MirrorRepos/RomWBW
1
0
Fork 1
mirror of https://github.com/wwarthen/RomWBW.git synced 2026-02-06 22:43:15 -06:00
Code Issues Projects Releases Wiki Activity

Preliminary IMM Driver (Zip Drive)

Browse Source 
Thanks to Alan Cox for inspiring this.  Much of the code was usurped from Fuzix.
This commit is contained in:
Wayne Warthen
2023-05-23 18:35:18 -07:00
parent 6e316b46f0
commit 63cb89dcfc
43 changed files with 3134 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
Source/Apps/assign.asm
View File

@@ -1918,8 +1918,8 @@ dev06 .db "SD",0
dev07 .db "PRPSD",0
dev08 .db "PPPSD",0
dev09 .db "HDSK",0
dev10 .equ devunk
dev11 .equ devunk
dev10 .db "PPA",0
dev11 .db "IMM",0
dev12 .equ devunk
dev13 .equ devunk
dev14 .equ devunk

4
Source/CBIOS/cbios.asm
View File

@@ -3392,8 +3392,8 @@ DEV06 .DB "SD$"
DEV07 .DB "PRPSD$"
DEV08 .DB "PPPSD$"
DEV09 .DB "HDSK$"
DEV10 .EQU DEVUNK
DEV11 .EQU DEVUNK
DEV10 .DB "PPA$"
DEV11 .DB "IMM$"
DEV12 .EQU DEVUNK
DEV13 .EQU DEVUNK
DEV14 .EQU DEVUNK

22
Source/Doc/Applications.md
View File

@@ -889,6 +889,28 @@ written in C and requires SDCC to compile. As such it is not part of
the RomWBW build process. However, the full project and source code is
found in the [FAT GitHub Repository](https://github.com/wwarthen/FAT).
## Known Issues
CP/M (and workalike) OSes have significant restrictions on filename
characters. The FAT application will block any attempt to create a
file on the CP/M filesystem containing any of these prohibited
characters:
| `< > . , ; : = ? * [ ] _ % | ( ) / \`
The operation will be aborted with "`Error: Invalid Path Name`" if such
a filename character is encountered.
Since MS-DOS does allow some of these characters, you can have
issues when copying files from MS-DOS to CP/M if the MS-DOS filenames
use these characters. Unfortunately, FAT is not yet smart enough to
substitute illegal characters with legal ones. So, you will need to
clean the filenames before trying to copy them to CP/M.
The FAT application does try to detect the scenario where you are
copying a file to itself. However, this detection is not perfect and
can corrupt a file if it occurs. Be careful to avoid this.
`\clearpage`{=latex}
# TUNE

3
Source/Doc/UserGuide.md
View File

@@ -3896,7 +3896,8 @@ may be discovered by RomWBW in your system.
| DSKY | System | Keypad & Display |
| DSRTC | RTC | Maxim DS1302 Real-Time Clock w/ NVRAM |
| DUART | Char | SCC2681 or compatible Dual UART |
| FD | Disk | 8272 of compatible Floppy Disk Controller |
| EMM | Disk | Disk drive on Parallel Port emm interface (Zip Drive) |
| FD | Disk | 8272 or compatible Floppy Disk Controller |
| GDC | Video | uPD7220 Video Display Controller |
| HDSK | Disk | SIMH Simulator Hard Disk |
| IDE | Disk | IDE/ATA Hard Disk Interface |

BIN
Source/Doc/Z180 ASCI Baud Rate Options.xlsx
View File

Binary file not shown.

1
Source/HBIOS/Config/RCZ80_easy.asm
View File

@@ -75,5 +75,6 @@ IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

1
Source/HBIOS/Config/RCZ80_kio.asm
View File

@@ -72,5 +72,6 @@ IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

1
Source/HBIOS/Config/RCZ80_skz.asm
View File

@@ -67,5 +67,6 @@ IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

1
Source/HBIOS/Config/RCZ80_std.asm
View File

@@ -61,5 +61,6 @@ PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDMODE .SET SDMODE_PIO ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|PIO|USR]
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

1
Source/HBIOS/Config/RCZ80_tiny.asm
View File

@@ -82,5 +82,6 @@ IDE0BASE .SET $90 ; IDE 0: IO BASE ADDRESS
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

1
Source/HBIOS/Config/RCZ80_zrc.asm
View File

@@ -59,5 +59,6 @@ IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

1
Source/HBIOS/Config/RCZ80_zrc_ram.asm
View File

@@ -63,5 +63,6 @@ IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

4
Source/HBIOS/cfg_dyno.asm
View File

@@ -252,6 +252,10 @@ PIO1BASE .EQU $BC ; PIO 1: REGISTERS BASE ADR
;
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

16
Source/HBIOS/cfg_master.asm
View File

@@ -317,6 +317,22 @@ LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $E8 ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $EC ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
PPACNT .EQU 1 ; PPA: NUMBER OF PPA DEVICES (1-2)
PPATRACE .EQU 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
PPA0MODE .EQU PPAMODE_MG014 ; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA0BASE .EQU LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
PPA1MODE .EQU PPAMODE_MG014 ; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA1BASE .EQU LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
IMMCNT .EQU 1 ; IMM: NUMBER OF IMM DEVICES (1-2)
IMMTRACE .EQU 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
IMM0MODE .EQU IMMMODE_MG014 ; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM0BASE .EQU LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
IMM1MODE .EQU IMMMODE_MG014 ; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM1BASE .EQU LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO4BASE .EQU $90 ; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

16
Source/HBIOS/cfg_mbc.asm
View File

@@ -241,6 +241,22 @@ LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $E8 ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $EC ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
PPACNT .EQU 1 ; PPA: NUMBER OF PPA DEVICES (1-2)
PPATRACE .EQU 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
PPA0MODE .EQU PPAMODE_MG014 ; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA0BASE .EQU LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
PPA1MODE .EQU PPAMODE_MG014 ; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA1BASE .EQU LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
IMMCNT .EQU 1 ; IMM: NUMBER OF IMM DEVICES (1-2)
IMMTRACE .EQU 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
IMM0MODE .EQU IMMMODE_MG014 ; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM0BASE .EQU LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
IMM1MODE .EQU IMMMODE_MG014 ; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM1BASE .EQU LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO4BASE .EQU $90 ; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

4
Source/HBIOS/cfg_mk4.asm
View File

@@ -254,6 +254,10 @@ LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $E8 ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $EC ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO4BASE .EQU $90 ; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

4
Source/HBIOS/cfg_n8.asm
View File

@@ -247,6 +247,10 @@ PIO1BASE .EQU $BC ; PIO 1: REGISTERS BASE ADR
;
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO4BASE .EQU $90 ; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

16
Source/HBIOS/cfg_rcz180.asm
View File

@@ -263,6 +263,22 @@ LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $18 ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $00 ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
PPACNT .EQU 1 ; PPA: NUMBER OF PPA DEVICES (1-2)
PPATRACE .EQU 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
PPA0MODE .EQU PPAMODE_MG014 ; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA0BASE .EQU LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
PPA1MODE .EQU PPAMODE_MG014 ; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA1BASE .EQU LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
IMMCNT .EQU 1 ; IMM: NUMBER OF IMM DEVICES (1-2)
IMMTRACE .EQU 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
IMM0MODE .EQU IMMMODE_MG014 ; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM0BASE .EQU LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
IMM1MODE .EQU IMMMODE_MG014 ; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM1BASE .EQU LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

16
Source/HBIOS/cfg_rcz280.asm
View File

@@ -267,6 +267,22 @@ LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $18 ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $00 ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
PPACNT .EQU 1 ; PPA: NUMBER OF PPA DEVICES (1-2)
PPATRACE .EQU 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
PPA0MODE .EQU PPAMODE_MG014 ; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA0BASE .EQU LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
PPA1MODE .EQU PPAMODE_MG014 ; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA1BASE .EQU LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
IMMCNT .EQU 1 ; IMM: NUMBER OF IMM DEVICES (1-2)
IMMTRACE .EQU 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
IMM0MODE .EQU IMMMODE_MG014 ; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM0BASE .EQU LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
IMM1MODE .EQU IMMMODE_MG014 ; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM1BASE .EQU LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

18
Source/HBIOS/cfg_rcz80.asm
View File

@@ -258,9 +258,25 @@ LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
LPTMODE .EQU LPTMODE_MG014 ; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
LPTCNT .EQU 1 ; LPT: NUMBER OF CHIPS TO DETECT (1-2)
LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $18 ; LPT 0: REGISTERS BASE ADR
LPT0BASE .EQU $0C ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $00 ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
PPACNT .EQU 1 ; PPA: NUMBER OF PPA DEVICES (1-2)
PPATRACE .EQU 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
PPA0MODE .EQU PPAMODE_MG014 ; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA0BASE .EQU LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
PPA1MODE .EQU PPAMODE_MG014 ; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA1BASE .EQU LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
IMMCNT .EQU 1 ; IMM: NUMBER OF IMM DEVICES (1-2)
IMMTRACE .EQU 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
IMM0MODE .EQU IMMMODE_MG014 ; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM0BASE .EQU LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
IMM1MODE .EQU IMMMODE_MG014 ; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM1BASE .EQU LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

4
Source/HBIOS/cfg_rph.asm
View File

@@ -236,6 +236,10 @@ PIO1BASE .EQU $BC ; PIO 1: REGISTERS BASE ADR
;
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO4BASE .EQU $90 ; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)

9
Source/HBIOS/cfg_sbc.asm
View File

@@ -234,11 +234,10 @@ PIO0BASE .EQU $B8 ; PIO 0: REGISTERS BASE ADR
PIO1BASE .EQU $BC ; PIO 1: REGISTERS BASE ADR
;
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
LPTMODE .EQU LPTMODE_NONE ; LPT: DRIVER MODE: LPTMODE_[NONE|IBM|MG014]
LPTCNT .EQU 1 ; LPT: NUMBER OF CHIPS TO DETECT (1-2)
LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $E8 ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $EC ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO4BASE .EQU $90 ; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD

16
Source/HBIOS/cfg_scz180.asm
View File

@@ -257,6 +257,22 @@ LPTTRACE .EQU 1 ; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
LPT0BASE .EQU $18 ; LPT 0: REGISTERS BASE ADR
LPT1BASE .EQU $00 ; LPT 1: REGISTERS BASE ADR
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
PPACNT .EQU 1 ; PPA: NUMBER OF PPA DEVICES (1-2)
PPATRACE .EQU 1 ; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
PPA0MODE .EQU PPAMODE_MG014 ; PPA 0: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA0BASE .EQU LPT0BASE ; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
PPA1MODE .EQU PPAMODE_MG014 ; PPA 1: DRIVER MODE: PPAMODE_[NONE|MG014]
PPA1BASE .EQU LPT1BASE ; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
IMMCNT .EQU 1 ; IMM: NUMBER OF IMM DEVICES (1-2)
IMMTRACE .EQU 1 ; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
IMM0MODE .EQU IMMMODE_MG014 ; IMM 0: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM0BASE .EQU LPT0BASE ; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
IMM1MODE .EQU IMMMODE_MG014 ; IMM 1: DRIVER MODE: IMMMODE_[NONE|MG014]
IMM1BASE .EQU LPT1BASE ; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

4
Source/HBIOS/cfg_z80retro.asm
View File

@@ -206,6 +206,10 @@ PIOENABLE .EQU FALSE ; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
;
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

4
Source/HBIOS/cfg_zeta.asm
View File

@@ -177,6 +177,10 @@ PIOENABLE .EQU FALSE ; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
;
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

4
Source/HBIOS/cfg_zeta2.asm
View File

@@ -188,6 +188,10 @@ PIOENABLE .EQU FALSE ; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
;
LPTENABLE .EQU FALSE ; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
;
PPAENABLE .EQU FALSE ; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
;
IMMENABLE .EQU FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
;
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
PIO_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

34
Source/HBIOS/hbios.asm
View File

@@ -1261,11 +1261,11 @@ Z280_INITZ:
; SET DEFAULT CPU CLOCK MULTIPLIERS (XTAL / 2)
;
; IT HAS BEEN REPORTED THAT CMR NEEDS TO BE SET PRIOR TO CCR
; WHEN USING AN INPUT FREQUENCY THAT IS XTAL / 2.
; I NEVER EXPERIENCED A PROBLEM RELATED TO ORDER, BUT JUST
; BILL MCMULLEN REPORTED THAT CMR NEEDS TO BE SET PRIOR TO CCR
; WHEN USING A CPU FREQUENCY (PHI) THAT IS XTAL * 2.
; HERE WE ARE SETTING CPU FREQUENCY TO XTAL / 2, BUT JUST
; FOR GOOD MEASURE, CMR IS SET PRIOR TO CCR BELOW.
; https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=316&#msg_5045
; https://www.retrobrewcomputers.org/forum/index.php?t=msg&th=316&goto=5045&#msg_5045
XOR A
OUT0 (Z180_CMR),A
OUT0 (Z180_CCR),A
@@ -3239,6 +3239,12 @@ HB_INITTBL:
#IF (HDSKENABLE)
.DW HDSK_INIT
#ENDIF
#IF (PPAENABLE)
.DW PPA_INIT
#ENDIF
#IF (IMMENABLE)
.DW IMM_INIT
#ENDIF
#IF (PRPENABLE)
.DW PRP_INIT
#ENDIF
@@ -6348,6 +6354,24 @@ SIZ_HDSK .EQU $ - ORG_HDSK
.ECHO " bytes.\n"
#ENDIF
;
#IF (PPAENABLE)
ORG_PPA .EQU $
#INCLUDE "ppa.asm"
SIZ_PPA .EQU $ - ORG_PPA
.ECHO "PPA occupies "
.ECHO SIZ_PPA
.ECHO " bytes.\n"
#ENDIF
;
#IF (IMMENABLE)
ORG_IMM .EQU $
#INCLUDE "imm.asm"
SIZ_IMM .EQU $ - ORG_IMM
.ECHO "IMM occupies "
.ECHO SIZ_IMM
.ECHO " bytes.\n"
#ENDIF
;
#IF (TERMENABLE)
ORG_TERM .EQU $
#INCLUDE "term.asm"
@@ -7134,6 +7158,8 @@ PS_DDSD .TEXT "SD$"
PS_DDPRPSD .TEXT "PRPSD$"
PS_DDPPPSD .TEXT "PPPSD$"
PS_DDHDSK .TEXT "HDSK$"
PS_DDPPA .TEXT "PPA$"
PS_DDIMM .TEXT "IMM$"
;
; DISK TYPE STRINGS
;

2
Source/HBIOS/hbios.inc
View File

@@ -321,6 +321,8 @@ DIODEV_SD .EQU $60
DIODEV_PRPSD .EQU $70
DIODEV_PPPSD .EQU $80
DIODEV_HDSK .EQU $90
DIODEV_PPA .EQU $A0
DIODEV_IMM .EQU $B0
;
; RTC DEVICE IDS
;

1469
Source/HBIOS/imm.asm Normal file
View File

File diff suppressed because it is too large Load Diff

1454
Source/HBIOS/ppa.asm Normal file
View File

File diff suppressed because it is too large Load Diff

10
Source/HBIOS/std.asm
View File

@@ -248,6 +248,16 @@ LPTMODE_NONE .EQU 0 ; NONE
LPTMODE_IBM .EQU 1 ; IBM STYLE INTERFACE
LPTMODE_MG014 .EQU 2 ; RCBUS MG014 STYLE INTERFACE
;
; PPA DRIVER MODE SELECTIONS
;
PPAMODE_NONE .EQU 0 ; NONE
PPAMODE_MG014 .EQU 1 ; RCBUS MG014 STYLE INTERFACE
;
; IMM DRIVER MODE SELECTIONS
;
IMMMODE_NONE .EQU 0 ; NONE
IMMMODE_MG014 .EQU 1 ; RCBUS MG014 STYLE INTERFACE
;
; GDC MONITOR SELECTIONS
;
GDCMON_NONE .EQU 0

2
Source/ver.inc
View File

@@ -2,7 +2,7 @@
#DEFINE RMN 3
#DEFINE RUP 0
#DEFINE RTP 0
#DEFINE BIOSVER "3.3.0-dev.14"
#DEFINE BIOSVER "3.3.0-dev.15"
#define rmj RMJ
#define rmn RMN
#define rup RUP

2
Source/ver.lib
View File

@@ -3,5 +3,5 @@ rmn equ 3
rup equ 0
rtp equ 0
biosver macro
db "3.3.0-dev.14"
db "3.3.0-dev.15"
endm