39f796ce22
The EtchedPixels floppy disk controller is known by the identifier 'FDMODE_EPFDC', but the comments in the Config subdirectory have an incorrect reference to 'EPWDC'. This fix updates the comments to use the correct name.
88 lines
4.6 KiB
NASM
88 lines
4.6 KiB
NASM
;
|
|
;==================================================================================================
|
|
; TINY Z80 STANDARD CONFIGURATION
|
|
;==================================================================================================
|
|
;
|
|
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
|
|
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS
|
|
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE
|
|
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
|
|
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
|
|
; YOUR FILE IN THE BUILD PROCESS.
|
|
;
|
|
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
|
|
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
|
|
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
|
|
; SETTINGS.
|
|
;
|
|
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
|
|
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
|
|
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
|
|
;
|
|
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
|
|
; DIRECTORIES ABOVE THIS ONE).
|
|
;
|
|
#DEFINE PLATFORM_NAME "Tiny-Z80", " [", CONFIG, "]"
|
|
;
|
|
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
|
|
;
|
|
#include "cfg_rcz80.asm"
|
|
;
|
|
PLATFORM .SET PLT_EZZ80 ; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC|RPH]
|
|
CPUOSC .SET 16000000 ; CPU OSC FREQ IN MHZ
|
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
INTMODE .SET 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
|
|
;
|
|
FPLED_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL LEDS
|
|
FPSW_ENABLE .SET TRUE ; FP: ENABLES FRONT PANEL SWITCHES
|
|
;
|
|
EIPCENABLE .SET TRUE ; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
|
|
WDOGMODE .SET WDOG_EZZ80 ; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
|
|
WDOGIO .SET $6F ; WATCHDOG REGISTER ADR
|
|
;
|
|
LEDENABLE .SET TRUE ; ENABLES STATUS LED (SINGLE LED)
|
|
LEDPORT .SET $6E ; STATUS LED PORT ADDRESS
|
|
;
|
|
DSRTCENABLE .SET TRUE ; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
|
|
RP5RTCENABLE .SET FALSE ; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
|
|
;
|
|
CTCENABLE .SET TRUE ; ENABLE ZILOG CTC SUPPORT
|
|
CTCBASE .SET $10 ; CTC BASE I/O ADDRESS
|
|
CTCTIMER .SET TRUE ; ENABLE CTC PERIODIC TIMER
|
|
CTCMODE .SET CTCMODE_CTR ; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
|
|
CTCOSC .SET 921600 ; CTC CLOCK FREQUENCY
|
|
;
|
|
UARTENABLE .SET TRUE ; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
|
|
ACIAENABLE .SET FALSE ; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
|
|
SIOENABLE .SET TRUE ; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
|
|
SIO0MODE .SET SIOMODE_STD ; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
|
|
SIO0BASE .SET $18 ; SIO 0: REGISTERS BASE ADR
|
|
SIO0ACLK .SET 1843200 ; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO0BCLK .SET 1843200 ; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO1ACLK .SET 7372800 ; SIO 1A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
SIO1BCLK .SET 7372800 ; SIO 1B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
|
|
DUARTENABLE .SET FALSE ; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
|
|
;
|
|
TMSENABLE .SET FALSE ; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
|
|
TMSTIMENABLE .SET FALSE ; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
|
|
TMSMODE .SET TMSMODE_MSX ; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MBC|MSX|MSX9958|MSXKBD|COLECO]
|
|
MKYENABLE .SET FALSE ; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
|
|
VRCENABLE .SET FALSE ; VRC: ENABLE VGARC VIDEO/KBD DRIVER (VRC.ASM)
|
|
VDAEMU_SERKBD .SET 0 ; VDA EMULATION: SERIAL KBD UNIT #, OR $FF FOR HW KBD
|
|
;
|
|
AY38910ENABLE .SET FALSE ; AY: AY-3-8910 / YM2149 SOUND DRIVER
|
|
AYMODE .SET AYMODE_RCZ80 ; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC]
|
|
SN76489ENABLE .SET FALSE ; SN: ENABLE SN76489 SOUND DRIVER
|
|
;
|
|
FDENABLE .SET TRUE ; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
|
|
FDMODE .SET FDMODE_RCWDC ; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC]
|
|
;
|
|
IDEENABLE .SET TRUE ; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
|
|
IDE0BASE .SET $90 ; IDE 0: IO BASE ADDRESS
|
|
PPIDEENABLE .SET TRUE ; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
|
|
SDENABLE .SET FALSE ; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
|
|
SDCNT .SET 1 ; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD/SC/MT SC ONLY
|
|
IMMENABLE .SET FALSE ; IMM: ENABLE IMM DISK DRIVER (IMM.ASM)
|
|
;
|
|
PRPENABLE .SET FALSE ; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
|