Update Doc

Doc/ChangeLog.txt

@@ -32,7 +32,8 @@ Version 3.5
 - WBW: Substantial customization of NZ-COM disk image
 - WBW: Refactor build post-processing (ZRC, ZZRCC, etc.)
 - MAP: Improved section Real Time Clock in User Guide document
-- WBW: Support for Hitachi HD44780-based LCD display
+- WBW: Support for Hitachi HD44780-based LCD display
+- DRJ: Added support for Genesis STD Bus Z180 platform
 
 Version 3.4
 -----------

ReadMe.md

@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.5 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-03 Sep 2024
+04 Sep 2024
 
 # Overview
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-03 Sep 2024
+04 Sep 2024
 
 
 

Source/Doc/UserGuide.md

@@ -262,6 +262,7 @@ is discussed in [Customizing RomWBW].
 | [EP Mini-ITX Z180]^11^                                      | RCBus?  | EPITX_std.rom                | 115200        |
 | [NABU w/ RomWBW Option Board]^10^                           | NABU    | NABU_std.rom                 | 115200        |
 | [S100 FPGA Z80]^9^                                          | S100    | FZ80_std.rom                 | 9600          |
+| [Genesis STD Z180]^12^                                      | STD     | GMZ180_std.rom               | 115200        |
 
 | ^1^Designed by Andrew Lynch
 | ^2^Designed by Sergey Kiselev
@@ -274,6 +275,7 @@ is discussed in [Customizing RomWBW].
 | ^9^Designed by John Monahan
 | ^10^Designed by Les Bird
 | ^11^Designed by Alan Cox
+| ^12^Designed by Doug Jackson
 
 RCBus refers to Spencer Owen's RC2014 bus specification and derivatives
 including RC26, RC40, RC80, and BP80.
@@ -5382,7 +5384,7 @@ the RomWBW HBIOS configuration.
 - CH: IO=60
 - CHUSB: IO=62
 - CHUSB: IO=60
-S- MD: TYPE=RAM
+- MD: TYPE=RAM
 - MD: TYPE=ROM
 - FD: MODE=RCWDC, IO=80, DRIVE 0, TYPE=3.5" HD
 - FD: MODE=RCWDC, IO=80, DRIVE 1, TYPE=3.5" HD
@@ -6097,6 +6099,36 @@ SD: MODE=FZ80, IO=108, UNITS=2
 
 - Requires matching FPGA code
 
+### Genesis STD Z180
+
+#### ROM Image File:  GMZ180_std.rom
+
+|                   |               |
+|-------------------|---------------|
+| Default CPU Speed | 18.432 MHz    |
+| Interrupts        | Mode 2        |
+| System Timer      | Z180          |
+| Serial Default    | 115200 Baud   |
+| Memory Manager    | Z180          |
+| ROM Size          | 512 KB        |
+| RAM Size          | 512 KB        |
+
+##### Supported Hardware (see [Appendix B - Device Summary]):
+
+DSRTC: MODE=STD, IO=132
+INTRTC: ENABLED
+ASCI: IO=192, INTERRUPTS ENABLED
+ASCI: IO=193, INTERRUPTS ENABLED
+MD: TYPE=RAM
+MD: TYPE=ROM
+IDE: MODE=GIDE, IO=32, MASTER
+IDE: MODE=GIDE, IO=32, SLAVE
+SD: MODE=GM, IO=132, UNITS=1
+
+##### Notes:
+
+- CPU speed will be dynamically measured at startup if DSRTC is present
+
 ## Appendix B - Device Summary
 
 The table below briefly describes each of the possible devices that
@@ -6123,6 +6155,7 @@ may be discovered by RomWBW in your system.
 | EMM       | Disk     | Disk drive on Parallel Port emm interface (Zip Drive)  |
 | FD        | Disk     | 8272 or compatible Floppy Disk Controller              |
 | FP        | System   | Simple LED & Switch Front Panel                        |
+| FV        | Video    | S100 FPGA Z80 Onboard VGA/Keyboard                     |
 | GDC       | Video    | uPD7220 Video Display Controller                       |
 | HDSK      | Disk     | SIMH Simulator Hard Disk                               |
 | ICM       | DsKy     | ICM7218-based Display/Keypad on PPI                    |

Source/HBIOS/cfg_gmz180.asm

@@ -16,52 +16,52 @@
 #INCLUDE "hbios.inc"
 ;
 PLATFORM	.EQU	PLT_GMZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|GMZ180|DYNO|RCZ280|MBC|RPH|Z80RETRO|S100|DUO|HEATH|MON]
-CPUFAM	.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
+CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
-BATCOND	.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
 USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
 BOOT_DELAY	.EQU	0		; FIXED BOOT DELAY IN SECONDS PRIOR TO CONSOLE OUTPUT
-AUTOCON	.EQU	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+AUTOCON		.EQU	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
 ;
 CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
 CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
-CPUOSC	.EQU	18432000	; CPU OSC FREQ IN MHZ
-INTMODE	.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
 DEFSERCFG	.EQU	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
-RAMSIZE	.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
-ROMSIZE	.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE		.EQU	512		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
 APP_BNKS	.EQU	$FF		; BANKS TO RESERVE FOR APP USE ($FF FOR AUTO SIZING)
-MEMMGR	.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
-RAMBIAS	.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH|MON]
+RAMBIAS		.EQU	ROMSIZE		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
-MPGENA	.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
+MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
 ;
-Z180_BASE	      .EQU	$C0		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
-Z180_CLKDIV	      .EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_BASE	.EQU	$C0		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
+Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
 Z180_MEMWAIT	.EQU	0		; Z180: MEMORY WAIT STATES (0-3)
-Z180_IOWAIT	      .EQU	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
-Z180_TIMER	      .EQU	TRUE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
+Z180_IOWAIT	.EQU	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_TIMER	.EQU	TRUE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
 ;
 RTCIO		.EQU	$84		; RTC LATCH REGISTER ADR
 ;
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
-KIOBASE	.EQU	$80		; KIO BASE I/O ADDRESS
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
 ;
 CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
 CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
-CTCBASE	.EQU	$88		; CTC BASE I/O ADDRESS
+CTCBASE		.EQU	$88		; CTC BASE I/O ADDRESS
 CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
 ;
 PCFENABLE	.EQU	FALSE		; ENABLE PCF8584 I2C CONTROLLER
-PCFBASE	.EQU	$F0		; PCF8584 BASE I/O ADDRESS
+PCFBASE		.EQU	$F0		; PCF8584 BASE I/O ADDRESS
 ;
 EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
 ;
@@ -70,18 +70,18 @@ SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
 WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
 ;
 FPLED_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL LEDS
-FPLED_IO	      .EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
-FPLED_INV	      .EQU	FALSE		; FP: LED BITS ARE INVERTED
-FPLED_DSKACT      .EQU	FALSE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
-FPSW_ENABLE	      .EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
+FPLED_IO	.EQU	$00		; FP: PORT ADDRESS FOR FP LEDS
+FPLED_INV	.EQU	FALSE		; FP: LED BITS ARE INVERTED
+FPLED_DSKACT	.EQU	FALSE		; FP: ENABLES DISK I/O ACTIVITY ON FP LEDS
+FPSW_ENABLE	.EQU	FALSE		; FP: ENABLES FRONT PANEL SWITCHES
 FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
-FPSW_INV	      .EQU	FALSE		; FP: SWITCH BITS ARE INVERTED
+FPSW_INV	.EQU	FALSE		; FP: SWITCH BITS ARE INVERTED
 ;
-DIAGLVL	.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
+DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
-LEDMODE	.EQU	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
-LEDPORT	.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|SC|RTC|NABU]
+LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
 DSKYENABLE	.EQU	FALSE		; ENABLES DSKY FUNCTIONALITY
@@ -90,10 +90,10 @@ ICMENABLE	.EQU	FALSE		; ENABLES ORIGINAL DSKY ICM DRIVER (7218)
 ICMPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF ICM PPI
 PKDENABLE	.EQU	FALSE		; ENABLES DSKY NG PKD DRIVER (8259)
 PKDPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF PKD PPI
-PKDOSC	.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
+PKDOSC		.EQU	3000000		; OSCILLATOR FREQ FOR PKD (IN HZ)
 H8PENABLE	.EQU	FALSE		; ENABLES HEATH H8 FRONT PANEL
 LCDENABLE	.EQU	FALSE		; ENABLE LCD DISPLAY
-LCDBASE	.EQU	$DA		; BASE I/O ADDRESS OF LCD CONTROLLER
+LCDBASE		.EQU	$DA		; BASE I/O ADDRESS OF LCD CONTROLLER
 LCDDSKACT	.EQU	TRUE		; ENABLES DISK ACTIVITY ON LCD DISPLAY
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
@@ -122,16 +122,16 @@ INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
 ;
 RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
 ;
-HTIMENABLE	      .EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
 SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
 ;
 DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
-DS7RTCMODE	      .EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
 ;
 DS5RTCENABLE	.EQU	FALSE		; DS5RTC: ENABLE DS-1305 SPI CLOCK DRIVER (DS5RTC.ASM)
 ;
 SSERENABLE	.EQU	FALSE		; SSER: ENABLE SIMPLE SERIAL DRIVER (SSER.ASM)
-SSERCFG	.EQU	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
+SSERCFG		.EQU	SER_9600_8N1	; SSER: SERIAL LINE CONFIG
 SSERSTATUS	.EQU	$FF		; SSER: STATUS PORT
 SSERDATA	.EQU	$FF		; SSER: DATA PORT
 SSERIRDY	.EQU	%00000001	; SSER: INPUT READY BIT MASK
@@ -237,13 +237,13 @@ RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
 IDEENABLE	.EQU	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-IDECNT	.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
 IDE0MODE	.EQU	IDEMODE_GIDE	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
 IDE0BASE	.EQU	$20   		; IDE 0: IO BASE ADDRESS
 IDE0DATLO	.EQU	$20		; IDE 0: DATA LO PORT FOR 16-BIT I/O
 IDE0DATHI	.EQU	$28		; IDE 0: DATA HI PORT FOR 16-BIT I/O
 IDE0A8BIT	.EQU	TRUE		; IDE 0A (MASTER): 8 BIT XFER
-IDE0B8BIT	.EQU	TRUE   	; IDE 0B (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	TRUE		; IDE 0B (MASTER): 8 BIT XFER
 IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC|GIDE]
 IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
 IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
@@ -271,15 +271,15 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE	.EQU	SDMODE_GM	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
+SDMODE		.EQU	SDMODE_GM	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM]
 SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY
-SDTRACE	.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 SDMTSWAP	.EQU	FALSE		; SD: SWAP THE LOGICAL ORDER OF THE SPI PORTS OF THE MT011
 ;
 CHENABLE	.EQU	FALSE		; CH: ENABLE CH375/376 USB SUPPORT
-CHTRACE	.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+CHTRACE		.EQU	1		; CH: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHUSBTRACE	.EQU	1		; CHUSB: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHSDTRACE	.EQU	1		; CHSD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 CHCNT		.EQU	2		; CH: NUMBER OF BOARDS TO DETECT (1-2)
@@ -307,30 +307,30 @@ PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
 LPTENABLE	.EQU	FALSE		; LPT: ENABLE CENTRONICS PRINTER DRIVER (LPT.ASM)
-LPTMODE	.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
-LPTCNT	.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
+LPTMODE		.EQU	LPTMODE_MG014	; LPT: DRIVER MODE: LPTMODE_[NONE|SPP|MG014]
+LPTCNT		.EQU	1		; LPT: NUMBER OF CHIPS TO DETECT (1-2)
 LPTTRACE	.EQU	1		; LPT: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 LPT0BASE	.EQU	$18		; LPT 0: REGISTERS BASE ADR
 LPT1BASE	.EQU	$00		; LPT 1: REGISTERS BASE ADR
 ;
 PPAENABLE	.EQU	FALSE		; PPA: ENABLE PPA DISK DRIVER (PPA.ASM)
-PPACNT	.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
+PPACNT		.EQU	1		; PPA: NUMBER OF PPA DEVICES (1-2)
 PPATRACE	.EQU	1		; PPA: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-PPAMODE	.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
+PPAMODE		.EQU	PPAMODE_MG014	; PPA: DRIVER MODE: PPAMODE_[NONE|SPP|MG014]
 PPA0BASE	.EQU	LPT0BASE	; PPA 0: BASE I/O ADDRESS OF PPI FOR PPA
 PPA1BASE	.EQU	LPT1BASE	; PPA 1: BASE I/O ADDRESS OF PPI FOR PPA
 ;
 IMMENABLE	.EQU	FALSE		; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
-IMMCNT	.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
+IMMCNT		.EQU	1		; IMM: NUMBER OF IMM DEVICES (1-2)
 IMMTRACE	.EQU	1		; IMM: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-IMMMODE	.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
+IMMMODE		.EQU	IMMMODE_MG014	; IMM: DRIVER MODE: IMMMODE_[NONE|SPP|MG014]
 IMM0BASE	.EQU	LPT0BASE	; IMM 0: BASE I/O ADDRESS OF PPI FOR IMM
 IMM1BASE	.EQU	LPT1BASE	; IMM 1: BASE I/O ADDRESS OF PPI FOR IMM
 ;
 SYQENABLE	.EQU	FALSE		; SYQ: ENABLE IMM DISK DRIVER (SYQ.ASM)
-SYQCNT	.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
+SYQCNT		.EQU	1		; SYQ: NUMBER OF SYQ DEVICES (1-2)
 SYQTRACE	.EQU	1		; SYQ: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-SYQMODE	.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
+SYQMODE		.EQU	IMMMODE_MG014	; SYQ: DRIVER MODE: SYQMODE_[NONE|SPP|MG014]
 SYQ0BASE	.EQU	LPT0BASE	; SYQ 0: BASE I/O ADDRESS OF PPI FOR SYQ
 SYQ1BASE	.EQU	LPT1BASE	; SYQ 1: BASE I/O ADDRESS OF PPI FOR SYQ
 ;
@@ -338,10 +338,10 @@ PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 ;
-UFENABLE	      .EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
 SN76489ENABLE	.EQU	FALSE		; SN: ENABLE SN76489 SOUND DRIVER
-AUDIOTRACE	      .EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
 SN7CLK		.EQU	3579545		; SN: PSG CLOCK FREQ, ASSUME MSX STD
 SNMODE		.EQU	SNMODE_RC	; SN: DRIVER MODE: SNMODE_[NONE|RC|VGM]
 ;
@@ -349,9 +349,9 @@ AY38910ENABLE	.EQU	FALSE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	1789772		; AY: PSG CLOCK FREQ, ASSUME MSX STD
 AYMODE		.EQU	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]
 ;
-SPKENABLE	      .EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;
-DMAENABLE	      .EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
 DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
 DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC|DUO)
 ;