mirror of
https://github.com/wwarthen/RomWBW.git
synced 2026-02-06 14:11:48 -06:00
Regen Doc
This commit is contained in:
Wayne Warthen
97
Source/BPBIOS/romwbw-m.lib
Normal file
97
Source/BPBIOS/romwbw-m.lib
Normal file
@@ -0,0 +1,97 @@
|
||||
;:::::::::::::::::::::::::::::::::::::::::::::::**********************
|
||||
; B/P BIOS Configuration and Equate File. ** System Dependant **
|
||||
; - Retro-Brew Processors W/ RomWBW HBIOS - **********************
|
||||
; HBIOS specific customizations
|
||||
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
||||
; BIOS Configuration Equates and Macros
|
||||
;
|
||||
; NOTE: Must make sure settings below match hardware and
|
||||
; HBIOS configuration.
|
||||
;
|
||||
HBIOS EQU YES ; Use HBIOS functions
|
||||
HBLOC EQU 0FE00H ; Location of HBIOS proxy (used if not INTPXY)
|
||||
;
|
||||
; Set exactly one of the following to YES to specify platform
|
||||
;
|
||||
SBC EQU NO
|
||||
ZETA EQU NO
|
||||
ZETA2 EQU NO
|
||||
N8 EQU NO
|
||||
MK4 EQU YES
|
||||
;
|
||||
; SIMH SUPPORT - only used with SBC
|
||||
IF SBC
|
||||
SIMH EQU YES ; Set yes if running on SimH
|
||||
ELSE
|
||||
SIMH EQU NO
|
||||
ENDIF
|
||||
;
|
||||
; Set to YES FOR BIOS clock support else NO If no clock
|
||||
;
|
||||
HBCLK EQU YES ; HBIOS clock driver
|
||||
;
|
||||
; Set HB_IODEV to appropriate console device
|
||||
;
|
||||
HB_IODEV EQU 0 ; Assume we want to use first HBIOS serial device
|
||||
; Change if using PROPIO etc.
|
||||
;
|
||||
; Set HB_HDDEV to appropriate hard disk driver
|
||||
;
|
||||
HB_HDDEV EQU 2 ; Assumes disk device #2 is first hard disk device
|
||||
;
|
||||
; Set HB_MDDEV to appropriate memory disk driver
|
||||
;
|
||||
HB_MDDEV EQU 0 ; Assumes disk device #0 is ROM disk device
|
||||
;
|
||||
; Floppy disk support
|
||||
;
|
||||
IF MK4 or SIMH
|
||||
DRV_O SET NO ; YES if system has flopy drives
|
||||
DRV_P SET NO ; YES if system has flopy drives
|
||||
ENDIF ;MK4 or SIMH
|
||||
;
|
||||
; RAM/ROM disk sizes expressed as count of 2K blocks
|
||||
;
|
||||
HB_RAMBLKS EQU 192 ; 512K - 128K reserved / 2K per block
|
||||
HB_ROMBLKS EQU 192 ; 512K - 128K reserved / 2K per block
|
||||
;HB_ROMBLKS EQU 448 ; 1024K - 128K reserved / 2K per block
|
||||
;
|
||||
; Layout of RAM banks
|
||||
;
|
||||
IF SBC OR ZETA OR ZETA2 OR MK4
|
||||
BID_RAMD EQU 80H
|
||||
BID_RAMM EQU 8BH
|
||||
BID_SYS EQU 8CH
|
||||
BID_HB EQU 8DH
|
||||
BID_USR EQU 8EH
|
||||
BID_COM EQU 8FH
|
||||
ENDIF
|
||||
IF N8
|
||||
BID_RAMD EQU 80H
|
||||
BID_RAMM EQU 9BH
|
||||
BID_SYS EQU 9CH
|
||||
BID_HB EQU 9DH
|
||||
BID_USR EQU 9EH
|
||||
BID_COM EQU 9FH
|
||||
ENDIF
|
||||
;
|
||||
IF INTPXY
|
||||
MEMTOP EQU 0FFE0H - 1 ; Start of HBIOS 32 byte control block
|
||||
ELSE
|
||||
MEMTOP EQU HBLOC - 1 ; Start of HBIOS 512 byte proxy
|
||||
ENDIF
|
||||
|
||||
IF INTPXY
|
||||
HB_EI MACRO
|
||||
ENDM
|
||||
HB_DI MACRO
|
||||
ENDM
|
||||
ELSE
|
||||
HB_EI MACRO
|
||||
EI
|
||||
ENDM
|
||||
HB_DI MACRO
|
||||
DI
|
||||
ENDM
|
||||
ENDIF
|
||||
|
||||
97
Source/BPBIOS/romwbw-s.lib
Normal file
97
Source/BPBIOS/romwbw-s.lib
Normal file
@@ -0,0 +1,97 @@
|
||||
;:::::::::::::::::::::::::::::::::::::::::::::::**********************
|
||||
; B/P BIOS Configuration and Equate File. ** System Dependant **
|
||||
; - Retro-Brew Processors W/ RomWBW HBIOS - **********************
|
||||
; HBIOS specific customizations
|
||||
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
||||
; BIOS Configuration Equates and Macros
|
||||
;
|
||||
; NOTE: Must make sure settings below match hardware and
|
||||
; HBIOS configuration.
|
||||
;
|
||||
HBIOS EQU YES ; Use HBIOS functions
|
||||
HBLOC EQU 0FE00H ; Location of HBIOS proxy (used if not INTPXY)
|
||||
;
|
||||
; Set exactly one of the following to YES to specify platform
|
||||
;
|
||||
SBC EQU YES
|
||||
ZETA EQU NO
|
||||
ZETA2 EQU NO
|
||||
N8 EQU NO
|
||||
MK4 EQU NO
|
||||
;
|
||||
; SIMH SUPPORT - only used with SBC
|
||||
IF SBC
|
||||
SIMH EQU YES ; Set yes if running on SimH
|
||||
ELSE
|
||||
SIMH EQU NO
|
||||
ENDIF
|
||||
;
|
||||
; Set to YES FOR BIOS clock support else NO If no clock
|
||||
;
|
||||
HBCLK EQU YES ; HBIOS clock driver
|
||||
;
|
||||
; Set HB_IODEV to appropriate console device
|
||||
;
|
||||
HB_IODEV EQU 0 ; Assume we want to use first HBIOS serial device
|
||||
; Change if using PROPIO etc.
|
||||
;
|
||||
; Set HB_HDDEV to appropriate hard disk driver
|
||||
;
|
||||
HB_HDDEV EQU 2 ; Assumes disk device #2 is first hard disk device
|
||||
;
|
||||
; Set HB_MDDEV to appropriate memory disk driver
|
||||
;
|
||||
HB_MDDEV EQU 0 ; Assumes disk device #0 is ROM disk device
|
||||
;
|
||||
; Floppy disk support
|
||||
;
|
||||
IF MK4 or SIMH
|
||||
DRV_O SET NO ; YES if system has flopy drives
|
||||
DRV_P SET NO ; YES if system has flopy drives
|
||||
ENDIF ;MK4 or SIMH
|
||||
;
|
||||
; RAM/ROM disk sizes expressed as count of 2K blocks
|
||||
;
|
||||
HB_RAMBLKS EQU 192 ; 512K - 128K reserved / 2K per block
|
||||
HB_ROMBLKS EQU 192 ; 512K - 128K reserved / 2K per block
|
||||
;HB_ROMBLKS EQU 448 ; 1024K - 128K reserved / 2K per block
|
||||
;
|
||||
; Layout of RAM banks
|
||||
;
|
||||
IF SBC OR ZETA OR ZETA2 OR MK4
|
||||
BID_RAMD EQU 80H
|
||||
BID_RAMM EQU 8BH
|
||||
BID_SYS EQU 8CH
|
||||
BID_HB EQU 8DH
|
||||
BID_USR EQU 8EH
|
||||
BID_COM EQU 8FH
|
||||
ENDIF
|
||||
IF N8
|
||||
BID_RAMD EQU 80H
|
||||
BID_RAMM EQU 9BH
|
||||
BID_SYS EQU 9CH
|
||||
BID_HB EQU 9DH
|
||||
BID_USR EQU 9EH
|
||||
BID_COM EQU 9FH
|
||||
ENDIF
|
||||
;
|
||||
IF INTPXY
|
||||
MEMTOP EQU 0FFE0H - 1 ; Start of HBIOS 32 byte control block
|
||||
ELSE
|
||||
MEMTOP EQU HBLOC - 1 ; Start of HBIOS 512 byte proxy
|
||||
ENDIF
|
||||
|
||||
IF INTPXY
|
||||
HB_EI MACRO
|
||||
ENDM
|
||||
HB_DI MACRO
|
||||
ENDM
|
||||
ELSE
|
||||
HB_EI MACRO
|
||||
EI
|
||||
ENDM
|
||||
HB_DI MACRO
|
||||
DI
|
||||
ENDM
|
||||
ENDIF
|
||||
|
||||
152
Source/BPBIOS/z3basefn.lib
Normal file
152
Source/BPBIOS/z3basefn.lib
Normal file
@@ -0,0 +1,152 @@
|
||||
; z3base.fp -- B/P Bios System Z3 Definition File for a fully
|
||||
; banked system with 32 byte external HBIOS proxy and
|
||||
; internal proxy.
|
||||
|
||||
; This file is adapted from the basic Z3BASE.LIB configuration file used for
|
||||
; most ZCPR33 systems. It has added the new definitions for the Resident
|
||||
; User Space defined in B/P Bios descriptions.
|
||||
;=========================================================================
|
||||
;== NOTE: The Starting Address of the User Space marks the lower ==
|
||||
;== base of memory and MUST be entered. B/P Bios Utilities use ==
|
||||
;== this address to locate many portions of the operating system. ==
|
||||
;=========================================================================
|
||||
; To change your systems definition, first sketch out the memory map in the
|
||||
; comment table, then set the equates to reflect the memory map, doing any
|
||||
; required calculations for element sizes and required spaces. As an
|
||||
; alternative, just leave this file alone and configure everything with
|
||||
; the utilities provided. For example reserve top 1k for HBIOS and no IOP.
|
||||
|
||||
; FFE0 - FFFF 32 Bytes HBIOS RESERVED AREA (mini proxy)
|
||||
; FFB0 - FFDF 48 Bytes ZCPR3 External Stack (must be 48 bytes)
|
||||
; FE00 - FFAF 432 Bytes Named Directory Buffer
|
||||
; FD00 - FDFF 256 Bytes Multiple Command Line Buffer
|
||||
; FC00 - FCFF 256 Bytes Environment Descriptor
|
||||
; Bytes 00H-7FH: Z3 Parameters
|
||||
; Bytes 80H-FFH: Z3 TCAP
|
||||
; FBFF 1 Byte Wheel byte
|
||||
; FBF4 - FAFE 11 Bytes Path (5 elements)
|
||||
; FBD0 - FAF3 36 Bytes ZCPR3 External FCB
|
||||
; FB80 - FACF 80 Bytes ZCPR3 Message Buffers
|
||||
; FB00 - FA7F 128 Bytes ZCPR3 Shell Stack
|
||||
; F900 - FAFF 512 Bytes Flow Command Package
|
||||
; F900 - F900 0 KBytes Resident Command Package
|
||||
; F900 - F900 0 KBytes IO Package - no IOP
|
||||
; F900 - F900 0 KBytes Resident User Space (no clk drvr needed)
|
||||
|
||||
; The remainder is for the Operating System. Exact sizes vary depending
|
||||
; primarily on the Number and sizes of Hard Drive Partitions, typically:
|
||||
|
||||
; EF00 - F8FF 2.75 KBytes B/P BIOS (unbanked version)
|
||||
; E580 - EEFF 3.375 KBytes ZSDOS 2.0 BDOS
|
||||
; DD80 - E47F 2 KBytes ZCPR 4.1 Command Processor
|
||||
; 0100 - C5FF ~50 KBytes Transient Program Area
|
||||
; 0000 - 00FF 256 Bytes Standard CP/M Buffers
|
||||
;========================================================================
|
||||
|
||||
FALSE EQU 0
|
||||
TRUE EQU NOT FALSE
|
||||
|
||||
YES EQU TRUE
|
||||
NO EQU FALSE
|
||||
|
||||
; The External Stack is placed in the very top position in memory. It is
|
||||
; mandatory for B/P Bios and ZCPR 3.3.
|
||||
|
||||
; FFB0 - FFDF 48 Bytes ZCPR3 External Stack (must be 48 bytes)
|
||||
;EXTSTK EQU 0FBD0H ; ZCPR3 External Stack
|
||||
EXTSTK EQU MEMTOP+1-48 ; ZCPR3 External Stack
|
||||
EXTSTKS EQU YES
|
||||
|
||||
; ZCPR3 Named Directory Buffer definition.
|
||||
; FE00 - FFAF 432 Bytes Named Directory Buffer -23 names
|
||||
Z3NDIRS EQU 23 ; Number of Named Directory Elements
|
||||
; F800 - F8FF 256 Bytes Named Directory Buffer - 14 NAMES
|
||||
NDIRSZ EQU Z3NDIRS * 18 + 1
|
||||
; (NDIR Size = Z3NDIRS * 18 + 1 = 433 Bytes)
|
||||
Z3NDIR EQU ((EXTSTK-NDIRSZ)/256)*256 ; Start of Named Directory Buffer
|
||||
|
||||
; The Multiple Command Line Buffer is placed in the Top Page of Memory to
|
||||
; place it above the Environment. It is mandatory for ZCPR 3.3.
|
||||
; FD00 - FDFF 256 Bytes
|
||||
;Z3CL EQU 0FB00H ; ZCPR3 Command Line Buffer
|
||||
;Z3CLS EQU 208-5 ; Size of Command Line Buffer-5
|
||||
Z3CLS EQU 256-5 ; Size of Command Line Buffer-5
|
||||
Z3CL EQU Z3NDIR-Z3CLS-5 ; ZCPR3 Command Line Buffer
|
||||
|
||||
; The ZCPR3 External Environment Descriptor is mandatory B/P Bios & ZCPR 3.3.
|
||||
; The Environment Descriptor MUST begin on an even Page Boundary (xx00H).
|
||||
|
||||
; FC00 - FCFF 256 Bytes Environment Descriptor
|
||||
Z3ENVS EQU 2 ; Size of Env Descriptor in 128-Byte Blks
|
||||
Z3ENV EQU (Z3CL-Z3ENVS*128) and 0FF00H
|
||||
|
||||
; The ZCPR3 Wheel Byte is mandatory for ZCPR 3.3.
|
||||
|
||||
; FBFF 1 Byte Wheel byte
|
||||
Z3WHLS EQU YES
|
||||
Z3WHL EQU Z3ENV-1 ; Wheel Byte Address
|
||||
|
||||
; The Path is mandatory for ZCPR 3.3.
|
||||
|
||||
; FBF4 - FBFE 11 Bytes Path (5 elements)
|
||||
EXPATHS EQU 5 ; (Path Size = EXPATHS*2 + 1 = 11 bytes)
|
||||
; This defines 5 2-byte Path Elements
|
||||
EXPATH EQU Z3WHL-EXPATHS*2-1 ; External Path starting Address
|
||||
|
||||
; The ZCPR3 External FCB is mandatory for ZCPR 3.3.
|
||||
|
||||
; FBD0 - FBF3 36 Bytes ZCPR3 External FCB
|
||||
EXTFCBS EQU YES
|
||||
EXFCBSZ EQU 36
|
||||
EXTFCB EQU EXPATH-EXFCBSZ ; 36-Byte ZCPR3 External FCB
|
||||
|
||||
; The ZCPR3 Message Buffers are mandatory for ZCPR 3.3.
|
||||
|
||||
; FB80 - FBCF 80 Bytes ZCPR3 Message Buffers
|
||||
Z3MSGS EQU YES
|
||||
Z3MSGSZ EQU 80 ; size of buffer
|
||||
Z3MSG EQU EXTFCB-Z3MSGSZ ; 80-Byte ZCPR3 Message Buffer
|
||||
|
||||
; Shell Stack definition. Set SHSTKS to 0 to eliminate Shell Stack
|
||||
|
||||
; FB00 - FB7F 128 Bytes ZCPR3 Shell Stack
|
||||
SHSTKS EQU 4 ; Number of SHSIZE-Byte Shell Stack entries
|
||||
SHSIZE EQU 32 ; (Stack Size = SHSTKS * SHSIZE = 128 Bytes)
|
||||
SHSTK EQU Z3MSG-SHSTKS*SHSIZE ; Shell Stack Starting Address
|
||||
|
||||
; Flow Command Package definition. Set FCPS to 0 to eliminate FCP
|
||||
|
||||
; F900 - FAFF 512 Bytes Flow Command Package
|
||||
FCPS EQU 4 ; (FCP Size = 128 * FCPS = 512 Bytes)
|
||||
;FCPS EQU 0 ; (FCP Size = 128 * FCPS = 512 Bytes)
|
||||
FCP EQU SHSTK-FCPS*128 ; Start of Flow Command Package
|
||||
|
||||
; Resident Command Processor Definition. Set RCPS to 0 to eliminate RCP
|
||||
|
||||
; F900 - F900 0 KBytes Resident Command Package
|
||||
;RCPS EQU 16 ; (RCP Size = 128 * RCPS = 2 kBytes)
|
||||
RCPS EQU 0 ; (RCP Size = 128 * RCPS = 2 kBytes)
|
||||
RCP EQU FCP-RCPS*128 ; Start of Resident Command Processor
|
||||
|
||||
; IO Package definition. Set IOPS to 0 to eliminate IOP
|
||||
|
||||
;IOP EQU 0EC00H ; Start of IO Package
|
||||
; F900 - F900 0 KBytes IO Package
|
||||
IOPS DEFL 0 ; (IOP Size = 128 * IOPS = 0 kBytes)
|
||||
;IOPS DEFL 12 ; (IOP Size = 128 * IOPS = 1.5 kBytes)
|
||||
;IOPS DEFL 10 ; (IOP Size = 128 * IOPS = 1.25 kBytes)
|
||||
;OPS DEFL 3 ; (IOP Size = 128 * IOPS = 1.25 kBytes)
|
||||
IOP EQU RCP-IOPS*128 ; Start of IO Package
|
||||
|
||||
;=========================================================================
|
||||
; Resident User Space Definition. Set USPCS to 0 to eliminate USPC.
|
||||
; The USPC Value marks the Lower Limit of Reserved Common High Memory and
|
||||
; MUST BE PRESENT!
|
||||
|
||||
USPCS EQU 0 ; (USPC Size = 128 * USPCS = 0 kBytes)
|
||||
;USPCS EQU 6 ; (USPC Size = 128 * USPCS = 0.75 kBytes)
|
||||
; F900 - F900 0.75 KBytes Resident User Space
|
||||
USPC EQU IOP-USPCS*128 ; Start of Resident User Space (MANDATORY)
|
||||
|
||||
;--- End of Z3BASE.LIB ---
|
||||
|
||||
148
Source/BPBIOS/z3baseft.lib
Normal file
148
Source/BPBIOS/z3baseft.lib
Normal file
@@ -0,0 +1,148 @@
|
||||
; z3base.fp -- fully banked B/P Bios System Z3 Definition File for HBIOS
|
||||
; with 512 byte external proxy (no internal proxy).
|
||||
|
||||
; This file is adapted from the basic Z3BASE.LIB configuration file used for
|
||||
; most ZCPR33 systems. It has added the new definitions for the Resident
|
||||
; User Space defined in B/P Bios descriptions and modified for an HBIOS
|
||||
; implementation with a full external HBIOS proxy (i.e. proxy not internal
|
||||
; to BPBIOS).
|
||||
;
|
||||
;=========================================================================
|
||||
;== NOTE: The Starting Address of the User Space marks the lower ==
|
||||
;== base of memory and MUST be entered. B/P Bios Utilities use ==
|
||||
;== this address to locate many portions of the operating system. ==
|
||||
;=========================================================================
|
||||
; To change your systems definition, first sketch out the memory map in the
|
||||
; comment table, then set the equates to reflect the memory map, doing any
|
||||
; required calculations for element sizes and required spaces. As an
|
||||
; alternative, just leave this file alone and configure everything with
|
||||
; the utilities provided.
|
||||
|
||||
; FE00 - FFFF 512 Bytes HBIOS proxy AREA in the top of ram
|
||||
; FD00 - FDFF 256 Bytes Multiple Command Line Buffer
|
||||
; FC00 - FCFF 256 Bytes Environment Descriptor
|
||||
; Bytes 00H-7FH: Z3 Parameters
|
||||
; Bytes 80H-FFH: Z3 TCAP
|
||||
; FBFF 1 Byte Wheel byte
|
||||
; FBF4 - FBFE 11 Bytes Path (5 elements)
|
||||
; FBD0 - FBF3 36 Bytes ZCPR3 External FCB
|
||||
; FB80 - FBCF 80 Bytes ZCPR3 Message Buffers
|
||||
; FB00 - FB7F 128 Bytes ZCPR3 Shell Stack (4x32)
|
||||
; FAD0 - FAFF 48 Bytes ZCPR3 External Stack (must be 48 bytes)
|
||||
; F900 - FACF 464 Bytes Named Directory Buffer (25 entries)
|
||||
; F700 - F9FF 512 Bytes Flow Command Package
|
||||
; F700 - F700 0 KBytes Resident Command Package
|
||||
; F700 - F700 0 KBytes IO Package - no IOP
|
||||
; F700 - F700 0 Bytes Resident User Space (no clock driver needed)
|
||||
|
||||
; The remainder is for the Operating System. Exact sizes vary depending
|
||||
; primarily on the Number and sizes of Hard Drive Partitions, typically:
|
||||
|
||||
; EC00 - F6FF 22 recs B/P BIOS (unbanked version)
|
||||
; E280 - EBFF 19 recs ZSDOS 2.0 BDOS
|
||||
; DA80 - E27F 2 KBytes ZCPR 4.1 Command Processor
|
||||
; 0100 - C5FF ~50 KBytes Transient Program Area
|
||||
; 0000 - 00FF 256 Bytes Standard CP/M Buffers
|
||||
;========================================================================
|
||||
|
||||
FALSE EQU 0
|
||||
TRUE EQU NOT FALSE
|
||||
|
||||
YES EQU TRUE
|
||||
NO EQU FALSE
|
||||
|
||||
; The Multiple Command Line Buffer is mandatory for ZCPR 3.3. 3.4 & 4.1.
|
||||
; FD00 - FDCF 208 Bytes
|
||||
;Z3CL EQU 0FB00H ; ZCPR3 Command Line Buffer
|
||||
Z3CLS EQU 256-5 ; Size of Command Line Buffer-5
|
||||
Z3CL EQU MEMTOP+1-Z3CLS-5 ; ZCPR3 Command Line Buffer
|
||||
|
||||
; The ZCPR3 External Environment Descriptor is mandatory B/P Bios & ZCPR 3.3.
|
||||
; The Environment Descriptor MUST begin on an even Page Boundary (xx00H).
|
||||
; FC00 - FCFF 256 Bytes Environment Descriptor
|
||||
Z3ENVS EQU 2 ; Size of Env Descriptor in 128-Byte Blks
|
||||
Z3ENV EQU (Z3CL-Z3ENVS*128) and 0FF00H
|
||||
|
||||
; The ZCPR3 Wheel Byte is mandatory for ZCPR 3.3.
|
||||
|
||||
; FBFF 1 Byte Wheel byte
|
||||
Z3WHLS EQU YES
|
||||
Z3WHL EQU Z3ENV-1 ; Wheel Byte Address
|
||||
|
||||
; The Path is mandatory for ZCPR 3.3.
|
||||
|
||||
; FBF4 - FBFE 11 Bytes Path (5 elements)
|
||||
EXPATHS EQU 5 ; (Path Size = EXPATHS*2 + 1 = 11 bytes)
|
||||
; This defines 5 2-byte Path Elements
|
||||
EXPATH EQU Z3WHL-EXPATHS*2-1 ; External Path starting Address
|
||||
|
||||
; The ZCPR3 External FCB is mandatory for ZCPR 3.3.
|
||||
|
||||
; FBD0 - FBF3 36 Bytes ZCPR3 External FCB
|
||||
EXTFCBS EQU YES
|
||||
EXFCBSZ EQU 36
|
||||
EXTFCB EQU EXPATH-EXFCBSZ ; 36-Byte ZCPR3 External FCB
|
||||
|
||||
; The ZCPR3 Message Buffers are mandatory for ZCPR 3.3.
|
||||
|
||||
; FB80 - FBCF 80 Bytes ZCPR3 Message Buffers
|
||||
Z3MSGS EQU YES
|
||||
Z3MSGSZ EQU 80 ; size of buffer
|
||||
Z3MSG EQU EXTFCB-Z3MSGSZ ; 80-Byte ZCPR3 Message Buffer
|
||||
|
||||
; Shell Stack definition. Set SHSTKS to 0 to eliminate Shell Stack
|
||||
|
||||
; FB00 - FB7F 128 Bytes ZCPR3 Shell Stack
|
||||
SHSTKS EQU 4 ; Number of SHSIZE-Byte Shell Stack entries
|
||||
SHSIZE EQU 32 ; (Stack Size = SHSTKS * SHSIZE = 128 Bytes)
|
||||
SHSTK EQU Z3MSG-SHSTKS*SHSIZE ; Shell Stack Starting Address
|
||||
|
||||
; The External Stack is mandatory for B/P Bios and ZCPR 3.3.
|
||||
; FAD0 - FAFF 48 Bytes ZCPR3 External Stack (must be 48 bytes)
|
||||
;EXTSTK EQU 0FAD0H ; ZCPR3 External Stack
|
||||
EXTSTK EQU SHSTK-48 ; ZCPR3 External Stack
|
||||
EXTSTKS EQU YES
|
||||
|
||||
; ZCPR3 Named Directory Buffer definition. Set Z3NDIRS to 0 to eliminate
|
||||
; the named directory buffer.
|
||||
; F900 - FACF 464 Bytes ; Named Directory Buffer - 25 NAMES
|
||||
Z3NDIRS EQU 25 ; Number of Named Directory Elements
|
||||
NDIRSZ EQU Z3NDIRS * 18 + 1
|
||||
; (NDIR Size = Z3NDIRS * 18 + 1 = 451 Bytes)
|
||||
Z3NDIR EQU SHSTK-(NDIRSZ/256+1)*256 ; Start of Named Directory Buffer
|
||||
|
||||
; Flow Command Package definition. Set FCPS to 0 to eliminate FCP
|
||||
|
||||
; F700 - F8FF 512 Bytes Flow Command Package
|
||||
FCPS EQU 4 ; (FCP Size = 128 * FCPS = 512 Bytes)
|
||||
;FCPS EQU 0 ; (FCP Size = 128 * FCPS = 0 Bytes)
|
||||
FCP EQU Z3NDIR-FCPS*128 ; Start of Flow Command Package
|
||||
|
||||
; Resident Command Processor Definition. Set RCPS to 0 to eliminate RCP
|
||||
|
||||
; F700 - F700 0 KBytes Resident Command Package
|
||||
;RCPS EQU 16 ; (RCP Size = 128 * RCPS = 2 kBytes)
|
||||
RCPS EQU 0 ; (RCP Size = 128 * RCPS = 0 kBytes)
|
||||
RCP EQU FCP-RCPS*128 ; Start of Resident Command Processor
|
||||
|
||||
; IO Package definition. Set IOPS to 0 which eliminates IOP
|
||||
|
||||
;IOP EQU 0EC00H ; Start of IO Package
|
||||
; F700 - F700 0 KBytes IO Package
|
||||
IOPS DEFL 0 ; (IOP Size = 128 * IOPS = 0 kBytes)
|
||||
;IOPS DEFL 12 ; (IOP Size = 128 * IOPS = 1.5 kBytes)
|
||||
;IOPS DEFL 10 ; (IOP Size = 128 * IOPS = 1.25 kBytes)
|
||||
IOP EQU RCP-IOPS*128 ; Start of IO Package
|
||||
|
||||
;=========================================================================
|
||||
; Resident User Space Definition. Set USPCS to 0 to eliminate USPC.
|
||||
; The USPC Value marks the Lower Limit of Reserved Common High Memory and
|
||||
; MUST BE PRESENT!
|
||||
|
||||
USPCS EQU 0 ; (USPC Size = 128 * USPCS = 0 kBytes)
|
||||
;USPCS EQU 6 ; (USPC Size = 128 * USPCS = 0.75 kBytes)
|
||||
; F700 - F700 0 KBytes Resident User Space
|
||||
USPC EQU IOP-USPCS*128 ; Start of Resident User Space (MANDATORY)
|
||||
|
||||
;--- End of Z3BASE.LIB ---
|
||||
|
||||
Reference in New Issue
Block a user