From ed53030de2b61df992f26597e4b877fe5fdb4427 Mon Sep 17 00:00:00 2001
From: Wayne Warthen <wwarthen@gmail.com>
Date: Sun, 10 Dec 2023 17:28:04 -0800
Subject: [PATCH] Extend IDE Reset Delay & Support Duodyne FDC

- The post-reset delay of both the IDE and PPIDE drivers has been extended.  The SD-IDE adapters need more time to initialize before being ready to behave as proper IDE devices.
- Added support for the FDC section of the Duodyne Disk-IO board.
---
 Source/Apps/FDU/fdu.asm  | 45 +++++++++++++++++++++++++++-------------
 Source/Apps/FDU/fdu.doc  | 29 +++++++++++++++++---------
 Source/HBIOS/cfg_duo.asm |  4 ++--
 Source/HBIOS/fd.asm      | 22 +++++++++++++++-----
 Source/HBIOS/ide.asm     |  4 ++--
 Source/HBIOS/ppide.asm   |  4 ++--
 Source/HBIOS/std.asm     |  3 ++-
 Source/ver.inc           |  2 +-
 Source/ver.lib           |  2 +-
 9 files changed, 77 insertions(+), 38 deletions(-)

diff --git a/Source/Apps/FDU/fdu.asm b/Source/Apps/FDU/fdu.asm
index 4a68735e..82e89aac 100644
--- a/Source/Apps/FDU/fdu.asm
+++ b/Source/Apps/FDU/fdu.asm
@@ -48,7 +48,8 @@
 ;   2020-04-29: v5.5	ADDED SUPPORT FOR ETCHED PIXELS FDC
 ;   2020-12-12: v5.6	UPDATED SMALLZ80 TO NEW I/O ADDRESSES
 ;   2021-03-24: v5.7    ADDED SOME SINGLE-SIDED FORMATS
-;   2021-07-26: v5.8	ADDED SUPPORT MBC FDC
+;   2021-07-26: v5.8	ADDED SUPPORT FOR NHYODYNE (MBC) FDC
+;   2023-12-10: v5.9	ADDED SUPPORT FOR DUODYNE (DUO) FDC
 ;			
 ;_______________________________________________________________________________
 ;
@@ -85,6 +86,7 @@ FDC_SMZ80	.EQU		8
 FDC_DYNO	.EQU		9
 FDC_EPFDC	.EQU		10
 FDC_MBC		.EQU		11
+FDC_DUO		.EQU		12
 ;
 ; FDC MODE
 ;
@@ -219,8 +221,8 @@ INIT5:
 	XOR	A
 	RET
 		
-STR_BANNER	.DB	"Floppy Disk Utility (FDU) v5.8, 26-Jul-2021$"
-STR_BANNER2	.DB	"Copyright (C) 2021, Wayne Warthen, GNU GPL v3","$"
+STR_BANNER	.DB	"Floppy Disk Utility (FDU) v5.9, 10-Dec-2023$"
+STR_BANNER2	.DB	"Copyright (C) 2023, Wayne Warthen, GNU GPL v3","$"
 STR_HBIOS	.DB	" [HBIOS]$"
 STR_UBIOS	.DB	" [UBIOS]$"
 ;
@@ -292,6 +294,7 @@ FDCTBL:	;	LABEL		CONFIG DATA
 	.DW	STR_DYNO,	CFG_DYNO
 	.DW	STR_EPFDC,	CFG_EPFDC
 	.DW	STR_MBC,	CFG_MBC
+	.DW	STR_DUO,	CFG_DUO
 FDCCNT	.EQU	($-FDCTBL)/4	; FD CONTROLLER COUNT
 ;
 ; FDC LABEL STRINGS
@@ -307,7 +310,8 @@ STR_RCWDC	.TEXT	"RC-WDC$"
 STR_SMZ80	.TEXT	"SMZ80$"
 STR_DYNO	.TEXT	"DYNO$"
 STR_EPFDC	.TEXT	"EPFDC$"
-STR_MBC		.TEXT	"MBC$"
+STR_MBC		.TEXT	"NHYODYNE$"
+STR_DUO		.TEXT	"DUODYNE$"
 ;
 ; FDC CONFIGURATION BLOCKS
 ;
@@ -448,7 +452,18 @@ CFG_MBC:
 	.DB	035H	; CONFIGURATION CONTROL REGISTER
 	.DB	036H	; DACK (WHEN READ)
 	.DB	037H	; TERMINAL COUNT (W/ DACK)
-	.DB	0FFH	; NOT USED BY ZETA SBC V2
+	.DB	0FFH	; NOT USED
+	.DB	_PCAT	; MODE=
+;
+CFG_DUO:
+	.DB	080H	; FDC MAIN STATUS REGISTER
+	.DB	081H	; FDC DATA PORT
+	.DB	0FFH	; DATA INPUT REGISTER
+	.DB	086H	; DIGITAL OUTPUT REGISTER (WHEN WRITTEN)
+	.DB	085H	; CONFIGURATION CONTROL REGISTER
+	.DB	086H	; DACK (WHEN READ)
+	.DB	087H	; TERMINAL COUNT (W/ DACK)
+	.DB	0FFH	; NOT USED
 	.DB	_PCAT	; MODE=
 ;
 FDCID	.DB	0			; FDC IDENTIFIER (0 INDEXED)
@@ -470,7 +485,8 @@ FSS_MENU:
 	.TEXT	"  (I) SmallZ80 Expansion\r\n"
 	.TEXT	"  (J) Dyno-Card FDC, D1030\r\n"
 	.TEXT	"  (K) RCBus EPFDC\r\n"
-	.TEXT	"  (L) Multi-Board Computer FDC\r\n"
+	.TEXT	"  (L) Nhyodyne FDC\r\n"
+	.TEXT	"  (M) Duodyne FDC\r\n"
 	.TEXT	"  (X) Exit\r\n"
 	.TEXT	"=== OPTION ===> $\r\n"
 ;	
@@ -1561,6 +1577,7 @@ MD_MAP:
 		.DB	%00000001	; DYNO	POLL
 		.DB	%00000001	; EPFDC	POLL
 		.DB	%00000001	; MBC	POLL
+		.DB	%00000001	; DUO	POLL
 ;
 ; MEDIA DESCRIPTION BLOCK
 ;
@@ -2021,7 +2038,7 @@ FM_DRAW0B:	; ZETA, DIO3
 	LD	A,(FST_DOR)
 	AND	00000010B
 	JR	FM_DRAW1
-FM_DRAW0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FM_DRAW0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,(FST_DOR)
 	AND	11110000B
 	JR	FM_DRAW1
@@ -2174,7 +2191,7 @@ FM_MOTOR0B:	; ZETA, DIO3
 	LD	A,(FST_DOR)
 	AND	00000010B
 	JR	FM_MOTOR1
-FM_MOTOR0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FM_MOTOR0C:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,(FST_DOR)
 	AND	11110000B
 	JR	FM_MOTOR1
@@ -2913,7 +2930,7 @@ FC_INIT1:	; DIO
 FC_INIT2:	; ZETA, DIO3
 	LD	A,(FCD_DORB)
 	JR	FC_INIT5
-FC_INIT3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_INIT3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,(FCD_DORC)
 	JR	FC_INIT5
 FC_INIT4:	; WDSMC
@@ -2957,7 +2974,7 @@ FC_RESETFDC1:	; ZETA, DIO3, RCSMC
 	POP	AF
 	OUT	(C),A
 	JR	FC_RESETFDC3
-FC_RESETFDC2:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_RESETFDC2:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	A,0
 	OUT	(C),A
 	LD	A,(FST_DOR)
@@ -2984,7 +3001,7 @@ FC_PULSETC:
 	;RES	0,A
 	;OUT	(C),A
 	;JR	FC_PULSETC2
-;FC_PULSETC1:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+;FC_PULSETC1:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	;LD	C,(IY+CFG_TC)
 	;IN	A,(C)
 	;JR	FC_PULSETC2
@@ -3016,7 +3033,7 @@ FC_MOTORON2:	; ZETA, DIO3
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	SET	1,(HL)
 	JR	FC_MOTORON5
-FC_MOTORON3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_MOTORON3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	LD	A,(HL)			; START WITH CURRENT DOR
 	AND	11111100B		; GET RID OF ANY ACTIVE DS BITS
@@ -3080,7 +3097,7 @@ FC_MOTOROFF2:	; ZETA, DIO3
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	RES	1,(HL)
 	JR	FC_MOTOROFF5
-FC_MOTOROFF3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC
+FC_MOTOROFF3:	; DIDE, N8, ZETA2, RCWDC, SMZ80, DYNO, EPFDC, MBC, DUO
 	LD	HL,FST_DOR		; POINT TO FDC_DOR
 	LD	A,DORC_INIT
 	LD	(HL),A
@@ -3950,7 +3967,7 @@ DORB_BR500	.EQU	10100000B	; 500KBPS
 ;
 DORB_INIT	.EQU	DORB_BR250
 ;
-; *** DIDE/N8/ZETA2/RCWDC/SMZ80/DYNO/EPFDC/MBC ***
+; *** DIDE/N8/ZETA2/RCWDC/SMZ80/DYNO/EPFDC/MBC/DUO ***
 ;
 DORC_INIT	.EQU	00001100B	; SOFT RESET INACTIVE, DMA ENABLED
 ;
diff --git a/Source/Apps/FDU/fdu.doc b/Source/Apps/FDU/fdu.doc
index 8ee61e1e..e80b9a8f 100644
--- a/Source/Apps/FDU/fdu.doc
+++ b/Source/Apps/FDU/fdu.doc
@@ -1,14 +1,15 @@
 ================================================================
-Floppy Disk Utility (FDU) v5.3 for RetroBrew Computers 
-Disk IO / Zeta / Dual-IDE / N8 / RCBus / SmallZ80 / Dyno
+Floppy Disk Utility (FDU) v5.9 for RetroBrew Computers 
+Disk IO / Zeta / Dual-IDE / N8 / RCBus / SmallZ80 / Dyno / Nhyodyne / Duodyne
 ================================================================
 
-Updated January 5, 2020
+Updated December 12, 2023
 by Wayne Warthen (wwarthen@gmail.com)
 
 Application to test the hardware functionality of the Floppy 
 Disk Controller (FDC) on the ECB DISK I/O, DISK I/O V3, ZETA 
-SBC, Dual IDE w/ Floppy, or N8 board.
+SBC, Dual IDE w/ Floppy, N8, RCBus, SmallZ80, Dyno, Nhyodyne,
+Duodyne systems.
  
 The intent is to provide a testbed that allows direct testing 
 of all possible media types and modes of access.  The 
@@ -77,9 +78,10 @@ supported:
  - RCBus
  - SmallZ80
  - Dyno
- - MBC
+ - Nhyodyne (MBC)
+ - Duodyne (DUO)
 
-You must be using either a RomWBW or UBA based OS version.
+You must be using either a RomWBW or UNA based OS version.
 
 You must have one of the following floppy disk controllers:
 
@@ -93,7 +95,8 @@ You must have one of the following floppy disk controllers:
  - RCBus Scott Baker WDC-based Floppy Module
  - SmallZ80 FDC
  - Dyno FDC
- - MBC FDC
+ - Nhyodyne (MBC) FDC
+ - Duodyne (DUO) FDC
  
 Finally, you will need a floppy drive connected via an 
 appropriate cable:
@@ -165,8 +168,11 @@ hardwired I/O ranges are assumed in the code.
 Dyno does not have any relevant jumper settings.  The 
 hardwired I/O ranges are assumed in the code.
 
-The MBC FDC is expected to be strapped to use neither INT nor NMI.  It
-is also not expected to use DMA.
+The Nhyodyne (MBC) FDC is expected to be strapped to use neither INT
+nor NMI.  It is also not expected to use DMA.
+
+The Duodyne (DUO) FDC is expected to be strapped to use neither INT
+nor NMI.  It is also not expected to use DMA.
 
 Modes of Operation
 ------------------
@@ -533,4 +539,7 @@ WW 3/24/2021: v5.7
   - Added support for a few single-sided formats
 
 WW 7/26/2021: v5.8
-  - Added support for MBC FDC
+  - Added support for Nhyodyne (MBC) FDC
+
+WW 12/10/2023: v5.9
+  - Added support for Duodyne (DUO) FDC
diff --git a/Source/HBIOS/cfg_duo.asm b/Source/HBIOS/cfg_duo.asm
index c73532df..861e42bd 100644
--- a/Source/HBIOS/cfg_duo.asm
+++ b/Source/HBIOS/cfg_duo.asm
@@ -178,8 +178,8 @@ MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 ;
-FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.EQU	FDMODE_MBC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_DUO	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
 FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
 FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
 FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
diff --git a/Source/HBIOS/fd.asm b/Source/HBIOS/fd.asm
index 8512dd71..fc52bf77 100644
--- a/Source/HBIOS/fd.asm
+++ b/Source/HBIOS/fd.asm
@@ -84,6 +84,14 @@ FDC_DCR		.EQU	$35		; CONFIGURATION CONTROL REGISTER
 FDC_TC		.EQU	$37		; TERMINAL COUNT (W/ DACK)
   #DEFINE FDMODE_STR "MBC"
 #ENDIF
+#IF (FDMODE == FDMODE_DUO)
+FDC_MSR		.EQU	$80		; 8272 MAIN STATUS REGISTER
+FDC_DATA	.EQU	$81		; 8272 DATA PORT
+FDC_DOR		.EQU	$86		; DIGITAL OUTPUT REGISTER
+FDC_DCR		.EQU	$85		; CONFIGURATION CONTROL REGISTER
+FDC_TC		.EQU	$87		; TERMINAL COUNT (W/ DACK)
+  #DEFINE FDMODE_STR "DUO"
+#ENDIF
 ;
 ;
 ; DISK OPERATIONS
@@ -515,7 +523,7 @@ DOR_INIT	.EQU	11100000B	; INITIAL DEFAULT LATCH VALUE
 ;
 ; *** DIDE/N8/ZETA V2 ***
 ;
-#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
+#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC) | (FDMODE == FDMODE_DUO))
 DOR_INIT	.EQU	00001100B	; SOFT RESET INACTIVE, DMA ENABLED
 DOR_BR250	.EQU	DOR_INIT
 DOR_BR500	.EQU	DOR_INIT
@@ -812,6 +820,10 @@ FD_INIT:
 #IF (FDMODE == FDMODE_MBC)
 	PRTS("MBC$")
 #ENDIF
+;
+#IF (FDMODE == FDMODE_DUO)
+	PRTS("DUO$")
+#ENDIF
 ;	
 	PRTS(" IO=0x$")
 	LD	A,FDC_MSR
@@ -1455,7 +1467,7 @@ FC_SETDOR:
 ;
 ; SET FST_DCR
 ;
-#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
+#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC) | (FDMODE == FDMODE_DUO))
 ;
 FC_SETDCR
 	LD	(FST_DCR),A
@@ -1487,7 +1499,7 @@ FC_RESETFDC:
 #IF ((FDMODE == FDMODE_ZETA) | (FDMODE == FDMODE_DIO3) | (FDMODE == FDMODE_RCSMC))
 	RES	7,A
 #ENDIF
-#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
+#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC) | (FDMODE == FDMODE_DUO))
 	LD	A,0
 #ENDIF
 	CALL	FC_SETDOR
@@ -1504,7 +1516,7 @@ FC_RESETFDC:
 FC_PULSETC:
 ; PULSING TC NO LONGER REQUIRED BECAUSE WE ONLY READ A SINGLE SECTOR
 ;
-;#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
+;#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC) | (FDMODE == FDMODE_DUO))
 ;	IN	A,(FDC_TC)
 ;#ELSE
 ;	LD	A,(FST_DOR)
@@ -1561,7 +1573,7 @@ FC_MOTORON1:
 	CP	C			; COMPARE TO NEW MOTOR BITS
 	RET	Z			; SKIP DELAY, MOTOR WAS ALREADY ON
 #ENDIF
-#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC))
+#IF ((FDMODE == FDMODE_DIDE) | (FDMODE == FDMODE_N8) | (FDMODE == FDMODE_ZETA2) | (FDMODE == FDMODE_RCWDC) | (FDMODE == FDMODE_DYNO) | (FDMODE == FDMODE_EPFDC) | (FDMODE == FDMODE_MBC) | (FDMODE == FDMODE_DUO))
 	; SETUP DCR FOR DIDE HARDWARE
 	LD	A,(FCD_DCR)		; GET NEW DCR VALUE
 	CALL	FC_SETDCR		; AND IMPLEMENT IT
diff --git a/Source/HBIOS/ide.asm b/Source/HBIOS/ide.asm
index a086456a..aae7173e 100644
--- a/Source/HBIOS/ide.asm
+++ b/Source/HBIOS/ide.asm
@@ -1391,8 +1391,8 @@ IDE_RESET:
 ; IMMEDIATELY.  A SMALL WAIT IS PERFORMED HERE TO GIVE SUCH DEVICES
 ; A BETTER CHANCE TO SUCCEED LATER.
 ;
-;;;	CALL	LDELAY			; DELAY FOR SLAVE INIT
-	LD	DE,150000 / 16		; 
+;	LD	DE,150000 / 16		; 
+	LD	DE,300000 / 16		; 
 	CALL	VDELAY			; SMALL DELAY
 ;
 	JR	IDE_RESET3		; SKIP SOFT RESET
diff --git a/Source/HBIOS/ppide.asm b/Source/HBIOS/ppide.asm
index 8b027bfd..d70ede57 100644
--- a/Source/HBIOS/ppide.asm
+++ b/Source/HBIOS/ppide.asm
@@ -1373,8 +1373,8 @@ PPIDE_RESET:
 ; IMMEDIATELY.  A SMALL WAIT IS PERFORMED HERE TO GIVE SUCH DEVICES
 ; A BETTER CHANCE TO SUCCEED LATER.
 ;
-;;;	CALL	LDELAY			; DELAY FOR SLAVE INIT
-	LD	DE,150000 / 16		; 
+;	LD	DE,150000 / 16		; 
+	LD	DE,300000 / 16		; 
 	CALL	VDELAY			; SMALL DELAY
 ;
 	JR	PPIDE_RESET3		; SKIP SOFT RESET
diff --git a/Source/HBIOS/std.asm b/Source/HBIOS/std.asm
index bf7a372a..8ec8b51c 100644
--- a/Source/HBIOS/std.asm
+++ b/Source/HBIOS/std.asm
@@ -161,7 +161,8 @@ FDMODE_RCSMC	.EQU	7		; RCBUS SMC 9266 @ $40 (SCOTT BAKER)
 FDMODE_RCWDC	.EQU	8		; RCBUS WDC 37C65 @ $40 (SCOTT BAKER)
 FDMODE_DYNO	.EQU	9		; DYNO WDC 37C65 @ $84
 FDMODE_EPFDC	.EQU	10		; RCBUS ETCHED PIXELS FDC
-FDMODE_MBC	.EQU	11		; MULTI-BOARD COMPUTER FDC
+FDMODE_MBC	.EQU	11		; NHYODYNE (MBC) FDC
+FDMODE_DUO	.EQU	12		; DUODUYNE (DUO) FDC
 ;
 ; IDE MODE SELECTIONS
 ;
diff --git a/Source/ver.inc b/Source/ver.inc
index 359793f7..0a610dd3 100644
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -2,7 +2,7 @@
 #DEFINE	RMN	4
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.4.0-dev.31"
+#DEFINE BIOSVER	"3.4.0-dev.32"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP
diff --git a/Source/ver.lib b/Source/ver.lib
index 8c059b4e..f7c49ddc 100644
--- a/Source/ver.lib
+++ b/Source/ver.lib
@@ -3,5 +3,5 @@ rmn	equ	4
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.4.0-dev.31"
+	db	"3.4.0-dev.32"
 	endm