RomWBW/Source/Images/d_zpm3/u10/VLU.HLP

:VLU106
Copyright 1987, 1988 Esoteric Software                  Michal Carson


This program is distributed through ZSIG.




VLU is a ZCPR3-specific library utility with crunch, uncrunch, and
unsqueeze capabilities.  It will allow the user to view,
uncompress, or extract library members or to view, uncompress
(uncrunch or unsqueeze, VLU will decide), or crunch disk files.
VLU will build libraries from disk files, crunching the files as
they are added.  Date and time stamping is supported.

The utility will display a list of disk files on the screen along
with a cursor and other information.  Placing the cursor next to
the name of a file with the extension .LBR and pressing 'O' for
Open will display the contents of the library and shift the cursor
into that directory.


What is a Library?


The Library file format was developed to overcome two persistent
limitations of CP/M disk storage capacity: limited directory
entries and large blocking.

Although CP/M writes files in units of 128 bytes (sectors), most
manufacturers have used larger blocks for storage on disk.  On a
Kaypro with double-sided disks, for instance, all files are stored
in 2K blocks; even a file one sector in length will occupy 2K on
the disk.  Because the Kaypro disk format allows only 64 directory
entries (files) on one disk, 64 of these 1-sector files (8K) will
fill a 390K disk.

In a library, a one sector file occupies one sector (plus 32 bytes
for internal directory information).  The library itself occupies
only one directory entry on the disk.  If 64 one-sector files are
placed into a library, the library will occupy 10K.

This is obviously an extreme example but illustrates the
usefulness of libraries.  Other reasons exist; for instance,
libraries keep related files together.  VLU will make files within
libraries more accessible.


What is an ARC?  Which is better?


An ARC is another popular format for storing files in reduced space.
ARCs store files sequentially each preceded by its own header of
information which may be 18 to 29 bytes.  LBRs use a 32 byte
directory entry at the beginning of the LBR; the directory
indicates where the matching file may be found.

The information stored in an ARC file header is similar to the
information stored in an LBR directory.  Both formats store the
file name, exact file length, the last modification date and time,
and a CRC-16 for integrity.  LBRs also store the file's creation
date and time.

There are many arguments in favor of each format.  To the casual 
user, these arguments are not important and either format will 
serve for any purpose--long-term or short, organizational, 
archival, or for transfer.  Neither format is an effective storage 
format for sequential access devices such as tape.  Anyone who 
insists on the absolute superiority of one format over the other 
is behaving parochially.

VLU is the best effort to date in supporting the complete
Novosielski LBR definition.  A like effort expended on behalf of
the ARC format might make it similarly useful.


In this Library


Two executable versions are distributed:  VLUxxx-R.COM is for
machines using reverse video as highlighting.  VLUxxx-D.COM is for
machines using dim video as highlighting.  VLU.FOR is a short
description of the utility; VLU.HLP is full documentation
compatible with the ZCPR3 HELP text display utility.  VLU.UPD
contains a trail of the changes in VLU since its initial release.


The Help display


Pressing "/" or "?" will evoke a display summarizing the commands
available to the user.  These commands change according to Wheel
status and directory choice (e.g., Delete is not available in the
library and is never available to non-wheels).  Pressing either of
these keys a second time will clear the display.


Invoking VLU


Use VLU as an extension to a ZCPR3 shell, such as ZFiler, invoked
through a macro.  To install it, one need only open the ZFILER.CMD
file with a word processor and enter a line of the form "1 vlu".
Thereafter, positioning ZFiler's cursor beside a library file and
pressing "1" (possibly preceded by [esc]) will bring up VLU with
the library already open.  A better thought is to assign this
macro to the "O" key--"O $d1$u1:;vlu" in ZFILER.CMD--so that [esc]
"O" will open the indicated library.

Some aspects of VLU were designed to make it an extension of
tools like ZFiler.  Most of these tools use the ZCPR system files
to store the name of the current file (the file the cursor was
pointing to on exit).  VLU checks these filenames and interprets
the current file (sys file 2) as a library.  On starting up, VLU
will try to open a library file of this name in the current
directory.

This allows the user to invoke VLU from the "Z" prompt of ZFiler
or through a macro, pass no parameters, yet open the current file
if it is a library (or shares the same name as a library though it
may have a different extension).  If a different library is opened
before returning to ZFiler, VLU will modify the filename in
system file 2 (and thus cause ZFiler to believe it was pointing to
this library when it exited).

As a command file, VLU can, of course, be invoked from the system
command prompt.  If a library name is entered on the command line,
that name will take priority over any name currently in system
file 2 and the library will be opened if it exists.  Even from
ZFiler's "Z" prompt, with the pointer on ABC.LBR, entering the
command "VLU DEF" will open DEF.LBR and place that name into
system file 2.

If the invocation is followed by a DU: specification or by the
name of a ZCPR named directory (DIR:), VLU will display the
filenames in that directory instead of the default directory.
That is, "VLU TOOLS:" will display the contents of the TOOLS:
directory.

VLU can be re-entered with the GO command.


Changing libraries


When a library is opened, when VLU is invoked with a library name
in the command line, or when a new directory is logged in with a
library open, the VLU cursor will point into the library
directory.  Pressing the [esc] key will shift the cursor back into
the disk directory.  Opening a different library is as simple as
positioning the cursor in front of the name and pressing "O".


Cursor motion


Moving the cursor (pointer) in VLU is effected using the WordStar
cursor motion controls.  Ctrl-E moves the cursor up one line, ctrl-
X moves it down.  Ctrl-S moves the cursor left one file, ctrl-D
moves it right.  Ctrl-F brings a new directory onscreen if there
are more files in the directory (as if the display were moving
right by a directory), ctrl-A moves back toward the beginning of
the file list.  Ctrl-F will wrap around from the final directory
to the original.

The arrow keys will also function if they are properly defined in
the users Environment descriptor.  The symbols "+" and "-" (and
"=", the usual non-shifted counterpart of "+") have the same
effect on the directories as ctrl-F and ctrl-A, respectively.

The [esc] key shifts directories: from the library to the disk,
from the disk to library.  In most instances the cursor will
"remember" where it was when it last pointed into that directory.


Extracting and Uncompressing library members


Positioning the cursor beside the name of a member file within a
library and pressing "E" for Extract will cause the file to be
copied from the library to the disk with no change in form.  If it
is crunched or squeezed within the library, it will be crunched or
squeezed on the disk.

Pressing "U" for Uncompress will cause a crunched file to be
uncrunched onto the disk, a squeezed file to be unsqueezed onto the
disk, or an uncompressed file to be extracted sic.


Changing directories


Library members may be extracted to a disk and/or user area other
than the one which contains the library.  Open the library first,
then use the Login command to move to the destination directory
and perform the extraction or decompression.  The move is
accomplished by pressing "L" (cursor position makes no difference
with this command) and answering the prompt "Directory ".  The
user may enter a DU: specification (e.g., A0:, B14:, F:) or the
name of a ZCPR3 named directory to be found in the current system
(e.g., MODEM:, DUNGEON:).  The colon is not necessary in any case
and an invalid directory or denied access will relog the current
area.  No entry at all will also relog the current area to
facilitate disk changes.


Tagging files


The "T" command will tag an untagged file and the "Y" command will
remove the tag from a tagged file.  The tag appears as a hash (#)
immediately following the filename.  After a group operation
(actually, during the group operation) hard tags represented by
the hash are replaced by soft tags which appear as an apostrophe
(').  Soft tags may be transformed back into hard tags by the
retag command: "#".

Wildcard tagging is accomplished by pressing "W" and providing a
wildcard file specification in response to the prompt.  All files
in the directory, starting from the beginning, which match the
file spec will be tagged.

Group Tag ("GT") is equivalent to a *.* wildcard tag.

It may be convenient at times to untag all files.  This can be
accomplished by relogging the directory with the Login command.
Certain file operations which affect the disk directory (anything
that adds or deletes files) will also end by relogging the
directory and any remaining tags will be erased.  Group operations
obviously prevent this relogging until all files have been
operated upon.


Group operations


"G" will evoke the Group prompt.  From this prompt, several
commands are available to wheels.  Only the View and Tag commands
are available to non-wheels.  If the wheel byte is not zero, the
prompt will indicate by the first letter of each command that
View, Tag, Uncompress, crunch, and either Extract or Delete and
Build are available.  Any selection is carried out on all tagged
files.  The Group manager will check for ctrl-C between each file
and abort if it is seen.


Viewing files and library members


Crunched, squeezed, and uncompressed files may be viewed by 
pressing "V" at the VLU prompt.  The screen will clear and the 
file's name will appear at the top of the screen.  Just below the 
filename, the file's datestamps, if present, will be shown.  These 
will be taken from the disk in the case of ordinary text files, 
from the library directory if the file is a member, or from the 
internal datestamp of a compressed file.  The display will stop 
with the prompt "[strike any key]" after, in general, 22 lines.  
The number of lines (the size of a screen page) is taken from the 
ZCPR3 Environment descriptor.  The number provided there, by 
convention, is two lines less than the screen height.  This should 
give the viewer two lines of overlap with each page.  If this is 
unsatisfactory, the user's Environment descriptor can be adjusted.

At any time during the viewing, pressing ctrl-S will pause the
display.  Pressing ctrl-C will abort the operation.  Under Group
control, ctrl-C will abort the entire operation and no more files
will be presented; the user will be returned to the file directory
display.  Unscreened files will remain tagged.  Ctrl-X may be used
to skip to the next file under Group execution; it has the same
effect as ctrl-C if only one file is being viewed; id est, we
abort.

At the "[strike any key]" prompt, pressing the period will bring
one more logical line to the screen.

Ctrl-Z will suppress the "[strike any key]" prompt and the file
will scroll continuously.  The viewer is then left with ctrl-S to
stop the display (and any key except ctrl-X and ctrl-C will
restart it).  Another Ctrl-Z will restore the paging mode and
stop the screen immediately.  This is handy for long files when
the interesting text is near the end.

Certain file extensions are proscripted (e.g., COM, LBR, ARK, SYS,
RCP, REL, PRL, etc.) and VLU will give the message "may not type"
followed by the file name.  Crunched files of proscripted types 
may have a "stamp" of interest to the user.  If a proscripted file 
is crunched, VLU will give the filename as it appears and attempt 
to extract the original filename and any stamp contained in the 
first record of the file.  Thus, the datestamps of COM and REL 
files may be inspected using the View command.


Crunching disk files


The crunching faculty of VLU is incidental.  Because of the Group
operations, it is quite useful but, ab ovo, crunching files on 
disk has been secondary to the project of crunching files into 
libraries.  Selecting "K" at the command prompt will cause VLU to 
crunch the file pointed to by its cursor.

VLU will first prompt for a "stamp."  By convention, this is a
message of up to 40 characters enclosed in square brackets.  The
message is imbedded in the first record of the crunched file to be
displayed when the file is either uncrunched or viewed.  Often,
the message reports the date of the crunching, the author or
origin of the file, or its expanded size.

VLU will allow the entry of up to 38 characters.  Two characters
are reserved so that VLU can insert the square brackets if the
user omits one or both.  VLU will remove any trailing spaces from
the message; if the user wishes the spaces to appear, the user
must enter at least the final closing bracket.

VLU will also imbed the current datestamp of the file, if present, 
in the form established by CRUNCH23D.  To use the datestamp in 
place of a text stamp simply type a return at the "Enter stamp" 
prompt.

The crunching operation will be aborted if the file is already
compressed (either crunched or squeezed) or is of a proscripted
filetype.  Proscripted filetypes are ARC, ARK, BAD, and, if the 
target is a library, FOR and CIM (vide infra).

VLU will allow the user to crunch a member out of a library onto
the disk.  There seems no harm in such an operation (and as little
use).


File size report


The size of a file in kilobytes and sectors (records) is reported 
when the user presses either "F" or carriage return.  If the file 
is a library member, size is reported to the nearest higher 1K.  
If the file is on disk, size is reported according to the blocking 
factor of the disk.


Renaming files


To rename a library member or a disk file, position the cursor 
beside the file and press "R".  Enter the new name at the prompt.


Deleting files


To delete a library member or a disk file, position the cursor 
beside the file and press "D".  The user will be prompted to 
confirm that the file is to be deleted.  Under Group Delete, the 
first prompt applies to all tagged files.  Answering Yes to this 
prompt will delete all files with no further prompts.  Answering 
No will abort the operation entirely (no files deleted).  
Answering Verify will cause a prompt to appear for each file in 
the group.


Building libraries


In order for VLU to build a library, all files to be included
must be located in the same directory.  The library may, if
necessary, be built in a foreign directory.

As distributed, VLU will crunch all files as they are added to the
library (unless the extension is unacceptable as previously
stated).  See the configuration section for possible attenuation
of this practice.

VLU does have limits governing the maximum size library it may 
build or deal with.  Those limits will vary with the size of the 
current TPA.  Most users will never approach VLU's limits, but for 
curiosity's sake, a TPA of 58K is sufficient to manipulate a 
library of over 1200 members.

To initiate the construction, tag the files which are to be
included and then type "GB" for Group and Build.  VLU will prompt
for the name and directory of the "new library" and the number of
entries to allow.  A carriage return at the "entries" prompt will
build a library with the minimum directory size, only large enough
to accommodate the currently tagged files.  If you specify the 
number of members (say, 40), VLU will build a library large enough 
to hold at least this many members and will report the actual 
number of possible entries ("initializing 43 entries").

Rather than count the number of members you have tagged and add to 
that the number of members you expect to add in the future, you 
may simply enter "+40" to have VLU make the calculation.  VLU will 
build a library large enough to hold the presently tagged files 
and 40 more.  If no files are currently tagged, VLU will build an 
empty library large enough to hold at least 40 members.

VLU will then initialize the library directory area.  The
directory list (onscreen)  will be reset to the first screen; the
cursor will move to the first tagged file and a message will
display that the file is being crunched or added as appropriate.
If any files are to be crunched, the "stamp" prompt will appear
and the stamp thus entered will be in effect for all files
crunched into the library.

Under this operation, as under the Wildcard and other Group
operations, the directory list onscreen will shift through all
files searching for tags.  This will be more noticeable in larger
directories (which require more than one display) and during the
Building of libraries (because of the pause to close the library).

The datestamps for file creation date/time and file modification 
date/time will be copied into the library directory if they are 
available on the disk.  They may also be imbedded in crunched 
members (if no stamp is entered).  The current time/date will be 
placed in the library directory to indicate when the library was 
originally constructed.


Adding files to a Library


Adding files to an existing library is a simple as constructing 
the library in the first place and the files will be compressed 
according to the same rules.  Date/time stamps will be preserved.  
The current date/time will be written into the library directory 
to indicate the library's last modification.

Files may be added individually or tagged and added in a Group 
operation.  The library to which they will be added must be open 
and must have unused directory entries (deleted entries will not 
be overwritten).


Configuration


Several configuration bytes are located in the first sector of the 
VLU command file where they may be easily patched.  For the exact 
location and function of these bytes, see the accompanying file, 
VLUxxxC.Z80.


Option menu


The Option menu, accessed by typing "M" at the command prompt, 
will toggle many of the configuration bytes.  This allows 
temporary assignment of the options.


Security


The Login command of VLU will use the Z33 parser when it is
available, thus behaving exactly as the operating system would in
allowing admittance to directory areas.  When Z33 is not available,
VLU allows immediate entry to any du: or dir: within the MAXDSK
and MAXUSR limits of the environment.  Dir: forms outside these
limits are also accepted; passwords, if present, are enforced.

Commands Delete and Rename and any commands that would create new
files are available only while the wheel byte is set.


Contributors


VLU directly incorporates the work of many "better makers."  My
thanks to all of them as much and more for the opportunity to read
and learn from their code as well as for their library releases.
Among them, the following:

Richard Conn, Howard Goldstein, Jay Sage, Al Dunsmuir et al. for
SYSLIB, Z3LIB, Z33LIB and VLIB--and ZCPR, itself.

C.B. Falconer and Steven Greenberg for USQREL, UNCREL, CRN, and
BUFFERS.

Steven Cohen for M24.  Carson Wilson for DATEHL and Z80DOS.  
Bridger Mitchell for FRESET and CRUNCH23D.

Martin Murray for NULU, the standard for these efforts.  And Gary
Novosielski for the library format.


Note from the programmer


VLU, its source code, and its documentation are copyright 1987, 
1988 by Esoteric Software.  VLU is distributed for non-commercial 
use only; any commercial use or any re-distribution in association 
with a commercial product or package requires the prior written 
permission of the author.

I may be reached on Z-nodes 2 and 3--Al Hawley's Ladera and Jay
Sage's Newton Centre; both are available via PC-Pursuit.  I log
into these nodes approximately semi-weekly.  If it is important to
reach me sooner, my home Z-node is #58, operated by Kent Mason in
Oklahoma City (405/943-8638).