;
;==================================================================================================
;   RCBUS Z80 COLECOVISION-COMPATIBLE CONFIGURATION FOR J.B. LANGSTON'S GAME BOARDS
;==================================================================================================
;
; THIS CONFIGURATION ENABLES DRIVERS FOR THE TMS9918 AND SN76489 BOARDS BY J.B. LANGSTON
; AND THE YM2149 BOARD BY ED BRINDLEY. THE TMS9918 IS CONFIGURED TO USE THE COLECOVISION
; PORTS AND HAS INTERRUPTS DISABLED BECAUSE COLECOVISION USES NMI, WHICH WOULD BREAK CP/M
; WHEN ENABLED. IT IS CONFIGURED FOR A 3.686MHZ CPU CLOCK IN ORDER TO BE COMPATIBLE WITH
; COLECOVISION GAMES. THE FIRST SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE CPU
; RUNNING AT THIS SPEED. THE SECOND SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE
; SECOND CLOCK SET TO 7.373MHZ. LOWER BAUD RATES CAN BE ACHIEVED ON THE SECOND PORT BY
; MOVING THE SECONDARY CLOCK DIVIDER JUMPER (E.G., 38400 @ 2.458MHZ). THE BAUD RATE DOES
; NOT NEED TO BE CHANGED IN THIS CONFIGURATION FILE IN ORDER TO DO THIS, BUT THE DEVICE
; LIST WILL INCORRECTLY SHOW THE PORT RUNNING AT 115200 REGARDLESS OF THE CLOCK DIVIDER.
; UNCOMMENT THE LINE THAT SETS BOOTCON TO 1 TO BOOT ON THE SECOND SIO PORT BY DEFAULT.
;
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
; YOUR FILE IN THE BUILD PROCESS.
;
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
;
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
; DIRECTORIES ABOVE THIS ONE).
;
#DEFINE	BOOT_DEFAULT	"Z"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
;
#include "cfg_rcz80.asm"
;
CPUOSC		.SET	3686400		; CPU OSC FREQ IN MHZ
CRTACT		.SET	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
;BOOTCON         .SET    1               ; BOOT CONSOLE DEVICE
;
DSRTCENABLE	.SET	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
RP5RTCENABLE	.SET	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
;
UARTENABLE	.SET	FALSE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
DUARTENABLE	.SET	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
;
SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
SIODEBUG	.SET	FALSE		; SIO: ENABLE DEBUG OUTPUT
SIOBOOT		.SET	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
SIOCNT		.SET	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
SIO0MODE	.SET	SIOMODE_RC	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
SIO0BASE	.SET	$80		; SIO 0: REGISTERS BASE ADR
SIO0ACLK	.SET	CPUOSC		; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
SIO0ACFG	.SET	SER_115200_8N1	; SIO 0A: SERIAL LINE CONFIG
SIO0ACTCC	.SET	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
SIO0BCLK	.SET	7372800		; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
SIO0BCFG	.SET	SER_115200_8N1	; SIO 0B: SERIAL LINE CONFIG
SIO0BCTCC	.SET	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
;
TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
TMSMODE		.SET	TMSMODE_COLECO	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
MKYENABLE	.SET	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
VDAEMU_SERKBD	.SET	1		; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
;
AY38910ENABLE	.SET	TRUE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
AYMODE		.SET	AYMODE_RCZ80	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
SN76489ENABLE	.SET	TRUE		; SN: ENABLE SN76489 SOUND DRIVER
;
FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
;
IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
SDENABLE	.SET	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
SDCNT		.SET	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
;
PRPENABLE	.SET	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)