Upgrade BBCBASIC to v5

Source/Apps/BBCBASIC/Build.cmd

@@ -0,0 +1,23 @@
+@echo off
+setlocal
+
+set TOOLS=..\..\..\Tools
+
+set PATH=%TOOLS%\zxcc;%PATH%
+
+set CPMDIR80=%TOOLS%/cpm/
+
+zxcc z80asm -dist/FM
+zxcc z80asm -main/FM
+zxcc z80asm -exec/FM
+zxcc z80asm -eval/FM
+zxcc z80asm -asmb/FM
+zxcc z80asm -cmos/FM
+zxcc z80asm -math/FM
+zxcc z80asm -hook/FM
+zxcc z80asm -data/FM
+
+zxcc slrnk -/v,/a:0100,dist,main,exec,eval,asmb,math,hook,cmos,/p:4B00,data,bbcbasic/n,/e
+
+copy /Y bbcbasic.com ..\..\..\Binary\Apps\ || exit /b
+copy /Y bbcbasic.txt ..\..\..\Binary\Apps\ || exit /b

Source/Apps/BBCBASIC/Clean.cmd

@@ -0,0 +1,9 @@
+@echo off
+setlocal
+
+if exist *.com del *.com
+if exist *.lst del *.lst
+if exist *.hex del *.hex
+if exist *.prn del *.prn
+if exist *.rel del *.rel
+if exist *.sym del *.sym

Source/Apps/BBCBASIC/Makefile

@@ -0,0 +1,11 @@
+OBJECTS = bbcbasic.com
+DOCS = bbcbasic.txt
+DEST = ../../../Binary/Apps
+DOCDEST = ../../../Binary/Apps
+TOOLS = ../../../Tools
+OTHERS = *.rel
+
+include $(TOOLS)/Makefile.inc
+
+bbcbasic.com: dist.rel main.rel exec.rel eval.rel asmb.rel cmos.rel math.rel hook.rel data.rel
+	$(ZXCC) SLRNK -/V,/A:0100,DIST,MAIN,EXEC,EVAL,ASMB,MATH,HOOK,CMOS,/P:4B00,DATA,BBCBASIC/N,/E

Source/Apps/BBCBASIC/bbcbasic.txt

@@ -1,3 +1,20 @@
+This is a RomWBW HBIOS adaptation of BBCBASIC v5.00.  The
+cursor and screen management assumes the use of an ANSI/VT-100 terminal
+which is generally correct for RomWBW.  Support for a hardware system
+timer is also implemented.  If your system does not have a hardware
+timer, the TIME function will always return 0 and the timeout
+parameter of the INKEY(n) function will not be observed (will never
+timeout).
+
+What follows is some basic information on BBCBASIC from the
+distribution.  Note that it starts with the v3.00 information and
+later on provides information on the changes in v5.00.
+
+-- WBW 1:15 PM 5/30/2024
+
+
+
+
                               BBC BASIC (Z80)
 
                          Generic CP/M Version 3.00
@@ -366,4 +383,73 @@
      198  Disk full                254  Bad command
      200  Close error              255  CP/M error
      204  Bad name
-
+
+
+New features in BBC BASIC (Z80) version 5.00, May 2024:
+
+1. BASIC V statements
+
+1.1  WHILE...ENDWHILE
+1.2  Multi-line IF...THEN...ELSE...ENDIF
+1.3  CASE...WHEN...OTHERWISE...ENDCASE
+1.4  LOCAL DATA / RESTORE DATA
+1.5  ON ERROR LOCAL / RESTORE ERROR
+1.6  DIM var LOCAL size 
+1.7  ERROR err, message$
+1.8  RESTORE +n
+1.9  SWAP var1,var2
+1.10 BPUT #file,string$[;]
+1.11 QUIT
+
+2. BASIC V functions
+
+2.1  DIM(array()[,sub])
+2.2  END (pointer to free space)
+2.3  REPORT$
+2.4  Binary constants
+2.5  LEFT$ & RIGHT$ with last parameter omitted
+2.6  MOD(array)
+2.7  SUM(array)
+2.8  SUMLEN(array)
+2.9  GET$#file 
+
+3. BASIC V whole array operations
+
+3.1  Pass a whole array to a FN/PROC
+3.2  Pass a whole array to CALL
+3.3  Whole array assignment
+3.4  Whole array arithmetic *
+3.5  Array dot-product operator
+3.6  Array initialisation lists
+3.7  Array compound assignment (+= etc.)
+3.8  Make a whole array LOCAL
+3.9  DIM a LOCAL array (on the stack) + 
+
+* String array expressions A$() = B$() + C$() are not currently supported.
++ LOCAL string arrays should be initialised to their maximum needed length
+  to eliminate the risk of a memory leak each time the PROC/FN is called:
+     LOCAL a$() : DIM a$(size%) : a$() = STRING$(max%, "a") : a$() = ""
+
+4. Miscellaneous BASIC V features
+
+4.1  Bit-shifts <<, >>, >>>
+4.2  Floating-point indirection (|)
+4.3  RETURNed parameters from FN/PROC
+4.4  Compound assignment (+=, -=, *=, /= etc.)
+4.5  Assigning to a sub-string: LEFT$()=, MID$()= , RIGHT$()=
+4.6  Hooks for CIRCLE,ELLIPSE,FILL,LINE,MOUSE,ORIGIN,RECTANGLE,TINT,SYS,WAIT
+4.7  Hooks for WIDTH function, TINT function, MODE function
+
+5. Extensions to Acorn's BASIC V, compatible with BB4W, BBCSDL and BBCTTY
+
+5.1  EXIT REPEAT / WHILE / FOR [var]
+5.2  Address-of operator ^
+5.3  Byte variables and arrays (& suffix)
+5.4  'BY len' and 'TO term' qualifiers to GET$#file
+5.5  ELSE IF <condition> THEN; (trailing semicolon)
+5.6  == synonymous with = in comparisons
+5.7  DIM a global array inside a FN/PROC (use RETURN)
+
+Note: The token for PUT has changed from &CE in version 3 to &0E in version 5.
+If this token is present in existing programs it will list as ENDWHILE rather
+than PUT, and the programs will need to be modified to restore functionality.

Source/Apps/BBCBASIC/data.z80

@@ -0,0 +1,69 @@
+	TITLE	BBC BASIC (C) R.T.RUSSELL 1981-2024
+	NAME	('DATA')
+;
+;RAM MODULE FOR BBC BASIC INTERPRETER
+;FOR USE WITH VERSION 5.0 OF BBC BASIC
+;(C) COPYRIGHT R.T.RUSSELL 1981-2024
+;
+	GLOBAL	ACCS
+	GLOBAL	BUFFER
+	GLOBAL	ONERSP
+	GLOBAL	LIBASE
+	GLOBAL	PAGE
+	GLOBAL	LOMEM
+	GLOBAL	FREE
+	GLOBAL	HIMEM
+	GLOBAL	RANDOM
+	GLOBAL	COUNT
+	GLOBAL	WIDTH
+	GLOBAL	ERL
+	GLOBAL	ERR
+	GLOBAL	ERRTRP
+	GLOBAL	ERRTXT
+	GLOBAL	TRACEN
+	GLOBAL	AUTONO
+	GLOBAL	INCREM
+	GLOBAL	LISTON
+	GLOBAL	DATPTR
+	GLOBAL	FNPTR
+	GLOBAL	PROPTR
+	GLOBAL	STAVAR
+	GLOBAL	OC
+	GLOBAL	PC
+	GLOBAL	DYNVAR
+	GLOBAL	CURLIN
+	GLOBAL	USER
+;
+;n.b. ACCS, BUFFER & STAVAR must be on page boundaries.
+;
+ACCS:	DEFS	256		;STRING ACCUMULATOR
+BUFFER:	DEFS	256		;STRING INPUT BUFFER
+STAVAR:	DEFS	27*4		;STATIC VARIABLES
+OC	EQU	STAVAR+15*4	;CODE ORIGIN (O%)
+PC	EQU	STAVAR+16*4	;PROGRAM COUNTER (P%)
+DYNVAR:	DEFS	54*2		;DYN. VARIABLE POINTERS
+FNPTR:	DEFS	2		;DYN. FUNCTION POINTER
+PROPTR:	DEFS	2		;DYN. PROCEDURE POINTER
+;
+PAGE:	DEFS	2		;START OF USER PROGRAM
+LOMEM:	DEFS	2		;START OF DYN. STORAGE
+FREE:	DEFS	2		;FIRST FREE-SPACE BYTE
+HIMEM:	DEFS	2		;FIRST BYTE ABOVE STACK
+LIBASE:	DEFS	2		;START OF FIRST LIBRARY
+;
+TRACEN:	DEFS	2		;TRACE FLAG AND NUMBER
+AUTONO:	DEFS	2		;AUTO FLAG AND NUMBER
+ERRTRP:	DEFS	2		;ON ERROR STMT POINTER \
+ONERSP:	DEFS	2		;ON ERROR LOCAL STKPTR /
+ERRTXT:	DEFS	2		;ERROR MESSAGE POINTER
+DATPTR:	DEFS	2		;DATA POINTER
+ERL:	DEFS	2		;LINE NO OF LAST ERROR
+CURLIN:	DEFS	2		;POINTER TO CURRENT LINE
+RANDOM:	DEFS	5		;RANDOM NUMBER
+COUNT:	DEFS	1		;PRINT POSITION
+WIDTH:	DEFS	1		;PRINT WIDTH
+ERR:	DEFS	1		;ERROR NUMBER
+LISTON:	DEFS	1		;LISTO & OPT FLAG
+INCREM:	DEFS	1		;AUTO INCREMENT
+;
+USER:	END

Source/Apps/BBCBASIC/dist.z80

@@ -1,7 +1,8 @@
-	TITLE	BBCDIST.Z80 (C) R.T.RUSSELL 1982
+	TITLE	BBCDIST.Z80 (C) R.T.RUSSELL 1982-2024
+	NAME	('DIST3')
 ;
-;BBC BASIC (Z80) - CP/M VERSION 2.30 & 3.00
-;(C) COPYRIGHT R.T.RUSSELL, 1982.
+;BBC BASIC (Z80) - CP/M VERSION 2.20 & 3.00
+;(C) COPYRIGHT R.T.RUSSELL, 1982-2024.
 ;ALL RIGHTS RESERVED.
 ;
 ;THIS PROGRAM ALLOWS THE USER TO ADAPT BBC BASIC TO THE
@@ -13,11 +14,14 @@
 ;PLEASE NOTE THAT A Z80 PROCESSOR AND CP/M VERSION 2.2
 ;OR LATER ARE REQUIRED.
 ;
-;R.T.RUSSELL, 11-03-1984, 03-05-1989
-;ALTERNATE REGISTERS SAVED FOR BDOS CALL, 04-06-2000
+;R.T.RUSSELL, 11-03-1984, 03-05-1989, 12-05-2024
 ;
 CPM	EQU	5
 COLD	EQU	200H
+;
+CR	EQU	0DH
+LF	EQU	0AH
+ESC	EQU	1BH
 ;
 	GLOBAL	CLRSCN
 	GLOBAL	PUTCSR
@@ -26,14 +30,18 @@ COLD	EQU	200H
 	GLOBAL	GETIME
 	GLOBAL	GETKEY
 	GLOBAL	BYE
+	GLOBAL	BEGIN
+;	GLOBAL	BDOS
 ;
-	ASEG
-	ORG	100H
+;	EXTRN	PRTDEC16
+;
+	;ASEG
+	;ORG	100H
 ;
 ;JUMP TABLE - BASIC makes calls to hardware-dependent
 ;features via this table:
 ;
-	JP	INIT
+BEGIN:	JP	INIT
 CLRSCN:	JP	CLS		;CLEAR SCREEN
 PUTCSR:	JP	PCSR		;SET CURSOR POSN.
 GETCSR:	JP	GCSR		;READ CURSOR POSN.
@@ -42,30 +50,33 @@ GETIME:	JP	GTIME		;READ ELAPSED TIME
 GETKEY:	JP	INKEY		;READ KEY (TIME LIMIT)
 BYE:	JP	REBOOT		;RETURN TO CP/M
 ;
-;THE CODE WHICH FOLLOWS IS A SKELETON VERSION SUITABLE
-;FOR ANY CP/M SYSTEM.  IT HAS BEEN CONFIGURED FOR A VT100 TO SOME DEGREE
-;BY PETER SCHORN.
+;BDOS	- Save the IX and IY registers and before performing a
+;	  CP/M function call.
+;
+BDOS:	PUSH	IX
+	PUSH	IY
+	CALL	CPM
+	POP	IY
+	POP	IX
+	RET
 ;
-
-PRSTR	EQU	9
-
 ;INIT	- Perform hardware initialisation (if any).
 ;
-INIT:	LD	A,2
-	INC	A
-	LD	DE,NOTZ80
-	JP	PE,FAIL
-	LD	C,12
-	CALL	BDOS
-	OR	A
-	LD	DE,NOTV2
-	JP	NZ,COLD
-FAIL:	LD	C,PRSTR
+INIT:	LD	HL,40H		;CPM/HBIOS MARKER LOC
+	LD	A,'W'
+	CP	(HL)
+	JR	NZ,FAIL
+	INC	HL
+	LD	A,NOT 'W'
+	CP	(HL)
+	JR	NZ,FAIL
+	JP	COLD
+FAIL:	LD	DE,NOTHB
+	LD	C,9
 	CALL	BDOS
 	RST	0
 ;
-NOTZ80:	DEFB	'Wrong processor$'
-NOTV2:	DEFB	'Wrong CP/M version$'
+NOTHB:	DEFB	'CP/M w/ HBIOS required$'
 ;
 ;REBOOT	- Switch off interrupts and return to CP/M
 ;
@@ -75,31 +86,34 @@ REBOOT:	RST	0
 ;  	  Outputs: DEHL = elapsed time (centiseconds)
 ; 	  Destroys: A,D,E,H,L,F
 ;
-GTIME:	LD	DE,0
-	LD	HL,0
-	RET
+GTIME:	JR	TICKS
 ;
 ;PTIME	- Load elapsed-time clock.
 ;   	  Inputs: DEHL = time to load (centiseconds)
 ; 	  Destroys: A,D,E,H,L,F
 ;
-PTIME:	RET
-;
-;CLS	- Clear screen for VT100.
-; 	  Destroys: A,D,E,H,L,F
-;
-CLS:	PUSH	BC		; save BC
-	LD	C,PRSTR		; command for output string
-	LD	DE,CLSSTR	; start address of string
-	CALL	BDOS		; output to terminal
-	POP	BC		; restore BC
+PTIME:
+	LD	BC,0F9D0H
+	SRL	D
+	RR	E
+	RR	H
+	RR	L
+	RST	08
+	RET
+;
+; Get OS elapsed-time clock
+;  Outputs: DEHL = time (centiseconds)
+; Destroys: A,B,C,D,E,H,L,F
+;
+TICKS:	LD	BC,0F8D0H
+	RST	08
+	SLA	L
+	RL	H
+	RL	E
+	RL	D
 	RET
-CLSSTR:	DEFB	27,'[2J$'	; VT100 string for clear screen
-
 ;
 ;INKEY	- Sample keyboard with specified wait.
-;	  This version uses a simple software timing loop.
-;	  Modify to use hardware/interrupt timer if available.
 ;   	  Inputs: HL = Time to wait (centiseconds)
 ;  	  Outputs: Carry reset indicates time-out.
 ;                  If carry set, A = character typed.
@@ -107,52 +121,64 @@ CLSSTR:	DEFB	27,'[2J$'	; VT100 string for clear screen
 ;
 INKEY:	PUSH	BC
 	PUSH	HL
+	CALL	TICKS
+	POP	DE
+	ADD	HL,DE
+WAIT:	PUSH	HL
 	LD	C,6
 	LD	E,0FFH
-	CALL	BDOS		;CONSOLE INPUT
+	CALL	BDOS
 	POP	HL
-	POP	BC
 	OR	A
 	SCF
-	RET	NZ		;KEY PRESSED
-	OR	H
-	OR	L
-	RET	Z		;TIME-OUT
-	PUSH	BC
-	LD	A,-1
-	LD	BC,1250		;DELAY CONSTANT
-WAIT:	DEC	BC
-	CP	B
-	JP	NZ,WAIT		;WAIT FOR APPROX 10ms
-	POP	BC
-	DEC	HL
-	JR	INKEY
+	JR	NZ,INKEY1
+	PUSH	HL
+	CALL	TICKS
+	POP	DE
+	SBC	HL,DE
+	EX	DE,HL
+	JR	C,WAIT	
+INKEY1:	POP	BC
+	RET
+;
+;CLS	- Clear screen.
+;	  (Customise to suit your VDU)
+; 	  Destroys: A,D,E,H,L,F
+;
+CLS:
+	LD	DE,CLSSTR
+	LD	C,9
+	JP	BDOS
+;
+CLSSTR:	DEFB	ESC,'[H',ESC,'[2J$'
 ;
 ;PCSR	- Move cursor to specified position.
 ;   	  Inputs: DE = horizontal position (LHS=0)
 ;                 HL = vertical position (TOP=0)
-; called by TAB(column, row)
+; 	  Destroys: A,D,E,H,L,F
+;
 PCSR:	LD	B,L		; vertical = line (row)
 	CALL	CONV		; normalized and convert to decimal
 	LD	(LIN),HL	; and store into string
 	LD	B,E		; horizontal = column
 	CALL	CONV		; normalized and convert to decimal
 	LD	(COL),HL	; and store into string
-	LD	C,PRSTR		; output string command
+	LD	C,9		; output string command
 	LD	DE,CURS		; start of string
-	JR	BDOS		; output string to terminal
-
+	JP	BDOS		; output string to terminal
+;
 ; VT100 sequence for cursor positioning
 CURS:	DEFB	27, '['
 LIN:	DEFW	0		; high byte, low byte for decimal line
 	DEFB	';'
 COL:	DEFW	0		; high byte, low byte for decimal column
 	DEFB	'H$'
-
+;
 ; convert binary B (0 <= B < 99, not checked) into B+1 in decimal.
 ; L = upper byte, H = lower byte. ready for LD (...), HL
 ; destroys A, B, L, H
 ; optimized for space over time
+;
 CONV:	INC	B		; normalize, home in VT100 is (1,1)
 	LD	A,'0'		; A is counter for low byte of result
 	LD	L,A		; L is counter for high byte of result
@@ -164,35 +190,7 @@ CONVLP:	INC	A		; now B times increment AL in decimal
 CONT:	DJNZ	CONVLP		; B times
 	LD	H,A		; put low byte into right place
 	RET
-
-
-;BDOS   - Save the IX and IY and alternate registers
-;         before performing a CP/M function call.
 ;
-BDOS:	PUSH	IX
-	PUSH	IY
-        EXX
-        PUSH    BC
-        PUSH    DE
-        PUSH    HL
-        EXX
-        EX      AF,AF'
-        PUSH    AF
-        EX      AF,AF'
-	CALL	CPM
-        EX      AF,AF'
-        POP     AF
-        EX      AF,AF'
-        EXX
-        POP     HL
-        POP     DE
-        POP     BC
-        EXX
-	POP	IY
-	POP	IX
-	RET
-
-
 ;GCSR	- Return cursor coordinates.
 ;   	  Outputs:  DE = X coordinate (POS)
 ;                   HL = Y coordinate (VPOS)
@@ -202,24 +200,42 @@ GCSR:	LD	DE,0
 	LD	HL,0
 	RET
 ;
-	IF	$ GT 1F4H
+;COUT - Output a character to the console
+;   Inputs: A = character
+; Destroys: A,F
+;
+COUT:	PUSH	BC
+	PUSH	DE
+	PUSH	HL
+	LD	E,A
+	LD	C,2
+	CALL	BDOS
+	POP	HL
+	POP	DE
+	POP	BC
+	RET
+;
+	;IF	$ GT 1F0H
+	IF	$-BEGIN GT 0F0H
 	ERROR	'INSUFFICIENT SPACE'
 	ENDIF
 ;
-	ORG	1F4H
+	;ORG	1F0H
+	DEFS	0F0H - ($ - BEGIN)
 ;
+OFFLO:	DEFW	0		;TIME OFFSET LO
+OFFHI:	DEFW	0		;TIME OFFSET HI
 	DEFB	80		;WIDTH
-	DEFB	'E' AND 1FH	;CURSOR UP
-	DEFB	'X' AND 1FH	;CURSOR DOWN
-	DEFB	'A' AND 1FH	;START OF LINE
-	DEFB	'F' AND 1FH	;END OF LINE
-	DEFB	'T' AND 1FH	;DELETE TO END OF LINE
-	DEFB	'H' AND 1FH	;BACKSPACE
-	DEFB	'U' AND 1FH	;CANCEL LINE
-	DEFB	'S' AND 1FH	;CURSOR LEFT
-	DEFB	'D' AND 1FH	;CURSOR RIGHT
-	DEFB	'G' AND 1FH	;DELETE CHARACTER
-	DEFB	'V' AND 1FH	;INSERT CHARACTER
+	DEFB	'G' AND 1FH	;CURSOR UP
+	DEFB	'O' AND 1FH	;CURSOR DOWN
+	DEFB	'F' AND 1FH	;START OF LINE
+	DEFB	'N' AND 1FH	;END OF LINE
+	DEFB	'X' AND 1FH	;DELETE TO END OF LINE
+	DEFB	08H		;BACKSPACE & DELETE
+	DEFB	'U' AND 1FH	;DEL TO START OF LINE
+	DEFB	'J' AND 1FH	;CURSOR LEFT
+	DEFB	'L' AND 1FH	;CURSOR RIGHT
+	DEFB	'R' AND 1FH	;DELETE CHARACTER
+	DEFB	'Q' AND 1FH	;INS/OVR TOGGLE
 ;
 FIN:	END
-

Source/Apps/BBCBASIC/hook.z80

@@ -0,0 +1,64 @@
+	NAME	('HOOK')
+;
+	GLOBAL	CLG
+	GLOBAL	COLOUR
+	GLOBAL	DRAW
+	GLOBAL	ENVEL
+	GLOBAL	GCOL
+	GLOBAL	MODE
+	GLOBAL	MOVE
+	GLOBAL	PLOT
+	GLOBAL	SOUND
+	GLOBAL	PUTIMS
+	GLOBAL	CIRCLE
+	GLOBAL	ELLIPSE
+	GLOBAL	FILL
+	GLOBAL	MOUSE
+	GLOBAL	ORIGIN
+	GLOBAL	RECTAN
+	GLOBAL	LINE
+	GLOBAL	TINT
+	GLOBAL	WAIT
+	GLOBAL	SYS
+;
+	GLOBAL	ADVAL
+	GLOBAL	POINT
+	GLOBAL	GETIMS
+	GLOBAL	TINTFN
+	GLOBAL	MODEFN
+	GLOBAL	WIDFN
+;
+	EXTRN	EXTERR
+;
+CLG:
+COLOUR:
+DRAW:
+ENVEL:
+GCOL:
+MODE:
+MOVE:
+PLOT:
+SOUND:
+ADVAL:
+POINT:
+GETIMS:
+PUTIMS:
+CIRCLE:
+ELLIPSE:
+FILL:
+MOUSE:
+ORIGIN:
+RECTAN:
+LINE:
+TINT:
+TINTFN:
+MODEFN:
+WIDFN:
+WAIT:
+SYS:
+	XOR	A
+	CALL	EXTERR
+	DEFM	'Sorry'
+	DEFB	0
+;
+	END

Source/Apps/Build.cmd

@@ -30,6 +30,7 @@ pushd VGM && call Build || exit /b & popd
 pushd cpuspd && call Build || exit /b & popd
 pushd Survey && call Build || exit /b & popd
 pushd HTalk && call Build || exit /b & popd
+pushd BBCBASIC && call Build || exit /b & popd
 
 copy *.com %APPBIN%\ || exit /b
 

Source/Apps/Clean.cmd

@@ -19,3 +19,4 @@ pushd VGM && call Clean || exit /b 1 & popd
 pushd cpuspd && call Clean || exit /b 1 & popd
 pushd Survey && call Clean || exit /b 1 & popd
 pushd HTalk && call Clean || exit /b 1 & popd
+pushd BBCBASIC && call Clean || exit /b 1 & popd

Source/Apps/Makefile

@@ -1,6 +1,6 @@
 OBJECTS = sysgen.com syscopy.com assign.com format.com talk.com \
 	mode.com rtc.com timer.com rtchb.com
-SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey
+SUBDIRS = HTalk XM FDU FAT Tune Test ZMP ZMD Dev VGM cpuspd Survey BBCBASIC
 DEST = ../../Binary/Apps
 TOOLS =../../Tools
 

Source/Images/Common/UTILS/BBCDIST.SUB

@@ -1,13 +0,0 @@
-; patch BBCBASIC with BBCDIST
-; need M80 and L80
-xsub
-m80 =bbcdist/z
-l80 bbcdist,bbcdist/n/e
-ddt bbcbasic.org
-ibbcdist.com
-r
-g0
-save 58 bbcbasic.com
-era bbcdist.rel
-era bbcdist.com
-

Source/Images/hd_bp.txt

@@ -11,6 +11,8 @@
 #
 #../../Binary/Apps/*.com 15:
 ../../Binary/Apps/assign.com 15:
+../../Binary/Apps/bbcbasic.com 0:
+../../Binary/Apps/bbcbasic.txt 0:
 ../../Binary/Apps/cpuspd.com 15:
 ../../Binary/Apps/fat.com 15:
 ../../Binary/Apps/fdu.com 15:

Source/Images/hd_cpm22.txt

@@ -7,6 +7,8 @@ d_cpm22/ReadMe.txt 0:
 #
 #../../Binary/Apps/*.com 0:
 ../../Binary/Apps/assign.com 0:
+../../Binary/Apps/bbcbasic.com 0:
+../../Binary/Apps/bbcbasic.txt 0:
 ../../Binary/Apps/cpuspd.com 0:
 ../../Binary/Apps/fat.com 0:
 ../../Binary/Apps/fdu.com 0:

Source/Images/hd_cpm3.txt

@@ -23,6 +23,8 @@
 #
 #../../Binary/Apps/*.com 0:
 ../../Binary/Apps/assign.com 0:
+../../Binary/Apps/bbcbasic.com 0:
+../../Binary/Apps/bbcbasic.txt 0:
 ../../Binary/Apps/cpuspd.com 0:
 ../../Binary/Apps/fat.com 0:
 ../../Binary/Apps/fdu.com 0:

Source/Images/hd_nzcom.txt

@@ -24,6 +24,8 @@ d_zsdos/u0/*.* 0:
 #
 #../../Binary/Apps/*.com 0:
 ../../Binary/Apps/assign.com 0:
+../../Binary/Apps/bbcbasic.com 0:
+../../Binary/Apps/bbcbasic.txt 0:
 ../../Binary/Apps/cpuspd.com 0:
 ../../Binary/Apps/fat.com 0:
 ../../Binary/Apps/fdu.com 0:

Source/Images/hd_qpm.txt

@@ -11,6 +11,8 @@ d_cpm22/u0/*.* 0:
 #
 #../../Binary/Apps/*.com 0:
 ../../Binary/Apps/assign.com 0:
+../../Binary/Apps/bbcbasic.com 0:
+../../Binary/Apps/bbcbasic.txt 0:
 ../../Binary/Apps/cpuspd.com 0:
 ../../Binary/Apps/fat.com 0:
 ../../Binary/Apps/fdu.com 0:

Source/Images/hd_zpm3.txt

@@ -22,6 +22,8 @@
 #
 #../../Binary/Apps/*.com 15:
 ../../Binary/Apps/assign.com 15:
+../../Binary/Apps/bbcbasic.com 0:
+../../Binary/Apps/bbcbasic.txt 0:
 ../../Binary/Apps/cpuspd.com 15:
 ../../Binary/Apps/fat.com 15:
 ../../Binary/Apps/fdu.com 15:

Source/Images/hd_zsdos.txt

@@ -20,6 +20,8 @@ d_cpm22/u0/XSUB.COM 0:
 #
 #../../Binary/Apps/*.com 0:
 ../../Binary/Apps/assign.com 0:
+../../Binary/Apps/bbcbasic.com 0:
+../../Binary/Apps/bbcbasic.txt 0:
 ../../Binary/Apps/cpuspd.com 0:
 ../../Binary/Apps/fat.com 0:
 ../../Binary/Apps/fdu.com 0:

Source/ver.inc

@@ -2,7 +2,7 @@
 #DEFINE	RMN	5
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.5.0-dev.43"
+#DEFINE BIOSVER	"3.5.0-dev.44"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	5
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.5.0-dev.43"
+	db	"3.5.0-dev.44"
 	endm