Add definitions for Z80 EIPC / Z84C15

Signed-off-by: Sergey Kiselev <skiselev@gmail.com>

Source/HBIOS/eipc.inc

@@ -0,0 +1,75 @@
+;
+; Z80 EIPC (Z84C15) REGISTERS
+;
+EIPC_SCRP	.EQU	$EE		; SYSTEM CONTROL REGISTER POINTER
+EIPC_SCDP	.EQU	$EF		; SYSTEM CONTROL DATA PORT
+EIPC_WDTMR	.EQU	$F0		; WATCHDOG TIMER MASTER REGISTER
+EIPC_WDTCR	.EQU	$F1		; WATCHDOG TIMER COMMAND REGISTER
+EIPC_INTPR	.EQU	$F4		; INTERRUPT PRIORITY REGISTER
+;
+; SYSTEM CONTROL REGISTERS (REGISTER NUMBER TO BE WRITTEN TO EIPC_SCRP)
+;
+EIPC_WCR	.EQU	$00		; WAIT STATE CONTROL REGISTER
+EIPC_MWBR	.EQU	$01		; MEMORY WAIT BOUNDARY REGISTER
+EIPC_CSBR	.EQU	$02		; CHIP SELECT BOUNDARY REGISTER
+EIPC_MCR	.EQU	$03		; MISCELLANEOUS CONTROL REGISTER
+;
+; WAIT STATE VALUES (FOR EIPC_WCR)
+;
+EIPC_IO_0WS	.EQU	$00		; NO (ZERO) I/O WAIT STATES
+EIPC_IO_2WS	.EQU	$01		; 2 I/O WAIT STATES
+EIPC_IO_4WS	.EQU	$02		; 4 I/O WAIT STATES
+EIPC_IO_6WS	.EQU	$03		; 6 I/O WAIT STATES
+EIPC_MEM_OWS	.EQU	$00		; NO (ZERO) MEMORY WAIT STATES
+EIPC_MEM_1WS	.EQU	$04		; 1 MEMORY WAIT STATE
+EIPC_MEM_1WS	.EQU	$08		; 2 MEMORY WAIT STATES
+EIPC_MEM_1WS	.EQU	$0C		; 3 MEMORY WAIT STATES
+EIPC_OCF_0WS	.EQU	$00		; NO ADDITIONAL WAIT ON OP-CODE FETCH
+EIPC_OCF_1WS	.EQU	$10		; +1 WAIT STATE ON OP-CODE FETCH
+EIPC_INT_0WS	.EQU	$00		; NO WAIT ON INTERRUPT VECTOR READ
+EIPC_INT_1WS	.EQU	$20		; 1 WAIT STATE ON INT. VECTOR READ
+EIPC_CHAIN_0WS	.EQU	$00		; 0 WAIT ON INT ACK. / 0 WAIT ON RETI
+EIPC_CHAIN_2WS	.EQU	$40		; 2 WAIT ON INT ACK. / 0 WAIT ON RETI
+EIPC_CHAIN_4WS	.EQU	$80		; 4 WAIT ON INT ACK. / 2 WAIT ON RETI
+EIPC_CHAIN_6WS	.EQU	$C0		; 6 WAIT ON INT ACK. / 4 WAIT ON RETI
+;
+; MISCELLANEOUS CONTROL REGISTER VALUES
+;
+EIPC_CS0_DIS	.EQU	$00		; DISABLE /CS0
+EIPC_CS0_ENA	.EQU	$01		; ENABLE /CS0
+EIPC_CS1_DIS	.EQU	$00		; DISABLE /CS1
+EIPC_CS1_ENA	.EQU	$02		; ENABLE /CS1
+EIPC_32CRC_DIS	.EQU	$00		; DISABLE 32-BIT CRC FOR SIO CHANNEL A
+EIPC_32CRC_ENA	.EQU	$04		; ENABLE 32-BIT CRC FOR SIO CHANNEL A
+EIPC_RSTOUT_DIS	.EQU	$08		; DISABLE RESET OUTPUT
+EIPC_RSTOUT_ENA	.EQU	$00		; ENABLE RESET OUTPUT
+EIPC_CLKDIV1	.EQU	$10		; DIVIDE XTAL/CGC CLOCK BY ONE
+EIPC_CLKDIV2	.EQU	$00		; DIVIDE XTAL/CGC CLOCK BY TWO
+;
+; WATCHDOG TIMER MASTER REGISTER VALUES
+;
+EIPC_WDT_CONST	.EQU	$03		; MUST SET LOWER THREE BITS TO 011
+EIPC_HALT_IDLE1 .EQU	$00		; HALT / POWER DOWN MODE - IDLE 1 MODE
+EIPC_HALT_IDLE2 .EQU	$08		; HALT / POWER DOWN MODE - IDLE 2 MODE
+EIPC_HALT_STOP	.EQU	$10		; HALT / POWER DOWN MODE - STOP MODE
+EIPC_HALT_RUN	.EQU	$18		; HALT / POWER DOWN MODE - RUN MODE
+EIPC_WDT_P2_16	.EQU	$00		; SET WATCHDOG PERIOD TO TOC * 2^16
+EIPC_WDT_P2_18	.EQU	$20		; SET WATCHDOG PERIOD TO TOC * 2^18
+EIPC_WDT_P2_20	.EQU	$40		; SET WATCHDOG PERIOD TO TOC * 2^20
+EIPC_WDT_P2_22	.EQU	$60		; SET WATCHDOG PERIOD TO TOC * 2^22
+EIPC_WDTE	.EQU	$80		; ENABLE WATCHDOG TIMER
+;
+; WATCHDOG TIMER COMMAND REGISTER VALUES
+; 
+EIPC_DIS_WDT	.EQU	$B1		; DISABLE WATCHDOG TIMER
+EIPC_CLR_WDT	.EQU	$4E		; CLEAR WATCHDOG TIMER
+EIPC_HLT_MODE	.EQU	$DB		; CHANGE HALT MODE
+;
+; INTERRUPT PRIORITY REGISTER VALUES
+;
+EIPC_CTC_SIO_PIO	.EQU	$00	; PRIORITY HIGH TO LOW: CTC, SIO, PIO
+EIPC_SIO_CTC_PIO	.EQU	$01	; PRIORITY HIGH TO LOW: SIO, CTC, PIO
+EIPC_CTC_PIO_SIO	.EQU	$02	; PRIORITY HIGH TO LOW: CTC, PIO, SIO
+EIPC_PIO_SIO_CTC	.EQU	$03	; PRIORITY HIGH TO LOW: PIO, SIO, CTC
+EIPC_PIC_CTC_SIO	.EQU	$04	; PRIORITY HIGH TO LOW: PIO, CTC, SIO
+EIPC_SIO_PIO_CTC	.EQU	$05	; PRIORITY HIGH TO LOW: SIO, PIO, CTC