Misc

- Update TUNE.COM to mute sound card at end of playback when playing via HBIOS.
- Update SN76489 sound driver to use proper default port addresses.
- Modify Phil's CPU MHz speed rounding function to round up anytime speed in KHz is withing 500 KHz of next MHz increment.

Source/Apps/Tune/tune.asm

@@ -43,6 +43,7 @@
 ;   2020-05-02 [PMS] Add support for SBC-V2 slow-io hack
 ;   2020-09-03 [E?B] Add support for Ed Brindley YM/AY Sound Card v6
 ;   2021-08-13 [WBW] Add support for LiNC Z50 Sound Card
+;   2021-08-17 [WBW] When playing via HBIOS, call BF_SNDRESET at end
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -649,7 +650,7 @@ TMP		.DB	0	; work around use of undocumented Z80
 HBIOSMD		.DB	0	; NON-ZERO IF USING HBIOS SOUND DRIVER, ZERO OTHERWISE
 OCTAVEADJ	.DB	0	; AMOUNT TO ADJUST OCTAVE UP OR DOWN
 
-MSGBAN		.DB	"Tune Player for RomWBW v3.3, 14-Aug-2021",0
+MSGBAN		.DB	"Tune Player for RomWBW v3.4, 17-Aug-2021",0
 MSGUSE		.DB	"Copyright (C) 2021, Wayne Warthen, GNU GPL v3",13,10
 		.DB	"PTxPlayer Copyright (C) 2004-2007 S.V.Bulba",13,10
 		.DB	"MYMPlay by Marq/Lieves!Tuore",13,10,13,10
@@ -674,7 +675,7 @@ HWSTR_RCEB6	.DB	"RC2014 Sound Module (EBv6)",0
 HWSTR_RCMF	.DB	"RC2014 Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
 
-MSGUNSUP	.db	"MYM files not supported yet!\r\n", 0
+MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0
 
 MSGSONGNAME     .DB     "Song name: ", 0
 MSGARTIST       .DB     "by:        ", 0
@@ -820,13 +821,22 @@ CHECKLP	LD HL,SETUP
 	INC (HL)
 	.ENDIF
 
-MUTE	XOR A
+MUTE	ISHBIOS
+	JR	NZ,MUTEVIAHBIOS
+
+	XOR A
 	LD H,A
 	LD L,A
 	LD (AYREGS+AmplA),A
 	LD (AYREGS+AmplB),HL
 	JP ROUT
 
+MUTEVIAHBIOS:
+	LD	B,BF_SNDRESET
+	LD	C,0
+	RST	08
+	RET
+
 INIT
 ;HL - AddressOfModule
 	LD A,(START+10)

Source/HBIOS/hbios.asm

@@ -5174,15 +5174,15 @@ HB_CPUSPD1:
 	SLA	L
 	RL	H
 ;
-	LD	(CB_CPUKHZ),HL
-	LD	DE,1000
-	CALL	DIV16
-	LD	DE,980			; ROUND MHZ UP
-	XOR	A			; IF WITHIN 20HZ
-	SBC	HL,DE
-	CCF
-	ADC	A,C
-	LD	(CB_CPUMHZ),A
+	LD	(CB_CPUKHZ),HL		; HL=CPU SPEED IN KHZ
+	LD	DE,1000			; SET UP TO DIV BY 1000 FOR MHZ
+	CALL	DIV16			; BC=CPU MHZ, HL=REMAINDER
+	LD	DE,500			; SET UP TO ROUND UP
+	XOR	A			; IF WITHIN 500 KHZ
+	SBC	HL,DE			; REMAINDER - 500
+	CCF				; COMPLEMENT CF
+	ADC	A,C			; C -> A; ADD CF FOR ROUNDING
+	LD	(CB_CPUMHZ),A		; SAVE IT
 ;
 	RET
 ;

Source/HBIOS/sn76489.asm

@@ -13,10 +13,12 @@
 ;======================================================================
 ;
 
-SN76489_PORT_LEFT	.EQU	$FC	; PORTS FOR ACCESSING THE SN76489 CHIP (LEFT)
-SN76489_PORT_RIGHT	.EQU	$F8	; PORTS FOR ACCESSING THE SN76489 CHIP (RIGHT)
-;SN76489_PORT_LEFT	.EQU	$C7	; PORTS FOR ACCESSING THE SN76489 CHIP (LEFT)
-;SN76489_PORT_RIGHT	.EQU	$C8	; PORTS FOR ACCESSING THE SN76489 CHIP (RIGHT)
+SN76489_PORT_LEFT	.EQU	$FF	; PORTS FOR ACCESSING THE SN76489 CHIP (LEFT)
+SN76489_PORT_RIGHT	.EQU	$FB	; PORTS FOR ACCESSING THE SN76489 CHIP (RIGHT)
+;SN76489_PORT_LEFT	.EQU	$FC	; PORTS FOR ACCESSING THE SN76489 CHIP (LEFT)
+;SN76489_PORT_RIGHT	.EQU	$F8	; PORTS FOR ACCESSING THE SN76489 CHIP (RIGHT)
+;;SN76489_PORT_LEFT	.EQU	$C7	; PORTS FOR ACCESSING THE SN76489 CHIP (LEFT)
+;;SN76489_PORT_RIGHT	.EQU	$C8	; PORTS FOR ACCESSING THE SN76489 CHIP (RIGHT)
 SN7_IDAT		.EQU	0
 SN7_TONECNT		.EQU	3	; COUNT NUMBER OF TONE CHANNELS
 SN7_NOISECNT		.EQU	1	; COUNT NUMBER OF NOISE CHANNELS

Source/ver.inc

@@ -2,4 +2,4 @@
 #DEFINE	RMN	1
 #DEFINE	RUP	1
 #DEFINE	RTP	03
-#DEFINE BIOSVER	"3.1.1-pre.105"
+#DEFINE BIOSVER	"3.1.1-pre.106"

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	1
 rup	equ	1
 rtp	equ	0
 biosver	macro
-	db	"3.1.1-pre.105"
+	db	"3.1.1-pre.106"
 	endm