mirror of https://github.com/wwarthen/RomWBW.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
77 lines
4.0 KiB
77 lines
4.0 KiB
;
|
|
;==================================================================================================
|
|
; RCBUS Z280 ZZRCC CONFIGURATION
|
|
;==================================================================================================
|
|
;
|
|
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
|
|
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS
|
|
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE
|
|
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
|
|
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
|
|
; YOUR FILE IN THE BUILD PROCESS.
|
|
;
|
|
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
|
|
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
|
|
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
|
|
; SETTINGS.
|
|
;
|
|
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
|
|
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
|
|
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
|
|
;
|
|
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
|
|
; DIRECTORIES ABOVE THIS ONE).
|
|
;
|
|
#DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
|
|
;
|
|
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
|
|
;
|
|
#include "cfg_rcz280.asm"
|
|
;
|
|
CPUOSC .SET 14745600 ; CPU OSC FREQ IN MHZ
|
|
INTMODE .SET 3 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
|
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
;
|
|
FPLED_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL LEDS
|
|
FPSW_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL SWITCHES
|
|
;
|
|
MEMMGR .SET MM_Z280 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
|
|
;
|
|
RAMSIZE .SET 256 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
ROMSIZE .SET 256 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
RAMBIAS .SET ROMSIZE ; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
|
|
;
|
|
Z280_MEMLOWAIT .SET 0 ; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
|
|
Z280_MEMHIWAIT .SET 0 ; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
|
|
Z280_IOWAIT .SET 1 ; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
|
|
Z280_INTWAIT .SET 0 ; Z280: INT ACK WAIT STATUS (0-3)
|
|
;
|
|
MDROM .SET TRUE ; MD: ENABLE ROM DISK
|
|
MDRAM .SET TRUE ; MD: ENABLE RAM DISK
|
|
;
|
|
Z2UENABLE .SET TRUE ; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
|
|
Z2UOSC .SET (CPUOSC / 8) ; Z2U: OSC FREQUENCY IN MHZ
|
|
Z2U0HFC .SET TRUE ; Z2U0: ENABLE HARDWARE FLOW CONTROL
|
|
UARTENABLE .SET TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
|
|
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
|
|
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
;
|
|
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
|
|
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
|
|
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
|
|
VRCENABLE .SET TRUE ; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
|
|
VDAEMU_SERKBD .SET $FF ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
|
|
;
|
|
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER
|
|
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
|
|
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER
|
|
;
|
|
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
|
|
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
|
|
;
|
|
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
|
|
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
|
|
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
|
|
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
|
|
;
|
|
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
|
|
|