mirror of https://github.com/wwarthen/RomWBW.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
214 lines
7.1 KiB
214 lines
7.1 KiB
;::::::::::::::::::::::::::::::::::::::::::::::::**************************
|
|
; Hard disk routines as implemented for ** Hardware Dependent **
|
|
; SIMH Altair80 ** for exact interface **
|
|
; D-X Designs Pty Ltd P112. **************************
|
|
;--------------------------------------------------------------------------
|
|
; This file uses modifications of the definitions in ICFG-xx to reflect
|
|
; Physical and/or logical definitions for HBIOS drives. A controller type of
|
|
; 8xH signifies IDE/ATA drives, in which case the Drive byte at HDRVx is:
|
|
; 7 6 5 4 3 2 1 0
|
|
; | | | | | | | +- Unit Number (0 = Master, 1 = Slave)
|
|
; | | | | +-+-+--- (reserved)
|
|
; | | | +--------- 1 = Active, 0 = Inactive
|
|
; +-+-+----------- (reserved)
|
|
; Additionally, the first byte of the Reduced Write Cylinder word is re-
|
|
; defined to be the number of physical/logical Sectors-Per-Track.
|
|
; These parameters are used to convert the Track & 16 Sector/Track format
|
|
; assumed in the B/P Bios definitions for Hard Drives into Track/Sector/Head
|
|
; Sector Number needed for IDE/ATA Data accesses. Direct driver IO routines
|
|
; to Select (SELHD), Read (HDREAD) and Write (HDWRIT) are all included here.
|
|
;--------------------------------------------------------------------------
|
|
; 1.0 - 26 Aug 01 - Cleaned up source and included fixes from SCSI. HFB
|
|
; 0.2 - 28 Jun 97 - Added Home Drive, Retry Disable bit handling. HFB
|
|
; 0.1 - 25 Apr 97 - Initial Test Release HFB
|
|
;***************************************************************************
|
|
|
|
IF BANKED
|
|
COMMON /BANK2/
|
|
ELSE
|
|
CSEG
|
|
ENDIF
|
|
|
|
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
; Function 0 - Set User Data Area Adress for Direct Disk IO, Return
|
|
; Number of Bytes in the driver Command Block (SCSI-"like")
|
|
; For IDE, a minimum of 6 Bytes is needed (Comnd,Trk(2),Sctr,Head,Drive)
|
|
; Enter: DE = Address of User Data Area
|
|
; Exit : A = Number of bytes available in the Command Block
|
|
; Uses : A,HL
|
|
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
|
|
HDVALS: CALL PANIC ; NOT IMPLEMENTED!!!!
|
|
RET
|
|
|
|
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
; Function 1 - Set Drive bit Command Block from A
|
|
; Enter: A = Drive Byte
|
|
; Exit : A = Drive Bit in LSB (00/01H, for Master/Slave)
|
|
; Uses : AF
|
|
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
|
|
HDSLCT: CALL PANIC ; NOT IMPLEMENTED!!!!
|
|
RET
|
|
|
|
;:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
; Function 2 - Direct SCSI driver. This routine performs the function
|
|
; described by the command in the HD Command Block with Data area
|
|
; addressed by DE. At the end of the function, 512 bytes of data are
|
|
; transferred from the Bios IO Buffer to the Users Space set by Fcn 0.
|
|
;
|
|
; Enter: DE = Pointer to User Command Descriptor Block
|
|
; HDCOMD contains pre-filled SCSI Command Block
|
|
; A = 0 if No Data to be Written, FF if User-supplied data to write
|
|
; Exit : H = Message Byte value
|
|
; L = Status Byte value
|
|
; A = Status byte, Flags set accordingly.
|
|
; Uses : AF,BC,DE,HL
|
|
; NOTE : Routine assumes the Command Block is properly configured for the
|
|
; desired function and device. Errors in phasing result in program
|
|
; exit and Warm Boot function, while Timeout returns 0FFH.
|
|
; For external access, It assumes the user has used Functions 0 and 1 to
|
|
; set the data transfer source/dest address and logical & physical drive.
|
|
;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
|
|
HD_RW: CALL PANIC ; NOT IMPLEMENTED!!!!
|
|
RET
|
|
|
|
;========================================================================
|
|
; Select Hard Disk (Unit 0/1, Master/Slave) < Internal Bios routine >
|
|
|
|
SELHD: ; SET DEVICE
|
|
|
|
; CALL PRTSTRD
|
|
; DEFB '[SELHD]$'
|
|
|
|
JP SETPARMS ; then set parameters for DPH/DPB
|
|
|
|
;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
; Write to Hard Disk Drive < Internal BIOS Routine >
|
|
; Writes from HSTBUF using HSTTRK and HSTSEC to build Block Number.
|
|
; NOTE: This routine uses physical drive characteristics from ICFG-xx.
|
|
|
|
HDWRIT:
|
|
|
|
XOR A
|
|
LD (HSTWRT),A ; Show no active writes pending
|
|
|
|
JP HDSK_WRITE ; ..continue
|
|
|
|
;::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
|
|
; Read from Hard Disk Drive < Internal BIOS Routine >
|
|
; Reads to HSTBUF using HSTTRK and HSTSEC to build Block Number.
|
|
; NOTE: This routine uses physical drive characteristics from ICFG-xx.
|
|
; The routine computes a sequential block number (as with SCSI) with
|
|
; the algorithm; Trk * 16 + Sector, then computes Head, Sector and Track
|
|
; using Physical characteristics (hdHds = Number_of_Heads,
|
|
; hdSPT = Sectors_per_Track) according to the algorithm:
|
|
;
|
|
; Sector := (Block# MOD hdSPT)+1 (* Quotient1 := Block# DIV hdSPT *)
|
|
; Head := Quotient1 MOD hdHds (* Quotient2 := Quotient1 DIV hdHds *)
|
|
; Track := Quotient2
|
|
|
|
HDREAD:
|
|
JP HDSK_READ
|
|
|
|
IF BANKED
|
|
COMMON /B2RAM/
|
|
ELSE
|
|
DSEG
|
|
ENDIF
|
|
|
|
;======================= End of HARDIDE ===========================
|
|
|
|
|
|
IF BANKED
|
|
COMMON /BANK2/
|
|
ELSE
|
|
CSEG
|
|
ENDIF
|
|
|
|
;
|
|
;==================================================================================================
|
|
; HDSK DISK DRIVER
|
|
;==================================================================================================
|
|
;
|
|
; IO PORT ADDRESSES
|
|
;
|
|
HDSK_IO EQU 0FDH
|
|
;
|
|
HDSK_CMDNONE EQU 0
|
|
HDSK_CMDRESET EQU 1
|
|
HDSK_CMDREAD EQU 2
|
|
HDSK_CMDWRITE EQU 3
|
|
HDSK_CMDPARAM EQU 4
|
|
;
|
|
; STATUS
|
|
;
|
|
HDSKRC_OK EQU 0
|
|
;
|
|
;
|
|
;
|
|
HDSK_READ:
|
|
; CALL PRTSTRD
|
|
; DEFB '[HDSK READ]$'
|
|
|
|
LD B,13H ; $13 IS HBIOS DISK READ
|
|
JR HDSK_RW
|
|
;
|
|
;
|
|
;
|
|
HDSK_WRITE:
|
|
; CALL PRTSTRD
|
|
; DEFB '[HDSK WRITE]$'
|
|
|
|
LD B,14H ; $14 IS HBIOS DISK WRITE
|
|
JR HDSK_RW
|
|
;
|
|
;
|
|
;
|
|
HDSK_RW:
|
|
LD HL,(HSTDPH) ; GET ACTIVE DPH POINTER
|
|
DEC HL ; ADJUST TO POINT TO UNIT NUMBER
|
|
LD C,(HL) ; LOAD IT IN C FOR HBIOS CALL LATER
|
|
PUSH BC ; SAVE FUNCTION AND DEVICE FOR LATER
|
|
LD HL,(HSTTRK) ; GET TRACK VALUE
|
|
LD A,L ; LSB OF TRACK TO A
|
|
AND 0FH ; ISOLATE HEAD IN LOW 4 BITS
|
|
LD D,A ; STUFF IT IN D
|
|
LD A,(HSTSEC) ; GET SECTOR
|
|
LD E,A ; STUFF IT IN E
|
|
LD B,4 ; PREPARE TO SHIFT OUT 4 BIT HEAD VALUE
|
|
HDSK_RW1:
|
|
SRL H ; SHIFT ONE BIT OUT
|
|
RR L ; ... OF HL
|
|
DJNZ HDSK_RW1 ; DO ALL 4 BITS
|
|
POP BC ; RECOVER FUNCTION AND DEVICE
|
|
PUSH BC ; SAVE INCOMING FUNCTION, DEVICE/UNIT
|
|
LD B,12H ; SETUP FOR NEW SEEK CALL
|
|
CALL HBX_INVOKE ; DO IT
|
|
POP BC ; RESTORE INCOMING FUNCTION, DEVICE/UNIT
|
|
RET NZ ; ABORT IF SEEK RETURNED AN ERROR W/ ERROR IN A
|
|
LD HL,(HB_DSKBUF) ; GET BUFFER ADDRESS
|
|
LD DE,1 ; TRANSFER ONE SECTOR
|
|
CALL HBX_INVOKE ; DO IT
|
|
OR A ; SET FLAGS
|
|
RET Z ; DONE IF NO ERROR
|
|
|
|
OR 0FFH ; A=$FF TO SIGNAL ERROR
|
|
RET ; AND DONE W/ ERROR
|
|
;
|
|
;==================================================================================================
|
|
; HDSK DISK DRIVER - DATA
|
|
;==================================================================================================
|
|
;
|
|
IF BANKED
|
|
COMMON /B2RAM/
|
|
ELSE
|
|
DSEG
|
|
ENDIF
|
|
|
|
|
|
HDSK_PDN DEFS 1 ; PHYSICAL DEVICE
|
|
|
|
|
|
|