Config File Tuning

Binary/RomList.txt

@@ -170,7 +170,7 @@ RCZ80 w/ KIO (RCZ80_kio.rom):
  - Requires KIO module
  - Console on KIO primary serial port at 115200 baud
  - Includes support for Compact Flash Module
- - Support for PPIDE Module may be enabled in config
+ - Includes support for PPIDE Module
  - Support for Scott Baker SIO board may be enabled in config
  - Support for Scott Baker floppy controllers (SMC & WDC) may
    be enabled in config
@@ -179,7 +179,7 @@ RCZ180 (RCZ180_nat.rom & RCZ180_ext.rom):
  - Assumes CPU oscillator of 18.432 MHz
  - Console on Z180 onboard primary ASCI serial port at 115200 baud
  - Includes support for Compact Flash Module
- - Support for PPIDE Module may be enabled in config
+ - Includes support for PPIDE Module
  - Support for alternative serial modules may be enabled in config
  - Support for Scott Baker floppy controllers (SMC & WDC) may
    be enabled in config
@@ -195,7 +195,7 @@ SCZ180 (SCZ180_126.rom, SCZ180_130.rom, SCZ180_131.rom):
  - Assumes CPU oscillator of 18.432 MHz
  - Console on Z180 onboard primary ASCI serial port at 115200 baud
  - Includes support for Compact Flash Module
- - Support for PPIDE Module may be enabled in config
+ - Includes support for PPIDE Module
  - Support for alternative serial modules may be enabled in config
  - Support for Scott Baker floppy controllers (SMC & WDC) may
    be enabled in config
@@ -207,7 +207,8 @@ EZZ80 (EZZ80_std.rom):
  - Assumes CPU oscillator of 10.000 MHz
  - Console on primary SIO serial port at 115200 baud
  - Includes support for on-board SIO
- - Includes support for IDE via RC bus
+ - Includes support for RC2014 Compact Flash Module
+ - Includes support for rc2014 PPIDE Module
 
 DYNO (DYNO_std.rom):
  - Assumes CPU oscillator of 18.432 MHz

Source/HBIOS/Config/EZZ80_std.asm

@@ -25,3 +25,7 @@
 #include "cfg_ezz80.asm"
 ;
 CPUOSC		.SET	10000000	; CPU OSC FREQ IN MHZ
+;
+IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/cfg_dyno.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_ezz80.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT
@@ -122,7 +123,7 @@ FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
 ;
 RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
 ;
-IDEENABLE	.EQU	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
 IDE0MODE	.EQU	IDEMODE_RC	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]

Source/HBIOS/cfg_master.asm

@@ -15,6 +15,7 @@ CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_mk4.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_n8.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_rcz180.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_rcz80.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_sbc.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_scz180.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_zeta.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z80		; CPU_[Z80|Z180]: CPU FAMILY
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO] IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/cfg_zeta2.asm

@@ -18,6 +18,7 @@ CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
 HBIOS_MUTEX	.EQU	FALSE		; PREVENT REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
 ;
 BOOTTYPE	.EQU	BT_MENU		; BT_[MENU|AUTO], IF AUTO, BOOT DEFAULT AFTER TIMEOUT
 BOOT_TIMEOUT	.EQU	20		; AUTO BOOT TIMEOUT IN SECONDS, 0 FOR IMMEDIATE BOOT

Source/HBIOS/std.asm

@@ -292,10 +292,6 @@ V80X24B		.EQU	4	; ECB-VDU
 V80X43		.EQU	5	; ECB-VGA3
 V80X60		.EQU	6	; ECB-VGA3
 ;
-; FONTS
-;
-USELZSA2	.EQU	FALSE	; USE COMPRESSED FONTS.
-;
 ; KEYBOARD LAYOUTS
 ;
 KBD_US		.EQU	0	; US ENGLISH