- Includes support for on-board SD Card as hard disk and
assumes a production level N8 board (date code >= 2312).
### RetroBrew Zeta V2 Z80 SBC
#### MK4 (MK4_std.rom)
| | |
|-------------------|---------------|
| ROM Image File | ZETA2_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is detected at startup
- Console on Z180 onboard primary ASCI serial port at 38400 baud
- Includes support for on-board IDE port (CF Card via adapter).
- Includes support for on-board SD Card port.
- Auto detects Dual IDE floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Auto-detects PropIO or PropIO V2 and installs associated
video, keyboard and SD Card support if present.
- Includes support for CVDU and VGA3 boards. If detected at
startup, support for video and keyboard is installed
including VT-100/ANSI terminal emulation.
- CPU speed is detected at startup if DS1302 RTC is active
- System timer is generated by onboard CTC
- Hardware auto-detected:
- Onboard DS1302 RTC
- Onboard CTC
- Onboard UART Serial Adapter
- Onboard Floppy Disk Controller w/ 1 3.5" HD Drive
- ParPortProp Video, Keyboard, & SD Card
- If ParPortProp is installed, initial console output is determined
by JP1:
- Shorted: console to on-board serial port
- Open: console to ParPortProp video and keyboard
#### RCZ80 (RCZ80_std.rom)
`\clearpage`{=latex}
- Assumes CPU oscillator of 7.3728 MHz
### RetroBrew N8 Z180 SBC
| | |
|-------------------|---------------|
| ROM Image File | N8_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is detected at startup if DS1302 RTC is active
- System timer is generated by Z180 CPU
- Hardware auto-detected:
- Onboard Z180 ASCI Serial Ports
- Onboard Floppy Disk Controller w/ 3.5" HD Drives
- Onboard TMS9918 Video Controller
- Onboard PS/2 Keyboard Controller
- Onboard SD Card Interface via CSIO
- Assumes N8 with date code >= 2312 for CSIO interface to SD Card
`\clearpage`{=latex}
### RetroBrew Mark IV Z180 SBC
| | |
|-------------------|---------------|
| ROM Image File | MK4_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is detected at startup if DS1302 RTC is active
- System timer is generated by Z180 CPU
- Hardware auto-detected:
- Onboard Z180 ASCI Serial Ports
- Onboard SD Card Interface via CSIO
- Onboard IDE CF Card Interface
- DIDE Floppy Disk Controller w/ 3.5" HD Drives
- DIDE IDE Hard Disk Controller
- PropIO Video, Keyboard, & SD Card
- CVDU Display Adapter
- VGA3 Display Adapter
`\clearpage`{=latex}
### RCBus Z80 CPU Module
| | |
|-------------------|---------------|
| ROM Image File | RCZ80_std.rom |
| Console Baud Rate | 115200 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 7.3728 MHz assumed
- Requires 512K RAM/ROM module
- Auto detects Serial I/O Module (ACIA), Dual Serial
Module (SIO/2), and EP Dual UART.
- Console on whichever serial module is installed,
order of priority is UART, SIO, then ACIA.
- Baud rate is determined by hardware, but normally 115200.
- Auto support for RC2014 Compact Flash Module
- Auto support for RC2014 PPIDE Module
- Support for Scott Baker SIO board may be enabled in config
- Auto detects WDC floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Support for SMC floppy controller may be enabled in config
- Support for J.B. Lang TMS9918 video card may be enabled in config
- Support for PropIO V2 may be enabled in config (PRPENABLE). If
enabled, will auto-detect and install associated
video, keyboard and SD Card support if present.
- Hardware auto-detected:
- DS1302 RTC
- ACIA Serial Interface Module
- SIO Serial Interface Module
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- AY-3-8910/YM2149 Sound Module
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- Serial baud rate is usually determined by hardware for ACIA and
SIO interfaces
#### RCZ80 w/ KIO (RCZ80_kio.rom)
| | |
|-------------------|---------------|
| ROM Image File | RCZ80_kio.rom |
| Console Baud Rate | 38400 |
- Same as RCZ80_std
- Requires KIO module
- SIO ports provided by KIO
- Equivalent to RCZ80_std w/ support for KIO Module:
- KIO-SIO Serial Interface uses KIO port standards
- KIO-CTC generates system timer
- SIO Serial baud rate managed by KIO-CTC
#### RCZ180 (RCZ180_nat.rom & RCZ180_ext.rom)
| | |
|-------------------|-----------------|
| ROM Image File | RCZ80_duart.rom |
| Console Baud Rate | 115200 |
- Assumes CPU oscillator of 18.432 MHz
- Console on Z180 onboard primary ASCI serial port at 115200 baud
- Auto support for RC2014 Compact Flash Module
- Auto support for RC2014 PPIDE Module
- Support for alternative serial modules may be enabled in config
- Auto detects WDC floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Support for SMC floppy controller may be enabled in config
- Support for J.B. Lang TMS9918 video card may be enabled in config
- You must pick the variant (_ext or _nat) depending
on which memory module you are using:
- RCZ180_ext.rom uses external bank management to access
memory, such as the 512K RAM/ROM module.
- RCZ180_nat.rom uses the built-in Z180 memory manager
for use with memory modules using direct physical
addressing of memory, such as the SC119.
- Support for PropIO V2 may be enabled in config (PRPENABLE). If
enabled, will auto-detect and install associated
video, keyboard and SD Card support if present.
- Equivalent to RCZ80_std w/ support for DUART Module:
- DUART serial interfaces supported
#### RCZ280 (RCZ280_ext.rom, RCZ280_nat.rom, RCZ280_nat_zz.rom)
| | |
|-------------------|---------------|
| ROM Image File | RCZ80_mt.rom |
| Console Baud Rate | 115200 |
- Assumes CPU oscillator of 24 MHz
- Bus clock will be 6 MHz or 12 MHz, so does not match RC2014 standard!!!
- Requires 512K RAM/ROM module (unless using ZZ80MB)
- Auto detects Serial I/O Module (ACIA), Dual Serial
Module (SIO), EP Dual UART (DUART), and built-in Z280 UART (Z2U).
- ACIA module is only supported on _ext variant.
- Built-in Z280 UART (Z2U) is buffered and interrupt driven only
on _nat and _nat_zz variants. It uses polling I/O on _ext.
- Console on whichever serial module is installed,
order of priority is Z2U, UART, SIO, DUART, ACIA
- Baud rate is determined by hardware, but normally 115200.
- Auto support for RC2014 Compact Flash Module
- Auto support for RC2014 PPIDE Module
- Support for Scott Baker SIO board may be enabled in config
- Auto detects WDC floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Support for SMC floppy controllers may be enabled in config
- Support for J.B. Lang TMS9918 video card may be enabled in config
- You must pick the variant (_ext, _nat, or _nat_zz) depending
on which platform or memory module you are using
- RCZ280_ext.rom uses external bank management to access
memory, such as the 512K RAM/ROM module.
- RCZ280_nat.rom uses the built-in Z280 memory manager
for use with memory modules using direct physical
addressing of memory, such as the SC119.
- RCZ280_nat_zz.rom is specifically for the ZZ80MB platform
which has both CPU and memory onboard.
- Support for PropIO V2 may be enabled in config (PRPENABLE). If
enabled, will auto-detect and install associated
video, keyboard and SD Card support if present.
- Equivalent to RCZ80_std w/ support for MT011 Module:
- MT011 SD Card interface supported
- MT011 provides a WizNet network interface which can be utilized
by the supplied RomwWBW CP/NET client software.
#### SCZ180 (SCZ180_126.rom, SCZ180_130.rom, SCZ180_131.rom, SCZ140.rom)
`\clearpage`{=latex}
- Same as RCZ180
- Adds auto support for onboard SPI SD Card
- The 4 different variants of SCZ180 are provided to match the
4 corresponding systems (SC126, SC130, SC131, and SC140)
designed by Stephen Cousins.
- Support for PropIO V2 may be enabled in config (PRPENABLE). If
enabled, will auto-detect and install associated
video, keyboard and SD Card support if present.
### RCBus Z180 CPU Module
#### EZZ80 (EZZ80_std.rom)
| | |
|-------------------|----------------|
| ROM Image Files | RCZ180_ext.rom |
| | RCZ180_nat.rom |
| Console Baud Rate | 115200 |
- Assumes CPU oscillator of 10.000 MHz
- Console on primary SIO serial port at 115200 baud
- Includes support for on-board SIO
- Auto support for RC2014 Compact Flash Module
- Auto support for RC2014 PPIDE Module
- Auto detects WDC floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Support for SMC floppy controllers may be enabled in config
- Support for PropIO V2 may be enabled in config (PRPENABLE). If
enabled, will auto-detect and install associated
video, keyboard and SD Card support if present.
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 18.432 MHz assumed
- Hardware auto-detected:
- DS1302 RTC
- Z180 ASCI Serial Ports
- ACIA Serial Interface Module
- SIO Serial Interface Module
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- Serial baud rate is usually determined by hardware for ACIA and
SIO interfaces
- Requires 512K RAM/ROM module
- Specific ROM image determined by memory module used:
- RCZ180_ext - Bank switching on memory module (external of CPU)
- RCZ180_nat - Linear memory module (native CPU bank switching)
#### DYNO (DYNO_std.rom)
`\clearpage`{=latex}
- Assumes CPU oscillator of 18.432 MHz
- Console on Z180 onboard serial ports at 38400 baud
- Includes support for BQ4842 RTC
- Auto detects Dyno floppy disk controller and installs
support for two attached 3.5" floppy disks if found
- Includes support for onboard PPIDE
### RCBus Z280 CPU Module
| | |
|-------------------|----------------|
| ROM Image Files | RCZ280_ext.rom |
| | RCZ280_nat.rom |
| Console Baud Rate | 115200 |
- CPU speed is assumed to be 12 MHz (24 MHz oscillator)
- Hardware auto-detected:
- DS1302 RTC
- Z280 Z2U Serial Ports
- ACIA Serial Interface Module (ext only)
- SIO Serial Interface Module
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- Serial baud rate is usually determined by hardware for ACIA and
SIO interfaces
- Requires 512K RAM/ROM module
- Specific ROM image determined by memory module used:
- RCZ180_ext - Bank switching on memory module (external of CPU)
- RCZ180_nat - Linear memory module (native CPU bank switching)
`\clearpage`{=latex}
`\clearpage`{=latex}
### Easy Z80 SBC
| | |
|-------------------|---------------|
| ROM Image File | EZZ80_std.rom |
| Console Baud Rate | 115200 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 10.000 MHz assumed
- System timer is generated by onboard CTC
- Hardware auto-detected:
- DS1302 RTC
- Onboard SIO Serial Interface
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- SIO Serial baud rate managed by CTC
`\clearpage`{=latex}
### Tiny Z80 EIPC SBC
| | |
|-------------------|----------------|
| ROM Image File | EZZ80_tz80.rom |
| Console Baud Rate | 115200 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 16.000 MHz assumed
- System timer is generated by onboard CTC
- Hardware auto-detected:
- DS1302 RTC
- Onboard SIO Serial Interface
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- SIO Serial baud rate managed by CTC
`\clearpage`{=latex}
### Z80-512K CPU/RAM/ROM Module
| | |
|-------------------|----------------|
| ROM Image File | RCZ80_skz.rom |
| Console Baud Rate | 115200 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 7.3728 MHz assumed
- Hardware auto-detected:
- DS1302 RTC
- ACIA Serial Interface Module
- SIO Serial Interface Module
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- AY-3-8910/YM2149 Sound Module
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- Serial baud rate is determined by hardware for ACIA and SIO
interfaces
`\clearpage`{=latex}
### SC126 Z180 SBC
| | |
|-------------------|----------------|
| ROM Image Files | SCZ180_126.rom |
| Console Baud Rate | 115200 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 18.432 MHz assumed
- Hardware auto-detected:
- DS1302 RTC
- Z180 ASCI Serial Ports
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- AY-3-8910/YM2149 Sound Module
- Onboard SD Card Interface
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
`\clearpage`{=latex}
### SC130 Z180 SBC
| | |
|-------------------|----------------|
| ROM Image Files | SCZ180_130.rom |
| Console Baud Rate | 115200 |
- CPU speed assumed to be 18.432 MHz
- Hardware auto-detected:
- Interrupt-driven RTC
- Z180 ASCI Serial Ports
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- AY-3-8910/YM2149 Sound Module
- Onboard SD Card Interface
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
`\clearpage`{=latex}
### SC131 Z180 Pocket Computer
| | |
|-------------------|----------------|
| ROM Image Files | SCZ180_131.rom |
| Console Baud Rate | 115200 |
- CPU speed assumed to be 18.432 MHz
- Hardware auto-detected:
- Interrupt-driven RTC
- Z180 ASCI Serial Ports
- Onboard SD Card Interface
`\clearpage`{=latex}
### SC140 Z180 CPU Module
| | |
|-------------------|----------------|
| ROM Image Files | SCZ180_140.rom |
| Console Baud Rate | 115200 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 18.432 MHz assumed
- Hardware auto-detected:
- DS1302 RTC
- Z180 ASCI Serial Ports
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- AY-3-8910/YM2149 Sound Module
- Onboard SD Card Interface
- IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
`\clearpage`{=latex}
### Dyno Z180 SBC
| | |
|-------------------|----------------|
| ROM Image Files | DYNO0_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is assumed to be 18.432 MHz
- Hardware auto-detected:
- BQ4845P RTC
- Z180 ASCI Serial Ports
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- Onboard PPIDE Hard Disk Interface Module
`\clearpage`{=latex}
### Nhyodyne Z80 MBC
| | |
|-------------------|---------------|
| ROM Image File | MBC_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 8.000 MHz assumed
- System timer is generated by CTC if available
- Hardware auto-detected:
- DS1302 RTC
- Zilog CTC
- UART Serial Adapter
- PPIDE Hard Disk Interface
- SIO Serial Interface
- CVDU Display Adapter
- TMS9938/58 Display Adapter
- Floppy Disk Controller w/ 3.5" HD Drives
- LPT Printer Interface
- Zilog Parallel Interface
- AY-3-8910/YM2149 Sound Module
- Zilor DMA Module
- PS/2 Keyboard Interface
`\clearpage`{=latex}
### Rhyophyre Z180 SBC
| | |
|-------------------|---------------|
| ROM Image File | RPH_std.rom |
| Console Baud Rate | 38400 |
- CPU speed is detected at startup if DS1302 RTC is active
- System timer is generated by Z180 CPU
- Hardware auto-detected:
- Onboard Z180 ASCI Serial Ports
- Onboard PPIDE CF Interface
- Onboard PS/2 Keyboard Controller
`\clearpage`{=latex}
### Z80 ZRC CPU Module
| | |
|-------------------|--------------------|
| ROM Image Files | RCZ80_zrc.rom |
| Console Baud Rate | 115200 |
- CPU speed is detected at startup if DS1302 RTC is active
- Otherwise 7.3728 MHz assumed
- Hardware auto-detected:
- DS1302 RTC
- Onboard ACIA Serial Interface Module
- SIO Serial Interface Module
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- AY-3-8910/YM2149 Sound Module
- Onboard IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- Serial baud rate is usually determined by hardware for ACIA and
SIO interfaces
`\clearpage`{=latex}
`\clearpage`{=latex}
### Z280 ZZRCC CPU Module
| | |
|-------------------|--------------------|
| ROM Image Files | RCZ280_nat_zzr.rom |
| Console Baud Rate | 115200 |
- CPU speed is assumed to be 12 MHz (24 MHz oscillator)
- Hardware auto-detected:
- DS1302 RTC
- Z280 Z2U Serial Ports
- SIO Serial Interface Module
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- Onboard IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- Serial baud rate is usually determined by hardware for ACIA and
SIO interfaces
`\clearpage`{=latex}
### Z280 ZZ80MB SBC
| | |
|-------------------|-------------------|
| ROM Image Files | RCZ280_nat_zz.rom |
| Console Baud Rate | 115200 |
- CPU speed is assumed to be 12 MHz (24 MHz oscillator)
- Hardware auto-detected:
- DS1302 RTC
- Z280 Z2U Serial Ports
- SIO Serial Interface Module
- EP Dual UART Serial Interface Module
- WDC Floppy Disk Controller w/ 3.5" HD Drives
- Onboard IDE Hard Disk Interface Module
- PPIDE Hard Disk Interface Module
- Serial baud rate is usually determined by hardware for ACIA and
SIO interfaces
`\clearpage`{=latex}
@@ -3337,7 +3654,7 @@ may be discovered by RomWBW in your system.
| **ID** | **Type** | **Description** |
|-----------|----------|--------------------------------------------------------|
| ACIA | Char | MC68B50 Asynchronous Communications Interface Adapter |
| ASCI | Char | Z180 Built-in Serial Ports |
| ASCI | Char | Zilog Z180 CPU Built-in Serial Ports |
| AY | Audio | AY-3-8910/YM2149 Programmable Sound Generator |
| BQRTC | RTC | BQ4845P Real Time Clock |
| CTC | System | Zilog Clock/Timer |
@@ -3379,4 +3696,4 @@ may be discovered by RomWBW in your system.
| VDU | Video | MC6845 Family Video Display Controller |
| VGA | Video | HD6445CP4-based Video Display Controller |
| YM | Audio | YM2612 Programmable Sound Generator |
| Z2U | Char | Zilog Z280 Built-in Serial Ports |
| Z2U | Char | Zilog Z280 CPU Built-in Serial Ports |