;
;==================================================================================================
;   ROMWBW DEFAULT BUILD SETTINGS FOR RCBUS Z80 K80W
;==================================================================================================
;
; THIS FILE DEFINES THE DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
; INDICATED ABOVE.  THESE SETTINGS DEFINE THE OFFICIAL BUILD FOR THIS
; PLATFORM AS DISTRIBUTED IN ROMWBW RELEASES.
;
; ROMWBW USES CASCADING CONFIGURATION FILES AS INDICATED BELOW:
;
; cfg_MASTER.asm			- MASTER: CONFIGURATION FILE DEFINES ALL POSSIBLE ROMWBW SETTINGS
; |
; +-> cfg_<platform>.asm		- PLATFORM: DEFAULT SETTINGS FOR SPECIFIC PLATFORM
;     |
;     +-> Config/<plt>_std.asm		- BUILD: SETTINGS FOR EACH OFFICIAL DIST BUILD
;         |
;         +-> Config/<plt>_<cust>.asm	- USER: CUSTOM USER BUILD SETTINGS
;
; THE TOP (MASTER CONFIGURATION) FILE DEFINES ALL POSSIBLE ROMWBW
; CONFIGURATION SETTINGS. EACH FILE BELOW THE MASTER CONFIGURATION FILE
; INHERITS THE CUMULATIVE SETTINGS OF THE FILES ABOVE IT AND MAY
; OVERRIDE THESE SETTINGS AS DESIRED.
;
; OTHER THAN THE TOP MASTER FILE, EACH FILE MUST "#INCLUDE" ITS PARENT
; FILE (SEE #INCLUDE STATEMENT BELOW).  THE TOP TWO FILES SHOULD NOT BE
; MODIFIED.
;
; TO CUSTOMIZE YOUR BUILD SETTINGS YOU SHOULD MODIFY THIS FILE, THE
; DEFAULT BUILD SETTINGS (Config/<platform>_std.asm) OR PREFERABLY
; CREATE AN OPTIONAL CUSTOM USER SETTINGS FILE THAT INCLUDES THE DEFAULT
; BUILD SETTINGS FILE (SEE EXAMPLE Config/SBC_user.asm).
;
; BY CREATING A CUSTOM USER SETTINGS FILE, YOU ARE LESS LIKELY TO BE
; IMPACTED BY FUTURE CHANGES BECAUSE YOU WILL BE INHERITING MOST
; OF YOUR SETTINGS WHICH WILL BE UPDATED BY AUTHORS AS ROMWBW EVOLVES.
;
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE
; SOURCE DIRECTORY (TWO DIRECTORIES ABOVE THIS ONE).
;
; *** WARNING: ASIDE FROM THE MASTER CONFIGURATION FILE, YOU MUST USE
; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
;
#DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
;
#INCLUDE "Config/RCZ80_std.asm"
;
INTMODE		.SET	2		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
;
CPUOSC		.SET	22000000	; CPU OSC FREQ IN MHZ
;
KIOENABLE	.SET	TRUE		; ENABLE ZILOG KIO SUPPORT
CTCENABLE	.SET	TRUE		; ENABLE ZILOG CTC SUPPORT
CTCBASE		.SET	KIOBASE+$04	; CTC BASE I/O ADDRESS
CTCOSC		.SET	1843200		; CTC CLOCK FREQUENCY
;
DSRTCMODE	.SET	DSRTCMODE_K80W	; DSRTC: OPERATING MODE: DSRTCMODE_[STD|MFPIC|K80W]
;
ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
;
SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
SIO0MODE	.SET	SIOMODE_STD	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP|Z80R]
SIO0BASE	.SET	KIOBASE+$08	; SIO 0: REGISTERS BASE ADR
SIO0ACLK	.SET	CTCOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
SIO0BCLK	.SET	CTCOSC		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
;
VRCENABLE	.SET	TRUE		; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
;
SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDMODE		.SET	SDMODE_K80W	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT|USR|PIO|Z80R|EPITX|FZ80|GM|EZ512|K80W]
SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT ONLY