Merge pull request #205 from wwarthen/dev

Disk Image Reorg

Source/HBIOS/hbios.asm

@@ -2101,8 +2101,11 @@ HB_ROMCK2:
 ;
 ; VERIFY ROM CHECKSUM BANK SPECIFIED IN REG C
 ; THIS MUST BE COPIED TO UPPER RAM TO RUN
+; INTERRUPTS ARE DISABLED SINCE PAGE ZERO VECTOR WILL BE
+; SWAPPED OUT.  ASSUMES THAT INTERRUPTS ARE ENABLED AT ENTRY.
 ;
 HB_CKBNK:
+	HB_DI				; SUPPRESS INTERRUPTS
 	LD	A,(HB_CURBNK)		; GET CURRENT BANK
 	LD	E,A			; SAVE IN E
 	LD	A,C			; BANK TO TEST
@@ -2119,6 +2122,7 @@ HB_CKBNK1:
 	LD	A,E			; BANK TO RESTORE
 	CALL	HBX_BNKSEL		; RESTORE ORIG BANK
 	POP	AF			; RECOVER RESULT
+	HB_EI				; ALLOW INTERRUPTS AGAIN
 	RET				; AND DONE
 ;
 HB_CKBNKSIZ	.EQU	$-HB_CKBNK	; SIZE OF ROUTINE

Source/Images/BuildDisk.ps1

@@ -71,6 +71,7 @@ for ($Usr=0; $Usr -lt 16; $Usr++)
 		$Cmd = "cpmcp -f $Format $ImgFile d_${Disk}/u${Usr}/*.* ${Usr}:"
 		$Cmd
 		Invoke-Expression $Cmd
+		if ($LASTEXITCODE -gt 0) {throw "Command returned exit code $LASTEXITCODE"}
 	}
 }
 
@@ -84,6 +85,7 @@ if (Test-Path("d_${Disk}.txt"))
 			$Cmd = "cpmcp -f $Format $ImgFile ${Spec}"
 			$Cmd
 			Invoke-Expression $Cmd
+			if ($LASTEXITCODE -gt 0) {throw "Command returned exit code $LASTEXITCODE"}
 		}
 	}
 }

Source/Images/d_bp.txt

@@ -1,13 +1,4 @@
 #
-# Add RomWBW utilities
-#
-../../Binary/Apps/*.com 15:
-#
-# Add Tune sample files
-#
-../../Binary/Apps/Tunes/*.pt? 3:
-../../Binary/Apps/Tunes/*.mym 3:
-#
 # Add ZSystem images
 #
 ../BPBIOS/*.img 0:
@@ -18,6 +9,46 @@
 ../BPBIOS/Z34RCP11/z34rcp11.rel 0:rcp.zrl
 ../BPBIOS/NZFCP13/nzfcp13.rel 0:fcp.zrl
 #
+# Add RomWBW utilities
+#
+#../../Binary/Apps/*.com 15:
+../../Binary/Apps/assign.com 15:
+../../Binary/Apps/fat.com 15:
+../../Binary/Apps/fdu.com 15:
+../../Binary/Apps/format.com 15:
+../../Binary/Apps/inttest.com 15:
+../../Binary/Apps/mode.com 15:
+../../Binary/Apps/rtc.com 15:
+../../Binary/Apps/survey.com 15:
+../../Binary/Apps/syscopy.com 15:
+../../Binary/Apps/sysgen.com 15:
+../../Binary/Apps/talk.com 15:
+../../Binary/Apps/timer.com 15:
+../../Binary/Apps/tune.com 15:
+../../Binary/Apps/xm.com 15:
+#
+../../Binary/Apps/i2clcd.com 2:
+../../Binary/Apps/i2cscan.com 2:
+../../Binary/Apps/rtcds7.com 2:
+../../Binary/Apps/rtchb.com 2:
+../../Binary/Apps/ppidetst.com 2:
+../../Binary/Apps/ramtest.com 2:
+../../Binary/Apps/tstdskng.com 2:
+#
+# Add Tune sample files
+#
+../../Binary/Apps/Tunes/*.pt? 3:
+../../Binary/Apps/Tunes/*.mym 3:
+#
+# Add CPNET client files
+#
+cpnet12/*.* 4:
+#
 # Add Common Applications
 #
-Common/*.* 0:
+Common/*.* 15:
+supp/cpm22/*.* 0:
+supp/z3/u10/*.* 10:
+supp/z3/u14/*.* 14:
+supp/z3/u15/*.* 15:
+

Source/Images/d_cpm22.txt

@@ -1,13 +1,39 @@
 #
 # Add RomWBW utilities
 #
-../../Binary/Apps/*.com 0:
+#../../Binary/Apps/*.com 0:
+../../Binary/Apps/assign.com 0:
+../../Binary/Apps/fat.com 0:
+../../Binary/Apps/fdu.com 0:
+../../Binary/Apps/format.com 0:
+../../Binary/Apps/inttest.com 0:
+../../Binary/Apps/mode.com 0:
+../../Binary/Apps/rtc.com 0:
+../../Binary/Apps/survey.com 0:
+../../Binary/Apps/syscopy.com 0:
+../../Binary/Apps/sysgen.com 0:
+../../Binary/Apps/talk.com 0:
+../../Binary/Apps/timer.com 0:
+../../Binary/Apps/tune.com 0:
+../../Binary/Apps/xm.com 0:
+#
+../../Binary/Apps/i2clcd.com 2:
+../../Binary/Apps/i2cscan.com 2:
+../../Binary/Apps/rtcds7.com 2:
+../../Binary/Apps/rtchb.com 2:
+../../Binary/Apps/ppidetst.com 2:
+../../Binary/Apps/ramtest.com 2:
+../../Binary/Apps/tstdskng.com 2:
 #
 # Add Tune sample files
 #
 ../../Binary/Apps/Tunes/*.pt? 3:
 ../../Binary/Apps/Tunes/*.mym 3:
 #
+# Add CPNET client files
+#
+cpnet12/*.* 4:
+#
 # Add OS image
 #
 ../CPM22/cpm_wbw.sys 0:cpm.sys
@@ -15,3 +41,4 @@
 # Add Common Applications
 #
 Common/*.* 0:
+supp/cpm22/*.* 0:

Source/Images/d_cpm22/u0/DDTZ.DOC

@@ -1,564 +0,0 @@
-
-                           DDTZ v2.7
-                       by C.B. Falconer
-                  edited by George A. Havach
-
-Introduction:
-============
-DDTZ v2.7 is a complete replacement for DDT,  Digital  Research's 
-famous Dynamic Debugging Tool,  with improved functionality,  bug 
-extermination,  and full Z80 support.  In general,  DDTZ is fully 
-compatible  with  the  original utility,  but it  has  extra  and 
-extended  commands  and  many  fewer  quirks.   All  Z80-specific 
-instructions can be (dis)assembled,  though in Intel rather  then 
-Zilog format. Furthermore, DDTZ will correctly trace ('T' and 'U' 
-commands) both 8080 and Z80 instructions,  depending on which CPU 
-is operating.  On startup,  the program announces which CPU it is 
-running on.
-
-DDTZ v2.7 now handles the 64180 added opcodes.  It does NOT  test 
-for  a  64180 CPU,  since this cannot be done  without  executing 
-illegal   Z80  instructions,   which  in  turn  will  crash  some 
-simulators.  However v2.7 does not execute any 64180 instructions 
-internally, only in the subject program.
-
-This  issue supplies the "M" version assembled,  to avoid  errors 
-when switching between MSDOS and CPM systems.   The command table 
-is updated accordingly.  Most CPM users are also MSDOS users, but 
-not vice-versa.
-
-The program is invoked by typing
-
-      ddtz<ret>
-or
-      ddtz [d:]filespec<ret>
-
-In  the  second  form,  DDTZ will load the  specified  file  into  
-memory starting at 0100H,  unless it's a .HEX file that sets  its 
-own  load  address.  Besides reporting the NEXT free address  and  
-the PC (program counter) after a successful load, DDTZ also shows 
-the number of memory pages needed for a SAVE.  Instead of  having 
-to write all this down,  just use the 'X' command at any time  to 
-redisplay these three values for the current application.
-
-NOTE:  loading  more  code above the NEXT pointer  revises  these 
-       values.
-
-As  in DDT,  when a program is loaded above the area holding  the 
-'A'  and  'U'  (and now 'W') command  code,  these  commands  are 
-disabled,  and the extra memory  is released to the user.   Thus,  
-DDTZ can occupy  as little as 3K total memory space.  Unlike DDT,  
-however,  DDTZ will not overwrite itself or the system on program 
-loads (except .HEX files).
-
-At initialization,  the stack pointer (SP) points to a return  to 
-DDTZ,  just like for the CCP. Thus, programs that normally return 
-to   the  CCP  will  be  returned  to  DDTZ.    The  'B'  command  
-reinitializes this condition.
-
-
-The intercept vector copies  the BDOS version number,   etc.,  so 
-an  object program  does not know that  DDTZ is running   (except 
-for BIOS-BDOS vector size). Thus, programs that check the version 
-number should execute correctly under DDTZ.
-
-All input parameters can now be entered in any of three formats:
-
-       (1) hexadecimal (as in DDT),
-       (2) decimal, by adding a leading '#' character,
-       (3) ASCII, by enclosing between either single or double
-           quotes; either one or two characters are allowed.
-
-Leading  blanks  in  command lines and parameters  are  absorbed. 
-Either  a  comma  or a (single) space   is   a  valid  delimiter.   
-Either uppercase or lowercase input is accepted.
-
-The  default command  (for anything  not otherwise  recognizable)  
-is 'H'.  This allows convenient calculation, along with the other 
-features described below.   So,  to convert a number,  just enter 
-it!
-
-As  in  DDT,   the prompt character is '-',  and the  only  error 
-message  is  the query ('?'),  which generally kicks you back  to 
-command mode. 
-
-New Commands (Over DDT):
-=======================
-
-NOTE: letters in parenthesis,  e.g.  "(U)",  show the  equivalent 
-      command for DDTZM version (compatible with MSDOS debug).
-
-   @  Sets  or  shows (with no parameter)  the internally  stored 
-      "base" value.   Also used with the 'S' and 'D' commands  as 
-      an optional parameter  (though without the '@')  to display 
-      memory  from an arbitrary base marker (offset). When set to 
-      zero (the default), it does not affect any screen displays.
-
-   B  B)egin: resets the USER stack pointer to its initial value, 
-      such  that any program that exits by an RET will return  to 
-      DDTZ.   DDTZ   provides    a  default   stack   space    of 
-      approximately 24 bytes for user programs.
-
-   C  C)ompare first_address,last_address,against_address:  shows 
-      all  the byte differences between two memory areas,  in the 
-      format
-
-       XXXX aa YYYY bb
-
-      where  XXXX and YYYY  are the comparative memory addresses, 
-      and aa  and  bb  are the corresponding byte values.  Can be 
-      used  to  verify   the identity  of  two  files   by  first 
-      loading  them   into  different memory areas with  the  'R' 
-      command (see below).
-
-
-   W  Write:   stores the modified memory area to disk under  the 
-  (K) filename  specified  by the 'I'  command,  overwriting  the 
-      original file from which it was loaded (the user is queried 
-      before  doing  so).  By default,  the image of memory  from 
-      0100H through the "NEXT" value -1 is saved.  "K first_addr, 
-      last_address"  overrides this and allows writing ANY memory 
-      area to a file. Almost a necessity for CPM 3.0 (no SAVE!).
-      K)eep on DDTZ
-
-   X  eXamine:  redisplays the "NEXT PC SAVE" report at any time.
-  (Q) Q)uery size on DDTZ.
-
-   S  S)earch  first_address,   last_addr,  value:  searches  the 
-  (W) specified memory area for the value (a 16-bit word,  not  a 
-      byte) and shows the locations of all such.  Very useful for 
-      finding  CALL's  or JMP's to a particular address, etc.
-      W)here on DDTZ
-
-   Y  Y)our_option  parm1,parm2,address:  executes  an  arbitrary 
-      routine  at  the  specified address,   with the BC  and  DE 
-      registers  set to parm1 and parm2, respectively.
-
-   Z  Displays (but does not alter) the Z80's alternate  register 
-      set,  including the index registers (disabled if running on 
-      an  8080).  On Z80's,   automatically included  as the last 
-      part of the display by the 'X' command.
-
-
-Based (Offset) Displays:
-=======================
- 
-The  'D' and 'E' commands  can use a stored base value  (offset),  
-as  set  by   the  '@' command.   The current  @  value   may  be 
-overridden for a single execution of these commands by adding the 
-base as an extra parameter  in the command line.   The effect  is  
-to  add  this  value   to  the  first/last  address  and  display 
-accordingly.  The address listing on the left becomes  XXXX:YYYY,  
-where  XXXX  is the offset address and YYYY is the actual  memory 
-address being displayed.   For example,  if you have a data  area  
-located at  42B7H  and wish to  preserve easy access,  just enter 
-"@42b7".  Now, "d0,3f" will dump memory starting at 4237H.
-
-
-Further Changes from DDT:
-========================
-
-   A  A)ssemble  now  accepts   the  full Z80  as  well  as  8080 
-      instruction  set,  although it expects them in Intel rather 
-      than  Zilog  format  (see  notes  below   under   the   'L' 
-      command).    When in doubt, see the mnemnonic list below.
-
-   D  D)isplay or D)ump  will accept  an optional third parameter  
-      to  set the base value for a single execution only.  Format 
-      has been cleaned up.
-
-   H  H)ex_arithmetic    on   two  values   also   shows    their 
-      difference  in decimal.  With only one value,  converts  to 
-      hexadecimal, decimal, and ASCII (low-order byte only).
-
-
-   N  N)ame  now allows drive specification  (d:...)  and sets up 
-  (I) the  complete  command  line,   including  both  FCB's  (at 
-      addresses 005CH and 006CH).   The tail (stored at 0081H up) 
-      is NOT upshifted.
-      I)nput on DDTZ
-
-   U  U)nassemble now displays the raw hexcode,  especially handy 
-  (L) when examining non-code areas. Intel (8080 style) mnemonics 
-      are  used,  so  some  disassembled  instructions  may  look 
-      strange.  E.g., the Z80's 'IN B,(C)' and 'OUT (C),B' become  
-      'INP B' and 'OUTP B', respectively;  'LD (nnnn),BC' becomes 
-      'SBCD nnnn',  'ADD IX,  BC' becomes 'DADX B', and 'JP (IX)' 
-      becomes 'PCIX'. 
-      L)ist on DDTZ
-
-   L  L)oad   now  permits  loading a file into memory   with  an 
-  (R) offset,  which  is  added to the default  load  address  of 
-      0100H.   When reading in  a .HEX file  with  a preset bias,  
-      the   'R'  command will not transfer control to an  invalid 
-      execution point.  Another execution of the 'R' command will 
-      reread the input file, e.g.:
-
-         n blah<ret>
-         l<ret>
-         ...modify the code and generally mess about...
-         l<ret>
-
-      The original file  is reloaded,  and the modifications  are 
-      removed.
-      R)ead on DDTZ
-
-   E  E)nter,  like  D)isplay,  now  accepts an  optional  second 
-  (S) parameter  to  set the base value for  a  single  execution 
-      only.
-      S)ubstitute or S)et on DDTZ
-
-   T  T)rap/trace   on  termination  now shows  the complete  CPU 
-      state. Traps and traces no longer lock up  when  a user RST 
-      7 instruction is executed.   Tracing of BDOS/BIOS calls  is 
-      heavily trun cated,  avoiding clutter and preventing system 
-      crashes.
-
-NOTE: Most of the UNDOCUMENTED Z80 op-codes are handled.  Others
-      can crash the system.
-
-   R  R)egisters  also shows what two-byte values the HL  and  SP 
-  (X) registers are actually pointing to.  On Z80's, displays the 
-      alternate register set.
-      eX)amine on DDTZ
-
-NOTE: Any  use  of the 'W' or 'L' command  resets the system  DMA 
-      transfer address to the standard default value of 0080H.
-
-
-; This is the output of DDTZ when disassembling OPTYPE.TRY
-NOP                     LDA     06A4            MOV     M,H
-LXI     B,06A4          DCX     SP              MOV     M,L
-STAX    B               INR     A               HLT        
-INX     B               DCR     A               MOV     M,A
-INR     B               MVI     A,20            MOV     A,B
-DCR     B               CMC                     MOV     A,C
-MVI     B,20            MOV     B,B             MOV     A,D
-RLC                     MOV     B,C             MOV     A,E
-EXAF                    MOV     B,D             MOV     A,H
-DAD     B               MOV     B,E             MOV     A,L
-LDAX    B               MOV     B,H             MOV     A,M
-DCX     B               MOV     B,L             MOV     A,A
-INR     C               MOV     B,M             ADD     B  
-DCR     C               MOV     B,A             ADD     C  
-MVI     C,20            MOV     C,B             ADD     D  
-RRC                     MOV     C,C             ADD     E  
-DJNZ    0134            MOV     C,D             ADD     H  
-LXI     D,06A4          MOV     C,E             ADD     L  
-STAX    D               MOV     C,H             ADD     M  
-INX     D               MOV     C,L             ADD     A  
-INR     D               MOV     C,M             ADC     B  
-DCR     D               MOV     C,A             ADC     C  
-MVI     D,20            MOV     D,B             ADC     D  
-RAL                     MOV     D,C             ADC     E  
-JR      0134            MOV     D,D             ADC     H  
-DAD     D               MOV     D,E             ADC     L  
-LDAX    D               MOV     D,H             ADC     M  
-DCX     D               MOV     D,L             ADC     A  
-INR     E               MOV     D,M             SUB     B  
-DCR     E               MOV     D,A             SUB     C  
-MVI     E,20            MOV     E,B             SUB     D  
-RAR                     MOV     E,C             SUB     E  
-JRNZ    0134            MOV     E,D             SUB     H  
-LXI     H,06A4          MOV     E,E             SUB     L  
-SHLD    06A4            MOV     E,H             SUB     M  
-INX     H               MOV     E,L             SUB     A  
-INR     H               MOV     E,M             SBB     B  
-DCR     H               MOV     E,A             SBB     C  
-MVI     H,20            MOV     H,B             SBB     D  
-DAA                     MOV     H,C             SBB     E  
-JRZ     0134            MOV     H,D             SBB     H  
-DAD     H               MOV     H,E             SBB     L  
-LHLD    06A4            MOV     H,H             SBB     M  
-DCX     H               MOV     H,L             SBB     A  
-INR     L               MOV     H,M             ANA     B  
-DCR     L               MOV     H,A             ANA     C  
-MVI     L,20            MOV     L,B             ANA     D  
-CMA                     MOV     L,C             ANA     E  
-JRNC    0134            MOV     L,D             ANA     H  
-LXI     SP,06A4         MOV     L,E             ANA     L  
-STA     06A4            MOV     L,H             ANA     M  
-INX     SP              MOV     L,L             ANA     A  
-INR     M               MOV     L,M             XRA     B  
-DCR     M               MOV     L,A             XRA     C  
-MVI     M,20            MOV     M,B             XRA     D  
-STC                     MOV     M,C             XRA     E  
-JRC     0134            MOV     M,D             XRA     H  
-DAD     SP              MOV     M,E             XRA     L  
-
-
-XRA     M               JPE     06A4            SLAR     M  
-XRA     A               XCHG                    SLAR     A  
-ORA     B               CPE     06A4            SRAR     B  
-ORA     C               XRI     20              SRAR     C  
-ORA     D               RST     5               SRAR     D  
-ORA     E               RP                      SRAR     E  
-ORA     H               POP     PSW             SRAR     H  
-ORA     L               JP      06A4            SRAR     L  
-ORA     M               DI                      SRAR     M  
-ORA     A               CP      06A4            SRAR     A  
-CMP     B               PUSH    PSW             SLLR     B  
-CMP     C               ORI     20              SLLR     C  
-CMP     D               RST     6               SLLR     D  
-CMP     E               RM                      SLLR     E  
-CMP     H               SPHL                    SLLR     H  
-CMP     L               JM      06A4            SLLR     L  
-CMP     M               EI                      SLLR     M  
-CMP     A               CM      06A4            SLLR     A  
-RNZ                     CPI     20              SRLR     B  
-POP     B               RST     7               SRLR     C  
-JNZ     06A4            RLCR    B               SRLR     D  
-JMP     06A4            RLCR    C               SRLR     E  
-CNZ     06A4            RLCR    D               SRLR     H  
-PUSH    B               RLCR    E               SRLR     L  
-ADI     20              RLCR    H               SRLR     M  
-RST     0               RLCR    L               SRLR     A  
-RZ                      RLCR    M               BIT     0,B
-RET                     RLCR    A               BIT     0,C
-JZ      06A4            RRCR    B               BIT     0,D
-CZ      06A4            RRCR    C               BIT     0,E
-CALL    06A4            RRCR    D               BIT     0,H
-ACI     20              RRCR    E               BIT     0,L
-RST     1               RRCR    H               BIT     0,M
-RNC                     RRCR    L               BIT     0,A
-POP     D               RRCR    M               BIT     1,B
-JNC     06A4            RRCR    A               BIT     1,C
-OUT     20              RALR    B               BIT     1,D
-CNC     06A4            RALR    C               BIT     1,E
-PUSH    D               RALR    D               BIT     1,H
-SUI     20              RALR    E               BIT     1,L
-RST     2               RALR    H               BIT     1,M
-RC                      RALR    L               BIT     1,A
-EXX                     RALR    M               BIT     2,B
-JC      06A4            RALR    A               BIT     2,C
-IN      20              RARR    B               BIT     2,D
-CC      06A4            RARR    C               BIT     2,E
-SBI     20              RARR    D               BIT     2,H
-RST     3               RARR    E               BIT     2,L
-RPO                     RARR    H               BIT     2,M
-POP     H               RARR    L               BIT     2,A
-JPO     06A4            RARR    M               BIT     3,B
-XTHL                    RARR    A               BIT     3,C
-CPO     06A4            SLAR    B               BIT     3,D
-PUSH    H               SLAR    C               BIT     3,E
-ANI     20              SLAR    D               BIT     3,H
-RST     4               SLAR    E               BIT     3,L
-RPE                     SLAR    H               BIT     3,M
-PCHL                    SLAR    L               BIT     3,A
-
-
-BIT     4,B             RES     3,D             SET     2,H      
-BIT     4,C             RES     3,E             SET     2,L      
-BIT     4,D             RES     3,H             SET     2,M      
-BIT     4,E             RES     3,L             SET     2,A      
-BIT     4,H             RES     3,M             SET     3,B      
-BIT     4,L             RES     3,A             SET     3,C      
-BIT     4,M             RES     4,B             SET     3,D      
-BIT     4,A             RES     4,C             SET     3,E      
-BIT     5,B             RES     4,D             SET     3,H      
-BIT     5,C             RES     4,E             SET     3,L      
-BIT     5,D             RES     4,H             SET     3,M      
-BIT     5,E             RES     4,L             SET     3,A      
-BIT     5,H             RES     4,M             SET     4,B      
-BIT     5,L             RES     4,A             SET     4,C      
-BIT     5,M             RES     5,B             SET     4,D      
-BIT     5,A             RES     5,C             SET     4,E      
-BIT     6,B             RES     5,D             SET     4,H      
-BIT     6,C             RES     5,E             SET     4,L      
-BIT     6,D             RES     5,H             SET     4,M      
-BIT     6,E             RES     5,L             SET     4,A      
-BIT     6,H             RES     5,M             SET     5,B      
-BIT     6,L             RES     5,A             SET     5,C      
-BIT     6,M             RES     6,B             SET     5,D      
-BIT     6,A             RES     6,C             SET     5,E      
-BIT     7,B             RES     6,D             SET     5,H      
-BIT     7,C             RES     6,E             SET     5,L      
-BIT     7,D             RES     6,H             SET     5,M      
-BIT     7,E             RES     6,L             SET     5,A      
-BIT     7,H             RES     6,M             SET     6,B      
-BIT     7,L             RES     6,A             SET     6,C      
-BIT     7,M             RES     7,B             SET     6,D      
-BIT     7,A             RES     7,C             SET     6,E      
-RES     0,B             RES     7,D             SET     6,H      
-RES     0,C             RES     7,E             SET     6,L      
-RES     0,D             RES     7,H             SET     6,M      
-RES     0,E             RES     7,L             SET     6,A      
-RES     0,H             RES     7,M             SET     7,B      
-RES     0,L             RES     7,A             SET     7,C      
-RES     0,M             SET     0,B             SET     7,D      
-RES     0,A             SET     0,C             SET     7,E      
-RES     1,B             SET     0,D             SET     7,H      
-RES     1,C             SET     0,E             SET     7,L      
-RES     1,D             SET     0,H             SET     7,M      
-RES     1,E             SET     0,L             SET     7,A      
-RES     1,H             SET     0,M             DADX    B        
-RES     1,L             SET     0,A             DADX    D        
-RES     1,M             SET     1,B             LXI     X,06A4   
-RES     1,A             SET     1,C             SIXD    06A4     
-RES     2,B             SET     1,D             INX     X        
-RES     2,C             SET     1,E             DADX    X        
-RES     2,D             SET     1,H             LIXD    06A4     
-RES     2,E             SET     1,L             DCX     X        
-RES     2,H             SET     1,M             INR     [X+05]   
-RES     2,L             SET     1,A             DCR     [X+05]   
-RES     2,M             SET     2,B             MVI     [X+05],20
-RES     2,A             SET     2,C             DADX    SP       
-RES     3,B             SET     2,D             MOV     B,[X+05] 
-RES     3,C             SET     2,E             MOV     C,[X+05] 
-
-
-MOV     D,[X+05]        DSBC    B               DADY    B       
-MOV     E,[X+05]        SBCD    06A4            DADY    D       
-MOV     H,[X+05]        NEG                     LXI     Y,06A4  
-MOV     L,[X+05]        RETN                    SIYD    06A4    
-MOV     [X+05],B        IM0                     INX     Y       
-MOV     [X+05],C        LDIA                    DADY    Y       
-MOV     [X+05],D        INP     C               LIYD    06A4    
-MOV     [X+05],E        OUTP    C               DCX     Y       
-MOV     [X+05],H        DADC    B               INR     [Y+05]  
-MOV     [X+05],L        LBCD    06A4            DCR     [Y+05]  
-MOV     [X+05],A        RETI                    MVI     [Y+05],2
-MOV     A,[X+05]        LDRA                    DADY    SP      
-ADD     [X+05]          INP     D               MOV     B,[Y+05]
-ADC     [X+05]          OUTP    D               MOV     C,[Y+05]
-SUB     [X+05]          DSBC    D               MOV     D,[Y+05]
-SBB     [X+05]          SDED    06A4            MOV     E,[Y+05]
-ANA     [X+05]          IM1                     MOV     H,[Y+05]
-XRA     [X+05]          LDAI                    MOV     L,[Y+05]
-ORA     [X+05]          INP     E               MOV     [Y+05],B
-CMP     [X+05]          OUTP    E               MOV     [Y+05],C
-POP     X               DADC    D               MOV     [Y+05],D
-XTIX                    LDED    06A4            MOV     [Y+05],E
-PUSH    X               IM2                     MOV     [Y+05],H
-PCIX                    LDAR                    MOV     [Y+05],L
-SPIX                    INP     H               MOV     [Y+05],A
-RLCR    [X+05]          OUTP    H               MOV     A,[Y+05]
-RRCR    [X+05]          DSBC    H               ADD     [Y+05]  
-RALR    [X+05]          shld    06A4            ADC     [Y+05]  
-RARR    [X+05]          RRD                     SUB     [Y+05]  
-SLAR    [X+05]          INP     L               SBB     [Y+05]  
-SRAR    [X+05]          OUTP    L               ANA     [Y+05]  
-SRLR    [X+05]          DADC    H               XRA     [Y+05]  
-BIT     0,[X+05]        lhld    06A4            ORA     [Y+05]  
-BIT     1,[X+05]        RLD                     CMP     [Y+05]  
-BIT     2,[X+05]        INP     M               POP     Y       
-BIT     3,[X+05]        OUTP    M               XTIY            
-BIT     4,[X+05]        DSBC    SP              PUSH    Y       
-BIT     5,[X+05]        SSPD    06A4            PCIY            
-BIT     6,[X+05]        INP     A               SPIY            
-BIT     7,[X+05]        OUTP    A               RLCR    [Y+05]  
-RES     0,[X+05]        DADC    SP              RRCR    [Y+05]  
-RES     1,[X+05]        LSPD    06A4            RALR    [Y+05]  
-RES     2,[X+05]        LDI                     RARR    [Y+05]  
-RES     3,[X+05]        CCI                     SLAR    [Y+05]  
-RES     4,[X+05]        INI                     SRAR    [Y+05]  
-RES     5,[X+05]        OTI                     SRLR    [Y+05]  
-RES     6,[X+05]        LDD                     BIT     0,[Y+05]
-RES     7,[X+05]        CCD                     BIT     1,[Y+05]
-SET     0,[X+05]        IND                     BIT     2,[Y+05]
-SET     1,[X+05]        OTD                     BIT     3,[Y+05]
-SET     2,[X+05]        LDIR                    BIT     4,[Y+05]
-SET     3,[X+05]        CCIR                    BIT     5,[Y+05]
-SET     4,[X+05]        INIR                    BIT     6,[Y+05]
-SET     5,[X+05]        OTIR                    BIT     7,[Y+05]
-SET     6,[X+05]        LDDR                    RES     0,[Y+05]
-SET     7,[X+05]        CCDR                    RES     1,[Y+05]
-INP     B               INDR                    RES     2,[Y+05]
-OUTP    B               OTDR                    RES     3,[Y+05]
-
-
-RES     4,[Y+05]        SET     0,[Y+05]        SET     4,[Y+05]
-RES     5,[Y+05]        SET     1,[Y+05]        SET     5,[Y+05]
-RES     6,[Y+05]        SET     2,[Y+05]        SET     6,[Y+05]
-RES     7,[Y+05]        SET     3,[Y+05]        SET     7,[Y+05]
-
-; These are the result of disassembling 64180OPS.TRY
-; These opcodes are available ONLY on the 64180 CPU
-; DDTZ will both assemble and disassemble these.
-IN0     B,20            TST     E               MLT     B 
-OUT0    20,B            IN0     H,20            MLT     D 
-TST     B               OUT0    20,H            TSTI    20
-IN0     C,20            TST     H               MLT     H 
-OUT0    20,C            IN0     L,20            TSIO    20
-TST     C               OUT0    20,L            SLP       
-IN0     D,20            TST     L               MLT     SP
-OUT0    20,D            TST     M               OTIM      
-TST     D               IN0     A,20            OTDM      
-IN0     E,20            OUT0    20,A            OIMR      
-OUT0    20,E            TST     A               ODMR      
-
-; The following are UNDOCUMENTED z80 opcodes from XTDOPS.TRY.
-; DDTZ will disassemble these, but will not assemble them.
-; They use xh/xl (or yh/yl) as separate byte registers.
-; Use these at your own risk.
-INRX    H               ACXR    H               MOVY    H,B  
-DCRX    H               ACXR    L               MOVY    H,C  
-MVIX    H,20            SUXR    H               MOVY    H,D  
-INRX    L               SUXR    L               MOVY    H,E  
-DCRX    L               SBXR    H               MOVY    H,A  
-MVIX    L,20            SBXR    L               MOVY    L,B  
-MOVX    B,H             NDXR    H               MOVY    L,C  
-MOVX    B,L             NDXR    L               MOVY    L,D  
-MOVX    C,H             XRXR    H               MOVY    L,E  
-MOVX    C,L             XRXR    L               MOVY    L,A  
-MOVX    D,H             ORXR    H               MOVY    A,H  
-MOVX    D,L             ORXR    L               MOVY    A,L  
-MOVX    E,H             CPXR    H               ADYR    H    
-MOVX    E,L             CPXR    L               ADYR    L    
-MOVX    H,B             INRY    H               ACYR    H    
-MOVX    H,C             DCRY    H               ACYR    L    
-MOVX    H,D             MVIY    H,20            SUYR    H    
-MOVX    H,E             INRY    L               SUYR    L    
-MOVX    H,A             DCRY    L               SBYR    H    
-MOVX    L,B             MVIY    L,20            SBYR    L    
-MOVX    L,C             MOVY    B,H             NDYR    H    
-MOVX    L,D             MOVY    B,L             NDYR    L    
-MOVX    L,E             MOVY    C,H             XRYR    H    
-MOVX    L,A             MOVY    C,L             XRYR    L    
-MOVX    A,H             MOVY    D,H             ORYR    H    
-MOVX    A,L             MOVY    D,L             ORYR    L    
-ADXR    H               MOVY    E,H             CPYR    H    
-ADXR    L               MOVY    E,L             CPYR    L    
-
-
-Command Summary:
-===============
-
-DDTZM command                                         DDTZ command
-=============                                         ============
-@ (base)
-A)ssemble first_address                                  A
-B)egin {i.e., initialize stack and return}               B
-C)ompare first_address,last_address,against_address      C
-D)ump first_address[,last_address[,base]]                D
-E)nter_in_memory first_address[,base]                    S)ubstitute
-F)ill first_address,last_address,value                   F
-G)o_to [address][,trap1[,trap2]]                         G
-H)ex_arithmetic value1(,value2)                          H
-L)oad_file (offset)                                      R)ead
-M)ove first_address,last_address,destination             M
-N)nput FCBs_command_line                                 I)nput
-Q)uit                                                    (not avail)
-R)egister examine/change [register|flag]                 X)amine
-S)earch first_address,last_address,word                  W)hereis
-T)race_execution [count]                                 T
-        Untrace_execution [count] (i.e. do count instr)  U)ntrace
-U)nassemble_code first_address[,last_address]            L)ist code
-W)rite [first_address,last_address]                      K)eep
-X)amine {i.e. display memory parameters for application} Q)uery
-Y)our_option BC:=parm1,DE:=parm2,call_address            Y
-Z)80_register_display                                    Z
-
-
-If you find this program useful, contributions will be gratefully
-accepted and will encourage further development and release of
-useful CPM programs.  My practice is to include source.
-
-C.B. Falconer
-680 Hartford Turnpike,
-Hamden, Conn. 06517           (203) 281-1438
-
-DDTZ and its associated documentation and other files are
-copyright (c) 1980-1988 by C.B. Falconer.  They may be freely
-copied and used for non-commercial purposes ONLY.
-

Source/Images/d_cpm3.txt

@@ -21,13 +21,40 @@
 #
 # Add RomWBW utilities
 #
-../../Binary/Apps/*.com 0:
+#../../Binary/Apps/*.com 0:
+../../Binary/Apps/assign.com 0:
+../../Binary/Apps/fat.com 0:
+../../Binary/Apps/fdu.com 0:
+../../Binary/Apps/format.com 0:
+../../Binary/Apps/inttest.com 0:
+../../Binary/Apps/mode.com 0:
+../../Binary/Apps/rtc.com 0:
+../../Binary/Apps/survey.com 0:
+../../Binary/Apps/syscopy.com 0:
+../../Binary/Apps/sysgen.com 0:
+../../Binary/Apps/talk.com 0:
+../../Binary/Apps/timer.com 0:
+../../Binary/Apps/tune.com 0:
+../../Binary/Apps/xm.com 0:
+#
+../../Binary/Apps/i2clcd.com 2:
+../../Binary/Apps/i2cscan.com 2:
+../../Binary/Apps/rtcds7.com 2:
+../../Binary/Apps/rtchb.com 2:
+../../Binary/Apps/ppidetst.com 2:
+../../Binary/Apps/ramtest.com 2:
+../../Binary/Apps/tstdskng.com 2:
 #
 # Add Tune sample files
 #
 ../../Binary/Apps/Tunes/*.pt? 3:
 ../../Binary/Apps/Tunes/*.mym 3:
 #
+# Add CPNET client files
+#
+cpnet3/*.* 4:
+#
 # Add Common Applications
 #
 Common/*.* 0:
+supp/cpm3/*.* 0:

Source/Images/d_nzcom.txt

@@ -1,18 +1,47 @@
 #
 # Add RomWBW utilities
 #
-../../Binary/Apps/*.com 0:
+#../../Binary/Apps/*.com 0:
+../../Binary/Apps/assign.com 0:
+../../Binary/Apps/fat.com 0:
+../../Binary/Apps/fdu.com 0:
+../../Binary/Apps/format.com 0:
+../../Binary/Apps/inttest.com 0:
+../../Binary/Apps/mode.com 0:
+../../Binary/Apps/rtc.com 0:
+../../Binary/Apps/survey.com 0:
+../../Binary/Apps/syscopy.com 0:
+../../Binary/Apps/sysgen.com 0:
+../../Binary/Apps/talk.com 0:
+../../Binary/Apps/timer.com 0:
+../../Binary/Apps/tune.com 0:
+../../Binary/Apps/xm.com 0:
+#
+../../Binary/Apps/i2clcd.com 2:
+../../Binary/Apps/i2cscan.com 2:
+../../Binary/Apps/rtcds7.com 2:
+../../Binary/Apps/rtchb.com 2:
+../../Binary/Apps/ppidetst.com 2:
+../../Binary/Apps/ramtest.com 2:
+../../Binary/Apps/tstdskng.com 2:
 #
 # Add Tune sample files
 #
 ../../Binary/Apps/Tunes/*.pt? 3:
 ../../Binary/Apps/Tunes/*.mym 3:
+##
+## Add CPNET client files
+##
+#cpnet12/*.* 4:
 #
 # Add OS images
 #
-../CPM22/cpm_wbw.sys 0:cpm.sys
 ../ZSDOS/zsys_wbw.sys 0:zsys.sys
 #
 # Add Common Applications
 #
 Common/*.* 0:
+supp/cpm22/*.* 0:
+supp/z3/u10/*.* 0:
+supp/z3/u14/*.* 0:
+supp/z3/u15/*.* 0: