mirror of
https://github.com/wwarthen/RomWBW.git
synced 2026-02-06 14:11:48 -06:00
86 lines
3.9 KiB
INI
86 lines
3.9 KiB
INI
; BPCNFG Configuration script for D-X Designs' P112
|
||
; <--BOOT TRACK Version-->
|
||
;-- Submenu 1 allows changes to be made in miscellaneous system parameters
|
||
|
||
1[ ; Start w/Base Menu, go to Submenu 1
|
||
; 2 STARTUP, ; Uncomment and change name for custom startup script.
|
||
; Comma ends string.
|
||
;; NOTE: While the original P112 plans call for a 16.000 MHz Crystal,
|
||
;; more precise baud rate generation, plus a little extra speed
|
||
;; is obtained by using a 18.432 MHz Crystal.
|
||
;; Select one of the two following pairs, comment out the other
|
||
;; 4 18,, ; Set 18 MHz, Scale divisor (18.432 MHz recommended)
|
||
;; 3 46080, ; Explicitly set for 18*2560
|
||
4 16,, ; Set 16 MHz, Scale divisor (Crystal per Dave's plan)
|
||
3 40000, ; Explicitly set for 16*2500
|
||
5 1, 2, ; Set Wait States: 9 MHz --> Memory = 0, IO = 1
|
||
; 18 MHz --> Memory = 1, IO = 2
|
||
;; The following configures the contiguous system RAM size and allocation.
|
||
;; NOTE: Memory configuration not needed in Boot version, commented out
|
||
;; This layout assumes 'Bank' 0 occupied by image of Flash Boot ROM.
|
||
; 6 Y ; "Hidden" Menu, "Y" acknowledging danger
|
||
; 1 1, ; Base Bank of TPA
|
||
; 2 3, ; First System Bank
|
||
; 3 4, ; First User Bank
|
||
; 4 5, ; First Bank of RAM Disk (Extends to Last)
|
||
; 5 15,, ; Last RAM Bank (7=256k,15=512k, 31=1MB)
|
||
] ; and back to main menu
|
||
|
||
;-- Submenu 2 allows changes to be made to Character IO and IOByte Devices
|
||
; Insure that the Console (COM1) Baud rate is set to that of your terminal
|
||
|
||
2[ ; Start w/Base Menu, go to Submenu 2
|
||
2 10,,,,,,,, ; Set COM1 (Console) to 9600 bps, default settings
|
||
3 10,,,,,,,, ; Set COM2 to 9600 bps, default settings
|
||
] ; and back to main menu
|
||
|
||
;-- Submenu 3 allows changes to be made in the Floppy Drive physical parameters
|
||
|
||
3[ ; Start w/Base Menu, go to Submenu 3
|
||
1 0 3, ; Set Drive, Unit 0 (3.5" Teac FDD 235-4xxx)
|
||
D Y H ; Double-Sided, Motor Needed, "High-Density"
|
||
80, 4, 4, 240, ; 80 Trks, 4 mS Step, 4 mS Head Load, 240 mS Unload
|
||
1 1 2, ; Set Drive, Unit 1 (5.25" Teac FDD 55FGV)
|
||
D Y H ; Double-Sided, Motor Needed, "High-Density"
|
||
80, 4, 4, 240, ; 80 Trks, 4 mS Step, 4 mS Head Load, 240 mS Unload
|
||
]
|
||
|
||
;-- Submenu 4 allows changes to be made in Physical Hard Drive parameters
|
||
|
||
4[ ; Start w/Base Menu, go to Submenu 4
|
||
; Set SCSI Controller Type for this configuration as:
|
||
; 0 = Owl
|
||
; 1 = Adaptec ACB-4000A
|
||
; 2 = Xebec 1410a/Shugart 1610-3
|
||
; 3 = Seagate SCSI
|
||
; 4 = Shugart 1610-4 (Minimal SCSI)
|
||
; 5 - Conner SCSI
|
||
; 6 - Quantum SCSI
|
||
; 7 - Maxtor SCSI
|
||
; 8 - Syquest SCSI
|
||
; 9 - GIDE (Generic IDE/ATA)
|
||
; Sample SCSI config. (Values of Trk/Hd/etc irrelevant)
|
||
1 5 ; Configure Controller to Type #5 (Conner SCSI)
|
||
2 Y 0, 0, ; Set Unit 0 Params, Activate, Unit 0, LUN 0
|
||
615, 4, 615, 615, ; Generic SCSI, 615 Trks, 4 Hds, RedWrt & Precomp @615
|
||
; Sample IDE config. (All values NECESSARY if using GIDE).
|
||
; 1 9 ; Configure Controller to Type (9 = GIDE)
|
||
; 2 Y 0, ; Set Unit 0 Params, Activate, Device 0 (IDE Master)
|
||
; 988, 10, 17, ; Toshiba 2.5" MK1422 Emulates 988 Trks,10 Hds,17 SPT
|
||
]
|
||
|
||
;-- Submenu 5 allows changes to be made to Hard and RAM Disk Logical
|
||
;-- parameters, and exchanging of logical drives.
|
||
|
||
5[ ; Starting w/Base menu, go to Submenu 5
|
||
; Configure the Hard Drive partitions. (Generally, Only two on Boot Disks)
|
||
2 E ; Configure Partition E:
|
||
4,1024, 2, 498,0, ; 4k Allocs, 1024 Dirs, Start @ 2, 498 Trks, Unit 0
|
||
2 F ; Partition F:
|
||
4,1024, 500, 750,0, ; 4k Allocs, 1024 Dirs, Start @ 500, 750 Trks, U 0
|
||
; Swap first HD partitions with Floppies only if going to Hard on boot
|
||
; (Comment out swaps for Floppy-only operation)
|
||
; 1 A E
|
||
; 1 B F
|
||
]
|
||
|