Delete SBC_std_zpp.asm

Source/HBIOS/Config/SBC_std_zpp.asm

@@ -1,65 +0,0 @@
-;
-;==================================================================================================
-;   SBC STANDARD CONFIGURATION
-;==================================================================================================
-;
-#include "cfg_sbc.asm"
-;
-CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
-;
-FDENABLE	.SET	TRUE		; TRUE FOR FLOPPY DEVICE SUPPORT
-FDMODE		.SET	FDMODE_DIO3	; FDMODE_DIO, FDMODE_DIDE, FDMODE_DIO3
-INTMODE		.SET	2		; 0=NONE, 1=INT MODE 1, 2=INT MODE 2
-;
-
-;
-SDENABLE	.SET	FALSE		; TRUE FOR SD DEVICE SUPPORT
-SDMODE		.SET	SDMODE_PPI	; SDMODE_JUHA, SDMODE_PPI, SDMODE_DSD
-;
-PRPENABLE	.SET	FALSE		; TRUE FOR PROPIO BOARD SUPPORT (VIDEO, KBD, & SD CARD)
-;
-VGAENABLE	.SET	FALSE		; TRUE FOR VGA BOARD VIDEO & KBD SUPPORT 
-VGASIZ		.SET	V80X25		; DEFAULT VGA FORMAT IF ACTIVE
-CVDUENABLE	.SET	FALSE		; TRUE FOR CVDU BOARD VIDEO & KBD SUPPORT
-VDUENABLE	.SET	TRUE		; TRUE FOR VDU BOARD VIDEO & KBD SUPPORT
-VDUSIZ		.SET	V80X24B		; DEFAULT VDU FORMAT IF ACTIVE
-TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSMODE		.SET	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-USELZSA2	.SET	TRUE		; USE COMPRESSED FONTS.
-;
-CRTACT		.SET	FALSE		; TRUE TO ACTIVATE CRT AT STARTUP (BOOT ON CRT)
-
-PIO_4P		.SET	FALSE		; TRUE FOR ECB-4PIO PIO SUPPORT
-PIO_ZP		.SET	FALSE		; TRUE FOR ECB-ZILOG PERIPHERALS BOARD
-PPI_SBC		.SET	FALSE		; TRUE FOR SBC V2 8255 (IF NOT BEING USED FOR PPIDE)
-
-RFENABLE	.SET	TRUE		; TRUE FOR RAM FLOPPY SUPPORT
-RFCNT		.SET	2		; NUMBER OF RAM FLOPPY UNITS (MAX IS 4)
-
-SIOENABLE	.SET	FALSE		; TRUE FOR ZILOG SIO SUPPORT
-
-SPKENABLE	.SET	TRUE		; TRUE FOR RTC LATCH IOBIT SOUND
-AYENABLE	.SET	FALSE		; TRUE FOR AY PSG SOUND
-AY38910ENABLE	.EQU	TRUE
-
-WBWDEBUG	.SET	FALSE
-
-UFENABLE	.SET	TRUE
-FORCECON	.SET	2		; USB-FIFO
-
-BT_REC_TYPE	.SET	BT_REC_SBCRI	; SAFE MODE INPUT METHOD
-
-DSRTCCHG	.SET	TRUE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
-BATCOND		.SET	TRUE
-
-CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
-CTCBASE		.SET	$B0		; CTC BASE I/O ADDRESS
-
-UARTCASSPD	.SET	SER_600_8N1	; ECB CASSETTE UART DEFAULT SPEED
-;PPIDETRACE	.SET	0
-PPIDECNT	.SET	3
-DSKYENABLE	.SET	FALSE
-
-;BOOTTYPE	.SET	BT_AUTO	
-BOOT_TIMEOUT	.SET	30	
-;BOOT_DEFAULT	.SET	'8'