mirror of https://github.com/wwarthen/RomWBW.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
204 lines
10 KiB
204 lines
10 KiB
;
|
|
;==================================================================================================
|
|
; ROMWBW 2.X CONFIGURATION DEFAULTS FOR EASY Z80
|
|
;==================================================================================================
|
|
;
|
|
; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
|
|
; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED. INSTEAD, YOU SHOULD
|
|
; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
|
|
; UNDER THIS DIRECTORY.
|
|
;
|
|
; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
|
|
; FOR THE PLATFORM.
|
|
;
|
|
#DEFINE PLATFORM_NAME "EASYZ80"
|
|
;
|
|
PLATFORM .EQU PLT_EZZ80 ; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
|
|
CPUFAM .EQU CPU_Z80 ; CPU FAMILY: CPU_[Z80|Z180|Z280]
|
|
BIOS .EQU BIOS_WBW ; HARDWARE BIOS: BIOS_[WBW|UNA]
|
|
BATCOND .EQU FALSE ; ENABLE LOW BATTERY WARNING MESSAGE
|
|
HBIOS_MUTEX .EQU FALSE ; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
|
|
USELZSA2 .EQU TRUE ; ENABLE FONT COMPRESSION
|
|
TICKFREQ .EQU 50 ; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
|
|
;
|
|
BOOT_TIMEOUT .EQU -1 ; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
|
|
;
|
|
CPUOSC .EQU 10000000 ; CPU OSC FREQ IN MHZ
|
|
INTMODE .EQU 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
|
|
DEFSERCFG .EQU SER_115200_8N1 ; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
|
|
;
|
|
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
MEMMGR .EQU MM_Z2 ; MM_[SBC|Z2|N8|Z180|Z280|ZRC]: MEMORY MANAGER
|
|
MPGSEL_0 .EQU $78 ; Z2 MEM MGR BANK 0 PAGE SELECT REG (WRITE ONLY)
|
|
MPGSEL_1 .EQU $79 ; Z2 MEM MGR BANK 1 PAGE SELECT REG (WRITE ONLY)
|
|
MPGSEL_2 .EQU $7A ; Z2 MEM MGR BANK 2 PAGE SELECT REG (WRITE ONLY)
|
|
MPGSEL_3 .EQU $7B ; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
|
|
MPGENA .EQU $7C ; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
|
|
;
|
|
RTCIO .EQU $C0 ; RTC LATCH REGISTER ADR
|
|
WDOGIO .EQU $6F ; WATCHDOG REGISTER ADR
|
|
;
|
|
KIOENABLE .EQU FALSE ; ENABLE ZILOG KIO SUPPORT
|
|
KIOBASE .EQU $80 ; KIO BASE I/O ADDRESS
|
|
;
|
|
CTCENABLE .EQU TRUE ; ENABLE ZILOG CTC SUPPORT
|
|
CTCDEBUG .EQU FALSE ; ENABLE CTC DRIVER DEBUG OUTPUT
|
|
CTCBASE .EQU $88 ; CTC BASE I/O ADDRESS
|
|
CTCTIMER .EQU TRUE ; ENABLE CTC PERIODIC TIMER
|
|
CTCMODE .EQU CTCMODE_CTR ; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
|
|
CTCPRE .EQU 256 ; PRESCALE CONSTANT (1-256)
|
|
CTCPRECH .EQU 2 ; PRESCALE CHANNEL (0-3)
|
|
CTCTIMCH .EQU 3 ; TIMER CHANNEL (0-3)
|
|
CTCOSC .EQU 921600 ; CTC CLOCK FREQUENCY
|
|
;
|
|
EIPCENABLE .EQU FALSE ; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
|
|
;
|
|
DIAGENABLE .EQU FALSE ; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
|
|
DIAGPORT .EQU $00 ; DIAGNOSTIC PORT ADDRESS
|
|
DIAGDISKIO .EQU TRUE ; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
|
|
;
|
|
LEDENABLE .EQU FALSE ; ENABLES STATUS LED (SINGLE LED)
|
|
LEDPORT .EQU $0E ; STATUS LED PORT ADDRESS
|
|
LEDDISKIO .EQU TRUE ; ENABLES DISK I/O ACTIVITY ON STATUS LED
|
|
;
|
|
DSKYENABLE .EQU FALSE ; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
|
|
;
|
|
CRTACT .EQU FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
VDAEMU .EQU EMUTYP_ANSI ; VDA EMULATION: EMUTYP_[TTY|ANSI]
|
|
ANSITRACE .EQU 1 ; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
;
|
|
DSRTCENABLE .EQU TRUE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
|
|
DSRTCMODE .EQU DSRTCMODE_STD ; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
|
|
DSRTCCHG .EQU FALSE ; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
|
|
;
|
|
BQRTCENABLE .EQU FALSE ; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
|
|
BQRTC_BASE .EQU $50 ; BQRTC: I/O BASE ADDRESS
|
|
;
|
|
INTRTCENABLE .EQU FALSE ; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
|
|
;
|
|
HTIMENABLE .EQU FALSE ; ENABLE SIMH TIMER SUPPORT
|
|
SIMRTCENABLE .EQU FALSE ; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
|
|
;
|
|
DUARTENABLE .EQU FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
|
|
DUARTCNT .EQU 2 ; DUART: NUMBER OF CHIPS TO DETECT (1-2)
|
|
DUART0BASE .EQU $A0 ; DUART 0: BASE ADDRESS OF CHIP
|
|
DUART0ACFG .EQU DEFSERCFG ; DUART 0A: SERIAL LINE CONFIG
|
|
DUART0BCFG .EQU DEFSERCFG ; DUART 0B: SERIAL LINE CONFIG
|
|
DUART1BASE .EQU $40 ; DUART 1: BASE ADDRESS OF CHIP
|
|
DUART1ACFG .EQU DEFSERCFG ; DUART 1A: SERIAL LINE CONFIG
|
|
DUART1BCFG .EQU DEFSERCFG ; DUART 1B: SERIAL LINE CONFIG
|
|
;
|
|
UARTENABLE .EQU TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
|
|
UARTOSC .EQU 1843200 ; UART: OSC FREQUENCY IN MHZ
|
|
UARTCFG .EQU DEFSERCFG | SER_RTS ; UART: LINE CONFIG FOR UART PORTS
|
|
UARTSBC .EQU FALSE ; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
|
|
UARTCAS .EQU FALSE ; UART: AUTO-DETECT ECB CASSETTE UART
|
|
UARTMFP .EQU FALSE ; UART: AUTO-DETECT MF/PIC UART
|
|
UART4 .EQU FALSE ; UART: AUTO-DETECT 4UART UART
|
|
UARTRC .EQU TRUE ; UART: AUTO-DETECT RC UART
|
|
;
|
|
ASCIENABLE .EQU FALSE ; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
|
|
;
|
|
ACIAENABLE .EQU FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
|
|
;
|
|
SIOENABLE .EQU TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
SIODEBUG .EQU FALSE ; SIO: ENABLE DEBUG OUTPUT
|
|
SIOCNT .EQU 2 ; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
|
|
SIO0MODE .EQU SIOMODE_STD ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
|
|
SIO0BASE .EQU $80 ; SIO 0: REGISTERS BASE ADR
|
|
SIO0ACLK .EQU 1843200 ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO0ACFG .EQU DEFSERCFG ; SIO 0A: SERIAL LINE CONFIG
|
|
SIO0ACTCC .EQU -1 ; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
SIO0BCLK .EQU 1843200 ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO0BCFG .EQU DEFSERCFG ; SIO 0B: SERIAL LINE CONFIG
|
|
SIO0BCTCC .EQU -1 ; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
SIO1MODE .EQU SIOMODE_RC ; SIO 1: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
|
|
SIO1BASE .EQU $84 ; SIO 1: REGISTERS BASE ADR
|
|
SIO1ACLK .EQU 7372800 ; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO1ACFG .EQU DEFSERCFG ; SIO 1A: SERIAL LINE CONFIG
|
|
SIO1ACTCC .EQU -1 ; SIO 1A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
SIO1BCLK .EQU 7372800 ; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO1BCFG .EQU DEFSERCFG ; SIO 1B: SERIAL LINE CONFIG
|
|
SIO1BCTCC .EQU -1 ; SIO 1B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
;
|
|
XIOCFG .EQU DEFSERCFG ; XIO: SERIAL LINE CONFIG
|
|
;
|
|
VDUENABLE .EQU FALSE ; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
|
|
CVDUENABLE .EQU FALSE ; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
|
|
NECENABLE .EQU FALSE ; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
|
|
TMSENABLE .EQU FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
|
|
TMSTIMENABLE .EQU FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
|
|
VGAENABLE .EQU FALSE ; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
|
|
;
|
|
MDENABLE .EQU TRUE ; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
|
|
MDTRACE .EQU 1 ; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
MDFFENABLE .EQU FALSE ; MD: ENABLE FLASH FILE SYSTEM
|
|
;
|
|
FDENABLE .EQU FALSE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
|
|
FDMODE .EQU FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
|
|
FDCNT .EQU 2 ; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
|
|
FDTRACE .EQU 1 ; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
|
|
FDMEDIA .EQU FDM144 ; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
|
|
FDMEDIAALT .EQU FDM720 ; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
|
|
FDMAUTO .EQU TRUE ; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
|
|
;
|
|
RFENABLE .EQU FALSE ; RF: ENABLE RAM FLOPPY DRIVER
|
|
;
|
|
IDEENABLE .EQU FALSE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
|
|
IDETRACE .EQU 1 ; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
IDECNT .EQU 1 ; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
|
|
IDE0MODE .EQU IDEMODE_RC ; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
|
|
IDE0BASE .EQU $10 ; IDE 0: IO BASE ADDRESS
|
|
IDE0DATLO .EQU $00 ; IDE 0: DATA LO PORT FOR 16-BIT I/O
|
|
IDE0DATHI .EQU $00 ; IDE 0: DATA HI PORT FOR 16-BIT I/O
|
|
IDE0A8BIT .EQU TRUE ; IDE 0A (MASTER): 8 BIT XFER
|
|
IDE0B8BIT .EQU TRUE ; IDE 0B (MASTER): 8 BIT XFER
|
|
IDE1MODE .EQU IDEMODE_NONE ; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
|
|
IDE1BASE .EQU $00 ; IDE 1: IO BASE ADDRESS
|
|
IDE1DATLO .EQU $00 ; IDE 1: DATA LO PORT FOR 16-BIT I/O
|
|
IDE1DATHI .EQU $00 ; IDE 1: DATA HI PORT FOR 16-BIT I/O
|
|
IDE1A8BIT .EQU TRUE ; IDE 1A (MASTER): 8 BIT XFER
|
|
IDE1B8BIT .EQU TRUE ; IDE 1B (MASTER): 8 BIT XFER
|
|
IDE2MODE .EQU IDEMODE_NONE ; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
|
|
IDE2BASE .EQU $00 ; IDE 2: IO BASE ADDRESS
|
|
IDE2DATLO .EQU $00 ; IDE 2: DATA LO PORT FOR 16-BIT I/O
|
|
IDE2DATHI .EQU $00 ; IDE 2: DATA HI PORT FOR 16-BIT I/O
|
|
IDE2A8BIT .EQU TRUE ; IDE 2A (MASTER): 8 BIT XFER
|
|
IDE2B8BIT .EQU TRUE ; IDE 2B (MASTER): 8 BIT XFER
|
|
;
|
|
PPIDEENABLE .EQU FALSE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
|
|
PPIDETRACE .EQU 1 ; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
PPIDECNT .EQU 1 ; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
|
|
PPIDE0BASE .EQU $20 ; PPIDE 0: PPI REGISTERS BASE ADR
|
|
PPIDE0A8BIT .EQU FALSE ; PPIDE 0A (MASTER): 8 BIT XFER
|
|
PPIDE0B8BIT .EQU FALSE ; PPIDE 0B (SLAVE): 8 BIT XFER
|
|
;
|
|
SDENABLE .EQU FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
|
|
SDMODE .EQU SDMODE_PPI ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
|
|
SDCNT .EQU 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
|
|
SDTRACE .EQU 1 ; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
SDCSIOFAST .EQU FALSE ; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
|
|
;
|
|
PRPENABLE .EQU FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
|
|
PRPSDENABLE .EQU TRUE ; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
|
|
PRPSDTRACE .EQU 1 ; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
PRPCONENABLE .EQU TRUE ; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
|
|
;
|
|
PPPENABLE .EQU FALSE ; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
|
|
;
|
|
HDSKENABLE .EQU FALSE ; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
|
|
;
|
|
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
|
|
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
|
|
PPI_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
|
|
;
|
|
UFENABLE .EQU FALSE ; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
|
|
;
|
|
AUDIOTRACE .EQU FALSE ; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
|
|
SN76489ENABLE .EQU FALSE ; SN76489 SOUND DRIVER
|
|
SN7CLK .EQU CPUOSC / 4 ; DEFAULT TO CPUOSC / 4
|
|
|
|
AY38910ENABLE .EQU FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER
|
|
AY_CLK .EQU CPUOSC / 4 ; DEFAULT TO CPUOSC / 4
|
|
AYMODE .EQU AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG/N8/RCZ80/RCZ180]
|
|
SPKENABLE .EQU FALSE ; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
|
|
|