mirror of https://github.com/wwarthen/RomWBW.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
111 lines
5.6 KiB
111 lines
5.6 KiB
;
|
|
;==================================================================================================
|
|
; ROMWBW 2.X CONFIGURATION FOR N8 2312
|
|
;==================================================================================================
|
|
;
|
|
; BUILD CONFIGURATION OPTIONS
|
|
;
|
|
CPUOSC .EQU 18432000 ; CPU OSC FREQ
|
|
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB, MUST MATCH YOUR HARDWARE!!!
|
|
CONBAUD .EQU 38400 ; DEFAULT BAUDRATE USED BELOW
|
|
;
|
|
CRTACT .EQU FALSE ; CRT ACTIVATION AT STARTUP
|
|
VDAEMU .EQU EMUTYP_TTY ; DEFAULT VDA EMULATION (EMUTYP_TTY, EMUTYP_ANSI, ...)
|
|
;
|
|
DSKYENABLE .EQU FALSE ; TRUE FOR DSKY SUPPORT (DO NOT COMBINE WITH PPIDE)
|
|
;
|
|
SIMRTCENABLE .EQU FALSE ; SIMH CLOCK DRIVER
|
|
DSRTCENABLE .EQU TRUE ; DS-1302 CLOCK DRIVER
|
|
DSRTCMODE .EQU DSRTCMODE_STD ; DSRTCMODE_STD, DSRTCMODE_MFPIC
|
|
;
|
|
UARTENABLE .EQU FALSE ; TRUE FOR UART SUPPORT (N8 USES ASCI DRIVER)
|
|
UARTCNT .EQU 0 ; NUMBER OF UARTS
|
|
;
|
|
ASCIENABLE .EQU TRUE ; TRUE FOR Z180 ASCI SUPPORT
|
|
ASCI0BAUD .EQU CONBAUD ; ASCI0 BAUDRATE (IMPLEMENTED BY Z180_ASCIB0)
|
|
ASCI1BAUD .EQU CONBAUD ; ASCI1 BAUDRATE (IMPLEMENTED BY Z180_ASCIB1)
|
|
;
|
|
VDUENABLE .EQU FALSE ; TRUE FOR VDU BOARD SUPPORT
|
|
CVDUENABLE .EQU FALSE ; TRUE FOR CVDU BOARD SUPPORT
|
|
UPD7220ENABLE .EQU FALSE ; TRUE FOR uPD7220 BOARD SUPPORT
|
|
SCGENABLE .EQU FALSE ; TRUE FOR N8 (TMS9918) VIDEO/KBD SUPPORT
|
|
;
|
|
MDENABLE .EQU TRUE ; TRUE FOR ROM/RAM DISK SUPPORT (ALMOST ALWAYS WANT THIS ENABLED)
|
|
MDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF MDENABLE = TRUE)
|
|
;
|
|
FDENABLE .EQU TRUE ; TRUE FOR FLOPPY SUPPORT
|
|
FDMODE .EQU FDMODE_DIO3 ; FDMODE_DIO, FDMODE_ZETA, FDMODE_DIDE, FDMODE_N8, FDMODE_DIO3
|
|
FDTRACE .EQU 1 ; 0=SILENT, 1=FATAL ERRORS, 2=ALL ERRORS, 3=EVERYTHING (ONLY RELEVANT IF FDENABLE = TRUE)
|
|
FDMEDIA .EQU FDM144 ; FDM720, FDM144, FDM360, FDM120 (ONLY RELEVANT IF FDENABLE = TRUE)
|
|
FDMEDIAALT .EQU FDM720 ; ALTERNATE MEDIA TO TRY, SAME CHOICES AS ABOVE (ONLY RELEVANT IF FDMAUTO = TRUE)
|
|
FDMAUTO .EQU TRUE ; SELECT BETWEEN MEDIA OPTS ABOVE AUTOMATICALLY
|
|
;
|
|
RFENABLE .EQU FALSE ; TRUE FOR RAM FLOPPY SUPPORT
|
|
RFCNT .EQU 1 ; NUMBER OF RAM FLOPPY UNITS
|
|
;
|
|
IDEENABLE .EQU FALSE ; TRUE FOR IDE SUPPORT
|
|
IDEMODE .EQU IDEMODE_MK4 ; IDEMODE_DIO, IDEMODE_DIDE, IDEMODE_MK4
|
|
IDECNT .EQU 1 ; NUMBER OF IDE UNITS
|
|
IDETRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
|
IDE8BIT .EQU TRUE ; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
|
|
IDECAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
|
;
|
|
PPIDEENABLE .EQU TRUE ; TRUE FOR PPIDE SUPPORT (DO NOT COMBINE WITH DSKYENABLE)
|
|
PPIDEIOB .EQU $20 ; PPIDE IOBASE
|
|
PPIDECNT .EQU 2 ; NUMBER OF PPIDE UNITS
|
|
PPIDETRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPIDEENABLE = TRUE)
|
|
PPIDE8BIT .EQU FALSE ; USE IDE 8BIT TRANSFERS (PROBABLY ONLY WORKS FOR CF CARDS!)
|
|
PPIDECAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
|
PPIDESLOW .EQU FALSE ; ADD DELAYS TO HELP PROBLEMATIC HARDWARE (TRY THIS IF PPIDE IS UNRELIABLE)
|
|
;
|
|
SDENABLE .EQU FALSE ; TRUE FOR SD SUPPORT
|
|
SDMODE .EQU SDMODE_MK4 ; SDMODE_JUHA, SDMODE_CSIO, SDMODE_UART, SDMODE_PPI, SDMODE_DSD, SDMODE_MK4
|
|
SDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
|
SDCAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
|
SDCSIOFAST .EQU FALSE ; TABLE-DRIVEN BIT INVERTER
|
|
;
|
|
PRPENABLE .EQU FALSE ; TRUE FOR PROPIO SUPPORT
|
|
PRPIOB .EQU $A8 ; PORT IO ADDRESS BASE
|
|
PRPSDENABLE .EQU TRUE ; TRUE FOR PROPIO SD SUPPORT
|
|
PRPSDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PRPSDENABLE = TRUE)
|
|
PRPSDCAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
|
PRPCONENABLE .EQU TRUE ; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
|
|
;
|
|
PPPENABLE .EQU FALSE ; TRUE FOR PARPORTPROP SUPPORT
|
|
PPPSDENABLE .EQU TRUE ; TRUE FOR PARPORTPROP SD SUPPORT
|
|
PPPSDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPPENABLE = TRUE)
|
|
PPPSDCAPACITY .EQU 64 ; CAPACITY OF PPP SD DEVICE (IN MB)
|
|
PPPCONENABLE .EQU TRUE ; TRUE FOR PROPIO CONSOLE SUPPORT (PS/2 KBD & VGA VIDEO)
|
|
;
|
|
HDSKENABLE .EQU FALSE ; TRUE FOR SIMH HDSK SUPPORT
|
|
HDSKTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF IDEENABLE = TRUE)
|
|
HDSKCAPACITY .EQU 64 ; CAPACITY OF DEVICE (IN MB)
|
|
;
|
|
PPKENABLE .EQU FALSE ; TRUE FOR PARALLEL PORT KEYBOARD
|
|
PPKTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF PPKENABLE = TRUE)
|
|
KBDENABLE .EQU FALSE ; TRUE FOR PS/2 KEYBOARD ON I8242
|
|
KBDTRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF KBDENABLE = TRUE)
|
|
;
|
|
TTYENABLE .EQU FALSE ; INCLUDE TTY EMULATION SUPPORT
|
|
ANSIENABLE .EQU FALSE ; INCLUDE ANSI EMULATION SUPPORT
|
|
ANSITRACE .EQU 1 ; 0=SILENT, 1=ERRORS, 2=EVERYTHING (ONLY RELEVANT IF ANSIENABLE = TRUE)
|
|
;
|
|
BOOTTYPE .EQU BT_MENU ; BT_MENU (WAIT FOR KEYPRESS), BT_AUTO (BOOT_DEFAULT AFTER BOOT_TIMEOUT SECS)
|
|
BOOT_TIMEOUT .EQU 21 ; APPROX TIMEOUT IN SECONDS FOR AUTOBOOT, 0 FOR IMMEDIATE
|
|
BOOT_DEFAULT .EQU 'Z' ; SELECTION TO INVOKE AT TIMEOUT
|
|
;
|
|
; 18.432MHz OSC @ FULL SPEED, 38.4Kbps
|
|
;
|
|
Z180_CLKDIV .EQU 1 ; 0=OSC/2, 1=OSC, 2=OSC*2
|
|
Z180_MEMWAIT .EQU 0 ; MEMORY WAIT STATES TO INSERT (0-3)
|
|
Z180_IOWAIT .EQU 1 ; IO WAIT STATES TO INSERT (0-3)
|
|
Z180_ASCIB0 .EQU 20H ; SERIAL PORT 0 DIV, SEE Z180 CLOCKING DOCUMENT
|
|
Z180_ASCIB1 .EQU 20H ; SERIAL PORT 1 DIV, SEE Z180 CLOCKING DOCUMENT
|
|
;
|
|
; 18.432MHz OSC @ DOUBLE SPEED, 38.4Kbps
|
|
;
|
|
;Z180_CLKDIV .EQU 2 ; 0=OSC/2, 1=OSC, 2=OSC*2
|
|
;Z180_MEMWAIT .EQU 1 ; MEMORY WAIT STATES TO INSERT (0-3)
|
|
;Z180_IOWAIT .EQU 2 ; IO WAIT STATES TO INSERT (0-3)
|
|
;Z180_ASCIB0 .EQU 21H ; SERIAL PORT 0 DIV, SEE Z180 CLOCKING DOCUMENT
|
|
;Z180_ASCIB1 .EQU 21H ; SERIAL PORT 1 DIV, SEE Z180 CLOCKING DOCUMENT
|
|
|