Add BEL functionality from Michael Schweikert

Added BEL functionality to Propeller-based consoles
Build directory cleanup

Source/Build.cmd

@@ -2,7 +2,7 @@
 setlocal
 
 REM setlocal & call BuildDoc || exit /b 1 & endlocal
-setlocal & call BuildHardware || exit /b 1 & endlocal
+setlocal & call BuildProp || exit /b 1 & endlocal
 setlocal & call BuildImages || exit /b 1 & endlocal
 setlocal & call BuildShared || exit /b 1 & endlocal
 REM setlocal & call BuildBP || exit /b 1 & endlocal

Source/BuildHardware.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-setlocal & cd Hardware && call Build || exit /b 1 & endlocal

Source/BuildProp.cmd

@@ -0,0 +1,4 @@
+@echo off
+setlocal
+
+setlocal & cd Prop && call Build || exit /b 1 & endlocal

Source/Clean.cmd

@@ -7,13 +7,8 @@ setlocal & cd ZCPR && call Clean.cmd & endlocal
 setlocal & cd ZCPR-DJ && call Clean.cmd & endlocal
 setlocal & cd ZSDOS && call Clean.cmd & endlocal
 setlocal & cd CBIOS && call Clean.cmd & endlocal
-
 setlocal & cd BPBIOS && call Clean.cmd & endlocal
-
 setlocal & cd HBIOS && call Clean.cmd & endlocal
-
 setlocal & cd Doc && call Clean.cmd & endlocal
-
 setlocal & cd Images && call Clean & endlocal
-
-setlocal & cd Hardware && call Clean & endlocal
+setlocal & cd Prop && call Clean & endlocal

Source/Hardware/Build.cmd

@@ -1,5 +0,0 @@
-@echo off
-setlocal
-
-setlocal & pushd Prop && call Build & endlocal
-setlocal & pushd VDU && call Build & endlocal

Source/Hardware/Clean.cmd

@@ -1,5 +0,0 @@
-@echo off
-setlocal
-
-setlocal & cd Prop && call Clean & endlocal
-setlocal & cd VDU && call Clean & endlocal

Source/Hardware/ReadMe.txt

@@ -1,12 +0,0 @@
-The Hardware directory contains files that may be needed to complete
-your system setup that would not be appropriate to include in the
-ROM itself or in the ROM disk.
-
-Contents
---------
-
-VDU\vdu.rom: ROM image for VDU onboard EPROM
-
-Prop\PropIO.eeprom: PropIO firmware for use with RomWBW
-Prop\PropIO2.eeprom: PropIO V2 firmware for use with RomWBW
-Prop\ParPortProp.eeprom: ParPortProp firmware for use with RomWBW

Source/Hardware/VDU/Build.cmd

@@ -1,4 +0,0 @@
-@echo off
-setlocal
-
-copy /Y VDU.rom "..\..\..\Binary"

Source/Hardware/VDU/Clean.cmd

@@ -1,2 +0,0 @@
-@echo off
-setlocal

Source/Hardware/Prop/Build.cmd → Source/Prop/Build.cmd

@@ -1,7 +1,7 @@
 @echo off
 setlocal
 
-set TOOLS=../../../Tools
+set TOOLS=../../Tools
 
 set PATH=%TOOLS%\bst;%PATH%
 
@@ -16,5 +16,5 @@ echo.
 echo Building %1...
 bstc Spin\%1 -e -l
 if errorlevel 1 goto :eof
-move /Y %1.eeprom "..\..\..\Binary"
+move /Y %1.eeprom "..\..\Binary"
 goto :eof

Source/Prop/ReadMe.txt

@@ -0,0 +1,12 @@
+The Prop directory contains the files used to build the EEPROM
+firmware images for the Propeller based boards supported by
+RomWBW.
+
+The build process places the resulting ROM image files in the
+Binary directory.  The firmware images are intended to integrate
+with a host CPU board running RomWBW.  The following images are
+created:
+
+PropIO.eeprom for use with original PropIO
+PropIO2.eeprom for use with PropIO V2
+ParPortProp.eeprom for use with Zeta ParPortProp

Source/Hardware/Prop/Spin/AnsiTerm.spin → Source/Prop/Spin/AnsiTerm.spin

@@ -1,6 +1,7 @@
 '' AnsiTerm.spin
 ''
 '' MODIFIED BY WAYNE WARTHEN FOR ANSI COLOR CHARACTER SUPPORT
+'' SPEAKER ENHANCEMENT BY MICHAEL SCHWEIKERT
 ''
 '' based on...
 ''
@@ -12,7 +13,7 @@
 
 CON
   cols          = 80                  	' screen columns
-  rows          = 40                  	' screen rows
+  rows          = 30                  	' screen rows
   chars         = rows * cols         	' screen characters
   termRows      = 25                  	' rows in terminal area
   termChars     = termRows * cols      	' characters in terminal area
@@ -21,9 +22,15 @@ CON
   statRows	= rows - TermRows	' status area rows
   blank         = $20
   
+  spkVol	= 75
+  spkMaxFrq	= 1_200
+  spkMinFrq	= 200
+  spkBase	= 13			' Speaker pin
+
 OBJ
   vga : "vgacolour"
   'vga : "vga8x8d"
+  spk : "E555_SPKEngine"
 
 VAR
   word  screen[chars]           	' screen character buffer
@@ -83,6 +90,17 @@ PUB vidOn
 PUB vidOff
   vga.stop
   
+PUB speakerFrequency(newFrequency)
+  result := spk.speakerFrequency(newFrequency, spkBase)
+
+PUB speakerVolume(newVolume)
+  result := spk.speakerVolume(newVolume, spkBase)
+
+PUB beep
+  spk.speakerFrequency(1000, spkBase)
+  waitcnt((clkfreq >> 4) + cnt)
+  spk.speakerFrequency(-1, spkBase)
+
 PUB cls
   wordfill(@screen, (curAttr | blank), chars)
 
@@ -446,6 +464,10 @@ PUB processChar(c)
        setCursorPos(pos)
       return
 
+     if c == 7				' bel
+       beep
+       return
+
     1:					' Process char following escape
       case c
           "[":

Source/Hardware/Prop/Spin/ParPortProp.spin → Source/Prop/Spin/ParPortProp.spin

@@ -38,17 +38,12 @@ CON
   _CLKMODE = XTAL1 + PLL16X
   _XINFREQ = 5_000_000
 
-  SLEEP = 60 * 5                ' Screen saver timeout in seconds
-  
-  SPK_VOL = 75
-
-  SPK_MAXFRQ = 1_200
-  SPK_MINFRQ = 200
+  'SLEEP = 60 * 5                ' Screen saver timeout in seconds
+  SLEEP = 0			' Zero for no screen saver
   
   VGA_BASE = 16                 ' VGA Video pins 16-23 (??)
   KBD_BASE = 14                 ' PS/2 Keyboard pins 14-15 (DATA, CLK)
   SD_BASE = 24                  ' SD Card pins 24-27 (DO, CLK, DI, CS)
-  SPK_BASE = 13                 ' Speaker pin
 
   STAT_ATTR1 = %00110000_00000000	' Status area screen attribute (first line)
   STAT_ATTR = %01110000_00000000	' Status area screen attribute
@@ -106,7 +101,6 @@ OBJ
   sdc : "safe_spi"                                      ' SD Card Driver
   'dbg : "Parallax Serial Terminal"                      ' Serial Port Driver (debug output)
   dbg : "Parallax Serial Terminal Null"                 ' Do nothing for debug output
-  spk : "E555_SPKEngine"                                ' Speaker Driver
   sio : "FullDuplexSerial"                              ' Serial I/O                                              
   'sio : "FullDuplexSerialNull"                          ' Dummy driver to use when debugging                                              
 
@@ -148,7 +142,6 @@ PUB main | tmp
     dsp.cls
   MsgNewLine
 
-  TimerCount := SLEEP  
   dsp.VidOn
 
   statRows := (dsp.statInfo >> 8)  & $FF
@@ -209,6 +202,7 @@ PUB main | tmp
     MsgStr(string(" OK"))
   MsgNewLine
 
+  if (SLEEP > 0)
     MsgStr(string("Starting Timer..."))
     Result := cognew(Timer, @TimerStack) 
     if (Result < 0)
@@ -227,9 +221,7 @@ PUB main | tmp
     MsgStr(string(" OK"))
   MsgNewLine
 
-  spk.speakerFrequency(1000, SPK_BASE)
-  waitcnt((clkfreq >> 4) + cnt)
-  spk.speakerFrequency(-1, SPK_BASE)
+  dsp.beep
 
   MsgStr(string("ParPortProp Ready!"))
   MsgNewLine
@@ -481,9 +473,9 @@ PRI SpeakerTone | Freq, Duration, tmp
   dbg.Str(String("ms"))
   dbg.NewLine
 
-  spk.speakerFrequency(Freq, SPK_BASE)
+  dsp.speakerFrequency(Freq)
   waitcnt(Duration + cnt)
-  spk.speakerFrequency(-1, SPK_BASE)
+  dsp.speakerFrequency(-1)
 
   return
 
@@ -609,6 +601,7 @@ PRI Timer
       TimerCount--
 
 PRI Activity
+  if (SLEEP > 0)
     if (TimerCount == 0)
       dsp.VidOn
     TimerCount := SLEEP

Source/Hardware/Prop/Spin/PropIO.spin → Source/Prop/Spin/PropIO.spin

@@ -43,7 +43,8 @@ CON
   _CLKMODE = XTAL1 + PLL16X
   _XINFREQ = 5_000_000
   
-  SLEEP = 60 * 5                ' Screen saver timeout in seconds
+  'SLEEP = 60 * 5                ' Screen saver timeout in seconds
+  SLEEP = 0			' Zero for no screen saver
   
   VGA_BASE = 16                 ' VGA Video pins 16-23 (??)
   KBD_BASE = 14                 ' PS/2 Keyboard pins 14-15 (DATA, CLK)
@@ -120,7 +121,6 @@ PUB main
     dsp.cls
   MsgNewLine
 
-  TimerCount := SLEEP  
   dsp.VidOn
 
   statRows := (dsp.statInfo >> 8)  & $FF
@@ -166,6 +166,7 @@ PUB main
     MsgStr(string(" OK"))
   MsgNewLine
 
+  if (SLEEP > 0)
     MsgStr(string("Starting Timer..."))
     Result := cognew(Timer, @TimerStack) 
     if (Result < 0)
@@ -317,6 +318,7 @@ PRI Timer
       TimerCount--
 
 PRI Activity
+  if (SLEEP > 0)
     if (TimerCount == 0)
       dsp.VidOn
     TimerCount := SLEEP

Source/Hardware/Prop/Spin/PropIO2.spin → Source/Prop/Spin/PropIO2.spin

@@ -43,12 +43,12 @@ CON
   _CLKMODE = XTAL1 + PLL16X
   _XINFREQ = 5_000_000
   
-  SLEEP = 60 * 5                ' Screen saver timeout in seconds
+  'SLEEP = 60 * 5                ' Screen saver timeout in seconds
+  SLEEP = 0			' Zero for no screen saver
   
   VGA_BASE = 16                 ' VGA Video pins 16-23 (??)
   KBD_BASE = 14                 ' PS/2 Keyboard pins 14-15 (DATA, CLK)
   SD_BASE = 24                  ' SD Card pins 24-27 (DO, CLK, DI, CS)
-  SPK_BASE = 13                 ' Speaker pin
   
   STAT_ATTR1 = %00110000_00000000	' Status area screen attribute (first line)
   STAT_ATTR = %01110000_00000000	' Status area screen attribute
@@ -77,14 +77,11 @@ CON
 
   TRMST_ACTMASK = (TRMST_KBDACT | TRMST_DSPACT)         ' bit mask for kbd or dsp active
 
-
-
 OBJ
   'dsp : "VGA_1024"                                      ' VGA Terminal Driver
   dsp : "AnsiTerm"                                      ' VGA Terminal Driver
   kbd : "Keyboard"                                      ' PS/2 Keyboard Driver
   sdc : "safe_spi"                                      ' SD Card Driver
-  spk : "E555_SPKEngine"                                ' Speaker Driver
   dbg : "Parallax Serial Terminal Null"                 ' Serial Port Driver (debug output)                                              
 
 VAR
@@ -122,7 +119,6 @@ PUB main
     dsp.cls
   MsgNewLine
 
-  TimerCount := SLEEP  
   dsp.vidOn
 
   statRows := (dsp.statInfo >> 8)  & $FF
@@ -168,6 +164,7 @@ PUB main
     MsgStr(string(" OK"))
   MsgNewLine
 
+  if (SLEEP > 0)
     MsgStr(string("Starting Timer..."))
     Result := cognew(Timer, @TimerStack) 
     if (Result < 0)
@@ -186,9 +183,7 @@ PUB main
     MsgStr(string(" OK"))
   MsgNewLine
   
-  spk.speakerFrequency(1000, SPK_BASE)
-  waitcnt((clkfreq >> 4) + cnt)
-  spk.speakerFrequency(-1, SPK_BASE)
+  dsp.beep
 
   MsgStr(string("PropIO Ready!"))
   MsgNewLine
@@ -323,6 +318,7 @@ PRI Timer
       TimerCount--
 
 PRI Activity
+  if (SLEEP > 0)
     if (TimerCount == 0)
       dsp.vidOn
     TimerCount := SLEEP

Source/ReadMe.txt

@@ -279,12 +279,11 @@ You may notice there are a few additional Build*.cmd files in the
 Source directory.  They are not used or required for building ROM 
 firmware.  Their purpose is described below:
 
-BuildHardware: Some of the RetroBrew Computer support boards
-               require onboard firmware separate from the CPU
-	       board firmware.  For the most part, this is the
-	       Propeller-based boards (ParPortProp and PropIO).
-	       This build script generates the firmware for these
-	       boards.
+BuildProp: Some RetroBrew Computer peripheral boards are based
+           on the Parallax Propeller.  The Propeller requires
+           custom onboard EEPROM firmware to operate.  This
+           command file builds the firmware images for each
+           of the Propeller-based boards.
 
 BuildImages: RomWBW has the ability to create floppy disk and hard
              disk images for use on systems running the RomWBW