Update updater.asm

Revert AF/AF' PUSH/POP changes to cater for other banking routines other than SBC

Source/HBIOS/updater.asm

@@ -125,7 +125,7 @@ HBX_START	.EQU	$FE00
 #DEFINE	HB_DI	DI
 #DEFINE	HB_EI	EI
 ;
-XFUDBG		.EQU	1
+XFUDBG		.EQU	0
 ;
 		.ORG    USR_LOC
 ;
@@ -1057,16 +1057,16 @@ MD_FNCALL:
 	LD	DE,$0000
 	LD	BC,(MD_FBAS)		; PUT BANK AND SECTOR DATA IN BC
 ;
-	EX	AF,AF'
-	PUSH	AF
+;	EX	AF,AF'
+;	PUSH	AF
 	LD	A,(HB_CURBNK)		; WE ARE STARTING IN HB_CURBNK
 ;
 	HB_DI
 	CALL	MD_FJPHL
 	HB_EI
 ;
-	POP	AF
-	EX	AF,AF'
+;	POP	AF
+;	EX	AF,AF'
 ;
 	LD	A,C			; RETURN WITH STATUS IN A
 	RET
@@ -1124,7 +1124,8 @@ MD_FIDEN_R:				; THIS CODE GETS RELOCATED TO HIGH MEMORY
 ;
 MD_FERAS_R:				; THIS CODE GETS RELOCATED TO HIGH MEMORY
 ;
-	EX	AF,AF'			; SAVE CURRENT BANK
+;	EX	AF,AF'			; SAVE CURRENT BANK
+	PUSH	AF
 	LD	A,B			; SELECT BANK
 	CALL	HBX_BNKSEL		; TO PROGRAM
 ;
@@ -1165,7 +1166,8 @@ MD_WT4:	LD	A,(HL)			; DO TWO SUCCESSIVE READS
 	JR	MD_WT6
 MD_WT5:	LD	C,L			; SET SUCCESS STATUS
 ;
-MD_WT6:	EX	AF,AF'			; RETURN TO ORIGINAL BANK
+MD_WT6:	;EX	AF,AF'			; RETURN TO ORIGINAL BANK
+	POP	AF
 	JP	HBX_BNKSEL		; WHICH IS OUR RAM BIOS COPY
 ;
 ;======================================================================
@@ -1190,19 +1192,21 @@ MD_FREAD_R:				; THIS CODE GETS RELOCATED TO HIGH MEMORY
 	LD	H,C			; SECTOR
 	LD	L,D			; ADDRESS
 ;
-	EX	AF,AF'			; PUT DESTINATION BANK IN AF'
+;	EX	AF,AF'			; PUT DESTINATION BANK IN AF'
 ;
+	PUSH	AF
 MD_FRD1:
 	LD	A,B			; PUT SOURCE BANK IN AF
 	CALL	HBX_BNKSEL		; READ			; SWITCH TO SOURCE BANK
 	LD	C,(HL)			; BYTE
 ;
-	EX	AF,AF'			; SELECT BANK 		; SWITCH DESTINATION BANK
+;	EX	AF,AF'			; SELECT BANK 		; SWITCH DESTINATION BANK
+	POP	AF
 	PUSH	AF
 	CALL	HBX_BNKSEL		; TO WRITE
-	POP	AF
+;	POP	AF
 	LD	(IX+0),C		; WRITE BYTE
-	EX	AF,AF'			;			; PUT SOURCE BANK IN AF
+;	EX	AF,AF'			;			; PUT SOURCE BANK IN AF
 ;
 	INC	HL			; NEXT SOURCE LOCATION
 	INC	IX			; NEXT DESTINATION LOCATION
@@ -1211,6 +1215,7 @@ MD_FRD1:
 	BIT	4,D			; WE HAVE DONE ONE SECTOR
 	JR	Z,MD_FRD1
 ;
+	POP	AF
 	RET
 ;
 ;======================================================================
@@ -1234,20 +1239,24 @@ MD_FVERI_R:				; THIS CODE GETS RELOCATED TO HIGH MEMORY
 	LD	H,C			; SECTOR
 	LD	L,D			; ADDRESS
 ;
-	EX	AF,AF'			; PUT SOURCE BANK IN AF' (RAM)
+;	EX	AF,AF'			; PUT SOURCE BANK IN AF' (RAM)
+	PUSH	AF
 ;
 MD_FVE1:
 	LD	A,B			; SELECT BANK
 	CALL	HBX_BNKSEL		; TO READ 			; SWITCH TO FLASH BANK
-	LD	A,(HL)			; READ BYTE
+	LD	C,(HL)			; READ BYTE
 ;
-	EX	AF,AF'			; SELECT BANK			; SWITCH TO RAM BANK
+;	EX	AF,AF'			; SELECT BANK			; SWITCH TO RAM BANK
+	POP	AF
 	PUSH	AF
 	CALL	HBX_BNKSEL		; TO VERIFY AGAINST
-	POP	AF
-	EX	AF,AF'
+;	POP	AF
+;	EX	AF,AF'
 ;
+	LD	A,C
 	SUB	(IX+0)			; COMPARE BYTE
+	LD	C,A
 	JR	NZ,MD_FVE2		; EXIT IF MISMATCH
 ;
 	INC	HL			; NEXT SOURCE LOCATION
@@ -1257,9 +1266,9 @@ MD_FVE1:
 	BIT	4,D			; WE HAVE DONE ONE SECTOR
 	JR	Z,MD_FVE1
 ;
-MD_FVE2:
-	LD	C,A			; SET STATUS
-	EX	AF,AF'
+MD_FVE2:POP	AF
+;	LD	C,A			; SET STATUS
+;	EX	AF,AF'
 ;
 	RET
 ;
@@ -1284,11 +1293,12 @@ MD_FWRIT_R:				; THIS CODE GETS RELOCATED TO HIGH MEMORY
 	LD	H,C			; SECTOR
 	LD	L,D			; ADDRESS
 ;
-MD_FWRI1:
 	PUSH	AF
+MD_FWRI1:
+;	PUSH	AF
 	CALL	HBX_BNKSEL		; SELECT BANK TO READ
-	POP	AF
-	EX	AF,AF'			; SAVE CURRENT BANK
+;	POP	AF
+;	EX	AF,AF'			; SAVE CURRENT BANK
 ;
 	LD	C,(IX+0)		; READ IN BYTE
 ;
@@ -1315,12 +1325,15 @@ MD_FW7:	LD	A,(HL)			; FROM THE SAME FLASH ADDRESS.
 	INC	HL			; NEXT DESTINATION LOCATION
 	INC	IX			; NEXT SOURCE LOCATION
 ;
-	EX	AF,AF'			; RESTORE CURRENT BANK
+;	EX	AF,AF'			; RESTORE CURRENT BANK
+	POP	AF
+	PUSH	AF
 ;
 	INC	DE			; CONTINUE WRITING UNTIL
 	BIT	4,D			; WE HAVE DONE ONE SECTOR
 	JR	Z,MD_FWRI1
 ;
+	POP	AF
 	JP	HBX_BNKSEL		; RETURN TO ORIGINAL BANK WHICH IS OUR RAM BIOS COPY
 ;
 MD_FEND		.EQU	$