mirror of
https://github.com/wwarthen/RomWBW.git
synced 2026-02-06 14:11:48 -06:00
39f796ce22
The EtchedPixels floppy disk controller is known by the identifier 'FDMODE_EPFDC', but the comments in the Config subdirectory have an incorrect reference to 'EPWDC'. This fix updates the comments to use the correct name.
80 lines
4.7 KiB
NASM
80 lines
4.7 KiB
NASM
;
|
|
;==================================================================================================
|
|
; RCBUS Z80 COLECOVISION-COMPATIBLE CONFIGURATION FOR J.B. LANGSTON'S GAME BOARDS
|
|
;==================================================================================================
|
|
;
|
|
; THIS CONFIGURATION ENABLES DRIVERS FOR THE TMS9918 AND SN76489 BOARDS BY J.B. LANGSTON
|
|
; AND THE YM2149 BOARD BY ED BRINDLEY. THE TMS9918 IS CONFIGURED TO USE THE COLECOVISION
|
|
; PORTS AND HAS INTERRUPTS DISABLED BECAUSE COLECOVISION USES NMI, WHICH WOULD BREAK CP/M
|
|
; WHEN ENABLED. IT IS CONFIGURED FOR A 3.686MHZ CPU CLOCK IN ORDER TO BE COMPATIBLE WITH
|
|
; COLECOVISION GAMES. THE FIRST SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE CPU
|
|
; RUNNING AT THIS SPEED. THE SECOND SIO PORT IS CONFIGURED TO RUN AT 115200 BPS WITH THE
|
|
; SECOND CLOCK SET TO 7.373MHZ. LOWER BAUD RATES CAN BE ACHIEVED ON THE SECOND PORT BY
|
|
; MOVING THE SECONDARY CLOCK DIVIDER JUMPER (E.G., 38400 @ 2.458MHZ). THE BAUD RATE DOES
|
|
; NOT NEED TO BE CHANGED IN THIS CONFIGURATION FILE IN ORDER TO DO THIS, BUT THE DEVICE
|
|
; LIST WILL INCORRECTLY SHOW THE PORT RUNNING AT 115200 REGARDLESS OF THE CLOCK DIVIDER.
|
|
; UNCOMMENT THE LINE THAT SETS BOOTCON TO 1 TO BOOT ON THE SECOND SIO PORT BY DEFAULT.
|
|
;
|
|
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
|
|
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS
|
|
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE
|
|
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
|
|
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
|
|
; YOUR FILE IN THE BUILD PROCESS.
|
|
;
|
|
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
|
|
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
|
|
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
|
|
;
|
|
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
|
|
; DIRECTORIES ABOVE THIS ONE).
|
|
;
|
|
#DEFINE BOOT_DEFAULT "Z" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
|
|
;
|
|
#include "cfg_rcz80.asm"
|
|
;
|
|
CPUOSC .SET 3686400 ; CPU OSC FREQ IN MHZ
|
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
;BOOTCON .SET 1 ; BOOT CONSOLE DEVICE
|
|
;
|
|
DSRTCENABLE .SET TRUE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
|
|
RP5RTCENABLE .SET FALSE ; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
|
|
;
|
|
UARTENABLE .SET FALSE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
|
|
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
|
|
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
DUARTENABLE .SET FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
|
|
;
|
|
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
SIODEBUG .SET FALSE ; SIO: ENABLE DEBUG OUTPUT
|
|
SIOBOOT .SET 0 ; SIO: REBOOT ON RCV CHAR (0=DISABLED)
|
|
SIOCNT .SET 1 ; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
|
|
SIO0MODE .SET SIOMODE_RC ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
|
|
SIO0BASE .SET $80 ; SIO 0: REGISTERS BASE ADR
|
|
SIO0ACLK .SET CPUOSC ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO0ACFG .SET SER_115200_8N1 ; SIO 0A: SERIAL LINE CONFIG
|
|
SIO0ACTCC .SET -1 ; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
SIO0BCLK .SET 7372800 ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO0BCFG .SET SER_115200_8N1 ; SIO 0B: SERIAL LINE CONFIG
|
|
SIO0BCTCC .SET -1 ; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
;
|
|
TMSENABLE .SET TRUE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
|
|
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
|
|
TMSMODE .SET TMSMODE_COLECO ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
|
|
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
|
|
VDAEMU_SERKBD .SET 1 ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
|
|
;
|
|
AY38910ENABLE .SET TRUE ; AY: AY-3-8910 / YM2149 SOUND DRIVER
|
|
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
|
|
SN76489ENABLE .SET TRUE ; SN: ENABLE SN76489 SOUND DRIVER
|
|
;
|
|
FDENABLE .SET FALSE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
|
|
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
|
|
;
|
|
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
|
|
PPIDEENABLE .SET FALSE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
|
|
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
|
|
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
|
|
;
|
|
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
|