mirror of
https://github.com/wwarthen/RomWBW.git
synced 2026-02-06 14:11:48 -06:00
39f796ce22
The EtchedPixels floppy disk controller is known by the identifier 'FDMODE_EPFDC', but the comments in the Config subdirectory have an incorrect reference to 'EPWDC'. This fix updates the comments to use the correct name.
81 lines
4.2 KiB
NASM
81 lines
4.2 KiB
NASM
;
|
|
;==================================================================================================
|
|
; RCBUS Z280 STANDARD CONFIGURATION (NATIVE Z280 MMU W/ LINEAR MEMORY ON ZZRC)
|
|
;==================================================================================================
|
|
;
|
|
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
|
|
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS
|
|
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE
|
|
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
|
|
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
|
|
; YOUR FILE IN THE BUILD PROCESS.
|
|
;
|
|
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
|
|
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
|
|
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
|
|
; SETTINGS.
|
|
;
|
|
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
|
|
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
|
|
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
|
|
;
|
|
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
|
|
; DIRECTORIES ABOVE THIS ONE).
|
|
;
|
|
#DEFINE PLATFORM_NAME "ZZRC", " [", CONFIG, "]"
|
|
;
|
|
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
|
|
;
|
|
#include "cfg_rcz280.asm"
|
|
;
|
|
CPUOSC .SET 14745600 ; CPU OSC FREQ IN MHZ
|
|
INTMODE .SET 3 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2
|
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
;
|
|
FPLED_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL LEDS
|
|
FPSW_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL SWITCHES
|
|
;
|
|
MEMMGR .SET MM_Z280 ; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280]
|
|
;
|
|
RAMSIZE .SET 256 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
ROMSIZE .SET 256 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
ROMSIZE_CHK .SET 256 ; ROMSIZE VALUE VERIFICATION (0=DISABLED)
|
|
;
|
|
RAMLOC .SET 18 ; START OF RAM AS POWER OF 2 (2^N) IN PHYSICAL ADDRESS SPACE
|
|
RAMBIAS .SET (1 << (RAMLOC - 10)) ; OFFSET OF START OF RAM IN PHYSICAL ADDRESS SPACE
|
|
;
|
|
Z280_MEMLOWAIT .SET 0 ; Z280: LOW 8MB MEMORY WAIT STATES (0-3)
|
|
Z280_MEMHIWAIT .SET 0 ; Z280: HIGH 8MB MEMORY WAIT STATES (0-3)
|
|
Z280_IOWAIT .SET 1 ; Z280: I/O WAIT STATES TO ADD ABOVE 1 W/S BUILT-IN (0-3)
|
|
Z280_INTWAIT .SET 0 ; Z280: INT ACK WAIT STATUS (0-3)
|
|
;
|
|
MDROM .SET TRUE ; MD: ENABLE ROM DISK
|
|
MDRAM .SET FALSE ; MD: ENABLE RAM DISK
|
|
;
|
|
Z2UENABLE .SET TRUE ; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
|
|
Z2UOSC .SET (CPUOSC / 8) ; Z2U: OSC FREQUENCY IN MHZ
|
|
Z2U0HFC .SET TRUE ; Z2U0: ENABLE HARDWARE FLOW CONTROL
|
|
UARTENABLE .SET TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
|
|
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
|
|
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
;
|
|
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
|
|
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
|
|
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
|
|
VRCENABLE .SET TRUE ; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
|
|
VDAEMU_SERKBD .SET $FF ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
|
|
;
|
|
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER
|
|
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
|
|
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER
|
|
;
|
|
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
|
|
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
|
|
;
|
|
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
|
|
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
|
|
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
|
|
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
|
|
;
|
|
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
|