new modules for s100 build

branches/s100/Source/config_s100.asm

@@ -0,0 +1,111 @@
+;
+;==================================================================================================
+;   ROMWBW 2.X CONFIGURATION FOR N8 5/8/2012
+;==================================================================================================
+;
+; BUILD CONFIGURATION OPTIONS
+;
+CPUFREQ		.EQU	20		; IN MHZ, USED TO COMPUTE DELAY FACTORS
+;
+
+PLATFORM	.EQU	PLT_S100		; PLT_N8VEM, PLT_ZETA, PLT_N8, PLT_S100
+
+;
+DEFCON		.EQU	CIODEV_UART	; DEFAULT CONSOLE DEVICE (LOADER AND MONITOR): CIODEV_UART, CIODEV_VDU, DIODEV_PRPCON
+ALTCON		.EQU	DEFCON		; ALT CONSOLE DEVICE (USED WHEN CONFIG JUMPER SHORTED)
+DEFVDA		.EQU	VDADEV_N8V	; DEFAULT VDA (VDADEV_NONE, VDADEV_VDU, VDADEV_CVDU, VDADEV_7220, V\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
+DEFEMU		.EQU	EMUTYP_TTY	; DEFAULT EMULATION TYPE (EMUTYP_TTY, EMUTYP_ANSI, ...)
+;
+
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
+
+CLRRAMDISK	.EQU	CLR_AUTO	; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
+;
+DSKMAP		.EQU	DM_RAM		; DM_ROM, DM_RAM, DM_FD, DM_IDE, DM_PPIDE, DM_SD, DM_PRPSD, DM_PPPSD
+;
+DSKYENABLE	.EQU	FALSE		; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
+;
+UARTENABLE	.EQU	TRUE		; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
+UARTFIFO	.EQU	TRUE		; TRUE ENABLES UART FIFO (16550 ASSUMED, N8VEM AND ZETA ONLY)
+UARTAFC		.EQU	FALSE		; TRUE ENABLES AUTO FLOW CONTROL (YOUR TERMINAL/UART MUST SUPPORT RTS/CTS FLOW CONTROL!!!)
+;
+VDUENABLE	.EQU	FALSE		; TRUE FOR VDU BOARD SUPPORT
+CVDUENABLE	.EQU	FALSE		; TRUE FOR CVDU BOARD SUPPORT
+UPD7220ENABLE	.EQU	FALSE		; TRUE FOR uPD7220 BOARD SUPPORT
+N8VENABLE	.EQU	TRUE		; TRUE FOR N8 (TMS9918) VIDEO/KBD SUPPORT
+;
+DEFIOBYTE	.EQU	$00		; DEFAULT INITIAL VALUE FOR CP/M IOBYTE, $00=TTY, $01=CRT (MUST HAVE CRT HARDWARE)
+ALTIOBYTE	.EQU	DEFIOBYTE	; ALT INITIAL VALUE (USED WHEN CONFIG JUMPER SHORTED)
+WRTCACHE	.EQU	TRUE		; ENABLE WRITE CACHING IN CBIOS (DE)BLOCKING ALGORITHM
+DSKTRACE	.EQU	FALSE		; ENABLE TRACING OF CBIOS DISK FUNCTION CALLS
+;
+FDENABLE	.EQU	FALSE		; TRUE FOR FLOPPY SUPPORT
+FDMODE		.EQU	FDMODE_N8	; FDMODE_DIO, FDMODE_ZETA, FDMODE_DIDE, FDMODE_N8, FDMODE_DIO3
+FDTRACE		.EQU	1		; 0=SILENT, 1=FATAL ERRORS, 2=ALL ERRORS, 3=EVERYTHING (ONLY RELEVANT IF FDENABLE = TRUE)
+;; 																																														 
+FDMEDIA		.EQU	FDM144		; FDM720, FDM144, FDM360, FDM120 (ONLY RELEVANT IF FDENABLE = TRUE)
+FDMEDIAALT	.EQU	FDM720		; ALTERNATE MEDIA TO TRY, SAME CHOICES AS ABOVE (ONLY RELEVANT IF FDMAUTO = TRUE)
+FDMAUTO		.EQU	TRUE		; SELECT BETWEEN MEDIA OPTS ABOVE AUTOMATICALLY
+;
+IDEENABLE	.EQU	FALSE		; TRUE FOR IDE SUPPORT
+IDEMODE		.EQU	IDEMODE_DIO	; IDEMODE_DIO, IDEMODE_DIDE
+IDETRACE	.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
+IDE8BIT		.EQU	FALSE		; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
+IDECAPACITY	.EQU	64		; CAPACITY OF DEVICE (IN MB)
+;
+PPIDEENABLE	.EQU	FALSE		; TRUE FOR PPIDE SUPPORT (DO NOT COMBINE WITH DSKYENABLE)
+PPIDEMODE	.EQU	PPIDEMODE_STD	; PPIDEMODE_STD, PPIDEMODE_DIO3
+PPIDETRACE	.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPIDEENABLE = TRUE)
+PPIDE8BIT	.EQU	FALSE		; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
+PPIDECAPACITY	.EQU	64		; CAPACITY OF DEVICE (IN MB)
+PPIDESLOW	.EQU	FALSE		; ADD DELAYS TO HELP PROBLEMATIC HARDWARE (TRY THIS IF PPIDE IS UNRELIABLE)
+;
+SDENABLE	.EQU	FALSE		; TRUE FOR SD SUPPORT
+SDTRACE		.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
+SDCAPACITY	.EQU	64		; CAPACITY OF DEVICE (IN MB)
+SDCSIO		.EQU	TRUE		; TRUE IF USING THE CSIO PORT (N8 ONLY)
+SDCSIOFAST	.EQU	FALSE		; TRUE IF USING THE LOOKUP TABLE RATHER THAN SHIFTS AND ROTATES (N8 ONLY)
+PPISD		.EQU	FALSE		; TRUE IF USING PPISD MINI-BOARD (DO NOT COMBINE WITH PPIDE)
+;
+PRPENABLE	.EQU	FALSE		; TRUE FOR PROPIO SD SUPPORT (FOR N8VEM PROPIO ONLY!)
+PRPSDENABLE	.EQU	TRUE		; TRUE FOR PROPIO SD SUPPORT (FOR N8VEM PROPIO ONLY!)
+PRPSDTRACE	.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PRPSDENABLE = TRUE)
+PRPSDCAPACITY	.EQU	64		; CAPACITY OF DEVICE (IN MB)
+PRPCONENABLE	.EQU	TRUE		; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
+;
+PPPENABLE	.EQU	FALSE		; TRUE FOR PARPORTPROP SUPPORT
+PPPSDENABLE	.EQU	TRUE		; TRUE FOR PROPIO SD SUPPORT (FOR N8VEM PROPIO ONLY!)
+PPPSDTRACE	.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPPENABLE = TRUE)
+PPPSDCAPACITY	.EQU	64		; CAPACITY OF PPP SD DEVICE (IN MB)
+PPPCONENABLE	.EQU	TRUE		; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
+;
+HDSKENABLE	.EQU	FALSE		; TRUE FOR SIMH HDSK SUPPORT
+HDSKTRACE	.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
+HDSKCAPACITY	.EQU	64		; CAPACITY OF DEVICE (IN MB)
+;
+PPKENABLE	.EQU	TRUE		; TRUE FOR PARALLEL PORT KEYBOARD
+PPKTRACE	.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPKENABLE = TRUE)
+KBDENABLE	.EQU	FALSE		; TRUE FOR PS/2 KEYBOARD ON I8242
+KBDTRACE	.EQU	1		; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF KBDENABLE = TRUE)
+;
+TTYENABLE	.EQU	TRUE		; INCLUDE TTY EMULATION SUPPORT
+ANSIENABLE	.EQU	TRUE		; INCLUDE ANSI EMULATION SUPPORT
+;
+BOOTTYPE	.EQU	BT_MENU		; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
+BOOT_TIMEOUT	.EQU	20		; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
+BOOT_DEFAULT	.EQU	'R'		; SELECTION TO INVOKE AT TIMEOUT
+;
+
+BAUDRATE	.EQU	38400		; IN BPS: 1200, 9600, 38400, ..., 115200
+
+TERMTYPE	.EQU	TERM_ANSI	; TERM_TTY=0, TERM_ANSI=1, TERM_WYSE=2
+;
+;  Z180_CLKDIV	.EQU	1		; 0=XTAL/2, 1=XTAL/1
+;; Z180_MEMWAIT	.EQU	0		; MEMORY WAIT STATES TO INSERT (0-3)
+;; Z180_IOWAIT	.EQU	3		; IO WAIT STATES TO INSERT (0-3)
+;; Z180_CNTLB0	.EQU	20H		; SERIAL PORT 0 DIV, SEE Z180 CLOCKING DOCUMENT
+;; Z180_CNTLB1	.EQU	20H		; SERIAL PORT 1 DIV, SEE Z180 CLOCKING DOCUMENT
+
+;;;;;;;;;;;;;;;;;;;;;;;;
+; EOF - CONFG_S100.ASM ;
+;;;;;;;;;;;;;;;;;;;;;;;;

branches/s100/Source/s100cpu.inc

@@ -0,0 +1,6 @@
+; ~/RomWBW/branches/s100/Source/s100cpu.inc 1/17/2013 dwg - 
+
+; S100COMPUTERS.COM Z80 Master CPU Board Schema
+
+#DEFINE IC_Z80
+

branches/s100/Source/s100dide.inc

@@ -0,0 +1,10 @@
+; ~/RomWBW/branches/s100/Source/s100dide.inc 1/17/2013 dwg - 
+
+; S100COMPUTERS.COM Dual IDE Board Schema
+
+;#DEFINE IC_SCC_8530
+
+;#DEFINE IC_PPI_8255
+
+
+

branches/s100/Source/s100iob.inc

@@ -0,0 +1,9 @@
+; ~/RomWBW/branches/s100/Source/s100iob.inc 1/17/2013 dwg - 
+
+; S100COMPUTERS.COM Input Output Board Schema
+
+#DEFINE IC_SCC_8530
+
+#DEFINE IC_PPI_8255
+
+

branches/s100/Source/s100rrf.inc

@@ -0,0 +1,10 @@
+; ~/RomWBW/branches/s100/Source/s100rrf.inc 1/17/2013 dwg - 
+
+; S100COMPUTERS.COM Ram Rom Flash Board Schema
+
+;#DEFINE IC_SCC_8530
+
+;#DEFINE IC_PPI_8255
+
+
+

branches/s100/Source/std.asm

@@ -34,7 +34,8 @@ PLT_N8VEM	.EQU	1		; N8VEM ECB Z80 SBC
 PLT_ZETA	.EQU	2		; ZETA Z80 SBC
 PLT_N8		.EQU	3		; N8 (HOME COMPUTER) Z180 SBC
 PLT_S2I		.EQU	4		; SCSI2IDE
-;
+PLT_S100	.EQU	5		; S100COMPUTERS Z80 based system
+
 ; BOOT STYLE
 ;
 BT_MENU		.EQU	1		; WAIT FOR MENU SELECTION AT LOADER PROMPT
@@ -181,6 +182,33 @@ CP		.EQU	CP_ZCPR
 ;
 #INCLUDE "build.inc"			; INCLUDE USER CONFIG, ADD VARIANT, TIMESTAMP, & ROMSIZE
 ;
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Support for S100COMPUTERS.COM Hardware ;
+; Phase One Support - Minimum Board Set  ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+																																																																																													
+#IF (PLATFORM == PLT_S100)
+;
+#IFDEF S100_CPU
+#INCLUDE "S100CPU.INC"
+#ENDIF
+;
+#IFDEF S100_IOB
+#INCLUDE "S100IOB.INC"
+#ENDIF
+;
+#IFDEF S100_RRF
+#INCLUDE "S100RRF.INC"
+#ENDIF
+;
+#IFDEF S100_DIDE
+#INCLUDE "S100DIDE.INC"
+#ENDIF
+;
+#ENDIF
+
+
 #IF (PLATFORM != PLT_N8)
 ;
 ; N8VEM HARDWARE IO PORT ADDRESSES AND MEMORY LOCATIONS
@@ -494,6 +522,9 @@ CCPSIZ:		.EQU	00800H
 #IF (PLATFORM == PLT_S2I)
   #DEFINE 	PLATFORM_NAME	"SCSI2IDE"
 #ENDIF
+#IF (PLATFORM == PLT_S100)
+  #DEFINE	PLATFORM_NAME	"S100"
+#ENDIF
 ;
 #IF (DSKYENABLE)
   #DEFINE	DSKYLBL	", DSKY"