mirror of https://github.com/wwarthen/RomWBW.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
150 lines
7.3 KiB
150 lines
7.3 KiB
;
|
|
;==================================================================================================
|
|
; ROMWBW 2.X CONFIGURATION FOR MARK IV
|
|
;==================================================================================================
|
|
;
|
|
; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
|
|
; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED. INSTEAD, YOU SHOULD
|
|
; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
|
|
; UNDER THIS DIRECTORY.
|
|
;
|
|
; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
|
|
; FOR THE PLATFORM.
|
|
;
|
|
#DEFINE PLATFORM_NAME "MARK IV"
|
|
;
|
|
PLATFORM .EQU PLT_MK4 ; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SC126]
|
|
CPUFAM .EQU CPU_Z180 ; CPU FAMILY: CPU_[Z80|Z180]
|
|
BIOS .EQU BIOS_WBW ; HARDWARE BIOS: BIOS_[WBW|UNA]
|
|
BATCOND .EQU FALSE ; ENABLE LOW BATTERY WARNING MESSAGE
|
|
;
|
|
BOOTTYPE .EQU BT_MENU ; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
|
|
BOOT_TIMEOUT .EQU 20 ; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT
|
|
BOOT_DEFAULT .EQU 'Z' ; AUTO BOOT SELECTION TO INVOKE AT TIMEOUT
|
|
;
|
|
CPUOSC .EQU 18432000 ; CPU OSC FREQ IN MHZ
|
|
INTMODE .EQU 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
|
|
DEFSERCFG .EQU SER_38400_8N1 ; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
|
|
;
|
|
RAMSIZE .EQU 512 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
MEMMGR .EQU MM_Z180 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180]
|
|
RAMBIAS .EQU 512 ; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
|
|
;
|
|
Z180_BASE .EQU $40 ; Z180: I/O BASE ADDRESS FOR INTERNAL REGISTERS
|
|
Z180_CLKDIV .EQU 1 ; Z180: CHK DIV: 0=OSC/2, 1=OSC, 2=OSC*2
|
|
Z180_MEMWAIT .EQU 0 ; Z180: MEMORY WAIT STATES (0-3)
|
|
Z180_IOWAIT .EQU 1 ; Z180: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
|
|
;
|
|
MK4_IDE .EQU $80 ; MK4: IDE REGISTERS BASE ADR
|
|
MK4_XAR .EQU $88 ; MK4: EXTERNAL ADDRESS REGISTER (XAR) ADR
|
|
MK4_SD .EQU $89 ; MK4: SD CARD CONTROL REGISTER ADR
|
|
MK4_RTC .EQU $8A ; MK4: RTC LATCH REGISTER ADR
|
|
;
|
|
RTCIO .EQU MK4_RTC ; RTC LATCH REGISTER ADR
|
|
;
|
|
KIOENABLE .EQU FALSE ; ENABLE ZILOG KIO SUPPORT
|
|
KIOBASE .EQU $80 ; KIO BASE I/O ADDRESS
|
|
;
|
|
CTCENABLE .EQU FALSE ; ENABLE ZILOG CTC SUPPORT
|
|
;
|
|
DIAGENABLE .EQU FALSE ; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
|
|
DIAGPORT .EQU $00 ; DIAGNOSTIC PORT ADDRESS
|
|
DIAGDISKIO .EQU TRUE ; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
|
|
;
|
|
LEDENABLE .EQU FALSE ; ENABLES STATUS LED (SINGLE LED)
|
|
LEDPORT .EQU $0E ; STATUS LED PORT ADDRESS
|
|
LEDDISKIO .EQU TRUE ; ENABLES DISK I/O ACTIVITY ON STATUS LED
|
|
;
|
|
DSKYENABLE .EQU FALSE ; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
|
|
;
|
|
CRTACT .EQU FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
VDAEMU .EQU EMUTYP_ANSI ; VDA EMULATION: EMUTYP_[TTY|ANSI]
|
|
ANSITRACE .EQU 1 ; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
PPKTRACE .EQU 1 ; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
KBDTRACE .EQU 1 ; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
PPKKBLOUT .EQU KBD_US ; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
|
|
KBDKBLOUT .EQU KBD_US ; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
|
|
;
|
|
HTIMENABLE .EQU FALSE ; ENABLE SIMH TIMER SUPPORT
|
|
SIMRTCENABLE .EQU FALSE ; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
|
|
;
|
|
DSRTCENABLE .EQU TRUE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
|
|
DSRTCMODE .EQU DSRTCMODE_STD ; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
|
|
DSRTCCHG .EQU FALSE ; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
|
|
;
|
|
UARTENABLE .EQU TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
|
|
UARTOSC .EQU 1843200 ; UART: OSC FREQUENCY IN MHZ
|
|
UARTSBC .EQU FALSE ; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
|
|
UARTCAS .EQU TRUE ; UART: AUTO-DETECT ECB CASSETTE UART
|
|
UARTMFP .EQU FALSE ; UART: AUTO-DETECT MF/PIC UART
|
|
UART4 .EQU TRUE ; UART: AUTO-DETECT 4UART UART
|
|
;
|
|
ASCIENABLE .EQU TRUE ; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
|
|
ASCI0CFG .EQU DEFSERCFG ; ASCI 0: SERIAL LINE CONFIG
|
|
ASCI1CFG .EQU DEFSERCFG ; ASCI 1: SERIAL LINE CONFIG
|
|
;
|
|
ACIAENABLE .EQU FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
|
|
;
|
|
SIOENABLE .EQU FALSE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
;
|
|
VDUENABLE .EQU FALSE ; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
|
|
VDUSIZ .EQU V80X25 ; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
|
|
CVDUENABLE .EQU FALSE ; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
|
|
NECENABLE .EQU FALSE ; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
|
|
TMSENABLE .EQU FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
|
|
TMSMODE .EQU TMSMODE_SCG ; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
|
|
VGAENABLE .EQU FALSE ; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
|
|
;
|
|
SPKENABLE .EQU FALSE ; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
|
|
;
|
|
AYENABLE .EQU FALSE ; AY: ENABLE AY PSG SOUND DRIVER
|
|
AYMODE .EQU AYMODE_SCG ; AY: DRIVER MODE: AYMODE_[SCG/N8/RCZ80/RCZ180]
|
|
;
|
|
MDENABLE .EQU TRUE ; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
|
|
MDTRACE .EQU 1 ; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
;
|
|
FDENABLE .EQU FALSE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
|
|
FDMODE .EQU FDMODE_N8 ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|DIDE|N8|DIO3]
|
|
FDTRACE .EQU 1 ; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
|
|
FDMEDIA .EQU FDM144 ; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
|
|
FDMEDIAALT .EQU FDM720 ; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
|
|
FDMAUTO .EQU TRUE ; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
|
|
;
|
|
RFENABLE .EQU FALSE ; RF: ENABLE RAM FLOPPY DRIVER
|
|
RFCNT .EQU 1 ; RF: NUMBER OF RAM FLOPPY UNITS (1-2)
|
|
;
|
|
IDEENABLE .EQU TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
|
|
IDEMODE .EQU IDEMODE_MK4 ; IDE: DRIVER MODE: IDEMODE_[DIO|DIDE]
|
|
IDETRACE .EQU 1 ; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
IDE8BIT .EQU TRUE ; IDE: USE 8-BIT TRANSFERS (CF CARDS MOSTLY)
|
|
;
|
|
PPIDEENABLE .EQU FALSE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
|
|
PPIDEMODE .EQU PPIDEMODE_DIO3 ; PPIDE: DRIVER MODE: PPIDEMODE_[SBC|DIO3|MFP|N8|RC]
|
|
PPIDETRACE .EQU 1 ; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
PPIDE8BIT .EQU FALSE ; PPIDE: USE 8-BIT TRANSFERS (CF CARDS MOSTLY)
|
|
;
|
|
SDENABLE .EQU TRUE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
|
|
SDMODE .EQU SDMODE_MK4 ; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC126]
|
|
SDTRACE .EQU 1 ; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
SDCSIOFAST .EQU TRUE ; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
|
|
;
|
|
PRPENABLE .EQU FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
|
|
PRPSDENABLE .EQU TRUE ; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
|
|
PRPSDTRACE .EQU 1 ; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
PRPCONENABLE .EQU TRUE ; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
|
|
;
|
|
PPPENABLE .EQU FALSE ; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
|
|
PPPSDENABLE .EQU TRUE ; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
|
|
PPPSDTRACE .EQU 1 ; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
|
|
PPPCONENABLE .EQU TRUE ; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
|
|
;
|
|
HDSKENABLE .EQU FALSE ; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
|
|
;
|
|
PIO_4P .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
|
|
PIO4BASE .EQU $90 ; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
|
|
PIO_ZP .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
|
|
PIOZBASE .EQU $88 ; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
|
|
PPI_SBC .EQU FALSE ; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
|
|
;
|
|
UFENABLE .EQU FALSE ; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
|
|
UFBASE .EQU $0C ; UF: REGISTERS BASE ADR
|
|
|