CPM3/ZPM3 Cleanup

Source/Images/hd_cpm3/s0/u0/ROMWBW.TXT

@@ -1,3 +1,10 @@
+This is a generic CP/M 3 adaptation for RomWBW.
+
+To start CP/M 3, first boot into CP/M 2.2 or ZSystem.  Then
+switch to the drive that contains the CP/M 3 hard disk image
+and run CPMLDR.  You will be prompted for the disk unit
+of the CP/M 3 image.
+
 With the following exceptions, the files in this directory
 came from the CP/M 3 binary distribution on "The Unofficial
 CP/M Web site" at http://www.cpm.z80.de/binary.html.

Source/Images/hd_zpm3/s0/u0/ROMWBW.TXT

@@ -0,0 +1,51 @@
+This is a generic ZPM3 adaptation for RomWBW.
+
+To start ZPM3, first boot into CP/M 2.2 or ZSystem.  Then
+switch to the drive that contains the ZPM3 hard disk image
+and run CPMLDR.  You will be prompted for the disk unit
+of the ZPM3 image.
+
+You may notice that there is a ZPMLDR application on the
+hard disk image.  This application is equivalent to CPMLDR,
+but it has some issues with the number of drives that
+RomWBW supports.  So, as indicated above, use CPMLDR to
+launch ZPM3.
+
+I have not found a way to make ZPM3 start up with any drive
+other than A: as the system drive.  So, during the load
+process, the boot drive and drive A: are "swapped" so that
+the boot drive is always drive A:.  Use the ASSIGN
+command after starting ZPM3 to see how the drives get
+mapped.
+
+Per ZPM3 standard, files are distributed across different
+user areas depending on their usage.  Normal applications
+are in user 15.  Help files in user 10.  Configuration 
+files in user 14.
+
+In addition to the applications provided in the ZPM3
+distributio, the normal CP/M 3 files are included in user
+area 15.  A few typical ZCPR utility programs are also included
+in user area 15:
+
+ - ALIAS
+ - ARUNZ
+ - ERASE
+ - HELPC (named ZHELP)
+ - LBREXT
+ - SALIAS
+ - SETPATH
+ - VERRROR
+ - VLU
+ - ZCNFG
+ - ERASE (named ZERASE)
+ - ZEX
+ - ZFILER
+ - ZP
+ - SHOW (named ZSHOW)
+ - ZXD
+
+It is a bit confusing, but the ZPM3 system file is called CPM3.SYS.
+This is the ZPM3 default configuration and I guess it is done this
+way to maximize compatibility with CP/M 3.  You will notice that
+the startup banner will indicate ZPM3.

Source/Images/hd_zpm3/s0/u0/WBW.TXT

@@ -1,20 +0,0 @@
-This an experimental adaptation of ZPM3 for RomWBW.
-
-Launch ZPM3 using CPMLDR.  ZPMLDR is not working reliably
-at this time.
-
-I have not found a way to make ZPM3 start up with any drive
-other than A: as the system drive.  So, during the load
-process, the boot drive and drive A: are "swapped" so that
-the boot drive is always drive A:.  Use the ASSIGN
-command after starting ZPM3 to see how the drives get
-mapped.
-
-Per ZPM3 standard, files are distributed across different
-user areas depending on their usage.  Normal applications
-are in user 15.  Help files in user 10.  Configuration 
-files in user 14.
-
-ZSID6.COM is the original DRI ZSID distribution, but
-patched to use RST 6 instead of RST 7 to avoid conflicting
-with mode 1 interrupts.