mirror of https://github.com/wwarthen/RomWBW.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52 lines
2.6 KiB
52 lines
2.6 KiB
;
|
|
;==================================================================================================
|
|
; RC2014 Z80 STANDARD CONFIGURATION W/ KIO
|
|
;==================================================================================================
|
|
;
|
|
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
|
|
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS
|
|
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE
|
|
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
|
|
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
|
|
; YOUR FILE IN THE BUILD PROCESS.
|
|
;
|
|
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
|
|
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
|
|
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
|
|
; SETTINGS.
|
|
;
|
|
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
|
|
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
|
|
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
|
|
;
|
|
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
|
|
; DIRECTORIES ABOVE THIS ONE).
|
|
;
|
|
#DEFINE PLATFORM_NAME "RC2014 (KIO)"
|
|
;
|
|
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
|
|
;
|
|
#include "Config/RCZ80_std.asm"
|
|
;
|
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
;
|
|
INTMODE .SET 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
|
|
;
|
|
KIOENABLE .SET TRUE ; ENABLE ZILOG KIO SUPPORT
|
|
;
|
|
CTCENABLE .SET TRUE ; ENABLE ZILOG CTC SUPPORT
|
|
CTCTIMER .SET TRUE ; ENABLE CTC PERIODIC TIMER
|
|
CTCBASE .SET KIOBASE+$04 ; CTC BASE I/O ADDRESS
|
|
;
|
|
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
|
|
;
|
|
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
SIOCNT .SET 1 ; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
|
|
SIO0MODE .SET SIOMODE_STD ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
|
|
SIO0BASE .SET KIOBASE+$08 ; SIO 0: REGISTERS BASE ADR
|
|
SIO0ACLK .SET 1843200 ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO0ACTCC .SET 0 ; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
SIO0BCLK .SET 1843200 ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO0BCTCC .SET 1 ; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
|
|
;
|
|
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
|
|
|