Add RPH Support to PS2INFO

- PS2INFO now provides a small startup menu to select either MBC or RHYOPHYRE (needs to be expanded to other platforms).
- Battery condition testing enabled by default in RHYOPHYRE.
- Z180 system timer enabled by default in RHYOPHYRE.
- Default ACR in RHYOPHYRE now turns on the status LED to indicate hardware is alive early in boot process.

.gitignore

@@ -96,7 +96,7 @@ Tools/unix/zx/zx
 !Source/ZRC/*.bin
 !Source/ZZR/*.bin
 !Source/ZZR/*.hex
-!Tools/cpm/bin/*
+!Tools/cpm/**
 !Tools/unix/zx/*
 !Tools/zx/*
 

CODE_OF_CONDUCT.md

@@ -0,0 +1,128 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, religion, or sexual identity
+and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the
+  overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or
+  advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email
+  address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+wwarthen@gmail.com.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series
+of actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or
+permanent ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior,  harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within
+the community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.0, available at
+https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
+
+Community Impact Guidelines were inspired by [Mozilla's code of conduct
+enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at
+https://www.contributor-covenant.org/faq. Translations are available at
+https://www.contributor-covenant.org/translations.

Doc/ChangeLog.txt

@@ -60,6 +60,8 @@ Version 3.1.1
 - D?T: Substantial update to TastyBasic incuding a .COM executable
 - PMS: Added VGM audio file player
 - WBW: ZPMLDR and ZPM3 fixes, credit to Lars Nelson for finding ZPM3 source!
+- DDW: Add support for MBC sound card
+- WBW: Add support for "romless" booting
 
 Version 3.1
 -----------

LICENSE

@@ -0,0 +1,661 @@
+                    GNU AFFERO GENERAL PUBLIC LICENSE
+                       Version 3, 19 November 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU Affero General Public License is a free, copyleft license for
+software and other kinds of works, specifically designed to ensure
+cooperation with the community in the case of network server software.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+our General Public Licenses are intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  Developers that use our General Public Licenses protect your rights
+with two steps: (1) assert copyright on the software, and (2) offer
+you this License which gives you legal permission to copy, distribute
+and/or modify the software.
+
+  A secondary benefit of defending all users' freedom is that
+improvements made in alternate versions of the program, if they
+receive widespread use, become available for other developers to
+incorporate.  Many developers of free software are heartened and
+encouraged by the resulting cooperation.  However, in the case of
+software used on network servers, this result may fail to come about.
+The GNU General Public License permits making a modified version and
+letting the public access it on a server without ever releasing its
+source code to the public.
+
+  The GNU Affero General Public License is designed specifically to
+ensure that, in such cases, the modified source code becomes available
+to the community.  It requires the operator of a network server to
+provide the source code of the modified version running there to the
+users of that server.  Therefore, public use of a modified version, on
+a publicly accessible server, gives the public access to the source
+code of the modified version.
+
+  An older license, called the Affero General Public License and
+published by Affero, was designed to accomplish similar goals.  This is
+a different license, not a version of the Affero GPL, but Affero has
+released a new version of the Affero GPL which permits relicensing under
+this license.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU Affero General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Remote Network Interaction; Use with the GNU General Public License.
+
+  Notwithstanding any other provision of this License, if you modify the
+Program, your modified version must prominently offer all users
+interacting with it remotely through a computer network (if your version
+supports such interaction) an opportunity to receive the Corresponding
+Source of your version by providing access to the Corresponding Source
+from a network server at no charge, through some standard or customary
+means of facilitating copying of software.  This Corresponding Source
+shall include the Corresponding Source for any work covered by version 3
+of the GNU General Public License that is incorporated pursuant to the
+following paragraph.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the work with which it is combined will remain governed by version
+3 of the GNU General Public License.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU Affero General Public License from time to time.  Such new versions
+will be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU Affero General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU Affero General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU Affero General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU Affero General Public License as published
+    by the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU Affero General Public License for more details.
+
+    You should have received a copy of the GNU Affero General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If your software can interact with users remotely through a computer
+network, you should also make sure that it provides a way for users to
+get its source.  For example, if your program is a web application, its
+interface could display a "Source" link that leads users to an archive
+of the code.  There are many ways you could offer source, and different
+solutions will be better for different programs; see section 13 for the
+specific requirements.
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU AGPL, see
+<https://www.gnu.org/licenses/>.

ReadMe.md

@@ -3,7 +3,7 @@
 ## Z80/Z180 System Software
 
 Version 3.1 Pre-release  
-28 Feb 2022
+21 Mar 2022
 
 Wayne Warthen <wwarthen@gmail.com>
 

ReadMe.txt

@@ -1,6 +1,6 @@
 RomWBW Getting Started
 Wayne Warthen (mailto:wwarthen@gmail.com)
-28 Feb 2022
+21 Mar 2022
 
 
 
@@ -17,7 +17,7 @@ RomWBW
 Z80/Z180 System Software
 
 Version 3.1 Pre-release
-28 Feb 2022
+21 Mar 2022
 
 Wayne Warthen wwarthen@gmail.com
 

Source/Apps/Test/ps2info/ps2info.asm

@@ -6,12 +6,19 @@
 ; Simple utility that performs simple tests of an 8242 PS/2 controller,
 ; keyboard, and mouse.
 ;
+; WBW 2022-03-28: Add menu driven port selection
+;                 Add support for RHYOPHYRE
+;
 ;=======================================================================
 ;
 ; PS/2 Keyboard/Mouse controller port addresses (adjust as needed)
 ;
-iocmd	.equ	$E3	; PS/2 controller command port address
-iodat	.equ	$E2	; PS/2 controller data port address
+; MBC:
+iocmd_mbc	.equ	$E3	; PS/2 controller command port address
+iodat_mbc	.equ	$E2	; PS/2 controller data port address
+; RPH:
+iocmd_rph	.equ	$8D	; PS/2 controller command port address
+iodat_rph	.equ	$8C	; PS/2 controller data port address
 ;
 cpumhz	.equ	8	; for time delay calculations (not critical)
 ;
@@ -59,15 +66,54 @@ main:
 ;
 ; Display active controller port addresses
 ;
+	call	crlf2
+	ld	de,str_menu
+	call	prtstr
+main000:
+	ld	c,$06			; BDOS direct console I/O
+	ld	e,$FF			; Subfunction = read
+	call	bdos
+	cp	0
+	jr	z,main000
+	cp	'1'
+	jr	z,setup_mbc
+	cp	'2'
+	jr	z,setup_rph
+	cp	'x'
+	ret	z
+	cp	'X'
+	ret	z
+	jr	main
+;
+setup_mbc:
+	ld	a,iocmd_mbc
+	ld	(iocmd),a
+	ld	a,iodat_mbc
+	ld	(iodat),a
+	ld	de,str_mbc
+	jr	main00
+;
+setup_rph:
+	ld	a,iocmd_rph
+	ld	(iocmd),a
+	ld	a,iodat_rph
+	ld	(iodat),a
+	ld	de,str_rph
+	jr	main00
+;
+main00:
+	call	prtstr
 	call	crlf2
 	ld	de,str_cmdport
 	call	prtstr
-	ld	a,iocmd
+	;ld	a,iocmd
+	ld	a,(iocmd)
 	call	prthex
 	call	crlf
 	ld	de,str_dataport
 	call	prtstr
-	ld	a,iodat
+	;ld	a,iodat
+	ld	a,(iodat)
 	call	prthex
 ;
 	call	test_ctlr
@@ -782,7 +828,9 @@ wait_write:
 	ld	a,(timeout)		; setup timeout constant
 	ld	b,a
 wait_write1:
-	in	a,(iocmd)		; get status
+	ld	a,(iocmd)		; cmd port
+	ld	c,a			; ... to C
+	in	a,(c)			; get status
 	ld	c,a			; save status
 	and	$02			; isolate input buf status bit
 	ret	z			; 0 means ready, all done
@@ -804,7 +852,9 @@ wait_read:
 	ld	a,(timeout)		; setup timeout constant
 	ld	b,a
 wait_read1:
-	in	a,(iocmd)		; get status
+	ld	a,(iocmd)		; cmd port
+	ld	c,a			; ... to C
+	in	a,(c)			; get status
 	ld	c,a			; save status
 	and	$01			; isolate input buf status bit
 	xor	$01			; invert so 0 means ready
@@ -824,7 +874,9 @@ check_read:
 ; Check for data ready to read
 ;   A=0 indicates data available (ZF set)
 ;
-	in	a,(iocmd)		; get status
+	ld	a,(iocmd)		; cmd port
+	ld	c,a			; ... to C
+	in	a,(c)			; get status
 	and	$01			; isolate input buf status bit
 	xor	$01			; invert so 0 means ready
 	ret
@@ -834,7 +886,9 @@ check_read_kbd:
 ; Check for keyboard data ready to read
 ;   A=0 indicates data available (ZF set)
 ;
-	in	a,(iocmd)		; get status
+	ld	a,(iocmd)		; cmd port
+	ld	c,a			; ... to C
+	in	a,(c)			; get status
 	and	%00100001		; isolate input buf status bit
 	cp	%00000001		; data ready, not mouse
 	ret
@@ -844,7 +898,9 @@ check_read_mse:
 ; Check for mouse data ready to read
 ;   A=0 indicates data available (ZF set)
 ;
-	in	a,(iocmd)		; get status
+	ld	a,(iocmd)		; cmd port
+	ld	c,a			; ... to C
+	in	a,(c)			; get status
 	and	%00100001		; isolate input buf status bit
 	cp	%00100001		; data ready, is mouse
 	ret
@@ -860,8 +916,10 @@ put_cmd:
 	scf				; else, signal timeout error
 	ret				; and bail out
 put_cmd1:
+	ld	a,(iocmd)		; cmd port
+	ld	c,a			; ... to C
 	ld	a,e			; recover value to write
-	out	(iocmd),a		; write it
+	out	(c),a			; write it
 	or	a			; clear CF for success
 	ret
 ;
@@ -889,8 +947,10 @@ put_data:
 	scf				; else, signal timeout error
 	ret				; and bail out
 put_data1:
+	ld	a,(iodat)		; data port
+	ld	c,a			; ... to C
 	ld	a,e			; recover value to write
-	out	(iodat),a		; write it
+	out	(c),a			; write it
 	or	a			; clear CF for success
 	ret
 ;
@@ -947,7 +1007,9 @@ get_data:
 	scf				; else signal timeout error
 	ret				; and bail out
 get_data1:
-	in	a,(iodat)		; get data byte
+	ld	a,(iodat)		; data port
+	ld	c,a			; ... to C
+	in	a,(c)			; get data byte
 	or	a			; clear CF for success
 	ret
 ;
@@ -1239,7 +1301,14 @@ delay1:
 ; Constants
 ;=======================================================================
 ;
-str_banner		.db	"PS/2 Keyboard/Mouse Information v0.4, 7-Jan-2022",0
+str_banner		.db	"PS/2 Keyboard/Mouse Information v0.5, 28-Mar-2022",0
+str_menu		.db	"PS/2 Controller Port Options:\r\n\r\n"
+			.db	"  1 - MBC\r\n"
+			.db	"  2 - RHYOPHYRE\r\n"
+			.db	"  X - Exit Application\r\n"
+			.db	"\r\nSelection? ",0
+str_mbc			.db	"MBC",0
+str_rph			.db	"RHYOPHYRE",0
 str_exit		.db	"Done, Thank you for using PS/2 Keyboard/Mouse Information!",0
 str_cmdport		.db	"Controller Command Port: ",0
 str_dataport		.db	"Controller Data Port: ",0
@@ -1321,6 +1390,9 @@ stksav		.dw	0		; stack pointer saved at start
 		.fill	stksiz,0	; stack
 stack		.equ	$		; stack top
 ;
+iocmd		.db	0
+iodat		.db	0
+;
 workbuf		.fill	8
 workbuf_len	.db	0
 ;

Source/Apps/Tune/tune.asm

@@ -44,6 +44,7 @@
 ;   2020-09-03 [E?B] Add support for Ed Brindley YM/AY Sound Card v6
 ;   2021-08-13 [WBW] Add support for LiNC Z50 Sound Card
 ;   2021-08-17 [WBW] When playing via HBIOS, call BF_SNDRESET at end
+;   2022-03-20 [DDW] Add support for MBC PSG module
 ;_______________________________________________________________________________
 ;
 ; ToDo:
@@ -622,6 +623,9 @@ CFGTBL:	;	PLT	RSEL	RDAT	RIN	Z180	ACR
 ;
 	.DB	$0B,	$33,	$32,	$32,	$FF,	$FF	; RCZ280 W/ LINC SOUND MODULE
 	.DW	HWSTR_LINC
+;
+	.DB	13,	$A0,	$A1,	$A0,	$FF,	$A2	; MBC
+	.DW	HWSTR_MBC
 ;
 	.DB	$FF					; END OF TABLE MARKER
 ;
@@ -650,7 +654,7 @@ TMP		.DB	0	; work around use of undocumented Z80
 HBIOSMD		.DB	0	; NON-ZERO IF USING HBIOS SOUND DRIVER, ZERO OTHERWISE
 OCTAVEADJ	.DB	0	; AMOUNT TO ADJUST OCTAVE UP OR DOWN
 
-MSGBAN		.DB	"Tune Player for RomWBW v3.4, 17-Aug-2021",0
+MSGBAN		.DB	"Tune Player for RomWBW v3.5, 20-Mar-2022",0
 MSGUSE		.DB	"Copyright (C) 2021, Wayne Warthen, GNU GPL v3",13,10
 		.DB	"PTxPlayer Copyright (C) 2004-2007 S.V.Bulba",13,10
 		.DB	"MYMPlay by Marq/Lieves!Tuore",13,10,13,10
@@ -674,6 +678,7 @@ HWSTR_RCEB	.DB	"RC2014 Sound Module (EB)",0
 HWSTR_RCEB6	.DB	"RC2014 Sound Module (EBv6)",0
 HWSTR_RCMF	.DB	"RC2014 Sound Module (MF)",0
 HWSTR_LINC	.DB	"Z50 LiNC Sound Module",0
+HWSTR_MBC	.DB	"NHYODYNE Sound Module",0
 
 MSGUNSUP	.db	"MYM files not supported with HBIOS yet!\r\n", 0
 
@@ -2649,4 +2654,3 @@ data:
 ;
 ;===============================================================================
 	.END
-

Source/Apps/rtc.asm

@@ -29,6 +29,8 @@
 ;
 ;[2021/07/10] v1.7 Support MBC (AJL)
 ;
+;[2022/03/27] v1.8 Support RHYOPHYRE
+;
 ; Constants
 ;
 mask_data	.EQU	%10000000	; RTC data line
@@ -46,6 +48,7 @@ PORT_SCZ180	.EQU	$0C		; RTC port for SCZ180
 PORT_DYNO	.EQU	$0C		; RTC port for DYNO
 PORT_RCZ280	.EQU	$C0		; RTC port for RCZ280
 PORT_MBC	.EQU	$70		; RTC port for MBC
+PORT_RPH	.EQU	$84		; RTC port for RHYOPHYRE
 
 
 BDOS		.EQU	5		; BDOS invocation vector
@@ -1126,6 +1129,11 @@ HINIT:
 	LD	DE,PLT_MBC
 	CP	13		; MBC
 	JR	Z,RTC_INIT2
+;
+	LD	C,PORT_RPH
+	LD	DE,PLT_RPH
+	CP	14		; RHYOPHYRE
+	JR	Z,RTC_INIT2
 ;
 	; Unknown platform
 	LD	DE,PLTERR	; BIOS error message
@@ -1622,7 +1630,7 @@ TESTING_BIT_DELAY_OVER:
 
 RTC_HELP_MSG:
 	.DB	0Ah, 0Dh		; line feed and carriage return
-	.TEXT	"RTC: Version 1.7"
+	.TEXT	"RTC: Version 1.8"
 	.DB	0Ah, 0Dh		; line feed and carriage return
 	.TEXT	"Commands: E)xit T)ime st(A)rt S)et R)aw L)oop C)harge N)ocharge D)elay I)nit G)et P)ut B)oot W)arm-start H)elp"
 	.DB	0Ah, 0Dh		; line feed and carriage return
@@ -1751,6 +1759,7 @@ PLT_SCZ180	.TEXT	", SC Z180 RTC Module Latch Port 0x0C\r\n$"
 PLT_DYNO	.TEXT	", DYNO RTC Module Latch Port 0x0C\r\n$"
 PLT_RCZ280	.TEXT	", RC2014 Z280 RTC Module Latch Port 0xC0\r\n$"
 PLT_MBC		.TEXT	", MBC RTC Latch Port 0x70\r\n$"
+PLT_RPH		.TEXT	", RHYOPHYRE RTC Latch Port 0x84\r\n$"
 
 ;
 ; Generic FOR-NEXT loop algorithm

Source/CBIOS/cbios.asm

@@ -302,6 +302,13 @@ BOOT:
 	; STANDARD BOOT INVOCATION
 	;LD	SP,STACK	; STACK FOR INITIALIZATION
 	LD	SP,CCP_LOC	; PUT STACK JUST BELOW CCP
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nCBIOS Starting...$"
+	CALL	PRTSTRD
+	.DB	"\r\nCopying INIT code to 0x8000...$"
+#ENDIF
 ;
 	; COPY INITIALIZATION CODE TO RUNNING LOCATION $8000
 	LD	HL,BUFPOOL
@@ -311,6 +318,11 @@ BOOT:
 	PUSH	HL		; SAVE START ADR AGAIN FOR BELOW
 	PUSH	BC		; SAVE LENGTH FOR BELOW
 	LDIR			; COPY THE CODE
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nClearing disk buffer...$"
+#ENDIF
 ;
 	; CLEAR BUFFER
 	POP	BC		; RECOVER LENGTH
@@ -320,10 +332,30 @@ BOOT:
 	INC	DE		; OFFSET DEST
 	DEC	BC		; REDUCE LEN BY ONE
 	LDIR			; USE LDIR TO FILL
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nStarting INIT routine at 0x8000$"
+#ENDIF
 ;
 	CALL	INIT		; PERFORM COLD BOOD ROUTINE
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nResetting CP/M...$"
+#ENDIF
 	CALL	RESCPM		; RESET CPM
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nPerforming Auto Submit...$"
+#ENDIF
 	CALL	AUTOSUB		; PREP AUTO SUBMIT, IF APPROPRIATE
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nLaunching CP/M...$"
+#ENDIF
 ;
 	JR	GOCPM		; THEN OFF TO CP/M WE GO...
 ;
@@ -444,6 +476,12 @@ GOCPM:
 CURDSK:
 	LD	A,(CDISK)		; GET CURRENT USER/DISK
 GOCCP:
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nTransfer to CCP...$"
+#ENDIF
+;
 	LD	C,A			; SETUP C WITH CURRENT USER/DISK, ASSUME IT IS OK
 	JP	CCP_LOC			; JUMP TO COMMAND PROCESSOR
 ;
@@ -2011,7 +2049,13 @@ BUFPOOL	.EQU	$		; START OF BUFFER POOL
 HEAPEND	.EQU	CBIOS_END - 64		; TOP OF HEAP MEM, END OF CBIOS LESS 32 ENTRY STACK
 ;
 INIT:
-	DI				; NO INTERRUPTS FOR NOW
+;
+#IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nStarting INIT....$"
+#ENDIF
+;
+	;DI				; NO INTERRUPTS FOR NOW
 
 	; ADJUST BOOT VECTOR TO REBOOT ROUTINE
 	LD	HL,REBOOT		; GET REBOOT ADDRESS
@@ -2068,12 +2112,21 @@ INIT:
 	LD	(BNKBIOS),A		; ... AND SAVE IT
 	LD	A,E			; GET USER BANK RETURNED IN E
 	LD	(BNKUSER),A		; ... AND SAVE IT
-
+;
+  #IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nReseting HBIOS....$"
+  #ENDIF
+;
 	; SOFT RESET HBIOS
 	LD	B,BF_SYSRESET		; HB FUNC: RESET
 	LD	C,BF_SYSRES_INT		; WARM START
 	RST	08			; DO IT
-
+;
+  #IF DEBUG
+	CALL	PRTSTRD
+	.DB	"\r\nCopying HCB....$"
+  #ENDIF
 	; CREATE A TEMP COPY OF THE HBIOS CONFIG BLOCK (HCB)
 	; FOR REFERENCE USE DURING INIT
 	LD	B,BF_SYSSETCPY		; HBIOS FUNC: SETUP BANK COPY

Source/CBIOS/config.asm

@@ -4,6 +4,7 @@
 CLRRAMDISK	.EQU	CLR_AUTO	; CLR_ALWAYS, CLR_NEVER, CLR_AUTO (CLEAR IF INVALID DIR AREA)
 WRTCACHE	.EQU	TRUE		; ENABLE WRITE CACHING IN CBIOS (DE)BLOCKING ALGORITHM
 DSKTRACE	.EQU	FALSE		; ENABLE TRACING OF CBIOS DISK FUNCTION CALLS
+DEBUG		.EQU	FALSE		; MISCELLANEOUS DEBUG TRACING
 ;
 CPM_LOC		.EQU	$D000		; LOCATION OF START OF CCP
 ;

Source/CBIOS/util.asm

@@ -105,14 +105,61 @@ WRITESTR2:
 	POP	AF
 	RET
 ;
+#IF DEBUG
 ;
+; PRINT A STRING AT ADDRESS SPECIFIED IN HL
+; STRING MUST BE TERMINATED BY '$'
+; USAGE:
+;   LD	HL,MYSTR
+;   CALL PRTSTR
+;   ...
+;   MYSTR: .DB  "HELLO$"
 ;
-TSTPT:
-	PUSH	DE
-	LD	DE,STR_TSTPT
-	CALL	WRITESTR
-	POP	DE
-	JR	REGDMP			; DUMP REGISTERS AND RETURN
+PRTSTR:
+	LD	A,(HL)
+	INC	HL
+	CP	'$'
+	RET	Z
+	CALL	COUT
+	JR	PRTSTR
+;
+; PRINT A STRING DIRECT: REFERENCED BY POINTER AT TOP OF STACK
+; STRING MUST BE TERMINATED BY '$'
+; USAGE:
+;   CALL PRTSTRD
+;   .DB  "HELLO$"
+;   ...
+;
+PRTSTRD:
+	EX	(SP),HL
+	PUSH	AF
+	CALL	PRTSTR
+	POP	AF
+	EX	(SP),HL
+	RET
+;
+; PRINT A STRING INDIRECT: REFERENCED BY INDIRECT POINTER AT TOP OF STACK
+; STRING MUST BE TERMINATED BY '$'
+; USAGE:
+;   CALL PRTSTRI(MYSTRING)
+;   MYSTRING	.DB	"HELLO$"
+;
+PRTSTRI:
+	EX	(SP),HL
+	PUSH	AF
+	LD	A,(HL)
+	INC	HL
+	PUSH	HL
+	LD	H,(HL)
+	LD	L,A
+	CALL	PRTSTR
+	POP	HL
+	INC	HL
+	POP	AF
+	EX	(SP),HL
+	RET
+;
+#ENDIF
 ;
 ; PANIC: TRY TO DUMP MACHINE STATE
 ;

Source/Doc/Architecture.md

@@ -223,6 +223,18 @@ initialization routine. At this point, the prior HBIOS code has been
 discarded and overwritten. Finally, the Boot Loader is invoked just like
 a ROM Boot.
 
+ROM-less Boot
+-------------
+
+Some hardware supported by RomWBW has a special mechanism for loading
+the initial code.  These systems have no ROM chips.  However, they
+have a small hardware bootstrap that loads a chunk of code from a
+disk device directlly into RAM at system startup.
+
+The startup then proceeds very much like the Application Boot
+process described above.  HBIOS is installed in it's operating bank
+and control is passed to the loader.
+
 Notes
 -----
 

Source/HBIOS/Build.cmd

@@ -93,8 +93,10 @@ copy /b romldr.bin + dbgmon.bin + ..\zsdos\zsys_wbw.bin osimg_small.bin || exit
 :: should yield a result of zero.
 ::
 
-for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
-  "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
+if %ROMSize% gtr 0 (
+    for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
+      "%TOOLS%\srecord\srec_cat.exe" %%f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o %%f -Binary || exit /b
+    )
 )
 
 ::
@@ -113,17 +115,23 @@ for %%f in (hbios_rom.bin osimg.bin osimg1.bin osimg2.bin) do (
 :: HBIOS on the fly for testing purposes.
 ::
 
-copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin + ..\RomDsk\rom%ROMSize%_wbw.dat %ROMName%.rom || exit /b
-copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
-copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
+if %ROMSize% gtr 0 (
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin + ..\RomDsk\rom%ROMSize%_wbw.dat %ROMName%.rom || exit /b
+    copy /b hbios_rom.bin + osimg.bin + osimg1.bin + osimg2.bin %ROMName%.upd || exit /b
+    copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
+) else (
+    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.rom || exit /b
+    copy /b hbios_rom.bin + osimg_small.bin %ROMName%.upd || exit /b
+    copy /b hbios_app.bin + osimg_small.bin %ROMName%.com || exit /b
+)
 
 ::
 :: Copy results to output directory
 ::
 
-copy %ROMName%.rom ..\..\Binary || exit /b
-copy %ROMName%.upd ..\..\Binary || exit /b
-copy %ROMName%.com ..\..\Binary || exit /b
+if exist %ROMName%.rom copy %ROMName%.rom ..\..\Binary || exit /b
+if exist %ROMName%.upd copy %ROMName%.upd ..\..\Binary || exit /b
+if exist %ROMName%.com copy %ROMName%.com ..\..\Binary || exit /b
 
 goto :eof
 
@@ -188,6 +196,7 @@ call Build RCZ80 kio 512 || exit /b
 call Build RCZ80 mt 512 || exit /b
 call Build RCZ80 duart 512 || exit /b
 call Build RCZ80 zrc 512 || exit /b
+call Build RCZ80 zrc_ram 0 || exit /b
 call Build RCZ180 ext 512 || exit /b
 call Build RCZ180 nat 512 || exit /b
 call Build RCZ280 ext 512 || exit /b
@@ -202,5 +211,6 @@ call Build EZZ80 std 512 || exit /b
 call Build EZZ80 tz80 512 || exit /b
 call Build DYNO std 512 || exit /b
 call Build UNA std 512 || exit /b
+call Build RPH std 512 || exit /b
 
 goto :eof

Source/HBIOS/Build.ps1

@@ -28,7 +28,7 @@ $ErrorAction = 'Stop'
 #
 
 $PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "EZZ80", "UNA"
-$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO"
+$PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO", "RPH"
 $PlatformListZ280 = "RCZ280"
 
 #
@@ -76,8 +76,8 @@ while ($true)
 
 while ($true)
 {
-	if (($RomSize -eq 128) -or ($RomSize -eq 256) -or ($RomSize -eq 512) -or ($RomSize -eq 1024)) {break}
-	$RomSize = (Read-Host -prompt "ROM Size [128|256|512|1024]").Trim()
+	if (($RomSize -eq 0) -or ($RomSize -eq 128) -or ($RomSize -eq 256) -or ($RomSize -eq 512) -or ($RomSize -eq 1024)) {break}
+	$RomSize = (Read-Host -prompt "ROM Size [0|128|256|512|1024]").Trim()
 }
 
 #

Source/HBIOS/Build.sh

@@ -26,6 +26,8 @@ if [ "${ROM_PLATFORM}" == "dist" ] ; then
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="skz"; ROMSIZE="512"; bash Build.sh
 	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc"; ROMSIZE="512"; bash Build.sh
+	ROM_PLATFORM="RCZ80"; ROM_CONFIG="zrc_ram"; ROMSIZE="0"; bash Build.sh
+	ROM_PLATFORM="RPH"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
 	ROM_PLATFORM="SBC"; ROM_CONFIG="simh"; ROMSIZE="512"; bash Build.sh
 	ROM_PLATFORM="MBC"; ROM_CONFIG="std"; ROMSIZE="512"; bash Build.sh
@@ -71,7 +73,7 @@ if [ -z "${ROMSIZE}" ] ; then
 	ROMSIZE="512"
 fi
 
-while [ ! '(' "${ROMSIZE}" = 1024 -o "${ROMSIZE}" = 512 -o "${ROMSIZE}" = 256 -o "${ROMSIZE}" = 128 ')' ] ; do
+while [ ! '(' "${ROMSIZE}" = 1024 -o "${ROMSIZE}" = 512 -o "${ROMSIZE}" = 256 -o "${ROMSIZE}" = 128 -o "${ROMSIZE}" = 0 ')' ] ; do
 	echo -n "Romsize :"
 	read ROMSIZE
 done

Source/HBIOS/Config/RCZ80_zrc_ram.asm

@@ -0,0 +1,54 @@
+;
+;==================================================================================================
+;   RC2014 Z80 ZRC CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rcz80.asm"
+;
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+CPUOSC		.SET	7372800		; CPU OSC FREQ IN MHZ
+;
+RAMSIZE		.SET	2048		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+MEMMGR		.SET	MM_ZRC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
+;
+MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+;
+AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)

Source/HBIOS/Config/RPH_std.asm

@@ -0,0 +1,39 @@
+;
+;==================================================================================================
+;   N8 STANDARD CONFIGURATION
+;==================================================================================================
+;
+; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
+; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
+; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
+; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
+; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
+; YOUR FILE IN THE BUILD PROCESS.
+;
+; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
+; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
+; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
+; SETTINGS.
+;
+; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
+; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
+; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
+;
+; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
+; DIRECTORIES ABOVE THIS ONE).
+;
+#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
+;
+#include "cfg_rph.asm"
+;
+CPUOSC		.SET	18432000	; CPU OSC FREQ IN MHZ
+;
+INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+;
+Z180_CLKDIV	.SET	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.SET	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.SET	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+;
+CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+;
+PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Makefile

@@ -12,7 +12,7 @@ include $(TOOLS)/Makefile.inc
 
 FONTS := font8x11c.asm font8x11u.asm font8x16c.asm font8x16u.asm font8x8c.asm font8x8u.asm fontcgac.asm fontcgau.asm
 
-ifneq ($(findstring $(ROM_PLATFORM), N8 MK4 RCZ180 SCZ180 DYNO),)
+ifneq ($(findstring $(ROM_PLATFORM), N8 MK4 RCZ180 SCZ180 DYNO RPH),)
 	TASM=$(BINDIR)/uz80as -t hd64180
 endif
 
@@ -56,18 +56,26 @@ $(ROMNAME).rom $(ROMNAME).com $(ROMNAME).img &: $(ROMDEPS)
 	if [ $(ROM_PLATFORM) != UNA ] ; then \
 		cat camel80.bin nascom.bin tastybasic.bin game.bin eastaegg.bin netboot.mod updater.bin usrrom.bin >osimg1.bin ; \
 		cat imgpad2.bin >osimg2.bin ; \
-		for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
-			srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
-		done \
+		if [ $(ROMSIZE) -gt 0 ] ; then \
+			for f in hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ; do \
+				srec_cat $$f -Binary -Crop 0 0x7FFF -Checksum_Negative_Big_Endian 0x7FFF 1 1 -o $$f -Binary ; \
+			done \
+		fi \
 	fi
 	if [ $(ROM_PLATFORM) = UNA ] ; then \
 		cp osimg.bin $(DEST)/UNA_WBW_SYS.bin ; \
 		cp ../RomDsk/rom$(ROMSIZE)_una.dat $(DEST)/UNA_WBW_ROM$(ROMSIZE).bin ; \
 		cat ../UBIOS/UNA-BIOS.BIN osimg.bin ../UBIOS/FSFAT.BIN ../RomDsk/rom$(ROMSIZE)_una.dat >$(ROMNAME).rom ; \
 	else \
-		cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ../RomDsk/rom$(ROMSIZE)_wbw.dat >$(ROMNAME).rom ; \
-		cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
-		cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
+		if [ $(ROMSIZE) -gt 0 ] ; then \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin ../RomDsk/rom$(ROMSIZE)_wbw.dat >$(ROMNAME).rom ; \
+			cat hbios_rom.bin osimg.bin osimg1.bin osimg2.bin >$(ROMNAME).upd ; \
+			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
+		else \
+			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).rom ; \
+			cat hbios_rom.bin osimg_small.bin > $(ROMNAME).upd ; \
+			cat hbios_app.bin osimg_small.bin > $(ROMNAME).com ; \
+		fi \
 	fi
 
 prereq: $(FONTS) camel80.bin tastybasic.bin

Source/HBIOS/asci.asm

@@ -75,10 +75,14 @@ ASCI1_BASE	.EQU	Z180_BASE + 1	; RELATIVE TO Z180 INTERNAL IO PORTS
 ;
 ASCI_RTS	.EQU	%00010000	; ~RTS BIT OF CNTLA REG
 ;
-#IF (INTMODE == 2)
+#IF (ASCIINTS)
+;
+  #IF (INTMODE == 2)
 ;
 ASCI0_IVT	.EQU	IVT(INT_SER0)
 ASCI1_IVT	.EQU	IVT(INT_SER1)
+;
+  #ENDIF
 ;
 #ENDIF
 ;
@@ -115,25 +119,29 @@ ASCI_PREINIT2:
 	ADD	IY,DE			; BUMP IY TO NEXT ENTRY
 	DJNZ	ASCI_PREINIT0		; LOOP UNTIL DONE
 ;
-#IF (INTMODE >= 1)
+#IF (ASCIINTS)
+;
+  #IF (INTMODE >= 1)
 	; SETUP INT VECTORS AS APPROPRIATE
 	LD	A,(ASCI_DEV)		; GET DEVICE COUNT
 	OR	A			; SET FLAGS
 	JR	Z,ASCI_PREINIT3		; IF ZERO, NO ASCI DEVICES, ABORT
 ;
-#IF (INTMODE == 1)
+    #IF (INTMODE == 1)
 	; ADD IM1 INT CALL LIST ENTRY
 	LD	HL,ASCI_INT		; GET INT VECTOR
 	CALL	HB_ADDIM1		; ADD TO IM1 CALL LIST
-#ENDIF
+    #ENDIF
 ;
-#IF (INTMODE == 2)
+    #IF (INTMODE == 2)
 	; SETUP IM2 VECTORS
 	LD	HL,ASCI_INT0
 	LD	(ASCI0_IVT),HL		; IVT INDEX
 	LD	HL,ASCI_INT1
 	LD	(ASCI1_IVT),HL		; IVT INDEX
-#ENDIF
+    #ENDIF
+;
+  #ENDIF
 ;
 #ENDIF
 ;
@@ -188,7 +196,9 @@ ASCI_INIT1:
 ;
 ; RECEIVE INTERRUPT HANDLER
 ;
-#IF (INTMODE > 0)
+#IF (ASCIINTS)
+;
+  #IF (INTMODE > 0)
 ;
 ; IM1 ENTRY POINT
 ;
@@ -232,10 +242,10 @@ ASCI_INTRCV1:
 	ADD	A,8			; BUMP TO RDR PORT
 	LD	C,A			; PUT IN C, B IS STILL ZERO
 	IN	A,(C)			; READ PORT
-  #IF (ASCIBOOT != 0)
+    #IF (ASCIBOOT != 0)
 	CP	ASCIBOOT		; REBOOT REQUEST?
 	JP	Z,SYS_RESCOLD		; IF SO, DO IT, NO RETURN
-  #ENDIF
+    #ENDIF
 	LD	B,A			; SAVE BYTE READ
 	LD	L,(IY+6)		; SET HL TO
 	LD	H,(IY+7)		; ... START OF BUFFER STRUCT
@@ -292,6 +302,8 @@ ASCI_INTRCV3:
 ASCI_INTRCV4:
 	OR	$FF			; NZ SET TO INDICATE INT HANDLED
 	RET				; AND RETURN
+;
+  #ENDIF
 ;
 #ENDIF
 ;
@@ -309,7 +321,7 @@ ASCI_FNTBL:
 	.ECHO	"*** INVALID ASCI FUNCTION TABLE ***\n"
 #ENDIF
 ;
-#IF (INTMODE == 0)
+#IF ((!ASCIINTS) | (INTMODE == 0))
 ;
 ASCI_IN:
 	CALL	ASCI_IST		; CHECK FOR CHAR READY
@@ -395,7 +407,7 @@ ASCI_OUT:
 ;
 ;
 ;
-#IF (INTMODE == 0)
+#IF ((!ASCIINTS) | (INTMODE == 0))
 ;
 ASCI_IST:
 	CALL	ASCI_ICHK		; ASCI INPUT CHECK
@@ -522,7 +534,7 @@ ASCI_INITGO:
 	OUT	(C),L			; WRITE CNTLB VALUE
 	INC	C			; BUMP TO
 	INC	C			; ... STAT REG, B IS STILL 0
-#IF (INTMODE > 0)
+#IF ((ASCIINTS) & (INTMODE > 0))
 	LD	A,$08			; SET RIE BIT ON
 #ELSE
 	XOR	A			; CLEAR RIE/TIE
@@ -534,7 +546,7 @@ ASCI_INITGO:
 	LD	A,$66			; STATIC VALUE FOR ASEXT
 	OUT	(C),A			; WRITE ASEXT REG
 ;
-#IF (INTMODE > 0)
+#IF ((ASCIINTS) & (INTMODE > 0))
 ;
 	; RESET THE RECEIVE BUFFER
 	LD	E,(IY+6)
@@ -769,7 +781,7 @@ ASCI_STR_ASCIB	.DB	"ASCI W/BRG$"
 ;
 ASCI_DEV	.DB	0		; DEVICE NUM USED DURING INIT
 ;
-#IF (INTMODE == 0)
+#IF ((!ASCIINTS) | (INTMODE == 0))
 ;
 ASCI0_RCVBUF	.EQU	0
 ASCI1_RCVBUF	.EQU	0

Source/HBIOS/ay38910.asm

@@ -48,6 +48,14 @@ AY_RDAT		.EQU	$32
 AY_RIN		.EQU	$32
 #ENDIF
 ;
+#IF (AYMODE == AYMODE_MBC)
+AY_RSEL		.EQU	$A0
+AY_RDAT		.EQU	$A1
+AY_RIN		.EQU	AY_RSEL
+AY_ACR		.EQU	$A2
+AY_CLK		.SET	3579545 	; MSX NTSC COLOUR BURST FREQ = 315/88
+#ENDIF
+;
 ;======================================================================
 ;
 ;	REGISTERS
@@ -128,6 +136,10 @@ AY38910_INIT:
 	PRTS(" MODE=MSX$")
 #ENDIF
 ;
+#IF (AYMODE == AYMODE_MBC)
+	PRTS(" MODE=MBC$")
+#ENDIF
+;
 #IF (AYMODE == AYMODE_LINC)
 	PRTS(" MODE=LINC$")
 #ENDIF
@@ -136,7 +148,7 @@ AY38910_INIT:
 	LD	A,AY_RSEL
 	CALL	PRTHEXBYTE
 ;
-#IF ((AYMODE == AYMODE_SCG) | (AYMODE == AYMODE_N8))
+#IF ((AYMODE == AYMODE_SCG) | (AYMODE == AYMODE_N8) | (AYMODE == AYMODE_MBC))
 	LD	A,$FF			; ACTIVATE DEVICE BIT 4 IS AY RESET CONTROL, BIT 3 IS ACTIVE LED
 	OUT	(AY_ACR),A		; SET INIT AUX CONTROL REG
 #ENDIF

Source/HBIOS/cen.asm

@@ -0,0 +1,320 @@
+;
+;==================================================================================================
+; CENTRONICS INTERFACE DRIVER
+;==================================================================================================
+;
+; CENTRONICS-STYLE PARALLEL PRINTER DRIVER.  ASSUMES MBC PRINT BOARD
+; AS HARDWARE.
+;
+; IMPLEMENTED AS A ROMWBW CHARACTER DEVICE.  CURRENTLY HANDLES OUPUT
+; ONLY.
+;
+;  PORT 0 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | PD7   | PD6   | PD5   | PD4   | PD3   | PD2   | PD1   | PD0   |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 1 (INPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | BUSY  | ACK   | POUT  | SEL   | ERR   | 0     | 0     | 0     |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+;  PORT 2 (INPUT/OUTPUT):
+;
+;	D7	D6	D5	D4	D3	D2	D1	D0
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;     | STAT1 | STAT0 | ENBL  | PINT  | SEL   | RES   | LF    | STB   |
+;     +-------+-------+-------+-------+-------+-------+-------+-------+
+;
+CEN_NONE	.EQU	0
+CEN_MBC		.EQU	1
+;
+; PRE-CONSOLE INITIALIZATION - DETECT AND INIT HARDWARE
+;
+CEN_PREINIT:
+;
+; SETUP THE DISPATCH TABLE ENTRIES
+; NOTE: INTS WILL BE DISABLED WHEN PREINIT IS CALLED AND THEY MUST REMIAIN
+; DISABLED.
+;
+	LD	B,CEN_CFGCNT		; LOOP CONTROL
+	XOR	A			; ZERO TO ACCUM
+	LD	(CEN_DEV),A		; CURRENT DEVICE NUMBER
+	LD	IY,CEN_CFG		; POINT TO START OF CFG TABLE
+CEN_PREINIT0:
+	PUSH	BC			; SAVE LOOP CONTROL
+	CALL	CEN_INITUNIT		; HAND OFF TO UNIT INIT CODE
+	POP	BC			; RESTORE LOOP CONTROL
+;
+	LD	A,(IY+1)		; GET THE CEN TYPE DETECTED
+	OR	A			; SET FLAGS
+	JR	Z,CEN_PREINIT2		; SKIP IT IF NOTHING FOUND
+;
+	PUSH	BC			; SAVE LOOP CONTROL
+	PUSH	IY			; CFG ENTRY ADDRESS
+	POP	DE			; ... TO DE
+	LD	BC,CEN_FNTBL		; BC := FUNCTION TABLE ADDRESS
+	CALL	NZ,CIO_ADDENT		; ADD ENTRY IF CEN FOUND, BC:DE
+	POP	BC			; RESTORE LOOP CONTROL
+;
+CEN_PREINIT2:
+	LD	DE,CEN_CFGSIZ		; SIZE OF CFG ENTRY
+	ADD	IY,DE			; BUMP IY TO NEXT ENTRY
+	DJNZ	CEN_PREINIT0		; LOOP UNTIL DONE
+;
+CEN_PREINIT3:
+	XOR	A			; SIGNAL SUCCESS
+	RET				; AND RETURN
+;
+; CEN INITIALIZATION ROUTINE
+;
+CEN_INITUNIT:
+	CALL	CEN_DETECT		; DETERMINE CEN TYPE
+	LD	(IY+1),A		; SAVE IN CONFIG TABLE
+	OR	A			; SET FLAGS
+	RET	Z			; ABORT IF NOTHING THERE
+;
+	; UPDATE WORKING CEN DEVICE NUM
+	LD	HL,CEN_DEV		; POINT TO CURRENT DEVICE NUM
+	LD	A,(HL)			; PUT IN ACCUM
+	INC	(HL)			; INCREMENT IT (FOR NEXT LOOP)
+	LD	(IY),A			; UPDATE UNIT NUM
+;
+	; SET DEFAULT CONFIG
+	LD	DE,-1			; LEAVE CONFIG ALONE
+	; CALL INITDEV TO IMPLEMENT CONFIG, BUT NOTE THAT WE CALL
+	; THE INITDEV ENTRY POINT THAT DOES NOT ENABLE/DISABLE INTS!
+	JP	CEN_INITDEVX		; IMPLEMENT IT AND RETURN
+;
+;
+;
+CEN_INIT:
+	LD	B,CEN_CFGCNT		; COUNT OF POSSIBLE CEN UNITS
+	LD	IY,CEN_CFG		; POINT TO START OF CFG TABLE
+CEN_INIT1:
+	PUSH	BC			; SAVE LOOP CONTROL
+	LD	A,(IY+1)		; GET CEN TYPE
+	OR	A			; SET FLAGS
+	CALL	NZ,CEN_PRTCFG		; PRINT IF NOT ZERO
+	POP	BC			; RESTORE LOOP CONTROL
+	LD	DE,CEN_CFGSIZ		; SIZE OF CFG ENTRY
+	ADD	IY,DE			; BUMP IY TO NEXT ENTRY
+	DJNZ	CEN_INIT1		; LOOP TILL DONE
+;
+	XOR	A			; SIGNAL SUCCESS
+	RET				; DONE
+;
+; DRIVER FUNCTION TABLE
+;
+CEN_FNTBL:
+	.DW	CEN_IN
+	.DW	CEN_OUT
+	.DW	CEN_IST
+	.DW	CEN_OST
+	.DW	CEN_INITDEV
+	.DW	CEN_QUERY
+	.DW	CEN_DEVICE
+#IF (($ - CEN_FNTBL) != (CIO_FNCNT * 2))
+	.ECHO	"*** INVALID CEN FUNCTION TABLE ***\n"
+	!!!	; FORCE AN ASSEMBLY ERROR
+#ENDIF
+;
+; BYTE INTPUT
+;
+CEN_IN:
+	; INPUT NOT SUPPORTED - RETURN NULL BYTE
+	LD	E,0			; NULL BYTE
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; BYTE OUTPUT
+;
+CEN_OUT:
+	CALL	CEN_OST			; READY TO SEND?
+	JR	Z,CEN_OUT		; LOOP IF NOT
+	; *** ADD CODE TO OUTPUT BYTE ***
+	LD	A,(IY+3)
+	LD	C,A			; PORT 0 (DATA)
+ 	OUT	(C),E			; OUTPUT DATA TO PORT
+ 	call 	DELAY   		; ignore anything back after a reset
+        ld      A,%00001101             ; select & strobe, LEDS OFF
+	INC 	C 			; PUT CONTROL PORT IN C
+	INC 	C
+        OUT	(C),A			; OUTPUT DATA TO PORT
+  	call 	DELAY   		; ignore anything back after a reset
+        ld      A,%00001100             ; select, LEDS OFF
+        OUT	(C),A			; OUTPUT DATA TO PORT
+
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; INPUT STATUS
+;
+CEN_IST:
+	; INPUT NOT SUPPORTED - RETURN NOT READY
+	XOR	A			; ZERO BYTES AVAILABLE
+	RET				; DONE
+;
+; OUTPUT STATUS
+;
+CEN_OST:
+	LD	A,(IY+3)
+	LD	C,A			; PORT 0 (DATA)
+	INC 	C			; SELECT STATUS PORT
+ 	IN	A,(C)			; GET STATUS INFO
+    	AND	%10000000		; ONLY INTERESTED IN BUSY FLAG
+	RET				; DONE
+;
+; INITIALIZE DEVICE
+;
+CEN_INITDEV:
+	HB_DI				; AVOID CONFLICTS
+	CALL	CEN_INITDEVX		; DO THE REAL WORK
+	HB_EI				; INTS BACK ON
+	RET				; DONE
+;
+; THIS ENTRY POINT BYPASSES DISABLING/ENABLING INTS WHICH IS REQUIRED BY
+; PREINIT ABOVE.  PREINIT IS NOT ALLOWED TO ENABLE INTS!
+;
+CEN_INITDEVX:
+	LD	A,(IY+3)
+	LD	C,A			; PORT 0 (DATA)
+	XOR	A			; CLEAR ACCUM
+	OUT	(C),A			; SEND IT
+	INC	C			; BUMP TO
+	INC	C			; ... PORT 2
+	LD	A,%00001000		; SELECT AND ASSERT RESET, LEDS OFF
+	OUT	(C),A			; SEND IT
+ 	CALL	LDELAY			; HALF SECOND DELAY
+	LD	A,%00001100		; SELECT AND DEASSERT RESET, LEDS OFF
+	OUT	(C),A			; SEND IT
+	XOR	A			; SIGNAL SUCCESS
+	RET				; RETURN
+;
+;
+;
+CEN_QUERY:
+	LD	E,(IY+4)		; FIRST CONFIG BYTE TO E
+	LD	D,(IY+5)		; SECOND CONFIG BYTE TO D
+	XOR	A			; SIGNAL SUCCESS
+	RET				; DONE
+;
+;
+;
+CEN_DEVICE:
+	LD	D,CIODEV_CEN		; D := DEVICE TYPE
+	LD	E,(IY)			; E := PHYSICAL UNIT
+	LD	C,$40			; C := DEVICE TYPE, 0x40 IS PIO
+	LD	H,(IY+1)		; H := MODE
+	LD	L,(IY+3)		; L := BASE I/O ADDRESS
+	XOR	A			; SIGNAL SUCCESS
+	RET
+;
+; CEN DETECTION ROUTINE
+;
+CEN_DETECT:
+	LD	A,(IY+3)		; BASE PORT ADDRESS
+	ADD	A,2			; USE PORT 2 FOR DETECT
+	LD	C,A			; PUT IN C FOR I/O
+	CALL	CEN_DETECT2		; CHECK IT
+	JR	Z,CEN_DETECT1		; FOUND IT, RECORD IT
+	LD	A,CEN_NONE		; NOTHING FOUND
+	RET				; DONE
+;
+CEN_DETECT1:
+	; CEN FOUND, RECORD IT
+	LD	A,CEN_MBC		; RETURN CHIP TYPE
+	RET				; DONE
+;
+CEN_DETECT2:
+	; LOOK FOR CEN AT PORT ADDRESS IN C
+	XOR	A			; DEFAULT VALUE
+	OUT	(C),A			; SEND IT
+	IN	A,(C)			; READ IT
+	AND	%11000000		; ISOLATE STATUS BITS
+	CP	%00000000		; CORRECT VALUE?
+	RET	NZ			; IF NOT, RETURN
+	LD	A,%11000000		; STATUS BITS ON (LEDS OFF)
+	OUT	(C),A			; SEND IT
+	IN	A,(C)			; READ IT
+	AND	%11000000		; ISOLATE STATUS BITS
+	CP	%11000000		; CORRECT VALUE?
+	RET				; RETURN (ZF SET CORRECTLY)
+;
+;
+;
+CEN_PRTCFG:
+	; ANNOUNCE PORT
+	CALL	NEWLINE			; FORMATTING
+	PRTS("CEN$")			; FORMATTING
+	LD	A,(IY)			; DEVICE NUM
+	CALL	PRTDECB			; PRINT DEVICE NUM
+	PRTS(": IO=0x$")		; FORMATTING
+	LD	A,(IY+3)		; GET BASE PORT
+	CALL	PRTHEXBYTE		; PRINT BASE PORT
+
+	; PRINT THE CEN TYPE
+	CALL	PC_SPACE		; FORMATTING
+	LD	A,(IY+1)		; GET CEN TYPE BYTE
+	RLCA				; MAKE IT A WORD OFFSET
+	LD	HL,CEN_TYPE_MAP		; POINT HL TO TYPE MAP TABLE
+	CALL	ADDHLA			; HL := ENTRY
+	LD	E,(HL)			; DEREFERENCE
+	INC	HL			; ...
+	LD	D,(HL)			; ... TO GET STRING POINTER
+	CALL	WRITESTR		; PRINT IT
+;
+	; ALL DONE IF NO CEN WAS DETECTED
+	LD	A,(IY+1)		; GET CEN TYPE BYTE
+	OR	A			; SET FLAGS
+	RET	Z			; IF ZERO, NOT PRESENT
+;
+	; *** ADD MORE DEVICE INFO??? ***
+;
+	XOR	A
+	RET
+;
+;
+;
+CEN_TYPE_MAP:
+		.DW	CEN_STR_NONE
+		.DW	CEN_STR_MBC
+;
+CEN_STR_NONE	.DB	"<NOT PRESENT>$"
+CEN_STR_MBC	.DB	"MBC$"
+;
+; WORKING VARIABLES
+;
+CEN_DEV		.DB	0		; DEVICE NUM USED DURING INIT
+;
+; CEN DEVICE CONFIGURATION TABLE
+;
+CEN_CFG:
+;
+CEN0_CFG:
+	; CEN MODULE A CONFIG
+	.DB	0			; DEVICE NUMBER (SET DURING INIT)
+	.DB	0			; CEN TYPE (SET DURING INIT)
+	.DB	0			; MODULE ID
+	.DB	CEN0BASE		; BASE PORT
+	.DW	0			; LINE CONFIGURATION
+;
+CEN_CFGSIZ	.EQU	$ - CEN_CFG	; SIZE OF ONE CFG TABLE ENTRY
+;
+#IF (CENCNT >= 2)
+;
+CEN1_CFG:
+	; CEN MODULE B CONFIG
+	.DB	0			; DEVICE NUMBER (SET DURING INIT)
+	.DB	0			; CEN TYPE (SET DURING INIT)
+	.DB	1			; MODULE ID
+	.DB	CEN1BASE		; BASE PORT
+	.DW	0			; LINE CONFIGURATION
+;
+#ENDIF
+;
+CEN_CFGCNT	.EQU	($ - CEN_CFG) / CEN_CFGSIZ

Source/HBIOS/cfg_dyno.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
@@ -100,6 +100,7 @@ DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
 UARTENABLE	.EQU	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ;
 ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
 ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
 ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
@@ -125,7 +126,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DYNO	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -181,6 +182,8 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -194,7 +197,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_NONE	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_NONE	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_ezz80.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -163,7 +163,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -223,6 +223,8 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -236,7 +238,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_master.asm

@@ -12,7 +12,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -30,7 +30,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_NONE		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
@@ -60,6 +60,11 @@ N8_ACR		.EQU	$94		; N8: AUXILLARY CONTROL REGISTER (ACR) ADR
 N8_RMAP		.EQU	$96		; N8: ROM PAGE REGISTER ADR
 N8_DEFACR	.EQU	$1B		; N8: AUX CTL REGISTER DEFAULT VALUE (QUIESCIENT STATE)
 ;
+RPH_PPI0	.EQU	$88		; RPH: FIRST PARALLEL PORT REGISTERS BASE ADR
+RPH_RTC		.EQU	$84		; RPH: RTC LATCH REGISTER ADR
+RPH_ACR		.EQU	$80		; RPH: AUXILLARY CONTROL REGISTER (ACR) ADR
+RPH_DEFACR	.EQU	$00		; RPH: AUX CTL REGISTER DEFAULT VALUE (QUIESCIENT STATE)
+;
 MK4_IDE		.EQU	$80		; MK4: IDE REGISTERS BASE ADR
 MK4_XAR		.EQU	$88		; MK4: EXTERNAL ADDRESS REGISTER (XAR) ADR
 MK4_SD		.EQU	$89		; MK4: SD CARD CONTROL REGISTER ADR
@@ -153,6 +158,7 @@ UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
 UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
 ;
 ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
 ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
 ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
@@ -291,6 +297,11 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+CENCNT		.EQU	1		; CEN: NUMBER OF CHIPS TO DETECT (1-2)
+CEN0BASE	.EQU	$E8		; CEN 0: REGISTERS BASE ADR
+CEN1BASE	.EQU	$EC		; CEN 1: REGISTERS BASE ADR
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -308,7 +319,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_NONE	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_NONE	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_mbc.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
@@ -152,7 +152,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
@@ -223,6 +223,11 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	TRUE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+CENCNT		.EQU	1		; CEN: NUMBER OF CHIPS TO DETECT (1-2)
+CEN0BASE	.EQU	$E8		; CEN 0: REGISTERS BASE ADR
+CEN1BASE	.EQU	$EC		; CEN 1: REGISTERS BASE ADR
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -238,9 +243,9 @@ AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
 SN7CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
 SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
-AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
-AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_NONE	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AY38910ENABLE	.EQU	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	3579545 / 2	; DEFAULT TO CPUOSC / 4
+AYMODE		.EQU	AYMODE_MBC	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_mk4.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
@@ -122,6 +122,7 @@ UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
 UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
 ;
 ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
 ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
 ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
@@ -151,7 +152,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_DIDE	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -224,6 +225,8 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -241,7 +244,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_SCG	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_SCG	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_n8.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_N8		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 RAMLOC		.EQU	0		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 ;
@@ -124,6 +124,7 @@ UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
 UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
 ;
 ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
 ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
 ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
@@ -153,7 +154,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -222,6 +223,8 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -239,7 +242,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_N8	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_N8	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_rcz180.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
@@ -125,6 +125,7 @@ UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
 UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
 ;
 ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
 ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
 ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
@@ -169,7 +170,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -238,6 +239,8 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -251,7 +254,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_rcz280.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
@@ -185,7 +185,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -254,6 +254,8 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -267,7 +269,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_rcz80.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -174,7 +174,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -243,6 +243,8 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
@@ -256,7 +258,7 @@ SNMODE		.EQU	SNMODE_RCZ80	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_rph.asm

@@ -0,0 +1,249 @@
+;
+;==================================================================================================
+;   ROMWBW 2.X CONFIGURATION FOR RHYOPHYRE
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "RHYOPHYRE"
+;
+#INCLUDE "hbios.inc"
+;
+PLATFORM	.EQU	PLT_RPH		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
+CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	TRUE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+;
+CPUSPDCAP	.EQU	SPD_FIXED	; CPU SPEED CHANGE CAPABILITY SPD_FIXED|SPD_HILO
+CPUSPDDEF	.EQU	SPD_HIGH	; CPU SPEED DEFAULT SPD_UNSUP|SPD_HIGH|SPD_LOW
+CPUOSC		.EQU	18432000	; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
+MEMMGR		.EQU	MM_RPH		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
+RAMBIAS		.EQU	0		; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
+RAMLOC		.EQU	0		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
+;
+Z180_BASE	.EQU	$40		; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
+Z180_CLKDIV	.EQU	1		; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
+Z180_MEMWAIT	.EQU	0		; Z180: MEMORY WAIT STATES (0-3)
+Z180_IOWAIT	.EQU	1		; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
+Z180_TIMER	.EQU	TRUE		; Z180: ENABLE Z180 SYSTEM PERIODIC TIMER
+;
+RPH_PPI0	.EQU	$88		; RPH: FIRST PARALLEL PORT REGISTERS BASE ADR
+RPH_RTC		.EQU	$84		; RPH: RTC LATCH REGISTER ADR
+RPH_ACR		.EQU	$80		; RPH: AUXILLARY CONTROL REGISTER (ACR) ADR
+RPH_DEFACR	.EQU	$20		; RPH: AUX CTL REGISTER DEFAULT VALUE (QUIESCIENT STATE)
+;
+RTCIO		.EQU	RPH_RTC		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	FALSE		; ENABLE CTC PERIODIC TIMER
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
+DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
+DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+;
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	RPH_PPI0		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+UARTENABLE	.EQU	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTINTS	.EQU	FALSE		; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
+UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
+UARTSBC		.EQU	FALSE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTSBCFORCE	.EQU	FALSE		; UART: FORCE DETECTION OF SBC UART (FOR SIMH)
+UARTCAS		.EQU	FALSE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	FALSE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	FALSE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
+UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
+;
+ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
+ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
+ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
+ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
+ASCI1CFG	.EQU	DEFSERCFG	; ASCI 1: SERIAL LINE CONFIG
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+VDUSIZ		.EQU	V80X25		; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+CVDUMODE	.EQU	CVDUMODE_ECB	; CVDU: CVDU MODE: CVDUMODE_[NONE|ECB|MBC]
+CVDUMON		.EQU	CVDUMON_EGA	; CVDU: CVDU MONITOR SETUP: CVDUMON_[NONE|CGA|EGA]
+NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|RC|RCV9958|RCKBD]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_N8	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
+FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_DIO	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$20		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$20		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$28		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	FALSE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	FALSE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	RPH_PPI0	; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$00		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$00		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	RPH_PPI0	; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	FALSE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	FALSE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+;
+PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
+PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
+PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
+;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	RPH_PPI0		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+FIFO_BASE	.EQU	$0C		; UF: REGISTERS BASE ADR
+;
+SN76489ENABLE	.EQU	FALSE		; SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
+SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
+;
+AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
+AYMODE		.EQU	AYMODE_N8	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
+;
+SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
+;
+DMAENABLE	.EQU	FALSE		; DMA: ENABLE DMA DRIVER (DMA.ASM)
+DMABASE		.EQU	$E0		; DMA: DMA BASE ADDRESS
+DMAMODE		.EQU	DMAMODE_Z180	; DMA: DMA MODE (NONE|ECB|Z180|Z280|RC|MBC)

Source/HBIOS/cfg_sbc.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
@@ -152,7 +152,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
@@ -223,6 +223,8 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
@@ -240,7 +242,7 @@ SNMODE		.EQU	SNMODE_VGM	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_SCG	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_SCG	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_scz180.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_115200_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z180		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 RAMLOC		.EQU	19		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
 RAMBIAS		.EQU	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
 ;
@@ -120,6 +120,7 @@ UARTRC		.EQU	TRUE		; UART: AUTO-DETECT RC UART
 UARTDUAL	.EQU	FALSE		; UART: AUTO-DETECT DUAL UART
 ;
 ASCIENABLE	.EQU	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+ASCIINTS	.EQU	TRUE		; ASCI: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
 ASCISWAP	.EQU	FALSE		; ASCI: SWAP CHANNELS
 ASCIBOOT	.EQU	0		; ASCI: REBOOT ON RCV CHAR (0=DISABLED)
 ASCI0CFG	.EQU	DEFSERCFG	; ASCI 0: SERIAL LINE CONFIG
@@ -164,7 +165,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -228,6 +229,8 @@ PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (P
 ;
 HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
@@ -246,7 +249,7 @@ SNMODE		.EQU	SNMODE_NONE	; DRIVER MODE: SNMODE_[NONE|RC2014|VGM]
 ;
 AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
 AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
-AYMODE		.EQU	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
+AYMODE		.EQU	AYMODE_RCZ180	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC]
 ;
 SPKENABLE	.EQU	FALSE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
 ;

Source/HBIOS/cfg_una.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "../UBIOS/ubios.inc"
 ;
-;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+;PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE

Source/HBIOS/cfg_zeta.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_SBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
@@ -167,6 +167,8 @@ PIOCNT		.EQU	2		; PIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
 PIO0BASE	.EQU	$B8		; PIO 0: REGISTERS BASE ADR
 PIO1BASE	.EQU	$BC		; PIO 1: REGISTERS BASE ADR
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/cfg_zeta2.asm

@@ -15,7 +15,7 @@
 ;
 #INCLUDE "hbios.inc"
 ;
-PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -33,7 +33,7 @@ DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
 ;
 RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
 ROMSIZE_CHK	.EQU	0		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
-MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MEMMGR		.EQU	MM_Z2		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC|RPH]
 MPGSEL_0	.EQU	$78		; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_1	.EQU	$79		; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
 MPGSEL_2	.EQU	$7A		; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
@@ -135,7 +135,7 @@ MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
 MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
 MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
 MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
-MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM
 ;
 FDENABLE	.EQU	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.EQU	FDMODE_ZETA2	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
@@ -175,6 +175,8 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIOENABLE	.EQU	FALSE		; PIO: ENABLE ZILOG PIO DRIVER (PIO.ASM)
 ;
+CENENABLE	.EQU	FALSE		; CEN: ENABLE CENTRONICS DRIVER (CEN.ASM)
+;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP

Source/HBIOS/dsrtc.asm

@@ -66,28 +66,28 @@
 ; RTC LATCH WRITE
 ; ---------------
 ;
-; BIT	SBC	SBC-004	MFPIC	N8	N8-CSIO	MK4	SC130	SC131	SC126		MBC
-; -----	-------	-------	-------	-------	-------	-------	-------	-------	---------------	-------
-; D7	RTC_OUT RTC_OUT	--	RTC_OUT RTC_OUT	RTC_OUT	--	--	RTC_OUT,I2C_SDA	RTC_OUT
-; D6	RTC_CLK RTC_CLK	--	RTC_CLK RTC_CLK	RTC_CLK	--	--	RTC_CLK		RTC_CLK
-; D5	/RTC_WE /RTC_WE	--	/RTC_WE /RTC_WE	/RTC_WE	--	--	/RTC_WE		/RTC_WE
-; D4	RTC_CE	RTC_CE	--	RTC_CE  RTC_CE	RTC_CE	--	--	RTC_CE		RTC_CE
-; D3	NC	CLKSEL	/RTC_CE	NC	NC	NC	--	--	/SPI_CS2	CLKSEL
-; D2	NC	SPK	RTC_CLK	SPI_CS	SPI_CS	NC	/SPI_CS1/SPI_CS1/SPI_CS1	SPK
-; D1	--	--	RTC_WE	SPI_CLK	NC	NC	--	--	FS		LED1
-; D0	--	--	RTC_OUT	SPI_DI	NC	NC	--	--	I2C_SCL		LED0
+; BIT	SBC	SBC-004	MFPIC	N8	N8-CSIO	MK4	SC130	SC131	SC126		MBC	RPH	
+; -----	-------	-------	-------	-------	-------	-------	-------	-------	---------------	------- -------	
+; D7	RTC_OUT RTC_OUT	--	RTC_OUT RTC_OUT	RTC_OUT	--	--	RTC_OUT,I2C_SDA	RTC_OUT RTC_OUT 
+; D6	RTC_CLK RTC_CLK	--	RTC_CLK RTC_CLK	RTC_CLK	--	--	RTC_CLK		RTC_CLK RTC_CLK 
+; D5	/RTC_WE /RTC_WE	--	/RTC_WE /RTC_WE	/RTC_WE	--	--	/RTC_WE		/RTC_WE /RTC_WE 
+; D4	RTC_CE	RTC_CE	--	RTC_CE  RTC_CE	RTC_CE	--	--	RTC_CE		RTC_CE  RTC_CE	
+; D3	NC	CLKSEL	/RTC_CE	NC	NC	NC	--	--	/SPI_CS2	CLKSEL  NC	
+; D2	NC	SPK	RTC_CLK	SPI_CS	SPI_CS	NC	/SPI_CS1/SPI_CS1/SPI_CS1	SPK     NC	
+; D1	--	--	RTC_WE	SPI_CLK	NC	NC	--	--	FS		LED1    NC	
+; D0	--	--	RTC_OUT	SPI_DI	NC	NC	--	--	I2C_SCL		LED0    NC	
 ;
 ; RTC LATCH READ
 ; --------------
 ;
-; D7	--	--	--	--	--	--	--	--	I2C_SDA		--
-; D6	CFG	CFG	--	SPI_DO	CFG	--	--	--	--		CFG
-; D5	--	--	--	--	--	--	--	--	--		--
-; D4	--	--	--	--	--	--	--	--	--		--
-; D3	--	--	--	--	--	--	--	--	--		--
-; D2	--	--	--	--	--	--	--	--	--		--
-; D1	----	--	--	--	--	--	--	--	--		CLKSEL
-; D0	RTC_IN	RTC_IN	RTC_IN	RTC_IN	RTC_IN	RTC_IN	--	--	RTC_IN		RTC_IN
+; D7	--	--	--	--	--	--	--	--	I2C_SDA		--	--
+; D6	CFG	CFG	--	SPI_DO	CFG	--	--	--	--		CFG	--
+; D5	--	--	--	--	--	--	--	--	--		--	--
+; D4	--	--	--	--	--	--	--	--	--		--	--
+; D3	--	--	--	--	--	--	--	--	--		--	--
+; D2	--	--	--	--	--	--	--	--	--		--	--
+; D1	----	--	--	--	--	--	--	--	--		CLKSEL	--
+; D0	RTC_IN	RTC_IN	RTC_IN	RTC_IN	RTC_IN	RTC_IN	--	--	RTC_IN		RTC_IN	RTC_IN
 ;
 #IF (DSRTCMODE == DSRTCMODE_STD)
 ;

Source/HBIOS/hbios.asm

@@ -513,7 +513,7 @@ HBX_BNKSEL1:
 	BIT	7,A			; BIT 7 SET REQUESTS RAM PAGE
 	JR	Z,HBX_ROM		; NOT SET, SELECT ROM PAGE
 	RES	7,A			; RAM PAGE REQUESTED: CLEAR ROM BIT
-	ADD	A,$10			; ADD 16 x 32K - RAM STARTS FROM 512K
+	ADD	A,ROMSIZE / 32		; STARTING RAM BANK NUMBER OFFSET
 ;
 HBX_ROM:
 	OUT	($1F),A			; HCS WRITE TO THE BANK CONTROL REGISTER
@@ -556,6 +556,28 @@ HBX_RAMX:
 HBX_MMA	.DB	0			; TEMPORARY STORAGE FOR REG A
 #ENDIF
 ;
+#IF (MEMMGR == MM_RPH)
+	BIT	7,A			; TEST BIT 7 FOR RAM VS. ROM
+	JR	Z,HBX_ROM		; IF NOT SET, SELECT ROM PAGE
+;
+HBX_RAM:
+	AND	%00011111		; AVOID WRAPPING BITS
+	RLCA				; SCALE SELECTOR TO
+	RLCA				; ... GO FROM Z180 4K PAGE SIZE
+	RLCA				; ... TO DESIRED 32K PAGE SIZE
+	OUT0	(Z180_BBR),A		; WRITE TO BANK BASE
+	LD	A,RPH_DEFACR | 80H	; SELECT RAM BY SETTING BIT 7
+	OUT0	(RPH_ACR),A		; ... IN RPH ACR REGISTER
+	RET				; DONE
+;
+HBX_ROM:
+	OR	RPH_DEFACR		; COMBINE WITH DEFAULT BITS
+	OUT0	(RPH_ACR),A		; BANK INDEX TO RPH ACR REGISTER
+	XOR	A			; ZERO ACCUM
+	OUT0	(Z180_BBR),A		; ZERO BANK BASE
+	RET				; DONE
+#ENDIF
+;
 ;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 ; Copy Data - Possibly between banks.  This resembles CP/M 3, but
 ;  usage of the HL and DE registers is reversed.
@@ -1101,6 +1123,11 @@ Z280_BOOTERR	.TEXT	"\r\n\r\n*** Application mode boot not supported under Z280 n
 	OUT0	(N8_ACR),A		; ... REGISTER IS INITIALIZED
 #ENDIF
 ;
+#IF (PLATFORM == PLT_RPH)
+	LD	A,RPH_DEFACR		; ENSURE RPH ACR
+	OUT0	(RPH_ACR),A		; ... REGISTER IS INITIALIZED
+#ENDIF
+;
 #IF (DIAGENABLE)
 	LD	A,%00000001
 	OUT	(DIAGPORT),A
@@ -1238,7 +1265,7 @@ Z280_INITZ:
 	LD	A,$F0
 	OUT0	(Z180_DCNTL),A
 
-  #IF ((MEMMGR == MM_Z180) | (MEMMGR == MM_N8))
+  #IF ((MEMMGR == MM_Z180) | (MEMMGR == MM_N8) | (MEMMGR == MM_RPH))
 	; Z180 MMU SETUP
 	LD	A,$80
 	OUT0	(Z180_CBAR),A		; SETUP FOR 32K/32K BANK CONFIG
@@ -1530,16 +1557,60 @@ MBC_SINGLE:
 ;
 #ENDIF
 ;
-; IF THIS IS NOT A ROMBOOT, THEN WE NEED TO COPY THE "APP" BANK TO
-; TPA.  IT IS DONE PRIOR TO COPYING HBIOS TO IT'S FINAL BANK BECAUSE
-; THE SOURCE OF THE APP BANK CODE MAY BE THE BANK THAT HBIOS WANTS TO
-; USE AS IT'S FINAL LOCATION (PRIMARILY IN CASE OF RAMBOOT WHERE THE
-; SYSTEM HAS THE MINIMUM 128KB OF RAM).
+; IF THIS IS A ROM-LESS SYSTEM, THEN WE NEED TO COPY THE PAYLOAD
+; (LOADER, MONITOR, ZSDOS) THAT HAS BEEN LOADED TO PHYSICAL RAM
+; BANKS 0 AND 1 TO THE USER TPA BANK TO RUN AFTER BOOT.
+; IT IS DONE PRIOR TO COPYING HBIOS TO IT'S FINAL BANK BECAUSE
+; THE PAYLOAD MAY EXTEND INTO THE HBIOS OPERATING BANK.  THIS
+; HAPPENS PRIMARILY IN THE CASE WHERE THE
+; SYSTEM HAS THE MINIMUM 128KB OF RAM.
 ;
-
-
-
-
+#IFDEF ROMBOOT
+  #IF (ROMSIZE == 0)
+ ; 
+	; THE PAYLOAD IS LIKELY TO CROSS OVER THE RAM BANK 0/1
+	; BOUNDARY.  BNKCPY DOES NOT HANDLE THIS BECAUSE IT ASSUMES
+	; THE COMMON BANK IS USED AFTER PASSING OVER THE BANK
+	; BOUNDARY.  WE WORK AROUND THAT HERE BY DOING TWO COPIES.
+	; THE FIRST ONE HANDLES THE PORTION OF THE PAYLOAD FROM THE
+	; END OF HBIOS TO THE BANK BOUNDARY ($8000).  THE SECOND
+	; ONE HANDLES THE PORTION THAT EXTENDS INTO THE SECOND
+	; PHYSICAL RAM BANK.
+;
+	; COPY PORTION OF PAYLOAD FOLLOWING HBIOS TO THE BANK
+	; BOUNDARY AT $8000 INTO START OF TPA.
+	LD	A,BID_RAM0
+	LD	(HB_SRCBNK),A
+	LD	A,BID_USR
+	LD	(HB_DSTBNK),A
+	LD	HL,HB_END
+	LD	DE,0
+	LD	BC,$8000-HB_END
+;
+    #IF (MEMMGR == MM_Z280)
+	CALL	Z280_BNKCPY
+    #ELSE
+	CALL	HBX_BNKCPY
+    #ENDIF
+;
+	; COPY REMAINDER OF PAYLOAD EXTENDING INTO THE SECOND PHYSICAL
+	; RAM BANK.  NOTE THAT THE DESTINATION ADDRESS (DE) IS
+	; ALREADY CORRECT FROM THE PRIOR COPY.
+	LD	A,BID_RAM0+1
+	LD	(HB_SRCBNK),A
+	LD	HL,$0000
+	; DE IS ALREADY CORRECT
+	LD	BC,$8000-($8000-HB_END)
+;
+    #IF (MEMMGR == MM_Z280)
+	CALL	Z280_BNKCPY
+    #ELSE
+	CALL	HBX_BNKCPY
+    #ENDIF
+;
+  #ENDIF
+;
+#ENDIF
 ;
 ; IF ALREADY EXECUTING IN RAM, BYPASS RAM BANK INSTALLATION
 ;
@@ -2375,6 +2446,9 @@ HB_Z280BUS1:
 #ENDIF
 #IF (MEMMGR == MM_MBC)
 	.TEXT	"MBC$"
+#ENDIF
+#IF (MEMMGR == MM_RPH)
+	.TEXT	"RPH$"
 #ENDIF
 	CALL	PRTSTRD
 	.TEXT	" MMU$"
@@ -2450,6 +2524,7 @@ HB_Z280BUS1:
 #ENDIF
 ;
 #IFDEF ROMBOOT
+  #IF (ROMSIZE > 0)
 ;
 ; ROM CHECKSUM VERIFICATION
 ; EACH OF THE FIRST 4 ROM BANKS HAS A CHECKSUM INJECTED SUCH THAT
@@ -2520,6 +2595,7 @@ HB_CKBNKSIZ	.EQU	$-HB_CKBNK	; SIZE OF ROUTINE
 ;
 HB_ROMCKZ:
 ;
+  #ENDIF
 #ENDIF
 ;
 ; LOW BATTERY DIAGNOSTIC MESSAGE
@@ -2723,15 +2799,8 @@ INITSYS4:
 	LDCTL	(C),HL
 #ENDIF
 ;
-; CHAIN TO OS LOADER
+#IFNDEF ROMBOOT
 ;
-#IFDEF ROMBOOT
-	; PERFORM BANK CALL TO OS IMAGES BANK IN ROM
-	LD	A,BID_IMG0		; CHAIN TO OS IMAGES BANK
-	LD	IX,0			; ENTER AT ADDRESS 0
-	CALL	HBX_BNKCALL		; GO THERE
-	HALT				; WE SHOULD NEVER COME BACK!
-#ELSE
 	; COPY OS IMAGE: BID_USR:<IMG START> --> BID_USR:0
 	LD	B,BF_SYSSETCPY		; HBIOS FUNC: SETUP BANK COPY
 	LD	D,BID_USR		; D = DEST BANK = USER BANK
@@ -2745,16 +2814,23 @@ INITSYS4:
 	LD	DE,0			; TO USER ADDRESS 0
 	RST	08			; DO IT
 ;
-	; PERFORM BANK CALL TO USER BANK
-	LD	A,BID_USR		; CHAIN TO OS IMAGES BANK
+#ENDIF
+;
+; CHAIN TO LOADER
+;
+#IFDEF ROMBOOT
+  #IF (ROMSIZE > 0)
+	LD	A,BID_IMG0		; CHAIN TO OS IMAGES BANK
+  #ELSE
+	LD	A,BID_USR		; CHAIN TO USER BANK
+  #ENDIF
+#ELSE
+	LD	A,BID_USR		; CHAIN TO USER BANK
+#ENDIF
 	LD	IX,0			; ENTER AT ADDRESS 0
 	CALL	HBX_BNKCALL		; GO THERE
 	HALT				; WE SHOULD NEVER COME BACK!
 ;
-#ENDIF
-;
-	RET
-;
 ;	CALL A LIST OF ROUTINES POINTED TO BY DE OF LENGTH B.
 ;
 CALLLIST:
@@ -2828,6 +2904,9 @@ HB_PCINITTBL:
 #IF (PIOENABLE)
 	.DW	PIO_PREINIT
 #ENDIF
+#IF CENENABLE)
+	.DW	CEN_PREINIT
+#ENDIF
 #IF (PIO_4P | PIO_ZP)
 	.DW	PIO_PREINIT
 #ENDIF
@@ -2950,6 +3029,9 @@ HB_INITTBL:
 #IF (PIOENABLE)
 	.DW	PIO_INIT
 #ENDIF
+#IF (CENENABLE)
+	.DW	CEN_INIT
+#ENDIF
 #IF (PIO_4P | PIO_ZP)
 	.DW	PIO_INIT
 #ENDIF
@@ -3681,6 +3763,11 @@ SYS_RESINT:
 ; GO BACK TO ROM BOOT LOADER
 ;
 SYS_RESWARM:
+;
+#IF (ROMSIZE == 0)
+	JR	SYS_RESCOLD
+#ENDIF
+;
 	CALL	SYS_RESINT
 ;
 #IF (MEMMGR == MM_Z280)
@@ -3697,6 +3784,14 @@ SYS_RESWARM:
 ; RESTART SYSTEM AS THOUGH POWER HAD JUST BEEN TURNED ON
 ;
 SYS_RESCOLD:
+;
+#IF (ROMSIZE == 0)
+	LD	DE,STR_RESTART
+	CALL	Z,WRITESTR
+	DI
+	HALT
+#ENDIF
+;
 #IF (MEMMGR == MM_Z280)
 	JP	Z280_RESTART
 #ELSE
@@ -5912,6 +6007,15 @@ SIZ_PIO		.EQU	$ - ORG_PIO
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (CENENABLE)
+ORG_CEN		.EQU	$
+  #INCLUDE "cen.asm"
+SIZ_CEN		.EQU	$ - ORG_CEN
+		.ECHO	"CEN occupies "
+		.ECHO	SIZ_CEN
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (PIO_4P | PIO_ZP | PIO_SBC)
 ORG_PIO		.EQU	$
   #INCLUDE "pio.asm"
@@ -6753,7 +6857,7 @@ PS_FLP_DSTR:	.TEXT	"SD$"		; PS_FLPSD
 ;
 PS_SDSTRREF:
 	.DW	PS_SDUART, PS_SDASCI, PS_SDTERM, PS_SDPRPCON, PS_SDPPPCON
-	.DW	PS_SDSIO, PS_SDACIA, PS_SDPIO, PS_SDUF, PS_SDDUART, PS_SDZ2U
+	.DW	PS_SDSIO, PS_SDACIA, PS_SDPIO, PS_SDUF, PS_SDDUART, PS_SDZ2U, PS_SDCEN
 ;
 PS_SDUART	.TEXT	"UART$"
 PS_SDASCI	.TEXT	"ASCI$"
@@ -6766,6 +6870,7 @@ PS_SDPIO	.TEXT	"PIO$"
 PS_SDUF		.TEXT	"UF$"
 PS_SDDUART	.TEXT	"DUART$"
 PS_SDZ2U	.TEXT	"Z2U$"
+PS_SDCEN	.TEXT	"CEN$"
 ;
 ; CHARACTER SUB TYPE STRINGS
 ;
@@ -6999,6 +7104,7 @@ STR_LOWBAT	.DB	"\r\n\r\n+++ LOW BATTERY +++$"
 STR_PANIC	.TEXT	"\r\n>>> PANIC: $"
 STR_SYSCHK	.TEXT	"\r\n>>> SYSCHK: $"
 STR_CONTINUE	.TEXT	"\r\nContinue (Y/N)? $"
+STR_RESTART	.TEXT	"\r\n\r\n>>> Press hardware reset button to restart system\r\n\r\n$"
 ;
 #IF (DSKYENABLE)	;	'H','B','I','O',' ',' ',' ',' '
   #IF (DSKYMODE == DSKYMODE_V1)
@@ -7025,7 +7131,9 @@ SLACK		.EQU	BNKTOP - $
 		.ECHO	" bytes.\n"
 ;
 #IFDEF ROMBOOT
+  #IF (ROMSIZE > 0)
 		.FILL	SLACK
+  #ENDIF
 #ENDIF
 ;
 		.END

Source/HBIOS/hbios.inc

@@ -136,6 +136,7 @@ PLT_SCZ180	.EQU	10		; SCZ180
 PLT_DYNO	.EQU	11		; DYNO MICRO-ATX MOTHERBOARD
 PLT_RCZ280	.EQU	12		; RC2014 W/ Z280
 PLT_MBC		.EQU	13		; MULTI BOARD COMPUTER
+PLT_RPH		.EQU	14		; RHYOPHYRE GRAPHICS COMPUTER
 ;
 ; HBIOS GLOBAL ERROR RETURN VALUES
 ;
@@ -182,6 +183,7 @@ CIODEV_PIO	.EQU	$70
 CIODEV_UF	.EQU	$80
 CIODEV_DUART	.EQU	$90
 CIODEV_Z2U	.EQU	$A0
+CIODEV_CEN	.EQU	$B0
 ;
 ; SUB TYPES OF CHAR DEVICES
 ;

Source/HBIOS/std.asm

@@ -15,6 +15,7 @@
 ; 11. DYNO	Steve Garcia's Dyno Micro-ATX Motherboard
 ; 12. RCZ280	Z280 CPU on RC2014 or ZZ80MB
 ; 13. MBC	Andrew Lynch's Multi Board Computer
+; 14. RPH	Andrew Lynch's RHYOPHYRE Graphics Computer
 
 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
 ;
@@ -70,6 +71,7 @@ MM_Z180		.EQU	4		; Z180 NATIVE MEMORY MANAGER
 MM_Z280		.EQU	5		; Z280 NATIVE MEMORY MANAGER
 MM_ZRC		.EQU	6		; ZRC BANK SWITCHING
 MM_MBC		.EQU	7		; MBC MEMORY MANAGER
+MM_RPH		.EQU	8		; Z180 WITH RPH EXTENSIONS
 ;
 ; BOOT STYLE
 ;
@@ -170,6 +172,7 @@ PPIDEMODE_MFP	.EQU	3		; MULTIFUNCTION / PIC
 PPIDEMODE_N8	.EQU	4		; MULTIFUNCTION / PIC
 PPIDEMODE_RC	.EQU	5		; RC2014 PPIDE MODULE @ $20 (ED BRINDLEY)
 PPIDEMODE_DYNO	.EQU	6		; DYNO PPIDE @ $4C
+PPIDEMODE_RPH	.EQU	7		; RHYOPHYRE (RPH)
 ;
 ; SD MODE SELECTIONS
 ;
@@ -193,6 +196,7 @@ AYMODE_RCZ80	.EQU	3		; RC2014 SOUND MODULE BY ED BRINDLEY ON Z80
 AYMODE_RCZ180	.EQU	4		; RC2014 SOUND MODULE BY ED BRINDLEY ON Z180
 AYMODE_MSX	.EQU	5		; RC2014 SOUND MODULE REV6 BY ED BRINDLEY ON Z80/Z180 AT MSX PORTS
 AYMODE_LINC	.EQU	6		; LINC Z50 AY SOUND CARD
+AYMODE_MBC	.EQU	7		; MBC SOUND BOARD
 ;
 ; SN SOUND CHIP MODE SELECTIONS
 ; 
@@ -528,6 +532,10 @@ BID_IMG2	.EQU	BID_ROM0 + 3	; NETWORK BOOT				-+ ROM BANKS
 BID_ROMD0	.EQU	BID_ROM0 + 4	; FIRST ROM DRIVE BANK			 |  ROM
 BID_ROMDN	.EQU	BID_ROMN	; LAST ROM DRIVE BANK			 V  DRIVE
 ;
+#IF (ROMSIZE == 0)
+BID_BOOT	.SET	BID_RAM0	; SPECIAL CASE ROM-LESS SYSTEM
+#ENDIF
+;
 #IF (BIOS == BIOS_WBW)
 ;
   #IF (!MDRAM)

Source/ZRC/Build.cmd

@@ -1,8 +1,38 @@
 @echo off
 setlocal
 
-if not exist ..\..\Binary\RCZ80_zrc.rom goto :eof
+set TOOLS=../../Tools
 
-copy /b zrc_cfldr.bin + zrc_ptbl.bin + zrc_fill_1.bin + zrc_mon.bin + zrc_fill_2.bin + ..\..\Binary\RCZ80_zrc.rom + zrc_fill_3.bin ..\..\Binary\hd1024_zrc_prefix.dat || exit /b
+set PATH=%TOOLS%\srecord;%PATH%
 
-copy /b ..\..\Binary\hd1024_zrc_prefix.dat + ..\..\Binary\hd1024_cpm22.img + ..\..\Binary\hd1024_zsdos.img + ..\..\Binary\hd1024_nzcom.img + ..\..\Binary\hd1024_cpm3.img + ..\..\Binary\hd1024_zpm3.img + ..\..\Binary\hd1024_ws4.img ..\..\Binary\hd1024_zrc_combo.img || exit /b
+if exist ..\..\Binary\RCZ80_zrc.rom call :build_zrc
+
+if exist ..\..\Binary\RCZ80_zrc_ram.rom call :build_zrc_ram
+
+goto :eof
+
+:build_zrc
+
+srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ80_zrc.rom -binary -offset 0x24000 -o temp.dat -binary
+move temp.dat ..\..\Binary\hd1024_zrc_prefix.dat
+
+copy /b ..\..\Binary\hd1024_zrc_prefix.dat + ..\..\Binary\hd1024_cpm22.img + ..\..\Binary\hd1024_zsdos.img + ..\..\Binary\hd1024_nzcom.img + ..\..\Binary\hd1024_cpm3.img + ..\..\Binary\hd1024_zpm3.img + ..\..\Binary\hd1024_ws4.img ..\..\Binary\hd1024_zrc_combo.img || exit /b
+
+goto :eof
+
+:build_zrc_ram
+
+srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+srec_cat temp.dat -binary -exclude 0x24000 0xA4000 ..\..\Binary\RCZ80_zrc_ram.rom -binary -offset 0x24000 -o temp.dat -binary
+move temp.dat ..\..\Binary\hd1024_zrc_ram_prefix.dat
+
+copy /b ..\..\Binary\hd1024_zrc_ram_prefix.dat + ..\..\Binary\hd1024_cpm22.img + ..\..\Binary\hd1024_zsdos.img + ..\..\Binary\hd1024_nzcom.img + ..\..\Binary\hd1024_cpm3.img + ..\..\Binary\hd1024_zpm3.img + ..\..\Binary\hd1024_ws4.img ..\..\Binary\hd1024_zrc_ram_combo.img || exit /b
+
+goto :eof

Source/ZRC/Makefile

@@ -1,6 +1,9 @@
 HD1024ZRCPREFIX = hd1024_zrc_prefix.dat
 HD1024ZRCCOMBOIMG = hd1024_zrc_combo.img
+HD1024ZRCRAMPREFIX = hd1024_zrc_ram_prefix.dat
+HD1024ZRCRAMCOMBOIMG = hd1024_zrc_ram_combo.img
 ZRCROM = ../../Binary/RCZ80_zrc.rom
+ZRCRAMROM = ../../Binary/RCZ80_zrc_ram.rom
 HD1024IMGS = ../../Binary/hd1024_cpm22.img ../../Binary/hd1024_zsdos.img ../../Binary/hd1024_nzcom.img \
 	../../Binary/hd1024_cpm3.img ../../Binary/hd1024_zpm3.img ../../Binary/hd1024_ws4.img
 
@@ -10,6 +13,10 @@ ifneq ($(wildcard $(ZRCROM)),)
 	OBJECTS += $(HD1024ZRCPREFIX) $(HD1024ZRCCOMBOIMG)
 endif
 
+ifneq ($(wildcard $(ZRCRAMROM)),)
+	OBJECTS += $(HD1024ZRCRAMPREFIX) $(HD1024ZRCRAMCOMBOIMG)
+endif
+
 DEST=../../Binary
 
 TOOLS = ../../Tools
@@ -19,7 +26,23 @@ include $(TOOLS)/Makefile.inc
 DIFFPATH = $(DIFFTO)/Binary
 
 $(HD1024ZRCPREFIX):
-	cat zrc_cfldr.bin zrc_ptbl.bin zrc_fill_1.bin zrc_mon.bin zrc_fill_2.bin $(ZRCROM) zrc_fill_3.bin >$@
+	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZRCROM) -binary -offset 0x24000 -o temp.dat -binary
+	mv temp.dat $@
+
+$(HD1024ZRCRAMPREFIX):
+	srec_cat -generate 0x0 0x100000 --constant 0x00 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x0 0x100 zrc_cfldr.bin -binary -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x100 0x200 zrc_ptbl.bin -binary -offset 0x100 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x1F000 0x20000 zrc_mon.bin -binary -offset 0x1F000 -o temp.dat -binary
+	srec_cat temp.dat -binary -exclude 0x24000 0xA4000 $(ZRCRAMROM) -binary -offset 0x24000 -o temp.dat -binary
+	mv temp.dat $@
 
 $(HD1024ZRCCOMBOIMG): $(HD1024ZRCPREFIX) $(HD1024IMGS)
-	cat $^ > $@
+	cat $^ > $@
+
+$(HD1024ZRCRAMCOMBOIMG): $(HD1024ZRCRAMPREFIX) $(HD1024IMGS)
+	cat $^ > $@

Source/ver.inc

@@ -2,4 +2,4 @@
 #DEFINE	RMN	1
 #DEFINE	RUP	1
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.1.1-pre.160"
+#DEFINE BIOSVER	"3.1.1-pre.167"

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	1
 rup	equ	1
 rtp	equ	0
 biosver	macro
-	db	"3.1.1-pre.160"
+	db	"3.1.1-pre.167"
 	endm