diff --git a/ReadMe.md b/ReadMe.md
index 64d961a1..2c727def 100644
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -707,7 +707,7 @@ most stable and you are less likely to encounter problems.
 ### Notes
 
   - You can change media, but it must be done while at the OS command
-    prompt and you **must** warm start CP/M by pressing ctrl-c. This is
+    prompt and you **must** warm start CP/M by pressing ctrl-c. This is
     a CP/M 2.2 constraint and is well documented in the DRI manuals.
 
   - The original versions of DDT, DDTZ, and ZSID used the RST 38 vector
@@ -1038,7 +1038,7 @@ system, you can use the FLASH application to update your ROM. The
 following is a typical example of transferring ROM image using XModem
 and flashing the chip in-situ.
 
-    E>xm r rom.rom
+    E>xm r rom.img
     
     XMODEM v12.5 - 07/13/86
     RBC, 28-Aug-2019 [WBW], ASCI
@@ -1050,7 +1050,7 @@ and flashing the chip in-situ.
     
     Thanks for the upload
     
-    E>flash write rom.rom
+    E>flash write rom.img
     FLASH4 by Will Sowerbutts <will@sowerbutts.com> version 1.2.3
     
     Using RomWBW (v2.6+) bank switching.
@@ -1179,30 +1179,6 @@ images.
   - FAT.COM
   - TUNE.COM
 
-# System Update
-
-If the system running ROMWBW utilizes the SST39SF040 Flash chip then it is possible to do a System Update in place of
-a System Upgrade in some cases.
-
-A System Update would involve only updating the BIOS, ROM applications and CP/M system.
-
-A System Update may be more favorable than a System Upgrade in cases such as:
-
- - Overwriting of the ROM drive is not desired.
- - Space is unavailable to hold a full ROMWBW ROM.
- - To mimimize time taken to transfer and flash a full ROM.
- - Configuration changes are only minor and do not impact disk applications.
-
-The ROMWBW build process generates a system upgrade file along with the normal ROM image and can be identified by the
-extension ".upd". It will be 128Kb in size. In comparison the normal ROM image will have the extension ".rom" and be
-512Kb or 1024Kb in size.
-
-Transferring and flashing the System Update is accomplished in the same manner as described above in *Upgrading* with
-the required difference being that the flash application needs to be directed to complete a partial flash using the
-/p command line switch.
-
-`E>flash write rom.upd /p`
-
 # RomWBW Distribution
 
 All source code and distributions are maintained on GitHub. Code
diff --git a/Source/Doc/GettingStarted.md b/Source/Doc/GettingStarted.md
index 8a0b41f1..5d96b795 100644
--- a/Source/Doc/GettingStarted.md
+++ b/Source/Doc/GettingStarted.md
@@ -1090,7 +1090,7 @@ update your ROM. The following is a typical example of transferring
 ROM image using XModem and flashing the chip in-situ.
 
 ```
-E>xm r rom.img
+E>xm r rom.rom
 
 XMODEM v12.5 - 07/13/86
 RBC, 28-Aug-2019 [WBW], ASCI
@@ -1102,7 +1102,7 @@ To cancel: Ctrl-X, pause, Ctrl-X
 
 Thanks for the upload
 
-E>flash write rom.img
+E>flash write rom.rom
 FLASH4 by Will Sowerbutts <will@sowerbutts.com> version 1.2.3
 
 Using RomWBW (v2.6+) bank switching.
@@ -1238,6 +1238,30 @@ images.
 * FAT.COM
 * TUNE.COM
 
+# System Update
+
+If the system running ROMWBW utilizes the SST39SF040 Flash chip then it is possible to do a System Update in place of
+a System Upgrade in some cases.
+
+A System Update would involve only updating the BIOS, ROM applications and CP/M system.
+
+A System Update may be more favorable than a System Upgrade in cases such as:
+
+ - Overwriting of the ROM drive is not desired.
+ - Space is unavailable to hold a full ROMWBW ROM.
+ - To mimimize time taken to transfer and flash a full ROM.
+ - Configuration changes are only minor and do not impact disk applications.
+
+The ROMWBW build process generates a system upgrade file along with the normal ROM image and can be identified by the
+extension ".upd". It will be 128Kb in size. In comparison the normal ROM image will have the extension ".rom" and be
+512Kb or 1024Kb in size.
+
+Transferring and flashing the System Update is accomplished in the same manner as described above in *Upgrading* with
+the required difference being that the flash application needs to be directed to complete a partial flash using the
+/p command line switch.
+
+`E>flash write rom.upd /p`
+
 # RomWBW Distribution
 
 All source code and distributions are maintained on GitHub. Code