Fix for ROMless Restart

Registration of terminal emulation was failing under ROMless operation after a (R)estart was performed at the Boot Loader.  See <https://groups.google.com/g/retro-comp/c/bILDMVI97vo/m/Oj8sXdr7DAAJ>.

Source/HBIOS/ansi.asm

@@ -22,6 +22,14 @@ ANSI_DEFCOLOR	.EQU	7	; WHITE ON BLACK
 ;   ANSI EMULATION MODULE
 ;==================================================================================================
 ;
+; PRE-CONSOLE INITIALIZATION
+;
+ANSI_PREINIT:
+	OR	$FF			; RESET THE VDA UNIT
+	LD	(ANSI_VDAUNIT),A	; ... TO INITIAL VALUE
+	XOR	A
+	RET
+;
 ; INITIALIZATION OF EMULATION MODULE CALLED BY PARENT VDA DRIVER
 ; ON ENTRY:
 ;   DE: DISPATCH ADDRESS OF CALLING VDA DRIVER

Source/HBIOS/cvdu.asm

@@ -59,6 +59,7 @@ CVDU_COLS	.EQU	80
 #ENDIF
 ;
 TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
+KBDENABLE	.SET	TRUE		; INCLUDE KBD KEYBOARD SUPPORT
 ;
 ;======================================================================
 ; CVDU DRIVER - INITIALIZATION

Source/HBIOS/gdc.asm

@@ -65,6 +65,7 @@ GDC_COLS	.EQU	80
 	.ECHO	"\n"
 ;
 TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
+KBDENABLE	.SET	TRUE		; INCLUDE KBD KEYBOARD SUPPORT
 ;
 ;======================================================================
 ; GDC DRIVER - INITIALIZATION

Source/HBIOS/hbios.asm

@@ -3257,9 +3257,8 @@ HB_PCINITTBL:
 #IF (TMSENABLE)
 	.DW	TMS_PREINIT
 #ENDIF
-#IF (SCONENABLE)
-	.DW	SCON_PREINIT
-#ENDIF
+	.DW	TERM_PREINIT		; ALWAYS DO THIS ONE
+;
 HB_PCINITTBLLEN	.EQU	(($ - HB_PCINITTBL) / 2)
 
 ;==================================================================================================
@@ -3365,9 +3364,6 @@ HB_INITTBL:
 #IF (TMSENABLE)
 	.DW	TMS_INIT
 #ENDIF
-#IF (SCONENABLE)
-	.DW	SCON_INIT
-#ENDIF
 #IF (EFENABLE)
 	.DW	EF_INIT
 #ENDIF
@@ -3413,6 +3409,9 @@ HB_INITTBL:
 #IF (PPPENABLE)
 	.DW	PPP_INIT
 #ENDIF
+#IF (SCONENABLE)
+	.DW	SCON_INIT
+#ENDIF
 #IF (CHENABLE)
 	.DW	CH_INIT
 #ENDIF
@@ -6461,15 +6460,6 @@ SIZ_TMS	.EQU	$ - ORG_TMS
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
-#IF (SCONENABLE)
-ORG_SCON		.EQU	$
-  #INCLUDE "scon.asm"
-SIZ_SCON	.EQU	$ - ORG_SCON
-		.ECHO	"SCON occupies "
-		.ECHO	SIZ_SCON
-		.ECHO	" bytes.\n"
-#ENDIF
-;
 #IF (EFENABLE)
 ORG_EF		.EQU	$
   #INCLUDE "ef.asm"
@@ -6567,7 +6557,7 @@ SIZ_FONTS	.EQU	$ - ORG_FONTS
 		.ECHO	SIZ_FONTS
 		.ECHO	" bytes.\n"
 ;
-#IF (CVDUENABLE | VGAENABLE | GDCENABLE | VRCENABLE | (TMSENABLE & ((TMSMODE == TMSMODE_MSXKBD) | (TMSMODE == TMSMODE_MBC))))
+#IF (KBDENABLE)
 ORG_KBD		.EQU	$
   #INCLUDE "kbd.asm"
 SIZ_KBD		.EQU	$ - ORG_KBD
@@ -6576,7 +6566,7 @@ SIZ_KBD		.EQU	$ - ORG_KBD
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
-#IF (VDUENABLE | (TMSENABLE & (TMSMODE == TMSMODE_N8)))
+#IF (PPKENABLE)
 ORG_PPK		.EQU	$
   #INCLUDE "ppk.asm"
 SIZ_PPK		.EQU	$ - ORG_PPK
@@ -6612,6 +6602,15 @@ SIZ_PPP		.EQU	$ - ORG_PPP
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
+#IF (SCONENABLE)
+ORG_SCON		.EQU	$
+  #INCLUDE "scon.asm"
+SIZ_SCON	.EQU	$ - ORG_SCON
+		.ECHO	"SCON occupies "
+		.ECHO	SIZ_SCON
+		.ECHO	" bytes.\n"
+#ENDIF
+;
 #IF (CHENABLE)
 ORG_CH		.EQU	$
   #INCLUDE "ch.asm"
@@ -6720,14 +6719,13 @@ SIZ_SYQ		.EQU	$ - ORG_SYQ
 		.ECHO	" bytes.\n"
 #ENDIF
 ;
-#IF (TERMENABLE)
+; TERM IS ALWAYS INCLUDED
 ORG_TERM	.EQU	$
   #INCLUDE "term.asm"
 SIZ_TERM	.EQU	$ - ORG_TERM
 		.ECHO	"TERM occupies "
 		.ECHO	SIZ_TERM
 		.ECHO	" bytes.\n"
-#ENDIF
 ;
 ;#IF (SPKENABLE & DSRTCENABLE)
 #IF (SPKENABLE)
@@ -6799,7 +6797,7 @@ SIZ_YM2612	.EQU	$ - ORG_YM2612
 ;
 ; INCLUDE LZSA2 decompression engine if required.
 ;
-#IF ((VGAENABLE | CVDUENABLE | TMSENABLE | GDCENABLE | VRCENABLE) & USELZSA2)
+#IF ((CVDUENABLE | GDCENABLE | TMSENABLE | VGAENABLE | VRCENABLE) & USELZSA2)
 #INCLUDE "unlzsa2s.asm"
 #ENDIF
 ;

Source/HBIOS/scon.asm

@@ -22,12 +22,6 @@ SCON_ROWS	.EQU	40
 ;
 ;
 ;
-SCON_PREINIT:
-	XOR	A
-	RET
-;
-;
-;
 SCON_INIT:
 	CALL	NEWLINE
 	PRTS("SCON:$")

Source/HBIOS/std.asm

@@ -460,6 +460,12 @@ SER_7372800_8N2	.EQU	SER_BAUD7372800 | SER_DATA8 | SER_PARNONE | SER_STOP2
 ;
 TERMENABLE	.EQU	FALSE		; TERM PSEUDO DEVICE, WILL AUTO-ENABLE IF A VDA IS ENABLED
 ;
+; THE FOLLOWING CONTROL INCLUSION OF THE KEYBOARD DRIVERS.  THEY ARE
+; SET TO TRUE IN THE VDA DRIVERS AS NEEDED.
+;
+KBDENABLE	.EQU	FALSE		; PS/2 KEYBOARD DRIVER
+PPKENABLE	.EQU	FALSE		; PPK KEYBOARD DRIVER
+;
 ; VIDEO MODES
 ;
 V80X24		.EQU	0	; ECB-VDU

Source/HBIOS/term.asm

@@ -16,6 +16,22 @@
 ;
 ;
 ;======================================================================
+; TERMINAL DRIVER - PRE-CONSOLE INITIALIZATION
+;======================================================================
+;
+; GIVE EMULATION MODULES A CHANCE TO RESET THEMSELVES AT STARTUP
+;
+TERM_PREINIT:
+#IF (TERMENABLE)
+	XOR	A			; ZERO TO ACCUM
+	LD	(TERM_DEVCNT),A		; INITIALIZE DEVCNT
+	CALL	TTY_PREINIT		; DO TTY PREINIT
+	CALL	ANSI_PREINIT		; DO ANSI PREINIT
+#ENDIF
+	XOR	A			; SIGNAL SUCCESS
+	RET				; DONE
+;
+;======================================================================
 ; TERMINAL DRIVER - ATTACH
 ;======================================================================
 ;
@@ -31,6 +47,8 @@
 ;   DE: VDA DRIVER'S DISPATCH ADDRESS
 ;   HL: VDA DRIVER'S INSTANCE DATA
 ;
+#IF (TERMENABLE)
+;
 TERM_ATTACH:
 ;
 	LD	A,(TERM_DEVCNT)		; GET NEXT DEVICE NUMBER TO USE
@@ -40,12 +58,12 @@ TERM_ATTACH:
 	; SETUP EMULATOR MODULE FUNC TBL ADDRESS BASED ON DESIRED EMULATION
 	; EMULATOR PASSES BACK IT'S FUNC TBL ADDRESS IN DE
 	OR	$FF			; PRESET FAILURE
-#IF (VDAEMU == EMUTYP_TTY)
+  #IF (VDAEMU == EMUTYP_TTY)
 	CALL	TTY_INIT		; INIT TTY, DE := TTY_FNTBL
-#ENDIF
-#IF (VDAEMU == EMUTYP_ANSI)
+  #ENDIF
+  #IF (VDAEMU == EMUTYP_ANSI)
 	CALL	ANSI_INIT		; INIT ANSI, DE := ANSI_FNTBL
-#ENDIF
+  #ENDIF
 	POP	HL			; RECOVER VDA INSTANCE DATA  PTR
 	RET	NZ			; BAIL OUT ON ERROR
 ;
@@ -74,5 +92,7 @@ TERM_DEVCNT	.DB	0		; TERMINAL DEVICE COUNT
 ; EMULATION MODULES
 ;======================================================================
 ;
-#INCLUDE "tty.asm"
-#INCLUDE "ansi.asm"
+  #INCLUDE "tty.asm"
+  #INCLUDE "ansi.asm"
+;
+#ENDIF

Source/HBIOS/tms.asm

@@ -140,6 +140,14 @@ TMS_COLS	.EQU	40
 ;
 TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
 ;
+#IF (TMSMODE == TMSMODE_N8)
+PPKENABLE	.SET	TRUE		; INCLUDE PPK KEYBOARD SUPPORT
+#ENDIF
+;
+#IF ((TMSMODE == TMSMODE_MSXKBD) | (TMSMODE == TMSMODE_MBC))
+PPKENABLE	.SET	TRUE		; INCLUDE KBD KEYBOARD SUPPORT
+#ENDIF
+;
 ; TMS_IODELAY IS USED TO ADD RECOVERY TIME TO TMS9918/V9958 ACCESSES
 ; IF YOU SEE SCREEN CORRUPTION, ADJUST THIS!!!
 ;

Source/HBIOS/tty.asm

@@ -6,6 +6,14 @@
 ; TODO:
 ;   - SOME FUNCTIONS ARE NOT IMPLEMENTED!!!
 ;
+; PRE-CONSOLE INITIALIZATION
+;
+TTY_PREINIT:
+	OR	$FF			; RESET THE VDA UNIT
+	LD	(TTY_VDAUNIT),A		; ... TO INITIAL VALUE
+	XOR	A
+	RET
+;
 ; INITIALIZATION OF EMULATION MODULE CALLED BY PARENT VDA DRIVER
 ; ON ENTRY:
 ;   C: CIO UNIT NUMBER OF CALLING VDA DRIVER

Source/HBIOS/vdu.asm

@@ -45,6 +45,7 @@ VDU_CSTY	.EQU	VDU_BLOK	; DEFAULT CURSOR STYLE
 VDU_BLNK	.EQU	VDU_NOBL	; DEFAULT BLINK RATE
 ;
 TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
+PPKENABLE	.SET	TRUE		; INCLUDE PPK KEYBOARD SUPPORT
 ;
 #IF (VDUSIZ=V80X24)
 DLINES		.EQU	24

Source/HBIOS/vga.asm

@@ -90,6 +90,7 @@ VGA_R11		.EQU	VGA_SCANL-1
 #DEFINE		DEFREGS		REGS_VGA
 ;
 TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
+KBDENABLE	.SET	TRUE		; INCLUDE KBD KEYBOARD SUPPORT
 ;
 ; DRIVER UTILIZES THE MULTIPLE DISPLAY WINDOW FEATURE OF THE CRTC TO ACCOMPLISH
 ; FULL SCREEN SCROLLING WITHOUT THE NEED TO MOVE DISPLAY RAM BYTES.

Source/HBIOS/vrc.asm

@@ -25,6 +25,7 @@ VRC_COLS	.EQU	64
 #DEFINE	VRC_FONT FONTVGARC
 ;
 TERMENABLE	.SET	TRUE		; INCLUDE TERMINAL PSEUDODEVICE DRIVER
+KBDENABLE	.SET	TRUE		; INCLUDE KBD KEYBOARD SUPPORT
 ;
 		.ECHO	"VRC: IO="
 		.ECHO	VRC_BASE

Source/ver.inc

@@ -2,7 +2,7 @@
 #DEFINE	RMN	5
 #DEFINE	RUP	0
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.5.0-dev.9"
+#DEFINE BIOSVER	"3.5.0-dev.10"
 #define rmj	RMJ
 #define rmn	RMN
 #define rup	RUP

Source/ver.lib

@@ -3,5 +3,5 @@ rmn	equ	5
 rup	equ	0
 rtp	equ	0
 biosver	macro
-	db	"3.5.0-dev.9"
+	db	"3.5.0-dev.10"
 	endm