forked from MirrorRepos/RomWBW
8c4a3d2b3d
- Modified TMS driver to always imbed an uncompressed font. This is because I have found no reasonable way to decompress a font while an OS is still active without mangling some of the OSes RAM.
49 lines
2.2 KiB
NASM
49 lines
2.2 KiB
NASM
;
|
|
;==================================================================================================
|
|
; DUODYNE STANDARD CONFIGURATION
|
|
;==================================================================================================
|
|
;
|
|
; THE COMPLETE SET OF DEFAULT CONFIGURATION SETTINGS FOR THIS PLATFORM ARE FOUND IN THE
|
|
; CFG_<PLT>.ASM INCLUDED FILE WHICH IS FOUND IN THE PARENT DIRECTORY. THIS FILE CONTAINS
|
|
; COMMON CONFIGURATION SETTINGS THAT OVERRIDE THE DEFAULTS. IT IS INTENDED THAT YOU MAKE
|
|
; YOUR CUSTOMIZATIONS IN THIS FILE AND JUST INHERIT ALL OTHER SETTINGS FROM THE DEFAULTS.
|
|
; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
|
|
; YOUR FILE IN THE BUILD PROCESS.
|
|
;
|
|
; THE SETTINGS BELOW ARE THE SETTINGS THAT ARE MOST COMMONLY MODIFIED FOR THIS PLATFORM.
|
|
; MANY OF THEM ARE EQUAL TO THE SETTINGS IN THE INCLUDED FILE, SO THEY DON'T REALLY DO
|
|
; ANYTHING AS IS. THEY ARE LISTED HERE TO MAKE IT EASY FOR YOU TO ADJUST THE MOST COMMON
|
|
; SETTINGS.
|
|
;
|
|
; N.B., SINCE THE SETTINGS BELOW ARE REDEFINING VALUES ALREADY SET IN THE INCLUDED FILE,
|
|
; TASM INSISTS THAT YOU USE THE .SET OPERATOR AND NOT THE .EQU OPERATOR BELOW. ATTEMPTING
|
|
; TO REDEFINE A VALUE WITH .EQU BELOW WILL CAUSE TASM ERRORS!
|
|
;
|
|
; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
|
|
; DIRECTORIES ABOVE THIS ONE).
|
|
;
|
|
#DEFINE BOOT_DEFAULT "H" ; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
|
|
;
|
|
#include "cfg_duo.asm"
|
|
;
|
|
CPUOSC .SET 8000000 ; CPU OSC FREQ IN MHZ
|
|
CRTACT .SET FALSE ; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
|
|
;
|
|
INTMODE .SET 2 ; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
|
|
;
|
|
;;;DMAENABLE .SET TRUE ; DMA: ENABLE DMA DRIVER (DMA.ASM)
|
|
;
|
|
BATCOND .SET TRUE ; ENABLE LOW BATTERY WARNING MESSAGE
|
|
;
|
|
ROMSIZE .SET 512 ; SIZE OF ROM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
RAMSIZE .SET 512 ; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
|
|
;
|
|
PCFENABLE .SET FALSE ; ENABLE PCF8584 I2C CONTROLLER
|
|
;
|
|
MDFFENABLE .SET FALSE ; MD: ENABLE FLASH FILE SYSTEM
|
|
;
|
|
UARTINTS .SET FALSE ; UART: INCLUDE INTERRUPT SUPPORT UNDER IM1/2/3
|
|
;
|
|
CHENABLE .SET TRUE ; CH: ENABLE CH375/376 USB SUPPORT
|
|
ESPENABLE .SET TRUE ; ESP: ENABLE ESP32 IO BOARD DRIVER (ESP.ASM)
|