Minor Cleanup

Binary/RomList.txt

@@ -163,6 +163,7 @@ RCZ80 (RCZ80_std.rom):
  - Support for Scott Baker SIO board may be enabled in config
  - Support for Scott Baker floppy controllers (SMC & WDC) may
    be enabled in config
+ - Support for J.B. Lang TMS9918 video card may be enabled in config
 
 RCZ80 w/ KIO (RCZ80_kio.rom):
  - Assumes CPU oscillator of 7.3728 MHz
@@ -174,6 +175,7 @@ RCZ80 w/ KIO (RCZ80_kio.rom):
  - Support for Scott Baker SIO board may be enabled in config
  - Support for Scott Baker floppy controllers (SMC & WDC) may
    be enabled in config
+ - Support for J.B. Lang TMS9918 video card may be enabled in config
 
 RCZ180 (RCZ180_nat.rom & RCZ180_ext.rom):
  - Assumes CPU oscillator of 18.432 MHz
@@ -183,6 +185,7 @@ RCZ180 (RCZ180_nat.rom & RCZ180_ext.rom):
  - Support for alternative serial modules may be enabled in config
  - Support for Scott Baker floppy controllers (SMC & WDC) may
    be enabled in config
+ - Support for J.B. Lang TMS9918 video card may be enabled in config
  - You must pick the _nat or _ext variant depending on which
    memory module you are using:
    - RCZ180_nat.rom uses the built-in Z180 memory manager
@@ -199,6 +202,7 @@ SCZ180 (SCZ180_126.rom, SCZ180_130.rom, SCZ180_131.rom):
  - Support for alternative serial modules may be enabled in config
  - Support for Scott Baker floppy controllers (SMC & WDC) may
    be enabled in config
+ - Support for J.B. Lang TMS9918 video card may be enabled in config
  - The 3 different variants of SCZ180 are provided to match the
    3 corresponding systems (SC126, SC130, and SC131) designed by
    Stephen Cousins.

Source/CPM3/biosldr.z80

@@ -9,6 +9,7 @@
 	extrn	cin, cout
 	extrn	crlf, crlf2
 	
+	debug	equ	false
 
 ; BIOS Jump vector.
 
@@ -301,16 +302,44 @@ setsec:
 	ld	(sect),bc
 	ret
 setdma:
-	;push	hl
-	;push	bc
-	;pop	hl
-	;call	crlf
-	;call	phex16
-	;pop	hl
+
+	  if debug
+
+	push	hl
+	push	bc
+	pop	hl
+	call	crlf
+	call	phex16
+	pop	hl
+	
+	  endif
+
 	ld	(dma),bc
 	ret
 
 read:
+	  if debug
+
+	call	crlf
+	ld	a,(unit)
+	call	phex8
+	ld	a,' '
+	call	cout
+	ld	hl,(trk)
+	call	phex16
+	ld	a,' '
+	call	cout
+	ld	hl,(sect)
+	call	phex16
+	ld	a,' '
+	call	cout
+	ld	hl,(lba+2)
+	call	phex16
+	ld	hl,(lba+0)
+	call	phex16
+	
+	  endif
+
 	; Check device type
 	ld	a,(unit)		; get unit
 	ld	c,a			; BIOS Disk Unit in C
@@ -349,6 +378,18 @@ read2:
 	set	7,d			; set lba access bit
 
 read3:
+
+	  if debug
+
+	ld	a,' '
+	call	cout
+	ex	de,hl
+	call	phex16
+	ex	de,hl
+	call	phex16
+	
+	  endif
+
 	; DE:HL has sector address to read (LBA or CHS)
 	ld	a,(unit)		; get disk unit
 	ld	c,a			; put in C

Source/HBIOS/Config/RCZ180_ext.asm

@@ -39,6 +39,8 @@ ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
 FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;

Source/HBIOS/Config/RCZ180_nat.asm

@@ -39,6 +39,8 @@ ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
 FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;

Source/HBIOS/Config/RCZ80_mt.asm

@@ -27,6 +27,9 @@
 #define	PLATFORM_NAME	"RC2014 (MT)"
 ;
 #include "Config/RCZ80_std.asm"
+;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+
 ;
 SDENABLE	.SET	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.SET	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]

Source/HBIOS/Config/RCZ80_std.asm

@@ -32,6 +32,9 @@ UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
 ACIAENABLE	.SET	TRUE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+;
 FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;

Source/HBIOS/Config/SCZ180_126.asm

@@ -41,6 +41,8 @@ ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
 FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 ;

Source/HBIOS/Config/SCZ180_130.asm

@@ -48,6 +48,8 @@ ASCIENABLE	.SET	TRUE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
 ACIAENABLE	.SET	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
 SIOENABLE	.SET	FALSE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
 ;
+TMSENABLE	.SET	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+;
 FDENABLE	.SET	FALSE		; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|DIDE|N8|DIO3]
 ;

Source/HBIOS/cfg_dyno.asm

@@ -90,7 +90,7 @@ VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)

Source/HBIOS/cfg_ezz80.asm

@@ -115,7 +115,7 @@ VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)

Source/HBIOS/cfg_master.asm

@@ -152,7 +152,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_NONE	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 ;

Source/HBIOS/cfg_mk4.asm

@@ -107,7 +107,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 ;

Source/HBIOS/cfg_n8.asm

@@ -110,7 +110,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_N8	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 ;

Source/HBIOS/cfg_rcz180.asm

@@ -119,7 +119,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_RC	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)

Source/HBIOS/cfg_rcz80.asm

@@ -125,7 +125,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_RC	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
@@ -177,7 +177,7 @@ PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
 PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
-SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE

Source/HBIOS/cfg_sbc.asm

@@ -111,7 +111,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
 ;

Source/HBIOS/cfg_scz180.asm

@@ -114,7 +114,7 @@ CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
 TMSMODE		.EQU	TMSMODE_RC	; TMS: DRIVER MODE: TMSMODE_[SCG/N8]
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)

Source/HBIOS/cfg_zeta.asm

@@ -88,7 +88,7 @@ VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)

Source/HBIOS/cfg_zeta2.asm

@@ -98,7 +98,7 @@ VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
 CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
 NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
 TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
-TMSTIMENABLE	.EQU	FALSE		; TMS: INTERRUPTS NOT ENABLED
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
 VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
 ;
 MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)