Enable SD by Default in RCZ80_std Config

- An additional SD Module has been developed by Stephen Cousins.  Since this module will be distributed as a kit, I think it makes sense to enable support by default.  It will do nothing on systems without an SD Module.

Source/HBIOS/Config/RCZ80_std.asm

@@ -75,9 +75,10 @@ IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
 ;
-SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80]
 SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
+;
 PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
 LPTENABLE	.SET	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)

Source/HBIOS/Makefile

@@ -7,7 +7,7 @@ MOREDIFF = game.bin hbios_rom.bin nascom.bin usrrom.bin \
 DEST = ../../Binary
 TOOLS =../../Tools
 OTHERS =  *.img *.rom *.com *.upd *.bin *.hex cpm.sys zsys.sys Build.inc font*.asm *.dat hbios_env.sh \
-	SysConfig/*.com SysConfig/*.bin Sysconfig/*.lst
+	SysConfig/*.com SysConfig/*.bin SysConfig/*.lst
 
 # DIFFMAKE = 1
 

Source/HBIOS/cfg_RCZ80.asm

@@ -307,7 +307,7 @@ PPIDE2A8BIT	.SET	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.SET	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
+SDMODE		.SET	SDMODE_PIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
 SDPPIBASE	.SET	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.SET	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
 SDTRACE		.SET	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)