;
;==================================================================================================
;   SBC STANDARD CONFIGURATION
;==================================================================================================
;
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
; YOUR FILE IN THE BUILD PROCESS.
;
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
; SETTINGS.
;
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
;
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
; DIRECTORIES ABOVE THIS ONE).
;
#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
;
#include "cfg_sbc.asm"
;
CRTACT		.SET	TRUE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
;
VDUENABLE	.SET	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
CVDUENABLE	.SET	TRUE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
VGAENABLE	.SET	TRUE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
;
FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
FDMODE		.SET	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
;
IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
;
PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
;
SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDMODE		.SET	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC]
;
PRPENABLE	.SET	TRUE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
;
;==================================================================================================
;   ENABLE DRIVER DEBUGGING - REMOVE ; TO ENABLE
;==================================================================================================
;
;#DEFINE acia acia	
;#DEFINE asci asci
;#DEFINE ay38910 ay38910
;#DEFINE bqrtc bqrtc
;#DEFINE ctc ctc
;#DEFINE cvdu cvdu
;;#DEFINE dma dma			; Not working
;#DEFINE ds7rtc ds7rtc
;#DEFINE ds1501rt ds1501rtc
;#DEFINE dsky dsky
;#DEFINE dskyng dskyng
;#DEFINE dsrtc dsrtc
;#DEFINE duart duart
;#DEFINE fd fd
;#DEFINE gdc gdc
;#DEFINE hdsk hdsk
;#DEFINE ide ide
;#DEFINE intrtc intrtc
;#DEFINE kbd kbd
;#DEFINE kio kio
;#DEFINE lpt lpt
;#DEFINE md md
;#DEFINE mky mky
;#DEFINE pcf8584 pcf8584
;#DEFINE pio pio
;#DEFINE ppide ppide
;#DEFINE ppk ppk
;#DEFINE ppp ppp
;#DEFINE prp prp
;#DEFINE rf rf
;#DEFINE rp5rtc rp5rtc
;#DEFINE sd sd
;#DEFINE simrtc simrtc
;#DEFINE sio sio
;#DEFINE sn76489 sn76489
;#DEFINE spk spk
;#DEFINE tms tms
;#DEFINE uart uart
;#DEFINE uf uf
;#DEFINE vdu vdu
;#DEFINE vga vga
;#DEFINE ym2612 ym2612
;#DEFINE z2u z2u
;