mirror of https://github.com/wwarthen/RomWBW.git
Mark Pruden
7 months ago
8 changed files with 500 additions and 56 deletions
@ -0,0 +1,398 @@ |
|||
;============================================================================== |
|||
; SLICE INVENTORY - Inventory Slice |
|||
; Version June-2025 |
|||
;============================================================================== |
|||
; |
|||
; Author: Mark Pruden |
|||
; |
|||
; This is a SUBSET of SLABEL.ASM -> Please See this program also when |
|||
; making changes, as most of the code found here exists there also |
|||
; |
|||
; This is a program CALLED from RomLoader, and is specific to RomWBW |
|||
; |
|||
; See SLABEL.ASM for ALL other Notes about This program. |
|||
;------------------------------------------------------------------------------ |
|||
; |
|||
; Change Log: |
|||
; 2025-06-30 [MAP] Initial v1.0 release for distribution |
|||
;______________________________________________________________________________ |
|||
; |
|||
; Include Files |
|||
; |
|||
#include "./hbios.inc" |
|||
#include "./layout.inc" |
|||
;______________________________________________________________________________ |
|||
; |
|||
; General operational equates (should not requre adjustment) |
|||
; |
|||
sigbyte1 .equ $A5 ; 1st sig byte boot info sector (bb_sig) |
|||
sigbyte2 .equ $5A ; 2nd sig byte boot info sector (bb_sig) |
|||
; |
|||
labelterm .equ '$' ; terminating charater for disk label |
|||
; |
|||
;***************************************************************************** |
|||
; |
|||
; APPLICATION WILL WILL BE LOADED AT USR_LOC. THEREFORE, THE CODE |
|||
; MUST "ORG" AT THIS ADDRESS. TO CHANGE THE LOAD LOCATION OF THIS |
|||
; CODE, YOU CAN UPDATE SLC_LOC IN LAYOUT.INC |
|||
; |
|||
.ORG SLC_LOC |
|||
; |
|||
;***************************************************************************** |
|||
; Main Code (shared) starts here |
|||
;***************************************************************************** |
|||
; |
|||
; Print list of all slices |
|||
; |
|||
prtslc: |
|||
ld de,PRTSLC_HDR ; Header for list of Slices |
|||
call prtstr ; Print It |
|||
; |
|||
ld bc,BC_SYSGET_DIOCNT ; FUNC: SYSTEM INFO GET DISK DRIVES |
|||
rst 08 ; E := UNIT COUNT |
|||
; |
|||
ld b,e ; MOVE Disk CNT TO B FOR LOOP COUNT |
|||
ld c,0 ; C WILL BE UNIT INDEX |
|||
prtslc1: |
|||
ld a,b ; loop counter |
|||
or a ; set flags |
|||
ret z ; IF no more drives, finished |
|||
; |
|||
ld a,c ; unit index |
|||
ld (currunit),a ; store the unit number |
|||
; |
|||
push bc ; save loop vars |
|||
call prtslc2 ; for each disk Unit, print its details |
|||
pop bc ; restore loop variables |
|||
; |
|||
inc c ; bump the unit number |
|||
djnz prtslc1 ; main disk loop |
|||
; |
|||
prtslcfin: |
|||
ret ; loop has finished, RETURN |
|||
; |
|||
;***************************************************************************** |
|||
; Supporting Code Stars Here |
|||
;***************************************************************************** |
|||
; |
|||
; Print list of All Slices for a given Unit |
|||
; |
|||
prtslc2: |
|||
; get the media infor |
|||
ld b,BF_DIOMEDIA ; get media information |
|||
ld e,1 ; with media discovery |
|||
rst 08 ; do media discovery |
|||
ret nz ; an error |
|||
; |
|||
ld a,MID_HD ; hard disk |
|||
cp e ; is it hard disk |
|||
ret nz ; if not noting to do |
|||
; |
|||
; setup the loop |
|||
ld b,64 ; arbitrary (?) number of slices to check. |
|||
; NOTE: could be higher, but each slice check has disk IO |
|||
ld c,0 ; starting at slice 0 |
|||
; |
|||
prtslc2a: |
|||
ld a,c ; slice number |
|||
ld (currslice),a ; save slice number |
|||
; |
|||
push bc ; save loop |
|||
call prtslc3 ; print detals of the slice |
|||
pop bc ; restore loop |
|||
ret nz ; if error dont continie |
|||
; |
|||
inc c ; next slice number |
|||
djnz prtslc2a ; loop if more slices |
|||
; |
|||
ret ; return from Slice Loop |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; Print details of a Slice for a given Unit/Slice |
|||
; |
|||
prtslc3: |
|||
; get the details of the device / slice |
|||
ld a,(currunit) |
|||
ld d,a ; unit |
|||
ld a,(currslice) |
|||
ld e,a ; slice |
|||
ld b,BF_EXTSLICE ; EXT function to check compute slice offset |
|||
rst 08 ; noting this call checks partition table. |
|||
ret NZ ; an error, for lots of reasons, e.g. Slice not valid |
|||
; |
|||
call thirdsector ; point to the third sector of partition |
|||
; |
|||
call diskread ; do the sector read |
|||
ret nz ; read error. exit the slice loop |
|||
; |
|||
; Check signature |
|||
ld bc,(bb_sig) ; get signature read |
|||
ld a,sigbyte1 ; expected value of first byte |
|||
cp b ; compare |
|||
jr nz,prtslc5 ; ignore missing signature and loop |
|||
ld a,sigbyte2 ; expected value of second byte |
|||
cp c ; compare |
|||
jr nz,prtslc5 ; ignore missing signature and loop |
|||
; |
|||
; Print volume label string at HL, '$' terminated, 16 chars max |
|||
ld a,(currunit) |
|||
call prtdecb ; print unit number as decimal |
|||
call pdot ; print a DOT |
|||
ld a,(currslice) |
|||
call prtdecb |
|||
ld a,' ' |
|||
call cout ; print a space |
|||
call cout ; print a space |
|||
ld hl,bb_label ; point to label |
|||
call pvol ; print it |
|||
call crlf |
|||
; |
|||
prtslc5: |
|||
xor a |
|||
ret |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; Print volume label string at HL, '$' terminated, 16 chars max |
|||
; |
|||
pvol: |
|||
ld b,16 ; init max char downcounter |
|||
pvol1: |
|||
ld a,(hl) ; get next character |
|||
cp labelterm ; set flags based on terminator $ |
|||
inc hl ; bump pointer regardless |
|||
ret z ; done if null |
|||
call cout ; display character |
|||
djnz pvol1 ; loop till done |
|||
ret ; hit max of 16 chars |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; advance the DE HL LBA sector by 2, ie third sector |
|||
; |
|||
thirdsector: |
|||
ld bc,2 ; sector offset |
|||
add hl,bc ; add to LBA value low word |
|||
jr nc,sectornum ; check for carry |
|||
inc de ; if so, bump high word |
|||
sectornum: |
|||
ld (lba),hl ; update lba, low word |
|||
ld (lba+2),de ; update lba, high word |
|||
ret |
|||
; |
|||
;=============================================================================== |
|||
; |
|||
; Read disk sector(s) |
|||
; DE:HL is LBA, B is sector count, C is disk unit |
|||
; |
|||
diskread: |
|||
; |
|||
; Seek to requested sector in DE:HL |
|||
ld a,(currunit) |
|||
ld c,a ; from the specified unit |
|||
set 7,d ; set LBA access flag |
|||
ld b,BF_DIOSEEK ; HBIOS func: seek |
|||
rst 08 ; do it |
|||
ret nz ; handle error |
|||
; |
|||
; Read sector(s) into buffer |
|||
ld a,(currunit) |
|||
ld c,a ; from the specified unit |
|||
ld e,1 ; read 1 sector |
|||
ld hl,(dma) ; read into info sec buffer |
|||
ld a,(BID_USR) ; get user bank to accum |
|||
ld d,a ; and move to D |
|||
ld b,BF_DIOREAD ; HBIOS func: disk read |
|||
rst 08 ; do it |
|||
ret ; and done |
|||
; |
|||
;***************************************************************************** |
|||
; SUPPORT ROUTINES |
|||
;***************************************************************************** |
|||
; |
|||
; Print a dot on console |
|||
; |
|||
pdot: |
|||
push af |
|||
ld a,'.' |
|||
call cout |
|||
pop af |
|||
ret |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; Print character in A without destroying any registers |
|||
; NOTE THIS CODE IS SPECIFIC AS IT USES HBIOS DIRECTLY |
|||
; |
|||
prtchr: |
|||
cout: |
|||
push af ; save registers |
|||
push bc |
|||
push de |
|||
push hl |
|||
LD B,BF_CIOOUT |
|||
LD C,CIO_CONSOLE |
|||
LD E,A |
|||
RST 08 |
|||
pop hl ; restore registers |
|||
pop de |
|||
pop bc |
|||
pop af |
|||
ret |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; Start a newline on console (cr/lf) |
|||
; |
|||
crlf2: |
|||
call crlf ; two of them |
|||
crlf: |
|||
push af ; preserve AF |
|||
ld a,13 ; <CR> |
|||
call prtchr ; print it |
|||
ld a,10 ; <LF> |
|||
call prtchr ; print it |
|||
pop af ; restore AF |
|||
ret |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; Print a zero terminated string at (de) without destroying any registers |
|||
; |
|||
prtstr: |
|||
push af |
|||
push de |
|||
; |
|||
prtstr1: |
|||
ld a,(de) ; get next char |
|||
or a |
|||
jr z,prtstr2 |
|||
call prtchr |
|||
inc de |
|||
jr prtstr1 |
|||
; |
|||
prtstr2: |
|||
pop de ; restore registers |
|||
pop af |
|||
ret |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; Print value of a in decimal with leading zero suppression |
|||
; |
|||
prtdecb: |
|||
push hl |
|||
push af |
|||
ld l,a |
|||
ld h,0 |
|||
call prtdec |
|||
pop af |
|||
pop hl |
|||
ret |
|||
; |
|||
;------------------------------------------------------------------------------- |
|||
; Print value of HL in decimal with leading zero suppression |
|||
; |
|||
prtdec: |
|||
push bc |
|||
push de |
|||
push hl |
|||
ld e,'0' |
|||
ld bc,-10000 |
|||
call prtdec1 |
|||
ld bc,-1000 |
|||
call prtdec1 |
|||
ld bc,-100 |
|||
call prtdec1 |
|||
ld c,-10 |
|||
call prtdec1 |
|||
ld e,0 |
|||
ld c,-1 |
|||
call prtdec1 |
|||
pop hl |
|||
pop de |
|||
pop bc |
|||
ret |
|||
prtdec1: |
|||
ld a,'0' - 1 |
|||
prtdec2: |
|||
inc a |
|||
add hl,bc |
|||
jr c,prtdec2 |
|||
sbc hl,bc |
|||
cp e |
|||
jr z,prtdec3 |
|||
ld e,0 |
|||
call cout |
|||
prtdec3: |
|||
ret |
|||
; |
|||
;=============================================================================== |
|||
; |
|||
PRTSLC_HDR .TEXT "\r\n\r\n" |
|||
.TEXT "Un.Sl Drive \r\n" |
|||
.TEXT "----- ----------------\r\n" |
|||
.DB 0 |
|||
; |
|||
;=============================================================================== |
|||
; Working data |
|||
;=============================================================================== |
|||
; |
|||
currunit .db 0 ; parameters for disk unit, current unit |
|||
currslice .db 0 ; parameters for disk slice, current slice |
|||
lba .dw 0, 0 ; lba address (4 bytes), of slice |
|||
; |
|||
BID_USR .db 0 ; Bank ID for user bank |
|||
dma .dw bl_infosec ; address for disk buffer |
|||
; |
|||
;=============================================================================== |
|||
; |
|||
; IT IS CRITICAL THAT THE FINAL BINARY BE EXACTLY SLC_SIZ BYTES. |
|||
; THIS GENERATES FILLER AS NEEDED. IT WILL ALSO FORCE AN ASSEMBLY |
|||
; ERROR IF THE SIZE EXCEEDS THE SPACE ALLOCATED. |
|||
; |
|||
SLACK .EQU (SLC_END - $) |
|||
; |
|||
#IF (SLACK < 0) |
|||
.ECHO "*** INVENTORY SLICE IS TOO BIG!!!\n" |
|||
!!! ; FORCE AN ASSEMBLY ERROR |
|||
#ENDIF |
|||
; |
|||
.FILL SLACK,$00 |
|||
.ECHO "Slice Inventory space remaining: " |
|||
.ECHO SLACK |
|||
.ECHO " bytes.\n" |
|||
; |
|||
;=============================================================================== |
|||
; Disk Buffer |
|||
;=============================================================================== |
|||
; |
|||
; define origin of disk buffer = 9000 |
|||
; Note this shares SAME Buffer Address as ROMLDR |
|||
.org $9000 |
|||
; |
|||
; Below is copied from ROM LDR |
|||
; Boot info sector is read into area below. |
|||
; The third sector of a disk device is reserved for boot info. |
|||
; |
|||
bl_infosec .equ $ |
|||
.ds (512 - 128) |
|||
bb_metabuf .equ $ |
|||
bb_sig .ds 2 ; signature (0xA55A if set) |
|||
bb_platform .ds 1 ; formatting platform |
|||
bb_device .ds 1 ; formatting device |
|||
bb_formatter .ds 8 ; formatting program |
|||
bb_drive .ds 1 ; physical disk drive # |
|||
bb_lu .ds 1 ; logical unit (lu) |
|||
.ds 1 ; msb of lu, now deprecated |
|||
.ds (bb_metabuf + 128) - $ - 32 |
|||
bb_protect .ds 1 ; write protect boolean |
|||
bb_updates .ds 2 ; update counter |
|||
bb_rmj .ds 1 ; rmj major version number |
|||
bb_rmn .ds 1 ; rmn minor version number |
|||
bb_rup .ds 1 ; rup update number |
|||
bb_rtp .ds 1 ; rtp patch level |
|||
bb_label .ds 16 ; 16 character drive label |
|||
bb_term .ds 1 ; label terminator ('$') |
|||
bb_biloc .ds 2 ; loc to patch boot drive info |
|||
bb_cpmloc .ds 2 ; final ram dest for cpm/cbios |
|||
bb_cpmend .ds 2 ; end address for load |
|||
bb_cpment .ds 2 ; CP/M entry point (cbios boot) |
|||
; |
|||
;=============================================================================== |
|||
|
|||
.END |
|||
Loading…
Reference in new issue