;
;==================================================================================================
;   RC2014 Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRCC)
;==================================================================================================
;
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY.  THIS FILE CONTAINS
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS.  IT IS INTENDED THAT YOU MAKE
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
; YOUR FILE IN THE BUILD PROCESS.
;
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
; ANYTHING AS IS.  THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
; SETTINGS.
;
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
;
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
; DIRECTORIES ABOVE THIS ONE).
;
#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
;
#include "Config/RCZ280_nat.asm"
;
CPUOSC		.SET	14745600	; CPU OSC FREQ IN MHZ
;
RAMSIZE		.SET	256		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
ROMSIZE		.SET	256		; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
ROMSIZE_CHK	.SET	256		; ROMSIZE VALUE VEREIFICATION (0=DISABLED)
;
RAMLOC		.SET	18		; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
RAMBIAS		.SET	(1 << (RAMLOC - 10))	; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
;
MDROM		.SET	TRUE		; MD: ENABLE ROM DISK
MDRAM		.SET	FALSE		; MD: ENABLE RAM DISK
;
;
Z2UOSC		.SET	(CPUOSC / 8)	; Z2U: OSC FREQUENCY IN MHZ
Z2U0HFC		.SET	TRUE		; Z2U0: ENABLE HARDWARE FLOW CONTROL