diff --git a/Doc/RomWBW Applications.pdf b/Doc/RomWBW Applications.pdf
index 3f07a46e..1b72ee92 100644
Binary files a/Doc/RomWBW Applications.pdf and b/Doc/RomWBW Applications.pdf differ
diff --git a/Doc/RomWBW Disk Catalog.pdf b/Doc/RomWBW Disk Catalog.pdf
index e1334a72..d027baf4 100644
Binary files a/Doc/RomWBW Disk Catalog.pdf and b/Doc/RomWBW Disk Catalog.pdf differ
diff --git a/Doc/RomWBW Errata.pdf b/Doc/RomWBW Errata.pdf
index 290b1185..cf7fd521 100644
Binary files a/Doc/RomWBW Errata.pdf and b/Doc/RomWBW Errata.pdf differ
diff --git a/Doc/RomWBW System Guide.pdf b/Doc/RomWBW System Guide.pdf
index b9b4707f..a921c556 100644
Binary files a/Doc/RomWBW System Guide.pdf and b/Doc/RomWBW System Guide.pdf differ
diff --git a/Doc/RomWBW User Guide.pdf b/Doc/RomWBW User Guide.pdf
index 86ea2ee0..befcc36e 100644
Binary files a/Doc/RomWBW User Guide.pdf and b/Doc/RomWBW User Guide.pdf differ
diff --git a/ReadMe.md b/ReadMe.md
index dd0dbf6f..d5b340a1 100644
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -3,7 +3,7 @@
 **RomWBW ReadMe** \
 Version 3.5 \
 Wayne Warthen  ([wwarthen@gmail.com](mailto:wwarthen@gmail.com)) \
-01 Dec 2024
+05 Dec 2024
 
 # Overview
 
diff --git a/ReadMe.txt b/ReadMe.txt
index dcd5f193..e4df4fbc 100644
--- a/ReadMe.txt
+++ b/ReadMe.txt
@@ -1,6 +1,6 @@
 RomWBW ReadMe
 Wayne Warthen (wwarthen@gmail.com)
-01 Dec 2024
+05 Dec 2024
 
 
 
diff --git a/Source/Doc/Applications.md b/Source/Doc/Applications.md
index e376eeb3..46c1152f 100644
--- a/Source/Doc/Applications.md
+++ b/Source/Doc/Applications.md
@@ -398,23 +398,23 @@ system configuration.
 
 ### Basic Operation
 
-The application is an interactive application it does not have command line syntax.
+The application is an interactive application; it does not have a command line syntax.
 Instead commands are executed from within the application in a command line structure.
 
 When you first start the (`SYSCONF`) utility it will display the current switches
 followed by a command listing.
 
 When you first run the (`SYSCONF`) utility the NVRAM will be uninitialised, and can 
-be initialised using the (R)eset command, which write default values to NVRAM.
+be initialised using the (R)eset command, which writes default values to NVRAM.
 
 Updates are done immediately to NVRAM as you enter them, i.e. there is no confirm
-changes step. If you make an incorrect changes you simply need to enter a new
+changes step. If you make any incorrect changes, you simply need to enter a new
 command to set the Switch value correctly.
 
-Once a change has been made it is available, however may not take effect until
+Once a change has been made it is available, however it may not take effect until
 the next system reboot. This is dependent on the Switch itself.
 
-If no NVRAM is provided by your hardware then running this application will just
+If no NVRAM is provided by your hardware, then running this application will just
 report the missing hardware and exit immediately.
 
 To exit from the application use the (Q)uit command.
@@ -445,7 +445,7 @@ character is used to delimit parameters in the command.
 
 This switch will define if the system will perform auto boot at the RomWBW boot prompt. 
 Enabling this will not prevent a user from typing a boot command, so long as the timeout is not
-exceeded. When configured this replaces the (`BOOT_DEFAULT`) variable
+exceeded. When configured this replaces the (`AUTO_CMD`) variable
 defined in build configuration.
 
 Making changes to auto boot has no affect until the next reboot.
@@ -465,13 +465,13 @@ Making changes to auto boot has no affect until the next reboot.
 | S AB E,10             | Enable Auto Boot with 10 second delay             | 
 | S AB D                | Disable Auto Boot                                 | 
 
-#### Default Boot (DB)
+#### Boot Options (BO)
 
-This switch will define the default boot command to be executed when pressing enter
-at the RomWBW boot prompt. When configured this replaces the (`BOOT_TIMEOUT`) variable
-defined in build configuration.
+This switch will define the boot command to be executed when auto boot is
+enabled.  When configured this replaces the (`AUTO_CMD`) variable
+defined in the ROM build configuration.
 
-Making changes to auto boot has no affect until the next reboot.
+Making changes to boot options has no affect until the next reboot.
 
 **Arguments**
 
@@ -487,8 +487,8 @@ Making changes to auto boot has no affect until the next reboot.
 
 | Command     | Description                                              | 
 |-------------|----------------------------------------------------------| 
-| S DB D,2,14 | Set the default boot from Disk; Unit 2, Slice 14         | 
-| S DB R,M    | Set the default boot to be the (M)onitor Rom Application | 
+| S BO D,2,14 | Set the default boot from Disk; Unit 2, Slice 14         | 
+| S BO R,M    | Set the default boot to be the (M)onitor Rom Application | 
 
 ## CP/M 2.2
 
diff --git a/Source/Doc/SystemGuide.md b/Source/Doc/SystemGuide.md
index 4acf46ab..5911bb32 100644
--- a/Source/Doc/SystemGuide.md
+++ b/Source/Doc/SystemGuide.md
@@ -531,7 +531,7 @@ The following switch ID's are defined, and described in sections below.
 | Switch Number | Name         | Description                                   |      
 |---------------|--------------|-----------------------------------------------|      
 | 0x00          | -reserved-   | Reserved                                      |      
-| 0x01          | Default Boot | Default boot, either a Rom App or Disk Boot   |      
+| 0x01          | Boot Options | ROM or Disk Boot Settings                     |      
 | 0x02          | -n/a-        | -n/a- high order byte of previous switch      |      
 | 0x03          | Auto Boot    | Automatically boot enabled without user input |
 | 0x04 - 0xFE   | -future-     | Future general usage                          |
@@ -544,18 +544,19 @@ the bytes in NVRAM to check for authenticity before using the configuration.
 |-------------|--------------|-----------------------------------|      
 | 0x00        | Header Byte  | Header Signature Byte 'W'         |      
 | 0x01 - 0x03 | Switch Data  | Actual Switch Data                |      
-| 0x04        | Parity Check | Parity byte to check authenticity |    
+| 0x04        | Parity Check | Checksum byte to check integrity  |    
 
 The above data is copied into the HBIOS Configuration Block (HCB) at startup at 
 the location starting at CB_SWITCHES.
 
-### Default Boot (NVSW_DEFBOOT) 
+### Boot Options (NVSW_BOOTOPTS) 
 
-16 bit Switch defining the default Rom application or Disk device to boot. 
+16 bit Switch defining the ROM application or Disk device to boot if
+automatic booting is enabled.
 
 | Bit 15      | Bits 14-8         | Bits 7-0           |      
 |-------------|-------------------|--------------------|      
-| 1 = Rom App | -undefined-       | App to Boot (Char) |      
+| 1 = ROM App | -undefined-       | App to Boot (Char) |      
 | 0 = Disk    | Disk Unit (0-127) | Disk Slice (0-255) |      
 
 ### Auto Boot (NVSW_AUTOBOOT)
diff --git a/Source/Doc/UserGuide.md b/Source/Doc/UserGuide.md
index cb82d281..f19d0365 100644
--- a/Source/Doc/UserGuide.md
+++ b/Source/Doc/UserGuide.md
@@ -905,24 +905,24 @@ some limited configuration option options inside this NVRAM.
 Several configuration options are currently supported, these are known as Switches
 
 * Specify Automatic boot at startup, after an optional delay (AB)
-* Define the Default Disk or ROM App to be booted at startup (DB)
+* Define the Disk or ROM App to be booted at for automatic boot (BO)
 
-RomWBW uses bytes located at the start of RTC NVRAM, and includes a Parity check of 
-the bytes in NVRAM to check for authenticity before using the configuration.
+RomWBW uses bytes located at the start of RTC NVRAM, and includes a checksum of 
+the bytes in NVRAM to check for integrity before using the configuration.
 
 Initially NVRAM has to be reset (with default values), before it can be used.
-As well as setting defaults, it also writes the correct parity, and allows the
-NVRAM to be accessed and to store RomWBW config.
+As well as setting defaults, it also writes the correct checksum, and allows the
+NVRAM to be accessed and to store the RomWBW config.
 
-This is an explicit step that must be done, as any existing data stored is overitten.
-If you are using NVRAM for other purposes then you can continue to do so
+This is an explicit step that must be done, as any existing data stored is overwritten.
+If you are using NVRAM for other purposes, then you can continue to do so
 so long as you do NOT perform this Reset step.
 
-NVRAM may also need to be reset in these circumstances
+NVRAM may also need to be reset in these circumstances:
 
 * When there has been a loss of power to the NVRAM.
 * When upgrading to a new RomWBW version, or a RomWBW version that has new switches.
-* If the NVRAM has been overitten by another application.
+* If the NVRAM has been overwritten by another application.
 
 If you want to continue to use NVRAM in your applications you may want to consider storing
 your data above the RomWBW Switch data.
diff --git a/Source/HBIOS/hbios.asm b/Source/HBIOS/hbios.asm
index d2f8c154..ffee3df5 100644
--- a/Source/HBIOS/hbios.asm
+++ b/Source/HBIOS/hbios.asm
@@ -462,7 +462,7 @@ CB_HEAPTOP	.DW	0
 ;
 		.FILL	(HCB + $30 - $),0
 ;
-; First byte (header) of NVRAM = "W" if fully initialised, or a ststus byte
+; First byte (header) of NVRAM = "W" if fully initialised, or a status byte
 ; = 0 if no NVRAM detected, or = 1 If NVR exists, but not configured
 CB_SWITCHES	.DB	0		; this byte is set during init
 ;
@@ -470,20 +470,20 @@ CB_SWITCHES	.DB	0		; this byte is set during init
 ;     Bit 7-0 DISK BOOT SLice Number to Boot -> default = 0
 ;     Bit 7-0 ROM BOOT (alpha character) Application to boot -> default = "H"
 ;   Byte 1: (H)
-;     Bit 7 - ROM/DISK - Rom or Disk Boot -> Default=ROM=1 (BOOT_DEFAULT is Numeric/Alpha)
+;     Bit 7 - ROM/DISK - Rom or Disk Boot -> Default=ROM=1 (AUTO_CMD is Numeric/Alpha)
 ;     Bit 6-0 - DISK BOOT Disk Unit to Boot (0-127) -> default = 0
-CB_SWDEFBOOT	.DB	'H'		; (WORD) DEFAULT BOOT NVR OPTIONS. USED By ROMLDR
-		.DB	DBOOT_ROM	; Default Boot - ROM Application
+CB_SW_AB_OPT	.DB	'H'		; (WORD) AUTO BOOT NVR OPTIONS. USED By ROMLDR
+		.DB	BOPTS_ROM	; Boot Opts - ROM Application
 ;
 ;   Byte 0: (L)
 ;     Bit 7-6 - Reserved
 ;     Bit 5 - AUTO BOOT Auto boot, default=false (BOOT_TIMEOUT != -1)
 ;     Bit 4 - Reserved
 ;     Bit 3-0 - BOOT_TIMEOUT in seconds (0-15) 0=immediate -> default=3
-CB_SWAUTOB	.DB	0		; AUTO BOOT NVR OPTIONS. USED By ROMLDR
+CB_SW_AB_CFG	.DB	0		; AUTO BOOT NVR CONFIG. USED By ROMLDR
 ;
 ; CHECKSUM
-CB_SWITCHCK	.DB	0		; CHECKSUM (XOR=0), INCLUDES HEADER and CB_VERSION
+CB_SW_CKSUM	.DB	0		; CHECKSUM (XOR=0), INCLUDES HEADER and CB_VERSION
 ;
 ; STANDARD BANK ID'S START AT $D8. DEFAULT VALUES FOR 512KB SYSTEM WITH NO RESERVED BANKS
 ;
@@ -3407,7 +3407,7 @@ NVR_INIT:
 	JR	NZ, NVR_INIT_DEF	; failed to correclty read data
 	;
 	CALL	NVSW_CHECKSUM		; checksum calc into A
-	LD	HL,CB_SWITCHCK		; address of HCB switch checksum value
+	LD	HL,CB_SW_CKSUM		; address of HCB switch checksum value
 	CP	(HL)			; compare Caculated Check, with hcb Check Value
 	JR	Z,NVR_INIT_END		; The same so success
 NVR_INIT_DEF:
@@ -7611,7 +7611,7 @@ NVSW_RESET:
 ;
 NVSW_UPDATE:
 	CALL	NVSW_CHECKSUM		; CALC checksum into A
-	LD	(CB_SWITCHCK),A		; store checksum in hcb
+	LD	(CB_SW_CKSUM),A		; store checksum in hcb
 	CALL	NVSW_WRITE		; write the bytes to nvr
 	RET	Z			; Successful write, return
 	; write failed for some reason ???
@@ -7695,8 +7695,8 @@ NVSW_WRITE2:
 ;
 NVSW_DEFAULT:
 	.DB	'W'			; Signature Byte
-	.DB	'H'			; Default Boot - Rom Application [H]elp
-	.DB	DBOOT_ROM		; Default Boot - ROM Application
+	.DB	'H'			; Auto Boot - Rom Application [H]elp
+	.DB	BOPTS_ROM		; Auto Boot - ROM Application
 	.DB	0			; Auto Boot - NO auto boot
 	; Configure above byte from (BOOT_TIMEOUT != -1)
 ; SIZE OF NVR BYTES
diff --git a/Source/HBIOS/hbios.inc b/Source/HBIOS/hbios.inc
index bac1c903..b4096cea 100644
--- a/Source/HBIOS/hbios.inc
+++ b/Source/HBIOS/hbios.inc
@@ -340,7 +340,7 @@ SW_OPT		.EQU	%00000111	; SLICE/ROM APP
 ; NVRAM SWITCHES
 ;
 ; used for identifying Non Volitile Switches
-NVSW_DEFBOOT	.EQU	1		; Default Boot NVRAM Switch
+NVSW_BOOTOPTS	.EQU	1		; Boot Options NVRAM Switch
 NVSW_AUTOBOOT	.EQU	3		; Auto Boot NVRAM Switch
 ;
 ; NVRAM SWITCH BIT MASKS
@@ -349,8 +349,8 @@ NVSW_AUTOBOOT	.EQU	3		; Auto Boot NVRAM Switch
 ABOOT_AUTO	.EQU	%00100000	; AUTO=1/MANUAL=0 BOOT
 ABOOT_TIMEOUT	.EQU	%00001111	; MENU TIMEOUT IN SECONDS, 0=IMMEDIAGE
 ; DEFAULT BOOT MASKS
-DBOOT_ROM	.EQU	%10000000	; ROM=1/DISK=0 FLAG
-DBOOT_UNIT	.EQU	%01111111	; DISK UNIT
+BOPTS_ROM	.EQU	%10000000	; ROM=1/DISK=0 FLAG
+BOPTS_UNIT	.EQU	%01111111	; DISK UNIT
 ;
 ; MEDIA ID VALUES
 ;
@@ -510,8 +510,8 @@ HCB_BOOTMODE	.EQU	$14		; HBIOS BOOTMODE (BYTE)
 HCB_HEAP	.EQU	$20		; DWORD ADDRESS OF START OF HEAP
 HCB_HEAPTOP	.EQU	$22		; DWORD ADDRESS OF TOP OF HEAP
 ;
-HCB_SW_DBOOT	.EQU	$31		; DEFAULT BOOT CONFIG (WORD)
-HCB_SW_AUTOB	.EQU	$33		; AUTO BOOT CONFIG (BYTE)
+HCB_SW_BOPTS	.EQU	$31		; BOOT OPTIONS (WORD)
+HCB_SW_AUTOB	.EQU	$33		; AUTO BOOT (BYTE)
 ;
 ; MEMORY BANK IDS (ONE BYTE EACH)
 HCB_BIDCOM	.EQU	$D8		; COMMON BANK (UPPER 32K)
diff --git a/Source/HBIOS/romldr.asm b/Source/HBIOS/romldr.asm
index 88e984cc..3da3ea5b 100644
--- a/Source/HBIOS/romldr.asm
+++ b/Source/HBIOS/romldr.asm
@@ -742,10 +742,10 @@ fp_flopboot2:
 ;
 runnvr:
 	ld	bc,BC_SYSGET_SWITCH	; HBIOS SysGet NVRAM Switches
-	ld	d,NVSW_DEFBOOT		; Read Default Boot (disk/Rom) switch
+	ld	d,NVSW_BOOTOPTS		; Read Boot options (disk/Rom) switch
 	rst	08
 	ld	a,h
-	and	DBOOT_ROM		; Get the Default Boot from ROM Flag
+	and	BOPTS_ROM		; Get the Boot Opts ROM Flag
 	jr	nz,nvrsw_rom		; IF Set as ROM App BOOT, otherwise Disk
 ;
 nvrsw_disk:
diff --git a/Source/HBIOS/sysconf.asm b/Source/HBIOS/sysconf.asm
index 2cdbc002..81369f02 100644
--- a/Source/HBIOS/sysconf.asm
+++ b/Source/HBIOS/sysconf.asm
@@ -208,8 +208,8 @@ helpandloop:				; HELP MENU
 	; the folloiwng is just testing a single charater
 	cp	'A'			; Auto Boot help menu
 	JP	Z,HELP_AB
-	cp	'D'			; Default Boot help menu
-	JP	Z,HELP_DB
+	cp	'B'			; Boot Options help menu
+	JP	Z,HELP_BO
 ;
 printmainhelp:
 	ld	de,MSG_MENU		; nothing found Print the Main Menu
@@ -237,8 +237,8 @@ setvalueandloop:
 	; the folloiwng is just testing a single charater
 	cp	'A'			; Auto Boot help menu
 	JP	Z,SET_AB
-	cp	'D'			; Default Boot help menu
-	JP	Z,SET_DB
+	cp	'B'			; Boot Options help menu
+	JP	Z,SET_BO
 ;
 setvalueerror:
 	ld	de,MSG_QUESTION		; nothing found Print the Main Menu
@@ -269,8 +269,8 @@ PRT_STATUS:
 ;
 ; print invdividual stats, on all per switch
 ;
-	CALL	STAT_DEFBOOT
-	CALL	STAT_AUTOB
+	CALL	STAT_BO
+	CALL	STAT_AB
 ;
 ; end individual stats
 ;
@@ -297,31 +297,31 @@ STAT_NOTFOUND1:
 ; Specific Switches Below
 ; ======================================================================
 ;
-; DEFAULT BOOT
+; BOOT OPTIONS
 ;   Byte 1: (L)
 ;     Bit 7-0 DISK BOOT SLice Number to Boot -> default = 0
 ;     Bit 7-0 ROM BOOT (alpha character) Application to boot -> default = 0 translates to "H"
 ;   Byte 2: (H)
-;     Bit 7 - DISK/ROM - Disk or Rom Boot -> Default=ROM (BOOT_DEFAULT is Numeric/Alpha)
+;     Bit 7 - DISK/ROM - Disk or Rom Boot -> Default=ROM (AUTO_CMD is Numeric/Alpha)
 ;     Bit 6-0 - DISK BOOT Disk Unit to Boot (0-127) -> default = 0
 ;
 ; PRINT CURRENT SWITCH VALUE
 ;
-STAT_DEFBOOT:
+STAT_BO:
 	LD	BC,BC_SYSGET_SWITCH
-	LD	D,NVSW_DEFBOOT
+	LD	D,NVSW_BOOTOPTS
 	RST	08			; Should return auto Boot in HL
 	RET	NZ			; return if error
-	LD	de,MSG_DEFBOOT
+	LD	de,MSG_BO
 	CALL	prtstr
 	LD	A,H			; Byte 2
-	AND	DBOOT_ROM		; DISK/ROM
-	JR	NZ,STAT_AUTOROM		; is it ROM
-STAT_AUTODISK:
+	AND	BOPTS_ROM		; DISK/ROM
+	JR	NZ,STAT_BO_ROM		; is it ROM
+STAT_BO_DISK:
 	LD	de,MSG_DISK		; disk
 	CALL	prtstr
 	LD	A,H			; Byte 2
-	AND	DBOOT_UNIT		; Unit
+	AND	BOPTS_UNIT		; Unit
 	CALL	prtdecb
 	LD	de,MSG_DISK2		; Slice
 	CALL	prtstr
@@ -330,7 +330,7 @@ STAT_AUTODISK:
 	LD	de,MSG_DISK3		; close bracket
 	CALL	prtstr
 	RET
-STAT_AUTOROM:
+STAT_BO_ROM:
 	LD	de,MSG_ROM		; ROM
 	CALL	prtstr
 	LD	A,L			; ROM APP
@@ -341,67 +341,67 @@ STAT_AUTOROM:
 ;
 ; SET SWITCH VALUE
 ;
-SET_DB:
+SET_BO:
 	CALL	findskipws		; skip over WS to first char
-	JR	z,SET_DB_ERR		; if empty line, print main help
+	JR	z,SET_BO_ERR		; if empty line, print main help
 	call	upcase
 	cp	'R'			; ROM
-	JR	Z,SET_DB_ROM
+	JR	Z,SET_BO_ROM
 	cp	'D'			; DISK
-	JR	Z,SET_DB_DISK
-	JR	SET_DB_ERR
-SET_DB_ROM:
+	JR	Z,SET_BO_DISK
+	JR	SET_BO_ERR
+SET_BO_ROM:
 	CALL	findskipcomma
 	CALL	skipws
-	JR	z,SET_DB_ERR		; if empty line, print main help
+	JR	z,SET_BO_ERR		; if empty line, print main help
 	LD	L,A			; LOW BYTE ; next CHAR is the ROM App Name
-	LD	A,DBOOT_ROM
-	LD	H,A			; HIGH BYTE, has constant. DBOOT_ROM = $80
-	JR	SET_DB_SAVE		; SAVE
-SET_DB_DISK:
+	LD	A,BOPTS_ROM
+	LD	H,A			; HIGH BYTE, has constant. ABOOT_ROM = $80
+	JR	SET_BO_SAVE		; SAVE
+SET_BO_DISK:
 	CALL	findskipcomma
 	CALL	skipws
-	JR	z,SET_DB_ERR		; if empty line, print main help
+	JR	z,SET_BO_ERR		; if empty line, print main help
 	CALL	getnum			; next CHAR is the DISK UNIT
-	JR	C,SET_DB_ERR		; overflow
+	JR	C,SET_BO_ERR		; overflow
 	BIT	7,A			; is > 127
-	JR	NZ, SET_DB_ERR
+	JR	NZ, SET_BO_ERR
 	LD	H,A			; HIGH BYTE, has disk unit < $80
 	CALL	findskipcomma
 	CALL	skipws
-	JR	z,SET_DB_ERR		; if empty line, print main help
+	JR	z,SET_BO_ERR		; if empty line, print main help
 	CALL	getnum			; next CHAR is the SLICE
-	JR	C,SET_DB_ERR		; overflow
+	JR	C,SET_BO_ERR		; overflow
 	LD	L,A			; LOW BYTE, has the slice number
-	;JR	SET_DB_SAVE		; SAVE - Fall Through
-SET_DB_SAVE:
-	LD	D,NVSW_DEFBOOT		; DEFAULT BOOT
+	;JR	SET_BO_SAVE		; SAVE - Fall Through
+SET_BO_SAVE:
+	LD	D,NVSW_BOOTOPTS		; BOOT OPTIONS
 	JP	setvaluesave		; SAVE THE VALUE
-SET_DB_ERR:
+SET_BO_ERR:
 	JP	setvalueerror		; ERROR. Added this so can use JR above
 ;
 ; PRINT HELP TEST FOR SWITCH
 ;
-HELP_DB:
-	ld	de,MSG_DEFB_H
+HELP_BO:
+	ld	de,MSG_BO_H
 	JP	printhelp
 ;
-MSG_DEFBOOT	.DB	CR,LF, "  [DB] / Default Boot: ",0
+MSG_BO		.DB	CR,LF, "  [BO] / Boot Options: ",0
 MSG_DISK	.DB	"Disk (Unit = ",0
 MSG_DISK2	.DB	", Slice = ",0
 MSG_DISK3	.DB	")",0
 MSG_ROM		.DB	"ROM (App = \"",0
 MSG_ROM2	.DB	"\")",0
 ;
-MSG_DEFB_H	.DB	"\r\nDefault Boot - Disk or Rom App (DB):\r\n"
-		.DB	"  DB [R|D],[{romapp}|{unit},{slice}]\r\n"
-		.DB	"    e.g. S DB D,2,14 ; Disk Boot, unit 2, slice 14\r\n"
-		.DB	"         S DB R,M    ; Rom Application 'M'onitor\r\n"
+MSG_BO_H	.DB	"\r\nBoot Options - Disk or Rom App (BO):\r\n"
+		.DB	"  BO [R|D],[{romapp}|{unit},{slice}]\r\n"
+		.DB	"    e.g. S BO D,2,14 ; Disk Boot, unit 2, slice 14\r\n"
+		.DB	"         S BO R,M    ; Rom Application 'M'onitor\r\n"
 		.DB	"  Note: Disk: Unit (0-127); Slice (0-255)\r\n",0
 ;
 ;=======================================================================
 ;
-; AUTO BOOT
+; AUTO BOOT CONFIG
 ;   Byte 0: (L)
 ;     Bit 7-6 - Reserved
 ;     Bit 5 - AUTO BOOT Auto boot, default=false (i.e. BOOT_TIMEOUT != -1)
@@ -410,7 +410,7 @@ MSG_DEFB_H	.DB	"\r\nDefault Boot - Disk or Rom App (DB):\r\n"
 ;
 ; PRINT CURRENT SWITCH VALUE
 ;
-STAT_AUTOB:
+STAT_AB:
 	LD	BC,BC_SYSGET_SWITCH
 	LD	D,NVSW_AUTOBOOT
 	RST	08			; Should return auto Boot in HL
@@ -420,14 +420,14 @@ STAT_AUTOB:
 	LD	A,L			; Byte 1
 	LD	de,MSG_DISABLED
 	AND	ABOOT_AUTO		; enabled
-	JR	Z, STAT_AUTOB1		; disabled
+	JR	Z, STAT_AB1		; disabled
 	LD	de,MSG_ENABLED		; enabled
 	CALL	prtstr
 	LD	A,L			; Byte 1
 	AND	ABOOT_TIMEOUT		; timeout
 	CALL	prtdecb			; print timeout
 	LD	de,MSG_ENABLED2		; and closing bracket
-STAT_AUTOB1:
+STAT_AB1:
 	CALL	prtstr
 	RET
 ;
@@ -458,7 +458,7 @@ SET_AB_DISAB:
 	LD	L,0
 	;JR	SET_AB_SAVE		; SAVE - Fall Through
 SET_AB_SAVE:
-	LD	D,NVSW_AUTOBOOT		; AUTO BOOT
+	LD	D,NVSW_AUTOBOOT		; AUTO BOOT CONFIG
 	JP	setvaluesave		; SAVE THE VALUE
 SET_AB_ERR:
 	JP	setvalueerror		; ERROR. Added this so can use JR above
@@ -466,7 +466,7 @@ SET_AB_ERR:
 ; PRINT HELP TEST FOR SWITCH
 ;
 HELP_AB:
-	ld	de,MSG_AUTOB_H
+	ld	de,MSG_AB_H
 	JP	printhelp
 ;
 MSG_AUTOB:	.DB	CR,LF,"  [AB] / Auto Boot: ",0
@@ -474,7 +474,7 @@ MSG_ENABLED:	.DB	"Enabled (Timeout = ",0
 MSG_ENABLED2:	.DB	")",0
 MSG_DISABLED:	.DB	"Disabled",0
 ;
-MSG_AUTOB_H	.DB	"\r\nAutomatic Boot (AB):\r\n"
+MSG_AB_H	.DB	"\r\nAutomatic Boot (AB):\r\n"
 		.DB	"  AB <D|E>[,{timeout}]\r\n"
 		.DB	"    e.g. S AB E,3 ; enabled (show menu) with 3 second timout before boot\r\n"
 		.DB	"         S AB E,0 ; enabled with immediate effect, bypass menu\r\n"
@@ -1031,12 +1031,12 @@ stack		.equ	$		; stack top
 SLACK	.EQU	(NVR_END - $)
 ;
 #IF (SLACK < 0)
-	.ECHO	"*** NVRCONFIG APP IS TOO BIG!!!\n"
+	.ECHO	"*** SYSCONF APP IS TOO BIG!!!\n"
 	!!!	; FORCE AN ASSEMBLY ERROR
 #endif
 ;
 	.FILL	SLACK,$00
-	.ECHO	"NVRCONFIG space remaining: "
+	.ECHO	"SYSCONF space remaining: "
 	.ECHO	SLACK
 	.ECHO	" bytes.\n"
 ;
diff --git a/Source/ver.inc b/Source/ver.inc
index eed2089d..0ec376c5 100644
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -2,7 +2,7 @@
 #DEFINE	RMN	5
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.5.0-dev.97"
+#DEFINE BIOSVER	"3.5.0-dev.98"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP
diff --git a/Source/ver.lib b/Source/ver.lib
index adf5c697..8fa7f74b 100644
--- a/Source/ver.lib
+++ b/Source/ver.lib
@@ -3,5 +3,5 @@ rmn	equ	5
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.5.0-dev.97"
+	db	"3.5.0-dev.98"
 	endm