Fix S100 Z180 Board LED Operation

- Status LED for S100 Z180 board was not enabled.  Credit to Jay Cotton for finding this.

Doc/ChangeLog.txt

@@ -18,6 +18,7 @@ Version 3.3
 - WBW: Preliminary support for Dan Werner's ESP32 MBC Module
 - WBW: Early support for Duodyne base system (CPU/UART/ROM/RAM/RTC/SPK)
 - M?C: Fixed XM to allow specifying HBIOS port for send operations
+- WBW: Fix S100 Z180 LED operation (credit to Jay Cotton for finding this issue)
 
 Version 3.2.1
 -------------

Source/HBIOS/cfg_s100.asm

@@ -77,7 +77,7 @@ FPSW_IO		.EQU	$00		; FP: PORT ADDRESS FOR FP SWITCHES
 ;
 DIAGLVL		.EQU	DL_CRITICAL	; ERROR LEVEL REPORTING
 ;
-LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED (SINGLE LED)
 LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED

Source/HBIOS/hbios.asm

@@ -105,13 +105,13 @@ MODCNT	.SET	MODCNT + 1
 ;
 ;
 #IF (FPLED_ENABLE)
-#DEFINE	DIAG(N)	PUSH AF
-  #DEFCONT \	LD A,N
-;  #DEFCONT \	OUT (DIAGPORT),A
-  #DEFCONT \	CALL	FP_SETLEDS
-  #DEFCONT \	POP AF
+  #DEFINE DIAG(N)	PUSH AF
+  #DEFCONT \		LD A,N
+;  #DEFCONT \		OUT (DIAGPORT),A
+  #DEFCONT \		CALL	FP_SETLEDS
+  #DEFCONT \		POP AF
 #ELSE
-#DEFINE	DIAG(N)	\;
+  #DEFINE		DIAG(N)	\;
 #ENDIF
 ;
 ; SCxxx: LED Port=0x0E, bit 2, inverted, dedicated port
@@ -119,31 +119,32 @@ MODCNT	.SET	MODCNT + 1
 ; Z80-512K: LED Port=0x6E, bit 0, inverted, dedicated port
 ; MBC: LED Port=0x70, bits 1-0, normal, shared w/ RTC port
 ; DUO: LED Port=0x94, bits 1-0, normal, shared w/ RTC port
+; S100: LED Port = $0E, bit 2, inverted, dedicated port
 ; 
 #IF (LEDENABLE)
   #IF (LEDMODE == LEDMODE_STD)
-#DEFINE	LED(N)	PUSH	AF
-  #DEFCONT \	LD	A,~N
-  #DEFCONT \	OUT	(LEDPORT),A
-  #DEFCONT \	POP	AF
+    #DEFINE LED(N)	PUSH	AF
+    #DEFCONT \		LD	A,~N
+    #DEFCONT \		OUT	(LEDPORT),A
+    #DEFCONT \		POP	AF
   #ENDIF
   #IF (LEDMODE == LEDMODE_RTC)
-#DEFINE LED(N)	PUSH	AF
-  #DEFCONT \	LD	A,(HB_RTCVAL)
-  #DEFCONT \	AND	%11111100
-  #DEFCONT \	OR	(N & %00000011)
-  #DEFCONT \	LD	(HB_RTCVAL),A
-  #DEFCONT \	OUT	(LEDPORT),A
-  #DEFCONT \	POP	AF
+    #DEFINE LED(N)	PUSH	AF
+    #DEFCONT \		LD	A,(HB_RTCVAL)
+    #DEFCONT \		AND	%11111100
+    #DEFCONT \		OR	(N & %00000011)
+    #DEFCONT \		LD	(HB_RTCVAL),A
+    #DEFCONT \		OUT	(LEDPORT),A
+    #DEFCONT \		POP	AF
   #ENDIF
 #ELSE
-#DEFINE	LED(N)	\;
+  #DEFINE LED(N)	\;
 #ENDIF
 ;
 #DEFINE SYSCHKERR(HB_ERR) \
-  #DEFCONT \	CALL	SYSCHKA
-  #DEFCONT \	LD	A,HB_ERR
-  #DEFCONT \	OR	A
+#DEFCONT \	CALL	SYSCHKA
+#DEFCONT \	LD	A,HB_ERR
+#DEFCONT \	OR	A
 ;
 ;
 ;