mirror of
https://github.com/wwarthen/RomWBW.git
synced 2026-02-06 22:43:15 -06:00
186 lines
8.0 KiB
Z80 Assembly
186 lines
8.0 KiB
Z80 Assembly
;::::::::::::::::::::::::::::::::::::::::::********************************
|
||
; I/O Configuration Area ****** Hardware Specific ******
|
||
; - D-X Designs Pty Ltd P112 - ********************************
|
||
;
|
||
; 1.2 - 22 Aug 01 - Cleaned up for GPL release. HFB
|
||
; 1.1 - 18 Apr 97 - Modified to Add GIDE Definitions. HFB
|
||
; 1.0 - 27 Jan 97 - Initial Release for P112. HFB
|
||
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
||
|
||
;*** * * * * * * * * * * W A R N I N G ! ! ! * * * * * * * * * * * * ***
|
||
;*** Do NOT alter any of the ordering or sizing of the following data ***
|
||
;*** locations or utilities will probably NOT function correctly! ***
|
||
;*** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * ***
|
||
|
||
CSEG
|
||
; Form Option Byte 1
|
||
|
||
OPT1 DEFL [BANKED AND 1] ; Bit 0 = unbanked/banked
|
||
OPT1 DEFL OPT1+[INROM AND 2] ; Bit 1 = Bank in RAM/Bank in ROM
|
||
OPT1 DEFL OPT1+[AUTOSL AND 4] ; Bit 2 = DPB Fixed/DPB Assignable
|
||
OPT1 DEFL OPT1+[BANKED AND ZSDOS2 AND 8] ; Bit 3 = ALV/CSV in Banked RAM
|
||
; Bit 7 is "Lock" flag for system loads
|
||
; If set to 1, LDSYS will not load a
|
||
; new system over the running one.
|
||
|
||
DEFB 'B/P-WW' ; Six-char string for Text ID Matching
|
||
|
||
CONFIG:
|
||
IOBYT: DEFB 10010100B ; LST:=PIO, AUX:=COM2, CON:=COM1
|
||
SYSDRV: DEFB 0 ; System drive (a=0, b=1...)
|
||
OPTF1: DEFB OPT1 ; Option flags
|
||
|
||
UABNK: DEFB BNKU ; Beginning of User Bank(s) if Banked System
|
||
; (Ending Bank denoted by SYSBNK-1)
|
||
TPABNK: DEFB BNK0 ; TPA Bank Number if Banked System
|
||
SYSBNK: DEFB BNK2 ; Beginning of System Bank(s) if Banked System
|
||
; (Ending Bank denoted by RAMBNK-1)
|
||
RAMBNK: DEFB BNK3 ; Base Bank Number for Ram Disk
|
||
MAXBNK: DEFB BNKM ; Highest permissible Bank Number
|
||
HICOMM: DEFB 80H ; Page address of start of high Common Memory
|
||
DPBSZ: DEFB DPBSIZ ; Size of DPB
|
||
NUMDPB:
|
||
IF BANKED
|
||
DEFB 0 ; Number of DPBs in Common RAM
|
||
DEFB NRDPB ; Number of Banked DPBs
|
||
ELSE
|
||
DEFB NRDPB ; Number of DPBs in Common RAM
|
||
DEFB 0 ; Number of Banked DPBs
|
||
ENDIF
|
||
DPBADR:
|
||
IF BANKED
|
||
DEFW 0 ; Pointer to dirst Common RAM XDPB
|
||
DEFW DPB ; Pointer to first XDPB in Alternate Bank
|
||
ELSE
|
||
DEFW DPB ; Pointer to first Common RAM XDPB
|
||
DEFW 0 ; Pointer to first XDPB in Alternate Bank
|
||
ENDIF
|
||
|
||
AUTOCMD: AUTOCL ; Startup command for Z3
|
||
|
||
ENVADR: DEFW Z3ENV ; Pointer to the Environment Descriptor
|
||
|
||
;------------ Banked User Area Control Information ---------------
|
||
; An existing User Area cannot exist in Bank 0 by decree. The User Area
|
||
; can therefore be used as a flag to determine whether such an area exists.
|
||
; The Bank Number is set in DEF-xx.LIB. To keep Page 0 equivalent free in
|
||
; the user bank, we offset values to 80H (it's just a good number). The
|
||
; top of each User Bank is 7FFFH as with all of the switched banks in
|
||
; a B/P Bios System. Banked applications should chain themselves together
|
||
; sequentially so that the end can be determined and space managed.
|
||
|
||
UADAT: DEFB BNKU ; Flag for Banked User Area (0 if None)
|
||
DEFW 0080H ; Pointer to Start of User area in Bank
|
||
|
||
;---------------- CPU Configuration Information ------------------
|
||
|
||
SPEED: DEFB MHZ ; Set to processor speed value in Configuration
|
||
WAITS: DEFB 00010010B ; Number of additional Memory & IO Wait states
|
||
; ||||++++--- # of IO Wait States (bits 3-0, only 1 & 0 used)
|
||
; ++++------- # of Memory Wait States (bits 7-4, only 5 & 4 used)
|
||
|
||
RELOD0: DEFW 2560*MHZ ; 16-bit constant for counter/timer refresh
|
||
; based on 50 mS Interrupts to Down Timer.
|
||
; Use 2560 for 12.288/18.432MHz etc. Crystals,
|
||
; 2500 for 16.000MHz Crystals.
|
||
|
||
;-------- Physical Floppy Disk Configuration Information ---------
|
||
; The Physical Drive table consists of 5 bytes for each of 4 Floppy Drives
|
||
; thereby providing all necessary data to all types of controllers.
|
||
;
|
||
; 1 - Drive Characteristics Bits. The Bits have the following meanings:
|
||
; D D D D D D D D
|
||
; 7 6 5 4 3 2 1 0
|
||
; | | | | | +-+-+---- Disk Size 000=Fixed; 001=8"; 010=5.25"; 011=3.5" (*)
|
||
; | | | | +---------- Single-Sided (0); Double-Sided (1)
|
||
; | | | +------------ (Reserved for Double-Step(1) in XDPH)
|
||
; | | +-------------- Drive Motor Control (1); Motor Always On (0)
|
||
; | +---------------- Max Speed is 5.25" (0); 8" & Hard Disk & Hi-Dens (1)
|
||
; +------------------ (Reserved for Single(1)/Double(0) Density in XDPH)
|
||
; (*) - 3.5" and 5.25" drives are treated the same for many formats with
|
||
; the drive bits being reduced to 010B in the BIOS code.
|
||
; 2 - Drive Step Rate (1 to 16 in increments of 1) in milliseconds
|
||
; 3 - Head Load Time (2 to 254 in increments of 2) in milliseconds
|
||
; 4 - Head Unload Time (16 to 240 in increments of 16) in milliseconds
|
||
; 5 - Number of Physical Tracks on Drive
|
||
|
||
FDCSPEC: DEFB 6BH,3, 4,240,80 ; #1 (3"DSHD,3 mS Step,4mS HLT,255 mS HUT,80t)
|
||
DEFB 2AH,6,24,240,40 ; #2 (5"DS,6 mS Step,24mS HLT,255 mS HUT,40t)
|
||
DEFB 2AH,4,24,240,80 ; #3 (5"DS,4 mS Step,24mS HLT,255 mS HUT,80t)
|
||
DEFB 6AH,3, 4,240,80 ; #4 (5"DS,3 mS Step, 4mS HLT,255 mS HUT,80t)
|
||
|
||
MONTIM: DEFB 100 ; Motor On Time (1 to 255) in tenths-of-seconds
|
||
SPINUP: DEFB 8 ; Spinup delay (1 to 255) in tenths-of-seconds
|
||
MXRTRY: DEFB 4 ; Maximum Number of retries on Floppy Opns
|
||
|
||
IVCT: DEFW 0 ; Pointer to interrupt vectors
|
||
|
||
;-------- Physical Hard Drive Configuration Information ----------
|
||
; Hard Disk data begins w/Controller Type, followed by data for 3 drives.
|
||
; The first byte for each drive consists of a byte containing bit codes
|
||
; for SCSI Device, Logical Unit, and a bit indicating whether or not the
|
||
; drive is physically connected to the system. The configuration should
|
||
; match that contained in DPHHD-xx.LIB for Hard Drive partitions.
|
||
; Bit 7 6 5 4 3 2 1 0
|
||
; | | | | | | | |
|
||
; | | | | | +-+-+-- Physical Device Number (0..6, 7 = Host)
|
||
; | | | | +-------- (reserved)
|
||
; | | | +---------- 1 = Drive Active, 0 = No Drive
|
||
; +-+-+------------ Logical Unit Number (usually 0 or 1)
|
||
|
||
;.....
|
||
; The Controller Type Byte contains information needed to dictate the specific
|
||
; bytes to be used to communicate to a SASI/SCSI-connected Hard Drive.
|
||
; Additional bytes will be defined as needed, so please coordinate any
|
||
; extensions with the Authors to insure the generality of tools.
|
||
|
||
CNTRLR: DEFB 80H ; Controller Types recognized are:
|
||
; 0- Owl 5- Conner SCSI
|
||
; 1- Adaptec ACB-4000A 6- Quantum SCSI
|
||
; 2- Xebec 1410A/Shugart 1610-3 7- Maxtor SCSI
|
||
; 3- Seagate SCSI 8- Syquest SCSI
|
||
; 4- Shugart 1610-4 Minimal SCSI 80H- GIDE (IDE/ATA)
|
||
|
||
; First drive (Generic HBIOS drive configuration)
|
||
|
||
BITS DEFL 00000000B ; First HBIOS Hard Disk Drive
|
||
|
||
BITS DEFL BITS+[UNIT_0 AND 10H] ; If active, set Bit 4
|
||
|
||
HDRV0: DEFB BITS ; Set Device, Unit, and Active bits
|
||
DEFW 520 ; Number of Cylinders
|
||
DEFB 16 ; Number of Heads
|
||
DEFW 16 ; IDE - Number of Sectors Per Track
|
||
DEFW 0000 ; Cylinder # to start precompensation
|
||
DEFB 0 ; Step Rate (0=3ms, 1=28us, 2=12us)
|
||
|
||
; Second drive (Generic HBIOS drive configuration)
|
||
|
||
BITS DEFL 00000001B ; Second HBIOS Hard Disk Drive
|
||
|
||
BITS DEFL BITS+[UNIT_1 AND 10H] ; If active, set Bit 4
|
||
|
||
HDRV1: DEFB BITS ; Set Device, Unit, and Active bits
|
||
DEFW 520 ; Number of Cylinders
|
||
DEFB 16 ; Number of Heads
|
||
DEFW 16 ; IDE - Number of Sectors Per Track
|
||
DEFW 0000 ; Cylinder # to start precompensation
|
||
DEFB 0 ; Step Rate (0=3ms, 1=28us, 2=12us)
|
||
|
||
; Third drive (Generic HBIOS drive configuration)
|
||
|
||
BITS DEFL 00000010B ; Third HBIOS Hard Disk Drive
|
||
|
||
BITS DEFL BITS+[UNIT_2 AND 10H] ; If active, set Bit 4
|
||
|
||
HDRV2: DEFB BITS ; Set Device, Unit, and Active bits
|
||
DEFW 520 ; Number of Cylinders
|
||
DEFB 16 ; Number of Heads
|
||
DEFW 16 ; IDE - Number of Sectors Per Track
|
||
DEFW 0000 ; Cylinder # to start precompensation
|
||
DEFB 0 ; Step Rate (0=3ms, 1=28us, 2=12us)
|
||
|
||
DEFB 0,0,0,0,0 ; (Reserved)
|
||
|
||
;======= End of Fixed Config ======== Device Config follows ========
|
||
|