Update ay38910.asm

Source/HBIOS/ay38910.asm

@@ -4,8 +4,10 @@
 ;
 ;======================================================================
 ;
-#include "cfg_state.inc"
-;
+
+;#include "cfg_state.inc"
+
+
 AY_RCSND	.EQU	0		; 0 = EB MODULE, 1=MF MODULE
 ;
 #IF (AYMODE == AYMODE_SCG)
@@ -13,7 +15,6 @@ AY_RSEL		.EQU	$9A
 AY_RDAT		.EQU	$9B
 AY_RIN		.EQU	AY_RSEL
 AY_ACR		.EQU	$9C
-AY_CLK		.SET	3579545 	; MSX NTSC COLOUR BURST FREQ = 315/88
 #ENDIF
 ;
 #IF (AYMODE == AYMODE_N8)
@@ -72,13 +73,10 @@ SBCV2004	.EQU	0		; USE SBC-V2-004 HALF CLOCK DIVIDER
 AY_TONECNT	.EQU	3		; COUNT NUMBER OF TONE CHANNELS
 AY_NOISECNT	.EQU	1		; COUNT NUMBER OF NOISE CHANNELS
 ;
-#IF (AY_CLK > 3579545)			; DEPENDING ON THE 
-AY_SCALE	.EQU	2		; INPUT CLOCK FREQUENCY
-#ELSE					; PRESCALE THE TONE PERIOD
-AY_SCALE	.EQU	3		; DATA TO MAINTAIN MAXIMUM
-#ENDIF					; RANGE AND ACCURACY
-;
-AY_RATIO	.EQU	(AY_CLK * 100) / (16 >> AY_SCALE)
+AY_PHICLK	.EQU	3579545		; MSX NTSC COLOUR BURST FREQ = 315/88
+;AY_PHICLK	.EQU	3500000		; ZX SPECTRUM 3.5MHZ
+;AY_PHICLK	.EQU	4000000		; RETROBREW SCB-SCG
+AY_RATIO	.EQU	AY_CLK * 100 / 16
 ;
 #INCLUDE "audio.inc"
 ;
@@ -129,50 +127,55 @@ AY_FND:	LD	IY, AY_IDAT		; SETUP FUNCTION TABLE
 	LD	DE,(AY_R3CHBP*256)+$00
 	CALL	AY_WRTPSG		; R03 = $00 = XXXX0000
 ;
-#IF SYSTIMEN
+
+#IF (SYSTIM != TM_NONE)
 	LD	A, TICKFREQ / 3		; SCHEDULE IN 1/3 SECOND TO TURN OFF SOUND
 	LD	(AY_TIMTIK), A
-;
+
 	LD	HL, (VEC_TICK + 1)	; GET CUR TICKS VECTOR
 	LD	(AY_TIMHOOK), HL	; SAVE IT INTERNALLY
 	LD	HL, AY_TIMER		; INSTALL TIMER HOOK HANDLER
 	LD	(VEC_TICK + 1), HL
-;
+
 	LD	A, $02			; NOT READY & IN INTERUPT HANDLER
 	LD	(AY_READY), A
+
 #ELSE
  	CALL	LDELAY			; HALF SECOND DELAY
  	LD	E,$00			; SET VOLUME OFF
 	CALL	AY_SETV			; ON ALL CHANNELS
 	LD	A, $01			; READY & NOT IN INTERUPT HANDLER
 	LD	(AY_READY), A
+
 #ENDIF
 ;
 	XOR	A			; SUCCESSFULL INIT
 	RET
-;
-#IF SYSTIMEN
+
+#IF (SYSTIM != TM_NONE)
+
 AY_TIMER:
 	LD	A, (AY_TIMTIK)
 	DEC	A
 	LD	(AY_TIMTIK), A
 	JR	NZ, AY_TIMER1
-;
+
 	LD	E,$00			; SET VOLUME OFF
 	CALL	AY_SETV			; ON ALL CHANNELS
 	LD	A, $01			; READY & NOT IN INTERUPT HANDLER
 	LD	(AY_READY), A
-;
+
 	LD	DE, AY_TIMER		; MAKE AY_TIMER A NO_OP HANDLER
 	LD	HL, AY_TIMER1
 	LD	BC, 3
 	LDIR
-;
+
 AY_TIMER1:
 	JP	0			; OVERWRITTEN WITH NEXT HANDLER
 AY_TIMHOOK:	.EQU	$ - 2
 
 AY_TIMTIK	.DB	0		; COUNT DOWN TO FINISH BOOT BEEP
+
 #ENDIF
 ;
 ;======================================================================
@@ -182,7 +185,7 @@ AY_TIMTIK	.DB	0		; COUNT DOWN TO FINISH BOOT BEEP
 AY_INIT:
 	LD	DE,(AY_R7ENAB*256)+$F8	; SET MIXER CONTROL / IO ENABLE.  $F8 - 11 111 000
 	JP	AY_WRTPSG		; I/O PORTS = OUTPUT, NOISE CHANNEL C, B, A DISABLE, TONE CHANNEL C, B, A ENABLE
-;
+
 AY_CHKREDY:
 	LD	A, (AY_READY)
 	BIT	0, A
@@ -216,7 +219,7 @@ AY_SV:	CALL	AY_WRTPSG		; CYCLING THROUGH ALL CHANNELS
 AY_RESET:
 	AUDTRACE(AYT_INIT)
 	CALL	AY_CHKREDY		; RETURNS TO OUR CALLER IF NOT READY
-;
+
 	PUSH	DE
 	PUSH	HL
 	CALL	AY_INIT			; SET DEFAULT CHIP CONFIGURATION
@@ -258,34 +261,10 @@ AY_NOTE:
 	AUDTRACE(AYT_NOTE)
 	AUDTRACE_HL
 	AUDTRACE_CR
-;
-;	CALL	PRTHEXWORDHL
-;	CALL	PC_COLON
-;
-	LD	DE, AY3NOTETBL		; ON ENTRY HL IS THE NOTE TO PLAY
-	PUSH	DE			; AND DE IS THE START OF NOTE TABLE
-	LD	DE, 48			; LOAD DE WITH NOTE TABLE SIZE
-	CALL	DIV16			; AND CALCULATE OCTAVE COUNT IN BC
-;			
-	ADD	HL, HL			; HL IS THE REMAINDER FROM ABOVE DIVISION (0-47) AND THE NOTE 
-	POP	DE			; TO PLAY IN THE OCTAVE. ADD IT TO THE START OF THE NOTE TABLE
-	ADD	HL, DE			; TO POINT TO THE PERIOD FOR THE NOTE WE WANT TO PLAY.
-;
-	LD	A, (HL)			; HL POINT TO CURRENT PERIOD COUNT WE WANT TO PLAY
-	INC	HL			; SO LOAD PERIOD COUNT FROM NOTE TABLE INTO HL
-	LD	H, (HL)			; SO WE CAN UPDATE IT FOR THE REQUIRED OCTAVE
-	LD	L, A
-;
-	LD	A,AY_SCALE		; THE NOTE TABLE PERIOD DATA HAS BEEN
-	ADD	A,C			; PRESCALED TO MAINTAIN RANGE SO ALLOW
-	LD	B,A			; FOR THIS WHEN CHANGING OCTAVE
-AY_NOTE1:
-	SRL	H			; ADJUST THE PERIOD DATA
-  	RR	L			; FOR THE DESIRED OCTAVE
-	DJNZ	AY_NOTE1		; FALL THROUGH TO SET PERIOD AND RANGE CHECK
-;
-;	CALL	PRTHEXWORDHL
-;	CALL	NEWLINE
+
+	LD	DE, AY3NOTETBL
+	CALL	AUD_NOTE		; RETURNS PERIOD IN HL, FALL THRU
+					; TO SET THIS PERIOD
 ;
 ;======================================================================
 ;	SOUND DRIVER FUNCTION - PERIOD
@@ -299,7 +278,7 @@ AY_PERIOD:
 	LD	A, H			; IF ZERO - ERROR
 	OR	L
 	JR	Z, AY_PERIOD1
-;
+
 	LD	A, H			; MAXIMUM TONE PERIOD IS 12-BITS
 	AND	11110000B		; ALLOWED RANGE IS 0001-0FFF (4095)
 	JR	NZ, AY_PERIOD1		; RETURN NZ IF NUMBER TOO LARGE
@@ -447,6 +426,7 @@ AY_EI:
 	RET	NZ
 	HB_EI
 	RET
+
 ;
 ;======================================================================
 ;
@@ -480,6 +460,7 @@ AY_WRTPSG:
 	OUT	(112),A			; NORMAL CLOCK SPEED
 #ENDIF
 	JP	AY_EI
+
 ;
 ;======================================================================
 ;
@@ -529,14 +510,13 @@ AYT_REGWR		.DB	"\r\nOUT AY-3-8910 $"
 #ENDIF
 ;
 ;======================================================================
-;	QUARTER TONE FREQUENCY TABLE
+;	BBC MICRO QUARTER TONE FREQUENCY TABLE
 ;======================================================================
 ;
-; THE FREQUENCY BY QUARTER TONE STARTING AT A0# OCTAVE 0
+; THE FREQUENCY BY QUARTER TONE STARTING AT A0# OCATVE 0
 ; USED TO MAP EACH OCTAVE (DIV BY 2 TO JUMP AN OCTAVE UP)
 ; FIRST PLAYABLE NOTE WILL BE 0
 ; ASSUMING A CLOCK OF 1843200 THIS MAPS TO A0#
-;
 AY3NOTETBL:
 	.DW	AY_RATIO / 2913
 	.DW	AY_RATIO / 2956