mirror of https://github.com/wwarthen/RomWBW.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
115 lines
5.7 KiB
115 lines
5.7 KiB
;
|
|
;==================================================================================================
|
|
; ROMWBW 2.X CONFIGURATION FOR MARK IV
|
|
;==================================================================================================
|
|
;
|
|
; BUILD CONFIGURATION OPTIONS
|
|
;
|
|
CPUOSC .EQU 18432000 ; CPU OSC FREQ
|
|
MEMMGR .EQU MM_Z180 ; MM_NONE, MM_SBC, MM_Z2, MM_N8, MM_Z180
|
|
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
|
DEFSERCFG .EQU SER_38400_8N1 ; DEFAULT SERIAL LINE CONFIG (SHOULD MATCH ABOVE)
|
|
INTMODE .EQU 2 ; 0=NONE, 1=INT MODE 1, 2=INT MODE 2
|
|
DIAGENABLE .EQU FALSE ; TRUE FOR DIAGNOSTIC CODE PORT OUTPUT
|
|
DIAGPORT .EQU $00 ; DIAGNOSTIC PORT ADDRESS
|
|
;
|
|
CRTACT .EQU FALSE ; CRT ACTIVATION AT STARTUP
|
|
VDAEMU .EQU EMUTYP_ANSI ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
|
;
|
|
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
|
;
|
|
HTIMENABLE .EQU FALSE ; TRUE FOR SIMH TIMER SUPPORT
|
|
SIMRTCENABLE .EQU FALSE ; SIMH CLOCK DRIVER
|
|
DSRTCENABLE .EQU TRUE ; DS-1302 CLOCK DRIVER
|
|
DSRTCMODE .EQU DSRTCMODE_STD ; DSRTCMODE_STD, DSRTCMODE_MFPIC
|
|
DSRTCCHG .EQU FALSE ; DS-1302 CONFIGURE CHARGE ON (TRUE) OR OFF (FALSE)
|
|
;
|
|
ASCIENABLE .EQU TRUE ; TRUE FOR Z180 ASCI SUPPORT
|
|
UARTENABLE .EQU TRUE ; TRUE FOR UART SUPPORT (ALMOST ALWAYS WANT THIS TO BE TRUE)
|
|
UARTOSC .EQU 1843200 ; UART OSC FREQUENCY
|
|
SIOENABLE .EQU FALSE ; TRUE FOR ZILOG SIO/2 SUPPORT
|
|
ACIAENABLE .EQU FALSE ; TRUE FOR MOTOROLA 6850 ACIA SUPPORT
|
|
;
|
|
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
|
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
|
NECENABLE .EQU FALSE ; TRUE FOR uPD7220 BOARD SUPPORT
|
|
TMSENABLE .EQU FALSE ; TRUE FOR N8 (TMS9918) VIDEO/KBD SUPPORT
|
|
VGAENABLE .EQU FALSE ; TRUE FOR VGA VIDEO/KBD SUPPORT
|
|
;
|
|
SPKENABLE .EQU FALSE ; TRUE FOR RTC LATCH IOBIT SOUND
|
|
AYENABLE .EQU FALSE ; TRUE FOR AY PSG SOUND
|
|
;
|
|
MDENABLE .EQU TRUE ; TRUE FOR ROM/RAM DISK SUPPORT (ALMOST ALWAYS WANT THIS ENABLED)
|
|
MDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF MDENABLE = TRUE)
|
|
;
|
|
FDENABLE .EQU FALSE ; TRUE FOR FLOPPY SUPPORT
|
|
FDMODE .EQU FDMODE_N8 ; FDMODE_DIO, FDMODE_ZETA, FDMODE_DIDE, FDMODE_N8, FDMODE_DIO3
|
|
FDTRACE .EQU 1 ; 0=SILENT, 1=FATAL ERRORS, 2=ALL ERRORS, 3=EVERYTHING (ONLY RELEVANT IF FDENABLE = TRUE)
|
|
FDMEDIA .EQU FDM144 ; FDM720, FDM144, FDM360, FDM120 (ONLY RELEVANT IF FDENABLE = TRUE)
|
|
FDMEDIAALT .EQU FDM720 ; ALTERNATE MEDIA TO TRY, SAME CHOICES AS ABOVE (ONLY RELEVANT IF FDMAUTO = TRUE)
|
|
FDMAUTO .EQU TRUE ; SELECT BETWEEN MEDIA OPTS ABOVE AUTOMATICALLY
|
|
;
|
|
RFENABLE .EQU FALSE ; TRUE FOR RAM FLOPPY SUPPORT
|
|
RFCNT .EQU 1 ; NUMBER OF RAM FLOPPY UNITS
|
|
;
|
|
IDEENABLE .EQU TRUE ; TRUE FOR IDE SUPPORT
|
|
IDEMODE .EQU IDEMODE_MK4 ; IDEMODE_DIO, IDEMODE_DIDE, IDEMODE_MK4
|
|
IDECNT .EQU 2 ; NUMBER OF IDE UNITS
|
|
IDETRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
|
IDE8BIT .EQU TRUE ; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
|
|
;
|
|
PPIDEENABLE .EQU FALSE ; TRUE FOR PPIDE SUPPORT (DO NOT COMBINE WITH DSKYENABLE)
|
|
PPIDEMODE .EQU PPIDEMODE_DIO3 ; PPIDEMODE_SBC, PPPIDEMODE_DIO3, PPIDEMODE_MFP, PPIDEMODE_N8, PPIDEMODE_RC
|
|
PPIDECNT .EQU 1 ; NUMBER OF PPIDE UNITS
|
|
PPIDETRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPIDEENABLE = TRUE)
|
|
PPIDE8BIT .EQU FALSE ; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
|
|
PPIDESLOW .EQU FALSE ; ADD DELAYS TO HELP PROBLEMATIC HARDWARE (TRY THIS IF PPIDE IS UNRELIABLE)
|
|
;
|
|
SDENABLE .EQU TRUE ; TRUE FOR SD SUPPORT
|
|
SDMODE .EQU SDMODE_MK4 ; SDMODE_JUHA, SDMODE_CSIO, SDMODE_UART, SDMODE_PPI, SDMODE_DSD, SDMODE_MK4
|
|
SDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
|
SDCSIOFAST .EQU TRUE ; TABLE-DRIVEN BIT INVERTER
|
|
;
|
|
PRPENABLE .EQU FALSE ; TRUE FOR PROPIO SUPPORT
|
|
PRPSDENABLE .EQU TRUE ; TRUE FOR PROPIO SD SUPPORT
|
|
PRPSDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PRPSDENABLE = TRUE)
|
|
PRPCONENABLE .EQU TRUE ; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
|
|
;
|
|
PPPENABLE .EQU FALSE ; TRUE FOR PARPORTPROP SUPPORT
|
|
PPPSDENABLE .EQU TRUE ; TRUE FOR PARPORTPROP SD SUPPORT
|
|
PPPSDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPPENABLE = TRUE)
|
|
PPPCONENABLE .EQU TRUE ; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
|
|
;
|
|
HDSKENABLE .EQU FALSE ; TRUE FOR SIMH HDSK SUPPORT
|
|
HDSKTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
|
;
|
|
PPKTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPKENABLE = TRUE)
|
|
KBDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF KBDENABLE = TRUE)
|
|
PPKKBLOUT .EQU KBD_US ; KEYBOARD LANGUAGE (US/DE)
|
|
KBDKBLOUT .EQU KBD_US ; KEYBOARD LANGUAGE (US/DE)
|
|
;
|
|
TERMENABLE .EQU FALSE ; TERM PSEUDO DEVICE, WILL BE ENABLED IF A VDA IS ENABLED
|
|
ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABLE = TRUE)
|
|
;
|
|
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
|
BOOT_TIMEOUT .EQU 20 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
|
BOOT_DEFAULT .EQU 'Z' ; SELECTION TO INVOKE AT TIMEOUT
|
|
;
|
|
; 18.432MHz OSC @ FULL SPEED
|
|
;
|
|
Z180_CLKDIV .EQU 1 ; 0=OSC/2, 1=OSC, 2=OSC*2
|
|
Z180_MEMWAIT .EQU 0 ; MEMORY WAIT STATES (0-3)
|
|
Z180_IOWAIT .EQU 1 ; ADD (0-3) I/O WAIT STATES ABOVE 1 W/S BUILT-IN
|
|
;
|
|
; 18.432MHz OSC @ DOUBLE SPEED
|
|
;
|
|
;Z180_CLKDIV .EQU 2 ; 0=OSC/2, 1=OSC, 2=OSC*2
|
|
;Z180_MEMWAIT .EQU 1 ; MEMORY WAIT STATES (0-3)
|
|
;Z180_IOWAIT .EQU 1 ; ADD (0-3) I/O WAIT STATES ABOVE 1 W/S BUILT-IN
|
|
;
|
|
PIO_4P .EQU FALSE ; TRUE FOR ECB-4PIO PIO SUPPORT
|
|
PIO_ZP .EQU FALSE ; TRUE FOR ECB-ZILOG PERIPHERALS BOARD
|
|
PPI_SBC .EQU FALSE ; TRUE FOR SBC V2 8255 (IF NOT BEING USED FOR PPIDE)
|
|
;
|
|
UFENABLE .EQU FALSE ; TRUE FOR ECB USB-FIFO SUPPORT
|
|
|
|
|