mirror of https://github.com/wwarthen/RomWBW.git
Wayne Warthen
3 years ago
54 changed files with 501 additions and 285 deletions
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,4 +0,0 @@ |
|||
@echo off |
|||
setlocal |
|||
|
|||
pushd ZZR && call Build || exit /b & popd |
|||
@ -0,0 +1,4 @@ |
|||
@echo off |
|||
setlocal |
|||
|
|||
pushd ZZRC && call Build || exit /b & popd |
|||
@ -1,32 +0,0 @@ |
|||
; |
|||
;================================================================================================== |
|||
; RC2014 Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZ80MB) |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "Config/RCZ280_nat.asm" |
|||
; |
|||
RAMLOC .SET 23 ; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE |
|||
RAMBIAS .SET (1 << (RAMLOC - 10)) ; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE |
|||
; |
|||
Z2U0HFC .SET TRUE ; Z2U 0: ENABLE HARDWARE FLOW CONTROL |
|||
@ -1,43 +0,0 @@ |
|||
; |
|||
;================================================================================================== |
|||
; RC2014 Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRCC) |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "Config/RCZ280_nat.asm" |
|||
; |
|||
CPUOSC .SET 14745600 ; CPU OSC FREQ IN MHZ |
|||
; |
|||
RAMSIZE .SET 256 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|||
ROMSIZE .SET 256 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|||
ROMSIZE_CHK .SET 256 ; ROMSIZE VALUE VEREIFICATION (0=DISABLED) |
|||
; |
|||
RAMLOC .SET 18 ; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE |
|||
RAMBIAS .SET (1 << (RAMLOC - 10)) ; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE |
|||
; |
|||
MDROM .SET TRUE ; MD: ENABLE ROM DISK |
|||
MDRAM .SET FALSE ; MD: ENABLE RAM DISK |
|||
; |
|||
; |
|||
Z2UOSC .SET (CPUOSC / 8) ; Z2U: OSC FREQUENCY IN MHZ |
|||
Z2U0HFC .SET TRUE ; Z2U0: ENABLE HARDWARE FLOW CONTROL |
|||
@ -0,0 +1,68 @@ |
|||
; |
|||
;================================================================================================== |
|||
; RC2014 Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZ80MB) |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE PLATFORM_NAME "ZZ80MB", " [", CONFIG, "]" |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "cfg_rcz280.asm" |
|||
; |
|||
CPUOSC .SET 12000000 ; CPU OSC FREQ IN MHZ |
|||
INTMODE .SET 3 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2 |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
; |
|||
MEMMGR .SET MM_Z280 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280] |
|||
; |
|||
RAMLOC .SET 23 ; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE |
|||
RAMBIAS .SET (1 << (RAMLOC - 10)) ; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE |
|||
; |
|||
Z280_MEMLOWAIT .SET 0 ; Z280: LOW 8MB MEMORY WAIT STATES (0-3) |
|||
Z280_MEMHIWAIT .SET 0 ; Z280: HIGH 8MB MEMORY WAIT STATES (0-3) |
|||
Z280_IOWAIT .SET 1 ; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3) |
|||
Z280_INTWAIT .SET 0 ; Z280: INT ACK WAIT STATUS (0-3) |
|||
; |
|||
Z2UENABLE .SET TRUE ; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM) |
|||
Z2U0HFC .SET TRUE ; Z2U 0: ENABLE HARDWARE FLOW CONTROL |
|||
UARTENABLE .SET TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
|||
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
|||
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
|||
; |
|||
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
|||
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD] |
|||
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER) |
|||
VDAEMU_SERKBD .SET 0 ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
|||
; |
|||
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER |
|||
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC] |
|||
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
|||
; |
|||
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|||
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC] |
|||
; |
|||
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|||
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|||
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
|||
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY |
|||
; |
|||
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|||
@ -0,0 +1,76 @@ |
|||
; |
|||
;================================================================================================== |
|||
; RC2014 Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC) |
|||
;================================================================================================== |
|||
; |
|||
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE |
|||
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS |
|||
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE |
|||
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS. |
|||
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY |
|||
; YOUR FILE IN THE BUILD PROCESS. |
|||
; |
|||
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM. |
|||
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO |
|||
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON |
|||
; SETTINGS. |
|||
; |
|||
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE, |
|||
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING |
|||
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS! |
|||
; |
|||
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO |
|||
; DIRECTORIES ABOVE THIS ONE). |
|||
; |
|||
#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]" |
|||
; |
|||
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT |
|||
; |
|||
#include "cfg_rcz280.asm" |
|||
; |
|||
CPUOSC .SET 14745600 ; CPU OSC FREQ IN MHZ |
|||
INTMODE .SET 3 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2 |
|||
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP |
|||
; |
|||
MEMMGR .SET MM_Z280 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280] |
|||
; |
|||
RAMSIZE .SET 256 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|||
ROMSIZE .SET 256 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!) |
|||
ROMSIZE_CHK .SET 256 ; ROMSIZE VALUE VERIFICATION (0=DISABLED) |
|||
; |
|||
RAMLOC .SET 18 ; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE |
|||
RAMBIAS .SET (1 << (RAMLOC - 10)) ; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE |
|||
; |
|||
Z280_MEMLOWAIT .SET 0 ; Z280: LOW 8MB MEMORY WAIT STATES (0-3) |
|||
Z280_MEMHIWAIT .SET 0 ; Z280: HIGH 8MB MEMORY WAIT STATES (0-3) |
|||
Z280_IOWAIT .SET 1 ; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3) |
|||
Z280_INTWAIT .SET 0 ; Z280: INT ACK WAIT STATUS (0-3) |
|||
; |
|||
MDROM .SET TRUE ; MD: ENABLE ROM DISK |
|||
MDRAM .SET FALSE ; MD: ENABLE RAM DISK |
|||
; |
|||
Z2UENABLE .SET TRUE ; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM) |
|||
Z2UOSC .SET (CPUOSC / 8) ; Z2U: OSC FREQUENCY IN MHZ |
|||
Z2U0HFC .SET TRUE ; Z2U0: ENABLE HARDWARE FLOW CONTROL |
|||
UARTENABLE .SET TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM) |
|||
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM) |
|||
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM) |
|||
; |
|||
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM) |
|||
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|RC|RCV9958|RCKBD] |
|||
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER) |
|||
VDAEMU_SERKBD .SET 0 ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD |
|||
; |
|||
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER |
|||
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC] |
|||
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER |
|||
; |
|||
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM) |
|||
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC] |
|||
; |
|||
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM) |
|||
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM) |
|||
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM) |
|||
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY |
|||
; |
|||
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM) |
|||
@ -1,42 +0,0 @@ |
|||
@echo off |
|||
setlocal |
|||
|
|||
set ROMFILE=..\..\Binary\RCZ280_nat_zzr.rom |
|||
set ROMSIZE=262144 |
|||
|
|||
if not exist %ROMFILE% goto :eof |
|||
|
|||
:: |
|||
:: The ROM image *must* be exactly 256K or the resulting disk |
|||
:: image produced below will be invalid. Check for the proper size. |
|||
:: |
|||
|
|||
call :filesize %ROMFILE% |
|||
|
|||
if "%FILESIZE%" neq "%ROMSIZE%" ( |
|||
echo. |
|||
echo. |
|||
echo ERROR: "%ROMFILE%" is not exactly %ROMSIZE% bytes as required!!! |
|||
echo You must specify a ROMSIZE of "256" when building the ZZRCC ROM image. |
|||
echo. |
|||
echo. |
|||
exit /b 1 |
|||
) |
|||
|
|||
rem ..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_nat_zzr.rom -Binary -Exclude 0x5000 0x7000 zzr_romldr.hex -Intel -Output ..\..\Binary\RCZ280_nat_zzr.hex -Intel || exit /b |
|||
|
|||
..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_nat_zzr.rom -Binary -Output ..\..\Binary\RCZ280_nat_zzr.hex -Intel || exit /b |
|||
|
|||
rem ..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_nat_zzr.hex -Intel -Output ..\..\Binary\RCZ280_nat_zzr_ldr.rom -Binary || exit /b |
|||
|
|||
rem copy /b zzr_cfldr.bin + zzr_ptbl.bin + zzr_fill_1.bin + zzr_mon.bin + zzr_fill_2.bin + ..\..\Binary\RCZ280_nat_zzr_ldr.rom + zzr_fill_3.bin ..\..\Binary\hd1k_zzr_prefix.dat || exit /b |
|||
|
|||
copy /b zzr_cfldr.bin + zzr_ptbl.bin + zzr_fill_1.bin + zzr_mon.bin + zzr_fill_2.bin + ..\..\Binary\RCZ280_nat_zzr.rom + zzr_fill_3.bin ..\..\Binary\hd1k_zzr_prefix.dat || exit /b |
|||
|
|||
copy /b ..\..\Binary\hd1k_zzr_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zzr_combo.img || exit /b |
|||
|
|||
goto :eof |
|||
|
|||
:filesize |
|||
set FILESIZE=%~z1 |
|||
goto :eof |
|||
@ -1,33 +0,0 @@ |
|||
HD1KZZRPREFIX = hd1k_zzr_prefix.dat |
|||
HD1KZZZROMBOIMG = hd1k_zzr_combo.img |
|||
ZZRROM = ../../Binary/RCZ280_nat_zzr.rom |
|||
ZZRROMHEX = RCZ280_nat_zzr.hex |
|||
HD1KIMGS = ../../Binary/hd1k_cpm22.img ../../Binary/hd1k_zsdos.img ../../Binary/hd1k_nzcom.img \
|
|||
../../Binary/hd1k_cpm3.img ../../Binary/hd1k_zpm3.img ../../Binary/hd1k_ws4.img |
|||
ZZRROMSIZE = 262144 |
|||
|
|||
OBJECTS := |
|||
|
|||
ifneq ($(wildcard $(ZZRROM)),) |
|||
OBJECTS += $(ZZRROMHEX) $(HD1KZZRPREFIX) $(HD1KZZZROMBOIMG) |
|||
endif |
|||
|
|||
DEST=../../Binary |
|||
|
|||
TOOLS = ../../Tools |
|||
|
|||
include $(TOOLS)/Makefile.inc |
|||
|
|||
DIFFPATH = $(DIFFTO)/Binary |
|||
|
|||
zzrromchk: |
|||
[ `wc -c $(ZZRROM) | awk '{print $$1}'` = $(ZZRROMSIZE) ] |
|||
|
|||
$(HD1KZZRPREFIX): zzrromchk |
|||
cat zzr_cfldr.bin zzr_ptbl.bin zzr_fill_1.bin zzr_mon.bin zzr_fill_2.bin $(ZZRROM) zzr_fill_3.bin >$@ |
|||
|
|||
$(HD1KZZZROMBOIMG): zzrromchk $(HD1KZZRPREFIX) $(HD1KIMGS) |
|||
cat $(HD1KZZRPREFIX) $(HD1KIMGS) > $@ |
|||
|
|||
$(ZZRROMHEX): zzrromchk $(ZZRROM) |
|||
srec_cat $(ZZRROM) -Binary -Output $(ZZRROMHEX) -Intel -CRLF |
|||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -0,0 +1,42 @@ |
|||
:: @echo off |
|||
setlocal |
|||
|
|||
set ROMFILE=..\..\Binary\RCZ280_zzrc.rom |
|||
set ROMSIZE=262144 |
|||
|
|||
if not exist %ROMFILE% goto :eof |
|||
|
|||
:: |
|||
:: The ROM image *must* be exactly 256K or the resulting disk |
|||
:: image produced below will be invalid. Check for the proper size. |
|||
:: |
|||
|
|||
call :filesize %ROMFILE% |
|||
|
|||
if "%FILESIZE%" neq "%ROMSIZE%" ( |
|||
echo. |
|||
echo. |
|||
echo ERROR: "%ROMFILE%" is not exactly %ROMSIZE% bytes as required!!! |
|||
echo You must specify a ROMSIZE of "256" when building the ZZRCC ROM image. |
|||
echo. |
|||
echo. |
|||
exit /b 1 |
|||
) |
|||
|
|||
rem ..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_zzrc.rom -Binary -Exclude 0x5000 0x7000 zzrc_romldr.hex -Intel -Output ..\..\Binary\RCZ280_zzrc.hex -Intel || exit /b |
|||
|
|||
..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_zzrc.rom -Binary -Output ..\..\Binary\RCZ280_zzrc.hex -Intel || exit /b |
|||
|
|||
rem ..\..\Tools\srecord\srec_cat.exe ..\..\Binary\RCZ280_zzrc.hex -Intel -Output ..\..\Binary\RCZ280_zzrc_ldr.rom -Binary || exit /b |
|||
|
|||
rem copy /b zzrc_cfldr.bin + zzrc_ptbl.bin + zzrc_fill_1.bin + zzrc_mon.bin + zzrc_fill_2.bin + ..\..\Binary\RCZ280_zzrc_ldr.rom + zzrc_fill_3.bin ..\..\Binary\hd1k_zzrc_prefix.dat || exit /b |
|||
|
|||
copy /b zzrc_cfldr.bin + zzrc_ptbl.bin + zzrc_fill_1.bin + zzrc_mon.bin + zzrc_fill_2.bin + ..\..\Binary\RCZ280_zzrc.rom + zzrc_fill_3.bin ..\..\Binary\hd1k_zzrc_prefix.dat || exit /b |
|||
|
|||
copy /b ..\..\Binary\hd1k_zzrc_prefix.dat + ..\..\Binary\hd1k_cpm22.img + ..\..\Binary\hd1k_zsdos.img + ..\..\Binary\hd1k_nzcom.img + ..\..\Binary\hd1k_cpm3.img + ..\..\Binary\hd1k_zpm3.img + ..\..\Binary\hd1k_ws4.img ..\..\Binary\hd1k_zzrc_combo.img || exit /b |
|||
|
|||
goto :eof |
|||
|
|||
:filesize |
|||
set FILESIZE=%~z1 |
|||
goto :eof |
|||
@ -0,0 +1,33 @@ |
|||
HD1KZZRCPREFIX = hd1k_zzrc_prefix.dat |
|||
HD1KZZRCCOMBOIMG = hd1k_zzrc_combo.img |
|||
ZZRCROM = ../../Binary/RCZ280_zzrc.rom |
|||
ZZRCROMHEX = RCZ280_zzrc.hex |
|||
HD1KIMGS = ../../Binary/hd1k_cpm22.img ../../Binary/hd1k_zsdos.img ../../Binary/hd1k_nzcom.img \
|
|||
../../Binary/hd1k_cpm3.img ../../Binary/hd1k_zpm3.img ../../Binary/hd1k_ws4.img |
|||
ZZRCROMSIZE = 262144 |
|||
|
|||
OBJECTS := |
|||
|
|||
ifneq ($(wildcard $(ZZRCROM)),) |
|||
OBJECTS += $(ZZRCROMHEX) $(HD1KZZRCPREFIX) $(HD1KZZRCCOMBOIMG) |
|||
endif |
|||
|
|||
DEST=../../Binary |
|||
|
|||
TOOLS = ../../Tools |
|||
|
|||
include $(TOOLS)/Makefile.inc |
|||
|
|||
DIFFPATH = $(DIFFTO)/Binary |
|||
|
|||
zzrcromchk: |
|||
[ `wc -c $(ZZRCROM) | awk '{print $$1}'` = $(ZZRCROMSIZE) ] |
|||
|
|||
$(HD1KZZRCPREFIX): zzrcromchk |
|||
cat zzrc_cfldr.bin zzrc_ptbl.bin zzrc_fill_1.bin zzrc_mon.bin zzrc_fill_2.bin $(ZZRCROM) zzrc_fill_3.bin >$@ |
|||
|
|||
$(HD1KZZRCCOMBOIMG): zzrcromchk $(HD1KZZRCPREFIX) $(HD1KIMGS) |
|||
cat $(HD1KZZRCPREFIX) $(HD1KIMGS) > $@ |
|||
|
|||
$(ZZRCROMHEX): zzrcromchk $(ZZRCROM) |
|||
srec_cat $(ZZRCROM) -Binary -Output $(ZZRCROMHEX) -Intel -CRLF |
|||
Loading…
Reference in new issue