diff --git a/ReadMe.txt b/ReadMe.txt
index 2b3018a3..1fedc1ac 100644
--- a/ReadMe.txt
+++ b/ReadMe.txt
@@ -7,7 +7,7 @@
 ***********************************************************************
 
 Wayne Warthen (wwarthen@gmail.com)
-Version 2.9.2-pre.10, 2019-09-15
+Version 2.9.2-pre.11, 2019-09-20
 https://www.retrobrewcomputers.org/
 
 RomWBW is a ROM-based implementation of CP/M-80 2.2 and Z-System for 
diff --git a/Source/CBIOS/ver.inc b/Source/CBIOS/ver.inc
index 0f44e40e..afad7447 100644
--- a/Source/CBIOS/ver.inc
+++ b/Source/CBIOS/ver.inc
@@ -2,4 +2,4 @@
 #DEFINE	RMN	9
 #DEFINE	RUP	2
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"2.9.2-pre.10"
+#DEFINE BIOSVER	"2.9.2-pre.11"
diff --git a/Source/HBIOS/hbios.asm b/Source/HBIOS/hbios.asm
index 515f7470..7be689d8 100644
--- a/Source/HBIOS/hbios.asm
+++ b/Source/HBIOS/hbios.asm
@@ -1187,6 +1187,57 @@ HB_CPU1:
 	OUT	(CTCB),A		; SETUP CTCC
 	LD	A,1			; CTCC TIMER CONSTANT = 1
 	OUT	(CTCB),A		; SETUP CTCC TIMER CONSTANT
+;
+; ONLY IM2 IMPLEMENTED BELOW.  I DON'T SEE ANY REASONABLE WAY TO
+; IMPLEMENT AN IM1 TIMER BECAUSE THE CTC PROVIDES NO WAY TO
+; DETERMINE IF IT WAS THE CAUSE OF AN INTERRUPT OR A WAY TO
+; DETERMINE WHICH CHANNEL CAUSED AN INTERRUPT.
+;
+    #IF (INTMODE == 2)
+;
+	; TIMER INTERRUPT IS ON CTCD, VECTOR IS FOURTH IVT SLOT
+	LD	HL,HB_TIMINT		; TIMER INT HANDLER ADR
+	LD	(IVT(INT_CTC0D)),HL	; IVT ENTRY FOR CTC0D
+;
+	; CTC USES 4 CONSECUTIVE VECTOR POSITIONS, ONE FOR
+	; EACH CHANNEL.  BELOW WE SET THE BASE VECTOR TO THE
+	; START OF THE IVT, SO THE FIRST FOUR ENTIRES OF THE
+	; IVT CORRESPOND TO CTC CHANNELS A-D
+	LD	A,0
+	OUT	(CTCA),A		; SETUP CTC BASE INT VECTOR
+;
+	; CTCC IS SLAVED (WIRED) TO TO CTCD TO ACT AS A PRESCALER
+	; CONFIGURE CHANNEL D FOR 50HZ PERIODIC INTERRUPTS
+	; CTC CLK = 1,843,200HZ
+	; CTCC TIME CONSTANT = 256
+	; CTCD TIME CONSTANT = 144
+	; INT FREQ IS CTC CLK / CTCC TC / CTCD TC
+	; WHICH IS 1,843,200HZ / 256 / 144 = 50HZ
+	LD	A,%01010111		; CTCC CONTROL WORD VALUE
+		;  |||||||+-- 1=CONTROL WORD FLAG
+		;  ||||||+--- 1=SOFTWARE RESET
+		;  |||||+---- 1=TIME CONSTANT FOLLOWS
+		;  ||||+----- 0=AUTO TRIGGER WHEN TIME CONST LOADED
+		;  |||+------ 1=RISING EDGE TRIGGER
+		;  ||+------- 1=PRESCALER OF 16 (NOT USED)
+		;  |+-------- 1=COUNTER MODE
+		;  +--------- 0=NO INTERRUPTS
+	OUT	(CTCC),A		; SETUP CTCC
+	LD	A,0			; CTCC TIMER CONSTANT = 256, 0 MEANS 256
+	OUT	(CTCC),A		; SETUP CTCA TIMER CONSTANT
+	LD	A,%11010111		; CTCD CONTROL WORD VALUE
+		;  |||||||+-- 1=CONTROL WORD FLAG
+		;  ||||||+--- 1=SOFTWARE RESET
+		;  |||||+---- 1=TIME CONSTANT FOLLOWS
+		;  ||||+----- 0=AUTO TRIGGER WHEN TIME CONST LOADED
+		;  |||+------ 1=RISING EDGE TRIGGER
+		;  ||+------- 1=PRESCALER OF 16 (NOT USED)
+		;  |+-------- 1=COUNTER MODE
+		;  +--------- 1=ENABLE INTERRUPTS
+	OUT	(CTCD),A		; SETUP CTCD
+	LD	A,144			; CTCD TIMER CONSTANT = 144
+	OUT	(CTCD),A		; SETUP CTCD TIMER CONSTANT
+    #ENDIF
 ;
   #ENDIF
 ;
@@ -1229,7 +1280,7 @@ HB_CPU1:
 	LD	DE,(CPUOSC / 2) / 1000
 ;
 #IF (Z180_CLKDIV >= 1)
-	LD	A,L		; CPU TYPE
+	LD	(HB_CPUTYPE),A	; CPU TYPE
 	CP	2		; Z8S180 REV K OR BETTER?
 	JR	C,HB_CPU2	; IF NOT, NOT POSSIBLE!
 	; SET CLOCK DIVIDE TO 1 RESULTING IN FULL XTAL SPEED
@@ -1241,7 +1292,6 @@ HB_CPU1:
 #ENDIF
 
 #IF (Z180_CLKDIV >= 2)
-	LD	A,L		; CPU TYPE
 	CP	3		; Z8S180 REV N OR BETTER?
 	JR	C,HB_CPU2	; IF NOT, NOT POSSIBLE!
 	; SET CPU MULTIPLIER TO 1 RESULTING IN XTAL * 2 SPEED
diff --git a/Source/HBIOS/ver.inc b/Source/HBIOS/ver.inc
index 0f44e40e..afad7447 100644
--- a/Source/HBIOS/ver.inc
+++ b/Source/HBIOS/ver.inc
@@ -2,4 +2,4 @@
 #DEFINE	RMN	9
 #DEFINE	RUP	2
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"2.9.2-pre.10"
+#DEFINE BIOSVER	"2.9.2-pre.11"