Fix updater bank display output

Also loads derfault console and serial device number now for consistance with boot rom.

Binary/ReadMe.txt

@@ -48,7 +48,7 @@ ROM Firmware Update Images (<plt>_<cfg>.upd)
 The files with a ".upd" extension are binary images identical to the
 .rom files, but they only have the first 128K bytes.  The first 128K
 is the system image without the ROM disk contents.  These files can be
-used to update the system image without modifyuing the ROM disk
+used to update the system image without modifying the ROM disk
 contents.  Refer to the Getting Started document for more information.
 
 ROM Executable Images (<plt>_<cfg>.com)

Source/HBIOS/updater.asm

@@ -58,7 +58,7 @@
 ;  IN THE CASE OF A FAILED UPDATE THIS OPTION COULD BE USED TO ATTEMPT TO
 ;  LOAD CP/M AND PERFORM THE NORMAL XMODEM / FLASH PROCESS TO RECOVER.
 ;
-; OPTION (H) - DEBUG OPTION - SWITCH ON CPU CLCOK DIVIDER ON SBC-V2-004+
+; OPTION (H) - DEBUG OPTION - SWITCH ON CPU CLOCK DIVIDER ON SBC-V2-004+
 ; OPTION (T) - DEBUG OPTION - TEST TIMER FOR 20 SECONDS. * = START AND FINISH
 ;
 ;
@@ -100,6 +100,8 @@
 HBX_BNKSEL	.EQU	$FE2B
 HBX_START	.EQU	$FE00
 ;
+BIOSBID		.EQU	$00		; BIOS BANK ID NUMBER
+;
 #DEFINE	HB_DI	DI
 #DEFINE	HB_EI	EI
 ;
@@ -130,6 +132,23 @@ BSPC:		.EQU	'H'-40h		; ^H = Backspace
 	LD	DE,HBX_START-MD_CSIZ	; ROUTINES TO
 	LD	BC,MD_CSIZ		; HIGH MEMORY
 	LDIR
+;
+	LD	BC,$F8F2		; LOOKUP
+	RST	08			; CURRENT	
+	LD	B,$FA			; CONSOLE
+	LD	HL,$112			; DEVICE
+	RST	08			; TO USE AS
+	LD	A,E			; DEFAULT
+	LD	(CONDEV),A
+;
+	LD	BC,$F8F2		; LOOKUP
+	RST	08			; CURRENT	
+	LD	B,$FA			; SERIAL
+	LD	HL,$110			; DEVICE
+	RST	08			; TO USE AS
+	LD	A,E			; DEFAULT
+	LD	(SERDEV),A
+;
 RESTART:
 	LD	DE,$0000		; SET UP
 	LD	HL,$0000		; START
@@ -159,7 +178,7 @@ MENULP:	CALL	MENU			; DISPLAY MENU
 ;
 	CP	'X'			; CHECK FOR
 	JP	Z,FAILUX		; USER EXIT
-
+;
 	CP	'R'			; CHECK FOR
 	JP	Z,REBOOT		; COLD REBOOT REQUEST
 ;
@@ -169,6 +188,9 @@ MENULP:	CALL	MENU			; DISPLAY MENU
 	CP	'S'			; CHECK FOR
 	CALL	Z,OPTIONS		; SERIAL CHANGE
 ;
+;	CP	'D'			; DUPLICATE
+;	CALL	Z,OPTIOND		; FLASH
+;
 #IF	(XFUDBG)
 	CP	'T'			; TEST TIMEOUT
 	CALL	Z,OPTIONT		; LOOP
@@ -285,7 +307,7 @@ csloop:	add	A,(HL)			; JUST ADD UP THE BYTES
 	LD	HL,pktNo		; UPDATE THE PACKET COUNTERS
 	INC 	(HL)
 	INC	HL
-	dec	(HL)
+	DEC	(HL)
 ;
 	LD 	C,ACK			; TELL UPLOADER THAT WE'RE HAPPY WITH WITH
 	CALL	SEROUT			; PACKET AND GO BACK AND FETCH SOME MORE
@@ -355,21 +377,19 @@ WSEC:	PUSH	HL			; WRITE A
 	OR	A			; IF TRANSFERRING
 	JR	Z,WSEC1			; OVER CONSOLE
 ;
-	LD	HL,MD_SECT		; IF SECTOR IS 0
-	LD	A,(HL)			; THEN DISPLAY
-	OR	A			; BANK # PREFIX
-	JR	NZ,NXTS1
+	LD	A,(MD_SECT)		; IF SECTOR IS 0
+	OR	A			; THEN DISPLAY
+	JR	NZ,NXTS1		; BANK # PREFIX
 	LD	HL,msgBank
 	CALL	PRTSTR0
-	LD	HL,MD_BANK
-	LD	A,(HL)
+	LD	A,(MD_BANK)
+	CALL	PRTHEXB
 ;
 NXTS1:	LD	C,' '			; DISPLAY
 	CALL	CONOUT			; CURRENT
 	LD	C,'S'			; SECTOR
 	CALL	CONOUT
-	LD	HL,MD_SECT
-	LD	A,(HL)
+	LD	A,(MD_SECT)
 	RRCA
 	RRCA
 	RRCA
@@ -511,6 +531,9 @@ MENU1:	CALL	PRTSTR0
 	CALL	PRTSTR0			; MENU OPTIONS
 	RET
 ;
+OPTIOND:
+	RET
+;
 OPTIONV:LD	A,(WRTVER)		; TOGGLE
 	CPL				; VERIFY
 	LD	(WRTVER),A		; FLAG
@@ -1031,6 +1054,7 @@ msgWriteV:	.DB	CR,LF,"(V) Toggle Write Verify : ",0
 msgBegin:	.DB	CR,LF,"(R) Reboot"
 		.DB	CR,LF,"(U) Begin Update"
 		.DB	CR,LF,"(X) Exit to Rom Loader"
+;		.DB	CR,LF,"(D) Duplicate ROM #1 to #2"
 #IF	(XFUDBG)
 		.DB	CR,LF,"(H) Select half speed"
 		.DB	CR,LF,"(T) Test 20s timeout"