Update Documentation Files

Updated ReadMe files to reflect addition of RC2014 platform.

Binary/RomList.txt

@@ -30,6 +30,7 @@ image to use for each platform:
 	Zeta V2		ZETA2_std.rom
 	N8		N8_std.rom
 	Mark IV		MK4_std.rom
+	RC2014		RC_std.rom
 
 You will find there is one additional ROM image called 
 "UNA_std.rom". This ROM image is an UNA-based RomWBW ROM image.  As 
@@ -48,7 +49,7 @@ the UNA FAT loader for testing.
 All of the standard ROM Images are configured with:
  - 512KB ROM Disk
  - 512KB RAM Disk
- - 38.4Kbps baud serial console
+ - 38.4Kbps baud serial console (RC2014 is determined by hardware)
  - Auto-discovery of all serial ports
 
 All hard disk type devices (IDE, PPIDE, CF Card, SD Card) will be 
@@ -109,3 +110,9 @@ MK4:
  - Includes support for CVDU and VGA3 boards.  If detected at
    startup, support for video and keyboard is installed
    including VT-100/ANSI terminal emulation.
+
+RC2014:
+ - Requires Scott Baker's 512K RAM/ROM module
+ - Auto detects Serial I/O Module (ACIA) and Dual Serial
+   Module (SIO/2).  Either one may be used.
+ - Includes support for Compact Flash Module

ReadMe.txt

@@ -7,14 +7,14 @@
 ***********************************************************************
 
 Wayne Warthen (wwarthen@gmail.com)
-Version 2.8.5, 2017-10-09
+Version 2.8.6, 2017-10-09
 https://www.retrobrewcomputers.org/
 
 RomWBW is a ROM-based implementation of CP/M-80 2.2 and Z-System for 
 all RetroBrew Computers Z80/Z180 hardware platforms including SBC 
-1/2, Zeta 1/2, N8, and Mark IV. Virtually all RetroBrew hardware is 
-supported including floppy, hard disk (IDE, CF Card, SD Card), Video, 
-and keyboard. VT-100 terminal emulation is built-in.
+1/2, Zeta 1/2, N8, Mark IV, and RC2014. Virtually all RetroBrew 
+hardware is supported including floppy, hard disk (IDE, CF Card, SD 
+Card), Video, and keyboard. VT-100 terminal emulation is built-in.
 
 The RomWBW ROM loads and runs the built-in operating systems directly
 from the ROM and includes a selection of standard/useful applications
@@ -47,7 +47,8 @@ Connect a serial terminal or computer with terminal emulation
 software to the primary RS-232 port of your CPU board.  A null-modem 
 connection is generally required.  Set the line characteristics to 
 38400 baud, 8 data bits, 1 stop bit, no parity, and no flow control. 
-Select VT-100 terminal emulation.
+Select VT-100 terminal emulation.  In the case of the RC2014, the
+baud rate is determined by hardware, but is normally 115200 baud.
 
 Upon power-up, your terminal should display a sign-on banner within 2 
 seconds followed by hardware inventory and discovery information.  
@@ -65,12 +66,6 @@ aware of.
 The use of high density floppy disks requires a CPU speed of 8 MHz or
 greater.
 
-The latest X-Modem file transfer programs (XM.COM, XM-A0.COM, and
-XM-A1.COM) require a CPU speeed of 6 MHz or greater to support the
-default RomWBW serial port speed of 38400 baud. Older variants of
-the X-Modem programs are included (XM5.COM, XM5-A0, and XM5-A1) which
-will handle 38400 baud on system running down to 4 MHz.
-
 Upgrading from Previous Versions
 --------------------------------
 
@@ -117,8 +112,8 @@ ROM version:
     - OSLDR.COM
     - SYSCOPY.COM
     - TALK.COM
-    - FD.COM
-    - XM*.COM
+    - FDU.COM
+    - XM.COM
 
 UNA Hardware BIOS
 -----------------

Source/ReadMe.txt

@@ -94,6 +94,7 @@ to determine the <plt> component of the configuration filename:
 	Zeta V2		ZETA2_std.rom
 	N8		N8_std.rom
 	Mark IV		MK4_std.rom
+	RC2014		RC_std.rom
 
 You can use any name you choose for the <cfg> component of the 
 configuration filename.  So, let's say you want to create a custom