Merge pull request #187 from wwarthen/dev

Dev
2026-02-06 22:43:15 -06:00 · 2021-07-10 09:21:45 +08:00
parent 1726744650 e79770dcea
commit 830100cd84
45 changed files with 4259 additions and 138 deletions
--- a/Source/Apps/FAT/fat.com
+++ b/Source/Apps/FAT/fat.com
--- a/Source/Apps/FDU/fdu.asm
+++ b/Source/Apps/FDU/fdu.asm
--- a/Source/Apps/FDU/fdu.txt
+++ b/Source/Apps/FDU/fdu.txt
--- a/Source/Apps/MBC/button2.asm
+++ b/Source/Apps/MBC/button2.asm
@@ -0,0 +1,19 @@
+; test program for user button on Z80 MBC clock board
+; by Andrew Lynch, 6 Jul 2021
+
+
+  ORG    00100H
+
+MAIN_LOOP:
+
+	IN	A,($70)		    ; READ USER BUTTON STATUS
+	AND	%01000000	    ; REMOVE ALL EXCEPT USER BUTTON (D6)
+	    			    ; 0=PRESSED, 1=NOT PRESSED
+	JR	NZ,MAIN_LOOP	; IF NOT PRESSED TRY AGAIN
+
+	LD	A,%00000011	    ; TURN ON BOTH USER LEDS
+	OUT	($70),A		    ;
+
+    RET
+    
+    end
--- a/Source/Apps/MBC/leds2.asm
+++ b/Source/Apps/MBC/leds2.asm
@@ -0,0 +1,8 @@
+; program to test user LEDs on Z80 MBC clock board
+; by Andrew Lynch, 6 Jul 2021
+
+  org $0100
+	LD	A,%00000011
+    OUT	($70),A	; turn on USERLED0 and USERLED1
+    RET
+	end
--- a/Source/Apps/MBC/tone3.asm
+++ b/Source/Apps/MBC/tone3.asm
@@ -0,0 +1,35 @@
+; program to test user buzzer/speaker on Z80 MBC clock board
+; by Andrew Lynch, 6 Jul 2021
+
+	org $0100
+
+	LD	HL,$7FFF	; INITIALIZE OUTER LOOP
+	LD	DE,$0001	; DECREMENT VALUE
+
+START:
+
+	LD	A,%00000100
+	OUT	($70),A		; TURN ON SPEAKER
+
+	LD	B,$80		; HOLD SPEAKER ON FOR 128 COUNTS
+LOOP1:	DJNZ	LOOP1
+
+	LD	A,%00000000
+	OUT	($70),A		; TURN OFF SPEAKER
+
+	LD	B,$80		; HOLD SPEAKER OFF FOR 128 COUNTS
+LOOP2:	DJNZ	LOOP2
+
+	SBC	HL,DE		; REDUCE OUTER LOOP BY 1
+
+	JR	NZ,START	; LOOP 32768 TIMES, ABOUT 15 SECONDS
+
+	LD	A,%00000011
+	OUT	($70),A		; TURN ON BOTH USER LEDS
+
+;	HALT			; HALT & TURN ON HALT LED
+
+    RET
+
+	end
+
--- a/Source/Apps/Makefile
+++ b/Source/Apps/Makefile
@@ -1,6 +1,6 @@
-OBJECTS = SysGen.com Survey.com \
-	SysCopy.com Assign.com Format.com Talk.com Mode.com RTC.com \
-	Timer.com IntTest.com RTCds7.com RTChb.com
+OBJECTS = sysgen.com survey.com \
+	syscopy.com assign.com format.com talk.com mode.com rtc.com \
+	timer.com inttest.com rtcds7.com rtchb.com ppidetst.com tstdskng.com
 OTHERS = *.hex *.com
 SUBDIRS = XM FDU FAT Tune I2C
 DEST = ../../Binary/Apps
@@ -10,5 +10,5 @@ include $(TOOLS)/Makefile.inc

 USETASM = 1

-Survey.com: USETASM=0
+survey.com: USETASM=0

--- a/Source/Apps/Tune/Build.cmd
+++ b/Source/Apps/Tune/Build.cmd
@@ -5,11 +5,11 @@ set TOOLS=../../../Tools
 set PATH=%TOOLS%\tasm32;%PATH%
 set TASMTABS=%TOOLS%\tasm32

-tasm -t180 -g3 -fFF -dWBW Tune.asm Tune.com Tune.lst
-tasm -t180 -g3 -fFF -dZX Tune.asm Tunezx.com Tunezx.lst
-tasm -t180 -g3 -fFF -dMSX Tune.asm Tunemsx.com Tunemsx.lst
+tasm -t180 -g3 -fFF -dWBW tune.asm tune.com tune.lst
+tasm -t180 -g3 -fFF -dZX tune.asm tunezx.com tunezx.lst
+tasm -t180 -g3 -fFF -dMSX tune.asm tunemsx.com tunemsx.lst

 if errorlevel 1 goto :eof

-copy /Y Tune*.com ..\..\..\Binary\Apps\
+copy /Y tune*.com ..\..\..\Binary\Apps\
 copy /Y Tunes\*.* ..\..\..\Binary\Apps\Tunes\
--- a/Source/Apps/Tune/tune.asm
+++ b/Source/Apps/Tune/tune.asm
--- a/Source/Apps/assign.asm
+++ b/Source/Apps/assign.asm
--- a/Source/Apps/ppidetst.asm
+++ b/Source/Apps/ppidetst.asm
--- a/Source/Apps/rtcds7.asm
+++ b/Source/Apps/rtcds7.asm
@@ -0,0 +1,703 @@
+;==================================================================================================
+; PCF8584 I2C Clock Driver
+;==================================================================================================
+;
+PCF_BASE  	.EQU  0F0H
+PCF_ID   	.EQU  0AAH
+CPU_CLK	  	.EQU  12
+
+REGS0     	.EQU  PCF_BASE
+REGS1    	.EQU  REGS0+1
+PCF_OWN	 	.EQU  (PCF_ID >> 1)        	; PCF'S ADDRESS IN SLAVE MODE
+;
+;T4LC512D	.EQU	10100000B		; DEVICE IDENTIFIER
+;T4LC512A1	.EQU	00000000B		; DEVICE ADDRESS
+;T4LC512A2	.EQU	00001110B		; DEVICE ADDRESS
+;T4LC512A3	.EQU	00000010B		; DEVICE ADDRESS
+;T4LC512W	.EQU	00000000B		; DEVICE WRITE
+;T4LC512R	.EQU	00000001B		; DEVICE READ
+;
+;I2CDEV1W  	.EQU	(T4LC512D+T4LC512A1+T4LC512W)
+;I2CDEV1R	.EQU	(T4LC512D+T4LC512A1+T4LC512R)
+;
+;I2CDEV2W  	.EQU	(T4LC512D+T4LC512A2+T4LC512W)
+;I2CDEV2R	.EQU	(T4LC512D+T4LC512A2+T4LC512R)
+;
+;I2CDEV3W  	.EQU	(T4LC512D+T4LC512A3+T4LC512W)
+;I2CDEV3R	.EQU	(T4LC512D+T4LC512A3+T4LC512R)
+;
+; CONTROL REGISTER BITS
+;
+PCF_PIN  	.EQU  10000000B
+PCF_ES0  	.EQU  01000000B
+PCF_ES1  	.EQU  00100000B
+PCF_ES2  	.EQU  00010000B
+PCF_EN1  	.EQU  00001000B
+PCF_STA  	.EQU  00000100B
+PCF_STO  	.EQU  00000010B
+PCF_ACK  	.EQU  00000001B
+;
+PCF_START_    	.EQU  (PCF_PIN | PCF_ES0 | PCF_STA | PCF_ACK)
+PCF_STOP_     	.EQU  (PCF_PIN | PCF_ES0 | PCF_STO | PCF_ACK)
+PCF_REPSTART_ 	.EQU  (          PCF_ES0 | PCF_STA | PCF_ACK)
+PCF_IDLE_     	.EQU  (PCF_PIN | PCF_ES0           | PCF_ACK)
+;
+; STATUS REGISTER BITS
+;
+;PCF_PIN  	.EQU  10000000B
+PCF_INI   	.EQU  01000000B   ; 1 if not initialized 
+PCF_STS   	.EQU  00100000B
+PCF_BER   	.EQU  00010000B
+PCF_AD0   	.EQU  00001000B
+PCF_LRB   	.EQU  00001000B
+PCF_AAS   	.EQU  00000100B
+PCF_LAB   	.EQU  00000010B
+PCF_BB    	.EQU  00000001B
+;
+; CLOCK CHIP FREQUENCIES
+;
+PCF_CLK3   	.EQU	000H
+PCF_CLK443 	.EQU	010H
+PCF_CLK6   	.EQU	014H
+PCF_CLK8   	.EQU	018H
+PCF_CLK12  	.EQU	01cH
+;
+; TRANSMISSION FREQUENCIES
+;
+PCF_TRNS90 	.EQU	000H	;  90 kHz */
+PCF_TRNS45 	.EQU	001H	;  45 kHz */
+PCF_TRNS11 	.EQU	002H	;  11 kHz */
+PCF_TRNS15 	.EQU	003H	; 1.5 kHz */
+;
+; TIMEOUT AND DELAY VALUES (ARBITRARY)
+;
+PCF_PINTO	.EQU	65000
+PCF_ACKTO	.EQU	65000
+PCF_BBTO	.EQU	65000
+PCF_LABDLY	.EQU	65000
+;
+; DATA PORT REGISTERS
+;
+#IF (CPU_CLK = 443)
+PCF_CLK .EQU PCF_CLK443
+#ELSE 
+ #IF (CPU_CLK = 8)
+PCF_CLK .EQU PCF_CLK8
+ #ELSE 
+  #IF (CPU_CLK = 12)
+PCF_CLK .EQU PCF_CLK12
+  #ELSE ***ERROR
+  #ENDIF
+ #ENDIF	
+#ENDIF
+;
+DS7_OUT		.EQU	10000000B		; SELECT SQUARE WAVE FUNCTION
+DS7_SQWE	.EQU	00010000B		; ENABLE SQUARE WAVE OUTPUT
+DS7_RATE	.EQU	00000000B		; SET 1HZ OUPUT
+;
+DS7_DS1307    	.EQU  	11010000B   		; DEVICE IDENTIFIER
+DS7_W   	.EQU  	00000000B   		; DEVICE WRITE
+DS7_R   	.EQU  	00000001B   		; DEVICE READ
+;
+DS7_READ   	.EQU    (DS7_DS1307 | DS7_R)	; READ
+DS7_WRITE 	.EQU    (DS7_DS1307 | DS7_W)	; WRITE
+;
+DS7_CTL		.EQU	(DS7_OUT | DS7_SQWE | DS7_RATE)
+;
+        .ORG  100H
+;
+;
+        CALL   DS7_RDC         ; READ CLOCK DATA INTO BUFFER  
+        CALL   DS7_DISP        ; DISPLAY TIME AND DATE FROM BUFFER 
+	RET
+;
+;-----------------------------------------------------------------------------
+; RTC READ
+;
+; 1.	ISSUE SLAVE ADDRESS WITH START CONDITION AND WRITE STATUS
+; 2.	OUTPUT THE ADDRESS TO ACCESS. (00H = START OF DS1307 REGISTERS)
+; 3.	OUTPUT REPEAT START TO TRANSITION TO READ PROCESS
+; 4.	ISSUE SLAVE ADDRESS WITH READ STATUS
+; 5. 	DO A DUMMY READ 
+; 6.	READ 8 BYTES STARTING AT ADDRESS PREVIOUSLY SET
+; 7.	END READ WITH NON-ACKNOWLEDGE
+; 8.	ISSUE STOP AND RELEASE BUS 
+;
+DS7_RDC:LD	A,DS7_WRITE	; SET SLAVE ADDRESS
+        OUT	(REGS0),A
+;
+	CALL	PCF_WAIT_FOR_BB
+	JP	NZ,PCF_BBERR
+;
+        CALL	PCF_START	; GENERATE START CONDITION
+	CALL	PCF_WAIT_FOR_PIN; AND ISSUE THE SLAVE ADDRESS
+	CALL	NZ,PCF_PINERR
+;
+        LD     	A,0
+        OUT    	(REGS0),A    	; PUT ADDRESS MSB ON BUS
+	CALL	PCF_WAIT_FOR_PIN
+	CALL	NZ,PCF_PINERR
+;
+	CALL	PCF_REPSTART    ; REPEAT START
+;
+        LD	A,DS7_READ	; ISSUE CONTROL BYTE + READ
+        OUT	(REGS0),A
+;
+	CALL	PCF_READI2C	; DUMMY READ
+;
+	LD	HL,DS7_BUF	; READ 8 BYTES INTO BUFFER
+	LD	B,8
+DS7_RL1:CALL	PCF_READI2C
+	LD	(HL),A
+	INC	HL
+	DJNZ    DS7_RL1
+;
+#IF (0)
+	LD	A,8
+	LD	DE,DS7_BUF	; DISLAY DATA READ
+	CALL	PRTHEXBUF	; 
+	CALL   	NEWLINE
+#ENDIF
+;
+	LD     	A,PCF_ES0	; END WITH NOT-ACKNOWLEDGE
+	OUT    	(REGS1),A       ; AND RELEASE BUS
+	NOP
+	IN    	A,(REGS0)
+	NOP
+DS7_WTPIN:	
+	IN	A,(REGS1)	; READ S1 REGISTER
+	BIT	7,A		; CHECK PIN STATUS
+	JP	NZ,DS7_WTPIN
+	CALL   	PCF_STOP
+;
+	IN    	A,(REGS0)
+        RET
+
+;
+;-----------------------------------------------------------------------------
+; DISPLAY CLOCK INFORMATION FROM DATA STORED IN BUFFER
+;
+DS7_DISP:
+	LD	HL,DS7_CLKTBL
+DS7_CLP:LD	C,(HL)
+	INC	HL
+	LD	D,(HL)
+	CALL	DS7_BCD
+	INC	HL
+	LD	A,(HL)
+	OR      A
+	RET	Z
+        CALL	COUT
+	INC	HL
+	JR	DS7_CLP
+	RET
+;
+DS7_CLKTBL:
+	.DB	04H, 00111111B, '/'
+	.DB	05H, 00011111B, '/'
+	.DB	06H, 11111111B, ' '
+	.DB	02H, 00011111B, ':'
+	.DB	01H, 01111111B, ':'
+	.DB	00H, 01111111B, 00H
+;
+DS7_BCD:PUSH	HL
+	LD      HL,DS7_BUF     	; READ VALUE FROM
+	LD      B,0           	; BUFFER, INDEXED BY A 
+	ADD     HL,BC
+	LD      A,(HL)
+	AND     D             	; MASK OFF UNNEEDED
+	SRL     A
+	SRL     A
+	SRL     A
+	SRL     A      
+	ADD     A,30H
+	CALL    COUT
+	LD      A,(HL)    
+	AND     00001111B
+	ADD     A,30H
+	CALL    COUT
+	POP	HL
+	RET
+;
+DS7_BUF:	.FILL	8,0	; BUFFER FOR TIME, DATE AND CONTROL
+
+;-----------------------------------------------------------------------------
+PCF_START:
+        LD     A,PCF_START_  
+	OUT    (REGS1),A
+	RET
+;
+;-----------------------------------------------------------------------------
+PCF_REPSTART:
+        LD     A,PCF_REPSTART_  
+	OUT    (REGS1),A
+	RET
+;
+;-----------------------------------------------------------------------------
+PCF_STOP:   
+	LD   	A,PCF_STOP_
+        OUT  	(REGS1),A
+        RET
+;
+;-----------------------------------------------------------------------------
+;;
+PCF_INIT:
+       LD       A,PCF_PIN   	; S1=80H: S0 SELECTED, SERIAL 
+       OUT     (REGS1),A    	; INTERFACE OFF
+       NOP
+       IN      A,(REGS1)    	; CHECK TO SEE S1 NOW USED AS R/W
+       AND     07FH         	; CTRL. PCF8584 DOES THAT WHEN ESO
+       JP      NZ,PCF_INIERR    ; IS ZERO
+;
+       LD      A,PCF_OWN    	; LOAD OWN ADDRESS IN S0,     
+       OUT     (REGS0),A    	; EFFECTIVE ADDRESS IS (OWN <<1)
+       NOP
+       IN      A,(REGS0)    	; CHECK IT IS REALLY WRITTEN
+       CP      PCF_OWN
+       JP      NZ,PCF_SETERR
+;
+       LD      A,+(PCF_PIN | PCF_ES1) ; S1=0A0H
+       OUT     (REGS1),A              ; NEXT BYTE IN S2
+       NOP
+       IN      A,(REGS1)
+       AND     07FH
+       CP      PCF_ES1
+       JP      NZ,PCF_REGERR
+;
+       LD      A,PCF_CLK    	; LOAD CLOCK REGISTER S2
+       OUT     (REGS0),A
+       NOP
+       IN      A,(REGS0)    	; CHECK IT'S REALLY WRITTEN, ONLY
+       AND     1FH          	; THE LOWER 5 BITS MATTER
+       CP      PCF_CLK
+       JP      NZ,PCF_CLKERR
+;
+       LD      A,PCF_IDLE_
+       OUT     (REGS1),A  
+       NOP
+       IN      A,(REGS1)  
+       CP      +(PCF_PIN | PCF_BB)
+       JP      NZ,PCF_IDLERR
+;
+       RET
+;
+;-----------------------------------------------------------------------------
+PCF_HANDLE_LAB:
+;
+        LD     A,PCF_PIN  
+	OUT    (REGS1),A        
+        LD     A,PCF_ES0  
+	OUT    (REGS1),A
+;
+        LD     HL,PCF_LABDLY
+PCF_LABLP:
+	LD     A,H
+        OR     L
+        DEC    HL  
+        JR     NZ,PCF_LABLP
+;
+        IN     A,(REGS1)
+        RET
+;
+;-----------------------------------------------------------------------------
+;
+; RETURN A=00/Z  IF SUCCESSFULL
+; RETURN A=FF/NZ IF TIMEOUT
+; RETURN A=01/NZ IF LOST ARBITRATION
+; PCF_STATUS HOLDS LAST PCF STATUS
+;
+PCF_WAIT_FOR_PIN:
+	PUSH	HL
+        LD      HL,PCF_PINTO					; SET TIMEOUT VALUE
+
+PCF_WFP0: 
+	IN      A,(REGS1)					; GET BUS
+	LD	(PCF_STATUS),A					; STATUS
+	LD	B,A
+
+	DEC	HL						; HAVE WE
+	LD	A,H						; TIMED OUT
+	OR	L
+	JR	Z,PCF_WFP1					; YES WE HAVE, GO ACTION IT
+
+	LD	A,B						; 		
+        AND     PCF_PIN						; IS TRANSMISSION COMPLETE?
+        JR	NZ,PCF_WFP0					; KEEP ASKING IF NOT OR
+	POP	HL						; YES COMPLETE (PIN=0) RETURN WITH ZERO
+	RET
+PCF_WFP1:
+	LD	A,B						; DID WE LOSE ARBITRATION?
+	AND	PCF_LAB						; IF A=0 THEN NO
+	CPL	
+	JR	NZ,PCF_WFP2					; NO 
+	CALL	PCF_HANDLE_LAB					; YES GO HANDLE IT
+	LD	(PCF_STATUS),A
+	XOR	A						; RETURN NZ, A=01H
+	INC	A
+PCF_WFP2:
+	POP	HL                				; RET NZ, A=FF IF TIMEOUT 
+	RET
+;
+PCF_STATUS	.DB	00H
+
+;--------------------------------------------------------------------------------
+;
+; RETURN NZ/FF IF TIMEOUT ERROR
+; RETURN NZ/01 IF FAILED TO RECEIVE ACKNOWLEDGE
+; RETURN Z/00  IF RECEIVED ACKNOWLEDGE
+;
+PCF_WAIT_FOR_ACK:
+	PUSH	HL
+	LD	HL,PCF_ACKTO
+;
+PCF_WFA0:
+	IN      A,(REGS1)	; READ PIN
+        LD	(PCF_STATUS),A	; STATUS
+        LD	B,A
+;        
+        DEC	HL		; SEE IF WE HAVE TIMED
+        LD	A,H		; OUT WAITING FOR PIN
+        OR	L		; EXIT IF
+        JR	Z,PCF_WFA1	; WE HAVE
+;        
+        LD	A,B		; OTHERWISE KEEP LOOPING
+        AND     PCF_PIN		; UNTIL WE GET PIN
+        JR	NZ,PCF_WFA0	; OR TIMEOUT
+;
+	LD	A,B		; WE GOT PIN SO NOW
+	AND	PCF_LRB		; CHECK WE HAVE
+	LD	A,1
+	JR	Z,PCF_WFA2	; RECEIVED ACKNOWLEDGE
+	XOR	A
+	JR	PCF_WFA2
+PCF_WFA1:
+	CPL			; TIMOUT ERROR
+PCF_WFA2:
+	POP	HL		; EXIT WITH NZ = FF
+	RET
+;	
+;--------------------------------------------------------------------------------
+;
+;	HL POINTS TO DATA
+;	DE = COUNT
+;	A = 0 LAST A=1 NOT LAST
+;
+;
+;PCF_READBYTES:			; NOT FUNCTIONAL YET
+
+	LD	(PCF_LBF),A	; SAVE LAST BYTE FLAG
+;
+	INC	DE		; INCREMENT NUMBER OF BYTES TO READ BY ONE -- DUMMY READ BYTE
+	LD	BC,0		; SET BYTE COUNTER
+;
+PCF_RBL:PUSH	BC
+	CALL	PCF_WAIT_FOR_PIN	; DO WE HAVE THE BUS?
+	POP	BC
+	JR	Z,PCF_RB1	; YES
+	CP	01H
+	JR	Z,PCF_RB3	; NO - LOST ARBITRATION
+	JR	PCF_RB2		; NO - TIMEOUT
+;
+PCF_RB1:
+	LD	A,(PCF_STATUS)
+	AND	PCF_LRB
+
+
+	; IS THIS THE SECOND TO LAST BYTE TO GO?
+
+	PUSH	DE		; SAVE COUNT	
+	DEC	DE		; COUNT (DE) = NUMBER OF BYTES TO READ LESS 1
+	EX	DE,HL		; SAVE POINTER, PUT COUNT IN DE
+	XOR	A		; CLEAR CARRY FLAG
+	SBC	HL,BC		; DOES BYTE COUNTER = HL (NUMBER OF BYTES TO READ LESS 1)
+	EX	DE,HL		; RESTORE POINTER
+	POP	DE		; RESTORE COUNT
+
+				; Z = YES IT IS
+				; NZ = NO IT ISN'T
+	JR	NZ,PCF_RB4
+;
+PCF_RB4:LD	A,B		; IF FIRST READ DO A DUMMY 
+	OR	C		; READ OTHERWISE READ AND SAVE
+	JR	NZ,PCF_RB5
+
+	IN	A,(REGS0)	; DUMMY READ
+	JR	PCF_RB6
+
+PCF_RB5:IN	A,(REGS0)	; READ AND SAVE
+	LD	(HL),A
+;
+PCF_RB6:	; HAVE WE DONE ALL?
+
+	PUSH	DE		; SAVE COUNT
+	EX	DE,HL		; SAVE POINTER, PUT COUNT IN DE
+	XOR	A		; CLEAR CARRY FLAG
+	SBC	HL,BC		; DOES BYTE COUNTER = HL (NUMBER OF BYTES TO READ)
+	EX	DE,HL		; RESTORE POINTER
+	POP	DE		; RESTORE COUNT
+;
+	INC	HL		; BUFFER POINTER
+	INC	BC		; COUNT
+;
+	JR	NZ,PCF_RBL	; REPEAT UNTIL COUNTS MATCH
+	RET
+;
+PCF_RB2:			; TIMEOUT
+	CALL	PCF_STOP
+	CALL	PCF_TOERR
+	RET
+;
+PCF_RB3:			; LOST ARBITRATION
+	CALL	PCF_ARBERR
+	RET
+;
+PCF_LBF:
+	.DB	0		; LAST BYTE FLAG
+;
+;-----------------------------------------------------------------------------
+; READ ONE BYTE FROM I2C
+; RETURNS DATA IN A
+; Z FLAG SET IS ACKNOWLEDGE RECEIVED (CORRECT OPERATION)
+;
+PCF_READI2C:
+	IN	A,(REGS1)	; READ S1 REGISTER
+	BIT	7,A		; CHECK PIN STATUS
+	JP	NZ,PCF_READI2C
+	BIT	3,A		; CHECK LRB=0
+	JP	NZ,PCF_RDERR
+	IN	A,(REGS0)	; GET DATA
+	RET
+;-----------------------------------------------------------------------------
+;
+; POLL THE BUS BUSY BIT TO DETERMINE IF BUS IS FREE.
+; RETURN WITH A=00H/Z STATUS IF BUS IS FREE
+; RETURN WITH A=FFH/NZ STATUS IF BUS
+;
+; AFTER RESET THE BUS BUSY BIT WILL BE SET TO 1 I.E. NOT BUSY
+;
+PCF_WAIT_FOR_BB:
+        LD     HL,PCF_BBTO
+PCF_WFBB0:
+	IN     A,(REGS1)
+        AND    PCF_BB
+        RET    Z		; BUS IS FREE RETURN ZERO
+        DEC    HL
+        LD     A,H
+        OR     L
+        JR     NZ,PCF_WFBB0	; REPEAT IF NOT TIMED OUT
+        CPL                	; RET NZ IF TIMEOUT  
+	RET 
+;
+;-----------------------------------------------------------------------------
+; DISPLAY ERROR MESSAGES
+;
+PCF_RDERR:
+	PUSH	HL
+	LD	HL,PCF_RDFAIL
+	JR	PCF_PRTERR
+;
+PCF_INIERR:
+	PUSH	HL
+	LD      HL,PCF_NOPCF
+	JR	PCF_PRTERR
+;	
+PCF_SETERR:
+	PUSH	HL
+	LD      HL,PCF_WRTFAIL
+	JR	PCF_PRTERR
+;
+PCF_REGERR:
+	PUSH	HL
+	LD      HL,PCF_REGFAIL
+	JR	PCF_PRTERR
+;	
+PCF_CLKERR:
+	PUSH	HL
+	LD      HL,PCF_CLKFAIL
+	JR	PCF_PRTERR
+;	
+PCF_IDLERR:
+	PUSH	HL
+	LD      HL,PCF_IDLFAIL
+	JR	PCF_PRTERR 
+;	
+PCF_ACKERR:
+	PUSH	HL
+	LD      HL,PCF_ACKFAIL
+	JR	PCF_PRTERR
+;
+PCF_RDBERR:
+	PUSH	HL
+	LD	HL,PCF_RDBFAIL
+	JR	PCF_PRTERR
+;
+PCF_TOERR:
+	PUSH	HL
+	LD	HL,PCF_TOFAIL
+	JR	PCF_PRTERR
+;
+PCF_ARBERR:
+	PUSH	HL
+	LD	HL,PCF_ARBFAIL
+	JR	PCF_PRTERR
+;
+PCF_PINERR:
+	PUSH	HL
+	LD	HL,PCF_PINFAIL
+	JR	PCF_PRTERR
+;
+PCF_BBERR:
+	PUSH	HL
+	LD	HL,PCF_BBFAIL
+	JR	PCF_PRTERR
+;
+PCF_PRTERR:
+	CALL	PRTSTR
+	CALL	NEWLINE
+	POP	HL	
+	RET
+;
+PCF_NOPCF	.DB	"NO DEVICE FOUND$"
+PCF_WRTFAIL	.DB     "SETTING DEVICE ID FAILED$"
+PCF_REGFAIL 	.DB     "CLOCK REGISTER SELECT ERROR$"
+PCF_CLKFAIL 	.DB     "CLOCK SET FAIL$"
+PCF_IDLFAIL 	.DB     "BUS IDLE FAILED$"
+PCF_ACKFAIL 	.DB	"FAILED TO RECEIVE ACKNOWLEDGE$"
+PCF_RDFAIL	.DB	"READ FAILED$"
+PCF_RDBFAIL	.DB	"READBYTES FAILED$"
+PCF_TOFAIL	.DB	"TIMEOUT ERROR$"
+PCF_ARBFAIL 	.DB	"LOST ARBITRATION$"
+PCF_PINFAIL 	.DB	"PIN FAIL$"
+PCF_BBFAIL	.DB	"BUS BUSY$"
+;
+;-----------------------------------------------------------------------------
+;
+BDOS	.EQU 5		;ENTRY BDOS
+BS	.EQU 8		;BACKSPACE
+TAB	.EQU 9		;TABULATOR
+LF	.EQU 0AH		;LINE-FEED
+CR	.EQU 0DH		;CARRIAGE-RETURN
+;
+; OUTPUT TEXT AT HL
+;
+PRTSTR:	LD	A,(HL)
+	OR	A
+	RET	Z
+	CALL	PRINP
+	INC	HL
+	JR	PRTSTR
+;
+;Output WORD
+;***********
+;
+;PARAMETER: Entry WORD IN HL
+;*********
+;
+OUTW:	LD A,H
+	CALL OUTB
+	LD A,L
+	CALL OUTB
+	RET
+;
+;Output BYTE
+;***********
+;
+;PARAMETER: Entry BYTE IN A
+;*********
+;
+OUTB:	PUSH AF
+	RRCA
+	RRCA
+	RRCA
+	RRCA
+	AND 0FH
+	CALL HBTHE	;Change Half-BYTE
+	POP AF
+	AND 0FH
+	CALL HBTHE
+	RET
+;
+;Output HALF-BYTE
+;****************
+;
+;PARAMETER: Entry Half-BYTE IN A (BIT 0 - 3)
+;*********
+;
+HBTHE:	CP 0AH
+	JR C,HBTHE1
+	ADD A,7		;Character to Letter
+HBTHE1:	ADD A,30H
+	LD E,A
+	CALL PCHAR
+	RET
+;
+;
+;Output on Screen
+;****************
+;
+PRBS:	LD E,BS
+	CALL PCHAR
+	RET
+;
+;Output CR+LF on Screen
+;**********************
+;
+NEWLINE:
+CRLF:	LD E,CR
+	CALL PCHAR
+	LD E,LF
+	CALL PCHAR
+	RET
+;
+;Output ASCII-Character
+;**********************
+;
+COUT:
+PRINP:	PUSH AF
+        PUSH DE
+	LD E,A
+	CALL PCHAR
+        POP DE
+	POP AF
+	RET
+;
+;CALL BDOS with Register Save
+;****************************
+;
+INCHA:	LD C,1		;INPUT CHARACTER TO A
+	JR BDO
+PCHAR:	LD C,2		;PRINT CHARACTER IN E
+	JR BDO
+PSTRIN:	LD C,9		;PRINT STRING
+	JR BDO
+INBUFF:	LD C,10		;READ CONSOLE-BUFFER
+	JR BDO
+CSTS:	LD C,11		;CONSOLE-STATUS
+	JR BDO
+OPEN:	LD C,15		;OPEN FILE
+	JR BDO
+CLOSE:	LD C,16		;CLOSE FILE
+	JR BDO
+DELETE:	LD C,19		;DELETE FILE
+	JR BDO
+READS:	LD C,20		;READ SEEK
+	JR BDO
+WRITES:	LD C,21		;WRITE SEEK
+	JR BDO
+MAKE:	LD C,22		;MAKE FILE
+	JR BDO
+SETDMA:	LD C,26		;SET DMA-ADDRESS
+BDO:	PUSH HL
+	PUSH DE
+	PUSH BC
+	PUSH IX
+	PUSH IY
+	CALL BDOS
+	POP IY
+	POP IX
+	POP BC
+	POP DE
+	POP HL
+	RET
+;
+        .END
--- a/Source/Apps/tstdskng.asm
+++ b/Source/Apps/tstdskng.asm
--- a/Source/HBIOS/Build.ps1
+++ b/Source/HBIOS/Build.ps1
@@ -19,7 +19,7 @@ param([string]$Platform = "", [string]$Config = "", [int]$RomSize = 512, [string
 # setup mechanism so that multiple configuration are not needed.  When building for UNA, the pre-built
 # UNA BIOS is simply imbedded, it is not built here.
 #
-$PlatformListZ80 = "SBC", "ZETA", "ZETA2", "RCZ80", "RCZ280", "EZZ80", "UNA"
+$PlatformListZ80 = "SBC", "MBC", "ZETA", "ZETA2", "RCZ80", "RCZ280", "EZZ80", "UNA"
 $PlatformListZ180 = "N8", "MK4", "RCZ180", "SCZ180", "DYNO"
 $PlatformListZ280 = "RCZ280"

@@ -183,7 +183,6 @@ if ($Platform -ne "UNA")
 	Asm 'tastybasic'
 	Asm 'game'
 	Asm 'usrrom'
-	Asm 'imgpad1'
 	Asm 'imgpad2'
 }

@@ -194,15 +193,15 @@ if ($Platform -ne "UNA")
 "Building ${RomName} output files..."

 # Build 32K OS chunk containing the loader, debug monitor, and two OS images
-Concat 'romldr.bin', 'eastaegg.bin','dbgmon.bin', "..\cpm22\cpm_${Bios}.bin", "..\zsdos\zsys_${Bios}.bin" osimg.bin
+Concat 'romldr.bin', 'dbgmon.bin', "..\cpm22\cpm_${Bios}.bin", "..\zsdos\zsys_${Bios}.bin" osimg.bin

 # Build 20K OS chunk containing the loader, debug monitor, and one OS image
-Concat 'romldr.bin', 'eastaegg.bin','dbgmon.bin', "..\zsdos\zsys_${Bios}.bin" osimg_small.bin
+Concat 'romldr.bin','dbgmon.bin', "..\zsdos\zsys_${Bios}.bin" osimg_small.bin

 # Build second and third 32K chunks containing supplemental ROM apps (not for UNA)
 if ($Platform -ne "UNA")
 {
-	Concat '..\Forth\camel80.bin', 'nascom.bin', 'tastybasic.bin', 'game.bin', 'imgpad1.bin', 'usrrom.bin' osimg1.bin
+	Concat '..\Forth\camel80.bin', 'nascom.bin', 'tastybasic.bin', 'game.bin', 'eastaegg.bin', 'usrrom.bin' osimg1.bin
 	Concat 'netboot.mod', 'imgpad2.bin' osimg2.bin
 }

--- a/Source/HBIOS/Build.sh
+++ b/Source/HBIOS/Build.sh
@@ -99,20 +99,20 @@ done

 cp ../Forth/camel80.bin .

-make dbgmon.bin romldr.bin eastaegg.bin imgpad1.bin imgpad2.bin
+make dbgmon.bin romldr.bin eastaegg.bin imgpad2.bin

 if [ $platform != UNA ] ; then
-	make nascom.bin tastybasic.bin game.bin usrrom.bin imgpad1.bin imgpad2.bin
+	make nascom.bin tastybasic.bin game.bin usrrom.bin imgpad2.bin
 	make hbios_rom.bin hbios_app.bin hbios_img.bin
 fi

 echo "Building $romname output files..."

-cat romldr.bin eastaegg.bin dbgmon.bin ../CPM22/cpm_$BIOS.bin ../ZSDOS/zsys_$BIOS.bin >osimg.bin
-cat romldr.bin eastaegg.bin dbgmon.bin ../ZSDOS/zsys_$BIOS.bin >osimg_small.bin
+cat romldr.bin dbgmon.bin ../CPM22/cpm_$BIOS.bin ../ZSDOS/zsys_$BIOS.bin >osimg.bin
+cat romldr.bin dbgmon.bin ../ZSDOS/zsys_$BIOS.bin >osimg_small.bin

 if [ $platform != UNA ] ; then
-	cat camel80.bin nascom.bin tastybasic.bin game.bin imgpad1.bin usrrom.bin >osimg1.bin
+	cat camel80.bin nascom.bin tastybasic.bin game.bin eastaegg.bin usrrom.bin >osimg1.bin
 	cat netboot.mod imgpad2.bin >osimg2.bin
 fi

--- a/Source/HBIOS/Config/MBC_std.asm
+++ b/Source/HBIOS/Config/MBC_std.asm
@@ -22,12 +22,14 @@
 ; PLEASE REFER TO THE CUSTOM BUILD INSTRUCTIONS (README.TXT) IN THE SOURCE DIRECTORY (TWO
 ; DIRECTORIES ABOVE THIS ONE).
 ;
-#DEFINE PLATFORM_NAME "SBC"
+#DEFINE PLATFORM_NAME "Multi Board Computer"
 #DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD ON <CR> OR AUTO BOOT
 ;
-#include "cfg_sbc.asm"
+#include "cfg_mbc.asm"
 ;
-INTMODE		.SET	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
-MEMMGR		.SET	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+BATCOND		.SET	FALSE
 ;
 PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+DSKYENABLE	.SET	FALSE		; ENABLES DSKY
+DSKYMODE	.SET	DSKYMODE_NG	; DSKY VERTSION: DSKYMODE_[V1|NG]
--- a/Source/HBIOS/Makefile
+++ b/Source/HBIOS/Makefile
@@ -24,7 +24,7 @@ else
 	OBJECTS += RCZ80_zrc.rom RCZ80_zrc.com RCZ80_zrc.upd
 	OBJECTS += SBC_std.rom SBC_std.com SBC_std.upd
 	OBJECTS += SBC_simh.rom SBC_simh.com SBC_simh.upd
-	OBJECTS += SBC_mbc.rom SBC_mbc.com SBC_mbc.upd
+	OBJECTS += MBC_std.rom MBC_std.com MBC_std.upd
 	OBJECTS += SCZ180_126.rom SCZ180_126.com SCZ180_126.upd
 	OBJECTS += SCZ180_130.rom SCZ180_130.com SCZ180_130.upd
 	OBJECTS += SCZ180_131.rom SCZ180_131.com SCZ180_131.upd
@@ -35,7 +35,7 @@ else
 endif

 MOREDIFF = camel80.bin game.bin hbios_rom.bin nascom.bin prefix.bin usrrom.bin \
-	dbgmon.bin hbios_app.bin imgpad1.bin imgpad2.bin osimg1.bin osimg2.bin romldr.bin \
+	dbgmon.bin hbios_app.bin imgpad2.bin osimg1.bin osimg2.bin romldr.bin \
 	eastaegg.bin hbios_img.bin osimg.bin tastybasic.bin \
 	game.bin usrrom.bin

--- a/Source/HBIOS/cfg_dyno.asm
+++ b/Source/HBIOS/cfg_dyno.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "DYNO"
 ;
-PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_DYNO	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -63,6 +63,7 @@ DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
@@ -163,6 +164,7 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -175,7 +177,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/cfg_ezz80.asm
+++ b/Source/HBIOS/cfg_ezz80.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "EASYZ80"
 ;
-PLATFORM	.EQU	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_EZZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -64,6 +64,7 @@ DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
@@ -194,6 +195,7 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -210,7 +212,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/cfg_master.asm
+++ b/Source/HBIOS/cfg_master.asm
@@ -10,7 +10,7 @@
 ;
 #DEFINE PLATFORM_NAME "ROMWBW"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -63,7 +63,6 @@ MK4_SD		.EQU	$89		; MK4: SD CARD CONTROL REGISTER ADR
 MK4_RTC		.EQU	$8A		; MK4: RTC LATCH REGISTER ADR
 ;
 RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
-PPIBASE		.EQU	$60		; PRIMARY PARALLEL PORT REGISTERS BASE ADR
 ;
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
@@ -91,10 +90,14 @@ DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -255,6 +258,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_NONE	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -266,6 +270,7 @@ PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+PPPBASE		.EQU	$60		; PPP: PPI REGISTERS BASE ADDRESS
 PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
@@ -277,7 +282,8 @@ PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 UFBASE		.EQU	$0C		; UF: REGISTERS BASE ADR
--- a/Source/HBIOS/cfg_mbc.asm
+++ b/Source/HBIOS/cfg_mbc.asm
@@ -0,0 +1,231 @@
+;
+;==================================================================================================
+;   ROMWBW 2.X CONFIGURATION DEFAULTS FOR MBC
+;==================================================================================================
+;
+; THIS FILE CONTAINS THE FULL SET OF DEFAULT CONFIGURATION SETTINGS FOR THE PLATFORM
+; INDICATED ABOVE. THIS FILE SHOULD *NOT* NORMALLY BE CHANGED.	INSTEAD, YOU SHOULD
+; OVERRIDE ANY SETTINGS YOU WANT USING A CONFIGURATION FILE IN THE CONFIG DIRECTORY
+; UNDER THIS DIRECTORY.
+;
+; THIS FILE CAN BE CONSIDERED A REFERENCE THAT LISTS ALL POSSIBLE CONFIGURATION SETTINGS
+; FOR THE PLATFORM.
+;
+#DEFINE PLATFORM_NAME "Multi Board Computer"
+;
+PLATFORM	.EQU	PLT_MBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
+CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
+BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
+BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
+HBIOS_MUTEX	.EQU	FALSE		; ENABLE REENTRANT CALLS TO HBIOS (ADDS OVERHEAD)
+USELZSA2	.EQU	TRUE		; ENABLE FONT COMPRESSION
+TICKFREQ	.EQU	50		; DESIRED PERIODIC TIMER INTERRUPT FREQUENCY (HZ)
+;
+BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+;
+CPUOSC		.EQU	8000000		; CPU OSC FREQ IN MHZ
+INTMODE		.EQU	0		; INTERRUPTS: 0=NONE, 1=MODE 1, 2=MODE 2, 3=MODE 3 (Z280)
+DEFSERCFG	.EQU	SER_38400_8N1	; DEFAULT SERIAL LINE CONFIG (SEE STD.ASM)
+;
+RAMSIZE		.EQU	512		; SIZE OF RAM IN KB (MUST MATCH YOUR HARDWARE!!!)
+RAM_RESERVE	.EQU	0		; RESERVE FIRST N KB OF RAM (USUALLY 0)
+ROM_RESERVE	.EQU	0		; RESERVE FIRST N KB OR ROM (USUALLY 0)
+MEMMGR		.EQU	MM_MBC		; MEMORY MANAGER: MM_[SBC|Z2|N8|Z180|Z280|MBC]
+MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
+MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
+;
+RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
+;
+KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
+KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
+;
+CTCENABLE	.EQU	FALSE		; ENABLE ZILOG CTC SUPPORT
+CTCDEBUG	.EQU	FALSE		; ENABLE CTC DRIVER DEBUG OUTPUT
+CTCBASE		.EQU	$B0		; CTC BASE I/O ADDRESS
+CTCTIMER	.EQU	TRUE		; ENABLE CTC PERIODIC TIMER
+CTCMODE		.EQU	CTCMODE_CTR	; CTC MODE: CTCMODE_[NONE|CTR|TIM16|TIM256]
+CTCPRE		.EQU	256		; PRESCALE CONSTANT (1-256)
+CTCPRECH	.EQU	2		; PRESCALE CHANNEL (0-3)
+CTCTIMCH	.EQU	3		; TIMER CHANNEL (0-3)
+CTCOSC		.EQU	614400		; CTC CLOCK FREQUENCY
+;
+EIPCENABLE	.EQU	FALSE		; EIPC: ENABLE Z80 EIPC (Z84C15) INITIALIZATION
+;
+SKZENABLE	.EQU	FALSE		; ENABLE SERGEY'S Z80-512K FEATURES
+;
+WDOGMODE	.EQU	WDOG_NONE	; WATCHDOG MODE: WDOG_[NONE|EZZ80|SKZ]
+;
+DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
+DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
+DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
+;
+LEDENABLE	.EQU	TRUE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
+LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
+;
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
+;
+BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
+CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
+VDAEMU		.EQU	EMUTYP_ANSI	; VDA EMULATION: EMUTYP_[TTY|ANSI]
+ANSITRACE	.EQU	1		; ANSI DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKTRACE	.EQU	1		; PPK DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+KBDTRACE	.EQU	1		; KBD DRIVER TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPKKBLOUT	.EQU	KBD_US		; PPK KEYBOARD LANGUAGE: KBD_[US|DE]
+KBDKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+MKYENABLE	.EQU	FALSE		; MSX 5255 PPI KEYBOARD COMPATIBLE DRIVER (REQUIRES TMS VDA DRIVER)
+MKYKBLOUT	.EQU	KBD_US		; KBD KEYBOARD LANGUAGE: KBD_[US|DE]
+;
+DSRTCENABLE	.EQU	TRUE		; DSRTC: ENABLE DS-1302 CLOCK DRIVER (DSRTC.ASM)
+DSRTCMODE	.EQU	DSRTCMODE_STD	; DSRTC: OPERATING MODE: DSRTC_[STD|MFPIC]
+DSRTCCHG	.EQU	FALSE		; DSRTC: FORCE BATTERY CHARGE ON (USE WITH CAUTION!!!)
+;
+BQRTCENABLE	.EQU	FALSE		; BQRTC: ENABLE BQ4845 CLOCK DRIVER (BQRTC.ASM)
+BQRTC_BASE	.EQU	$50		; BQRTC: I/O BASE ADDRESS
+;
+INTRTCENABLE	.EQU	FALSE		; ENABLE PERIODIC INTERRUPT CLOCK DRIVER (INTRTC.ASM)
+;
+RP5RTCENABLE	.EQU	FALSE		; RP5C01 RTC BASED CLOCK (RP5RTC.ASM)
+;
+HTIMENABLE	.EQU	FALSE		; ENABLE SIMH TIMER SUPPORT
+SIMRTCENABLE	.EQU	FALSE		; ENABLE SIMH CLOCK DRIVER (SIMRTC.ASM)
+;
+DS7RTCENABLE	.EQU	FALSE		; DS7RTC: ENABLE DS-1307 I2C CLOCK DRIVER (DS7RTC.ASM)
+DS7RTCMODE	.EQU	DS7RTCMODE_PCF	; DS7RTC: OPERATING MODE: DS7RTC_[PCF]
+;
+DUARTENABLE	.EQU	FALSE		; DUART: ENABLE 2681/2692 SERIAL DRIVER (DUART.ASM)
+;
+UARTENABLE	.EQU	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+UARTOSC		.EQU	1843200		; UART: OSC FREQUENCY IN MHZ
+UARTCFG		.EQU	DEFSERCFG	; UART: LINE CONFIG FOR UART PORTS
+UARTCASSPD	.EQU	SER_300_8N1	; UART: ECB CASSETTE UART DEFAULT SPEED
+UARTSBC		.EQU	TRUE		; UART: AUTO-DETECT SBC/ZETA ONBOARD UART
+UARTCAS		.EQU	TRUE		; UART: AUTO-DETECT ECB CASSETTE UART
+UARTMFP		.EQU	TRUE		; UART: AUTO-DETECT MF/PIC UART
+UART4		.EQU	TRUE		; UART: AUTO-DETECT 4UART UART
+UARTRC		.EQU	FALSE		; UART: AUTO-DETECT RC UART
+;
+ASCIENABLE	.EQU	FALSE		; ASCI: ENABLE Z180 ASCI SERIAL DRIVER (ASCI.ASM)
+;
+Z2UENABLE	.EQU	FALSE		; Z2U: ENABLE Z280 UART SERIAL DRIVER (Z2U.ASM)
+;
+ACIAENABLE	.EQU	FALSE		; ACIA: ENABLE MOTOROLA 6850 ACIA DRIVER (ACIA.ASM)
+;
+SIOENABLE	.EQU	TRUE		; SIO: ENABLE ZILOG SIO SERIAL DRIVER (SIO.ASM)
+SIODEBUG	.EQU	FALSE		; SIO: ENABLE DEBUG OUTPUT
+SIOBOOT		.EQU	0		; SIO: REBOOT ON RCV CHAR (0=DISABLED)
+SIOCNT		.EQU	1		; SIO: NUMBER OF CHIPS TO DETECT (1-2), 2 CHANNELS PER CHIP
+SIO0MODE	.EQU	SIOMODE_ZP	; SIO 0: CHIP TYPE: SIOMODE_[STD|RC|SMB|ZP]
+SIO0BASE	.EQU	$B0		; SIO 0: REGISTERS BASE ADR
+SIO0ACLK	.EQU	(4915200/8)	; SIO 0A: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0ACFG	.EQU	DEFSERCFG	; SIO 0A: SERIAL LINE CONFIG
+SIO0ACTCC	.EQU	-1		; SIO 0A: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+SIO0BCLK	.EQU	(4915200/8)	; SIO 0B: OSC FREQ IN HZ, ZP=2457600/4915200, RC/SMB=7372800
+SIO0BCFG	.EQU	DEFSERCFG	; SIO 0B: SERIAL LINE CONFIG
+SIO0BCTCC	.EQU	-1		; SIO 0B: CTC CHANNEL 0=A, 1=B, 2=C, 3=D, -1 FOR NONE
+;
+XIOCFG		.EQU	DEFSERCFG	; XIO: SERIAL LINE CONFIG
+;
+VDUENABLE	.EQU	FALSE		; VDU: ENABLE VDU VIDEO/KBD DRIVER (VDU.ASM)
+VDUSIZ		.EQU	V80X25		; VDU: DISPLAY FORMAT [V80X24|V80X25|V80X30]
+CVDUENABLE	.EQU	FALSE		; CVDU: ENABLE CVDU VIDEO/KBD DRIVER (CVDU.ASM)
+NECENABLE	.EQU	FALSE		; NEC: ENABLE NEC UPD7220 VIDEO/KBD DRIVER (NEC.ASM)
+TMSENABLE	.EQU	FALSE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.EQU	TMSMODE_SCG	; TMS: DRIVER MODE: TMSMODE_[SCG/N8/RC/RCV9958]
+TMSTIMENABLE	.EQU	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+VGAENABLE	.EQU	FALSE		; VGA: ENABLE VGA VIDEO/KBD DRIVER (VGA.ASM)
+VGASIZ		.EQU	V80X25		; VGA: DISPLAY FORMAT [V80X25|V80X30|V80X43]
+;
+MDENABLE	.EQU	TRUE		; MD: ENABLE MEMORY (ROM/RAM) DISK DRIVER (MD.ASM)
+MDROM		.EQU	TRUE		; MD: ENABLE ROM DISK
+MDRAM		.EQU	TRUE		; MD: ENABLE RAM DISK
+MDTRACE		.EQU	1		; MD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+MDFFENABLE	.EQU	FALSE		; MD: ENABLE FLASH FILE SYSTEM 
+;
+;
+FDENABLE	.EQU	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.EQU	FDMODE_DIO3	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPWDC]
+FDCNT		.EQU	2		; FD: NUMBER OF FLOPPY DRIVES ON THE INTERFACE (1-2)
+FDTRACE		.EQU	1		; FD: TRACE LEVEL (0=NO,1=FATAL,2=ERRORS,3=ALL)
+FDMEDIA		.EQU	FDM144		; FD: DEFAULT MEDIA FORMAT FDM[720|144|360|120|111]
+FDMEDIAALT	.EQU	FDM720		; FD: ALTERNATE MEDIA FORMAT FDM[720|144|360|120|111]
+FDMAUTO		.EQU	TRUE		; FD: AUTO SELECT DEFAULT/ALTERNATE MEDIA FORMATS
+;
+RFENABLE	.EQU	FALSE		; RF: ENABLE RAM FLOPPY DRIVER
+RFCNT		.EQU	1		; RF: NUMBER OF RAM FLOPPY UNITS (1-4)
+;
+IDEENABLE	.EQU	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
+IDETRACE	.EQU	1		; IDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+IDECNT		.EQU	1		; IDE: NUMBER OF IDE INTERFACES TO DETECT (1-3), 2 DRIVES EACH
+IDE0MODE	.EQU	IDEMODE_DIO	; IDE 0: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE0BASE	.EQU	$20		; IDE 0: IO BASE ADDRESS
+IDE0DATLO	.EQU	$20		; IDE 0: DATA LO PORT FOR 16-BIT I/O
+IDE0DATHI	.EQU	$28		; IDE 0: DATA HI PORT FOR 16-BIT I/O
+IDE0A8BIT	.EQU	FALSE		; IDE 0A (MASTER): 8 BIT XFER
+IDE0B8BIT	.EQU	FALSE		; IDE 0B (MASTER): 8 BIT XFER
+IDE1MODE	.EQU	IDEMODE_NONE	; IDE 1: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE1BASE	.EQU	$00		; IDE 1: IO BASE ADDRESS
+IDE1DATLO	.EQU	$00		; IDE 1: DATA LO PORT FOR 16-BIT I/O
+IDE1DATHI	.EQU	$00		; IDE 1: DATA HI PORT FOR 16-BIT I/O
+IDE1A8BIT	.EQU	TRUE		; IDE 1A (MASTER): 8 BIT XFER
+IDE1B8BIT	.EQU	TRUE		; IDE 1B (MASTER): 8 BIT XFER
+IDE2MODE	.EQU	IDEMODE_NONE	; IDE 2: DRIVER MODE: IDEMODE_[DIO|DIDE|MK4|RC]
+IDE2BASE	.EQU	$00		; IDE 2: IO BASE ADDRESS
+IDE2DATLO	.EQU	$00		; IDE 2: DATA LO PORT FOR 16-BIT I/O
+IDE2DATHI	.EQU	$00		; IDE 2: DATA HI PORT FOR 16-BIT I/O
+IDE2A8BIT	.EQU	TRUE		; IDE 2A (MASTER): 8 BIT XFER
+IDE2B8BIT	.EQU	TRUE		; IDE 2B (MASTER): 8 BIT XFER
+;
+PPIDEENABLE	.EQU	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+PPIDETRACE	.EQU	1		; PPIDE: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PPIDECNT	.EQU	1		; PPIDE: NUMBER OF PPI CHIPS TO DETECT (1-3), 2 DRIVES PER CHIP
+PPIDE0BASE	.EQU	$60		; PPIDE 0: PPI REGISTERS BASE ADR
+PPIDE0A8BIT	.EQU	FALSE		; PPIDE 0A (MASTER): 8 BIT XFER
+PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE1BASE	.EQU	$20		; PPIDE 1: PPI REGISTERS BASE ADR
+PPIDE1A8BIT	.EQU	FALSE		; PPIDE 1A (MASTER): 8 BIT XFER
+PPIDE1B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+PPIDE2BASE	.EQU	$44		; PPIDE 2: PPI REGISTERS BASE ADR
+PPIDE2A8BIT	.EQU	FALSE		; PPIDE 2A (MASTER): 8 BIT XFER
+PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
+;
+SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
+SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
+SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
+SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
+;
+PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
+PRPSDENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER SD CARD SUPPORT
+PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
+;
+PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+;
+HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
+HDSKTRACE	.EQU	1		; HDSK: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
+;
+PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
+PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
+PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
+PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
+;
+UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
+UFBASE		.EQU	$0C		; UF: REGISTERS BASE ADR
+;
+SN76489ENABLE	.EQU	FALSE		; SN76489 SOUND DRIVER
+AUDIOTRACE	.EQU	FALSE		; ENABLE TRACING TO CONSOLE OF SOUND DRIVER
+SN7CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
+;
+AY38910ENABLE	.EQU	FALSE		; AY: AY-3-8910 / YM2149 SOUND DRIVER
+AY_CLK		.EQU	CPUOSC / 4	; DEFAULT TO CPUOSC / 4
+AYMODE		.EQU	AYMODE_NONE	; AY: DRIVER MODE: AYMODE_[SCG/N8/RCZ80/RCZ180]
+;
+SPKENABLE	.EQU	TRUE		; SPK: ENABLE RTC LATCH IOBIT SOUND DRIVER (SPK.ASM)
--- a/Source/HBIOS/cfg_mk4.asm
+++ b/Source/HBIOS/cfg_mk4.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "MARK IV"
 ;
-PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_MK4		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,10 +66,14 @@ DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -189,6 +193,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MK4	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	TRUE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -199,6 +204,7 @@ PRPSDTRACE	.EQU	1		; PRP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PRPCONENABLE	.EQU	TRUE		; PRP: ENABLE PROPIO DRIVER VIDEO/KBD SUPPORT
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+PPPBASE		.EQU	$60		; PPP: PPI REGISTERS BASE ADDRESS
 PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
@@ -209,7 +215,8 @@ PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 UFBASE		.EQU	$0C		; UF: REGISTERS BASE ADR
--- a/Source/HBIOS/cfg_n8.asm
+++ b/Source/HBIOS/cfg_n8.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "N8"
 ;
-PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_N8		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -48,7 +48,6 @@ N8_RMAP		.EQU	$96		; N8: ROM PAGE REGISTER ADR
 N8_DEFACR	.EQU	$1B		; N8: AUX CTL REGISTER DEFAULT VALUE (QUIESCIENT STATE)
 ;
 RTCIO		.EQU	N8_RTC		; RTC LATCH REGISTER ADR
-PPIBASE		.EQU	N8_PPI0		; PRIMARY PARALLEL PORT REGISTERS BASE ADR
 ;
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
@@ -68,11 +67,15 @@ DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
-LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
-LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -192,6 +195,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_CSIO	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -209,7 +213,8 @@ PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 FIFO_BASE	.EQU	$0C		; UF: REGISTERS BASE ADR
--- a/Source/HBIOS/cfg_rcz180.asm
+++ b/Source/HBIOS/cfg_rcz180.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "RC2014"
 ;
-PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_RCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -66,6 +66,7 @@ DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
@@ -207,6 +208,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -223,7 +225,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/cfg_rcz280.asm
+++ b/Source/HBIOS/cfg_rcz280.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "RC2014"
 ;
-PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280]
+PLATFORM	.EQU	PLT_RCZ280	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z280	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -71,6 +71,7 @@ DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
@@ -223,6 +224,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -239,7 +241,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/cfg_rcz80.asm
+++ b/Source/HBIOS/cfg_rcz80.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "RC2014"
 ;
-PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_RCZ80	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -65,6 +65,7 @@ DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
@@ -212,6 +213,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_MT	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	2		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -228,7 +230,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/cfg_sbc.asm
+++ b/Source/HBIOS/cfg_sbc.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "SBC"
 ;
-PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_SBC		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -35,7 +35,6 @@ MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
 RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
-PPIBASE		.EQU	$60		; PRIMARY PARALLEL PORT REGISTERS BASE ADR
 ;
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
@@ -60,11 +59,15 @@ DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
-LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
-LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -192,6 +195,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_JUHA	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -210,7 +214,8 @@ PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO4BASE	.EQU	$90		; PIO: PIO REGISTERS BASE ADR FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
 PIOZBASE	.EQU	$88		; PIO: PIO REGISTERS BASE ADR FOR ECB ZP BOARD
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 UFBASE		.EQU	$0C		; UF: REGISTERS BASE ADR
--- a/Source/HBIOS/cfg_scz180.asm
+++ b/Source/HBIOS/cfg_scz180.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "SCZ180"
 ;
-PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_SCZ180	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z180	; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -61,6 +61,7 @@ DIAGPORT	.EQU	$0D		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
 LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
+LEDMODE		.EQU	LEDMODE_STD	; LEDMODE_[STD|RTC]
 LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
@@ -202,6 +203,7 @@ PPIDE2B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	TRUE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_SC	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -218,7 +220,7 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/cfg_una.asm
+++ b/Source/HBIOS/cfg_una.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "UNA"
 ;
-PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_UNA		; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 BIOS		.EQU	BIOS_UNA	; HARDWARE BIOS: BIOS_[WBW|UNA]
 ;
 BOOT_TIMEOUT	.EQU	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
--- a/Source/HBIOS/cfg_zeta.asm
+++ b/Source/HBIOS/cfg_zeta.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "ZETA"
 ;
-PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_ZETA	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; BIOS_[WBW|UNA]: HARDWARE BIOS
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -35,7 +35,6 @@ MPCL_RAM	.EQU	$78		; SBC MEM MGR RAM PAGE SELECT REG (WRITE ONLY)
 MPCL_ROM	.EQU	$7C		; SBC MEM MGR ROM PAGE SELECT REG (WRITE ONLY)
 ;
 RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
-PPIBASE		.EQU	$60		; PRIMARY PARALLEL PORT REGISTERS BASE ADR
 ;
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
@@ -52,11 +51,15 @@ DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
-LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
-LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -137,6 +140,7 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -144,6 +148,7 @@ SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+PPPBASE		.EQU	$60		; PPP: PPI REGISTERS BASE ADDRESS
 PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
@@ -152,7 +157,8 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/cfg_zeta2.asm
+++ b/Source/HBIOS/cfg_zeta2.asm
@@ -13,7 +13,7 @@
 ;
 #DEFINE PLATFORM_NAME "ZETA V2"
 ;
-PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO]
+PLATFORM	.EQU	PLT_ZETA2	; PLT_[SBC|ZETA|ZETA2|N8|MK4|UNA|RCZ80|RCZ180|EZZ80|SCZ180|DYNO|RCZ280|MBC]
 CPUFAM		.EQU	CPU_Z80		; CPU FAMILY: CPU_[Z80|Z180|Z280]
 BIOS		.EQU	BIOS_WBW	; HARDWARE BIOS: BIOS_[WBW|UNA]
 BATCOND		.EQU	FALSE		; ENABLE LOW BATTERY WARNING MESSAGE
@@ -38,7 +38,6 @@ MPGSEL_3	.EQU	$7B		; Z2 MEM MGR BANK 3 PAGE SELECT REG (WRITE ONLY)
 MPGENA		.EQU	$7C		; Z2 MEM MGR PAGING ENABLE REGISTER (BIT 0, WRITE ONLY)
 ;
 RTCIO		.EQU	$70		; RTC LATCH REGISTER ADR
-PPIBASE		.EQU	$60		; PRIMARY PARALLEL PORT REGISTERS BASE ADR
 ;
 KIOENABLE	.EQU	FALSE		; ENABLE ZILOG KIO SUPPORT
 KIOBASE		.EQU	$80		; KIO BASE I/O ADDRESS
@@ -63,11 +62,15 @@ DIAGENABLE	.EQU	FALSE		; ENABLES OUTPUT TO 8 BIT LED DIAGNOSTIC PORT
 DIAGPORT	.EQU	$00		; DIAGNOSTIC PORT ADDRESS
 DIAGDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON DIAGNOSTIC LEDS
 ;
-LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED (SINGLE LED)
-LEDPORT		.EQU	$0E		; STATUS LED PORT ADDRESS
+LEDENABLE	.EQU	FALSE		; ENABLES STATUS LED
+LEDMODE		.EQU	LEDMODE_RTC	; LEDMODE_[STD|RTC]
+LEDPORT		.EQU	RTCIO		; STATUS LED PORT ADDRESS
 LEDDISKIO	.EQU	TRUE		; ENABLES DISK I/O ACTIVITY ON STATUS LED
 ;
-DSKYENABLE	.EQU	FALSE		; ENABLES DSKY (DO NOT COMBINE WITH PPIDE)
+DSKYENABLE	.EQU	FALSE		; ENABLES DSKY
+DSKYMODE	.EQU	DSKYMODE_V1	; DSKY VERSION: DSKYMODE_[V1|NG]
+DSKYPPIBASE	.EQU	$60		; BASE I/O ADDRESS OF DSKY PPI
+DSKYOSC		.EQU	3000000		; OSCILLATOR FREQ FOR DSKYNG (IN HZ)
 ;
 BOOTCON		.EQU	0		; BOOT CONSOLE DEVICE
 CRTACT		.EQU	FALSE		; ACTIVATE CRT (VDU,CVDU,PROPIO,ETC) AT STARTUP
@@ -148,6 +151,7 @@ PPIDE0B8BIT	.EQU	FALSE		; PPIDE 0B (SLAVE): 8 BIT XFER
 ;
 SDENABLE	.EQU	FALSE		; SD: ENABLE SD CARD DISK DRIVER (SD.ASM)
 SDMODE		.EQU	SDMODE_PPI	; SD: DRIVER MODE: SDMODE_[JUHA|N8|CSIO|PPI|UART|DSD|MK4|SC|MT]
+SDPPIBASE	.EQU	$60		; SD: BASE I/O ADDRESS OF PPI FOR PPI MODDE
 SDCNT		.EQU	1		; SD: NUMBER OF SD CARD DEVICES (1-2), FOR DSD & SC ONLY
 SDTRACE		.EQU	1		; SD: TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
@@ -155,6 +159,7 @@ SDCSIOFAST	.EQU	FALSE		; SD: ENABLE TABLE-DRIVEN BIT INVERTER IN CSIO MODE
 PRPENABLE	.EQU	FALSE		; PRP: ENABLE ECB PROPELLER IO BOARD DRIVER (PRP.ASM)
 ;
 PPPENABLE	.EQU	FALSE		; PPP: ENABLE ZETA PARALLEL PORT PROPELLER BOARD DRIVER (PPP.ASM)
+PPPBASE		.EQU	$60		; PPP: PPI REGISTERS BASE ADDRESS
 PPPSDENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER SD CARD SUPPORT
 PPPSDTRACE	.EQU	1		; PPP: SD CARD TRACE LEVEL (0=NO,1=ERRORS,2=ALL)
 PPPCONENABLE	.EQU	TRUE		; PPP: ENABLE PPP DRIVER VIDEO/KBD SUPPORT
@@ -163,7 +168,8 @@ HDSKENABLE	.EQU	FALSE		; HDSK: ENABLE SIMH HDSK DISK DRIVER (HDSK.ASM)
 ;
 PIO_4P		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB 4P BOARD
 PIO_ZP		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR ECB ZILOG PERIPHERALS BOARD (PIO.ASM)
-PPI_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIO_SBC		.EQU	FALSE		; PIO: ENABLE PARALLEL PORT DRIVER FOR 8255 CHIP
+PIOSBASE	.EQU	$60		; PIO: PIO REGISTERS BASE ADR FOR SBC PPI
 ;
 UFENABLE	.EQU	FALSE		; UF: ENABLE ECB USB FIFO DRIVER (UF.ASM)
 ;
--- a/Source/HBIOS/dbgmon.asm
+++ b/Source/HBIOS/dbgmon.asm
@@ -953,8 +953,13 @@ TXT_HELP	.TEXT	"\r\nMonitor Commands (all values in hex):"
 ;
 #IF DSKYENABLE
 ;
-#DEFINE DSKY_KBD
+#DEFINE	DSKY_KBD
+  #IF (DSKYMODE == DSKYMODE_V1)
 #INCLUDE "dsky.asm"
+  #ENDIF
+  #IF (DSKYMODE == DSKYMODE_NG)
+#INCLUDE "dskyng.asm"
+  #ENDIF
 ;
 KY_PR	.EQU	KY_FW		; USE [FW] FOR [PR] (PORT READ)
 KY_PW	.EQU	KY_BK		; USE [BW] FOR [PW] (PORT WRITE)
@@ -1352,7 +1357,7 @@ ENCBUF1:
 	INC	HL			; BUMP TO NEXT BYTE FOR NEXT PASS
 	PUSH	AF			; SAVE IT
 	AND	$80			; ISOLATE HI BIT (DP)
-	XOR	$80			; FLIP IT
+	;XOR	$80			; FLIP IT
 	LD	C,A			; SAVE IN C
 	POP	AF			; RECOVER ORIGINAL
 	AND	$7F			; REMOVE HI BIT (DP)
@@ -1373,8 +1378,10 @@ ENCBUF1:
 	POP	HL			; RESTORE HL
 	RET
 ;
-CPUUP	.DB 	$84,$CB,$EE,$BB,$80,$BB,$EE,$84	; "-CPU UP-" (RAW SEG)
-MSGBOOT	.DB	$FF,$9D,$9D,$8F,$20,$80,$80,$80 ; "Boot!   " (RAW SEG)
+#IF (DSKYMODE == DSKYMODE_V1)
+;
+CPUUP	.DB 	$04,$4B,$6E,$3B,$00,$3B,$6E,$04	; "-CPU UP-" (RAW SEG)
+MSGBOOT	.DB	$7F,$1D,$1D,$0F,$A0,$00,$00,$00 ; "Boot!   " (RAW SEG)
 ADDR	.DB	$17,$18,$19,$10,$00,$00,$00,$00	; "Adr 0000" (ENCODED)
 PORT	.DB	$13,$14,$15,$16,$10,$10,$00,$00	; "Port  00" (ENCODED)
 GOTO	.DB	$1A,$14,$10,$10,$00,$00,$00,$00	; "Go  0000" (ENCODED)
@@ -1385,6 +1392,7 @@ GOTO	.DB	$1A,$14,$10,$10,$00,$00,$00,$00	; "Go  0000" (ENCODED)
 ;_____________________________________________________________________________
 ;
 SEGDECODE:
+;
 	; POS	$00  $01  $02  $03  $04  $05  $06  $07
 	; GLYPH '0'  '1'  '2'  '3'  '4'  '5'  '6'  '7'
 	.DB	$7B, $30, $6D, $75, $36, $57, $5F, $70
@@ -1397,6 +1405,37 @@ SEGDECODE:
 	; GLYPH	' '  '-'  '.'  'P'  'o'  'r'  't'  'A'  'd'  'r'  'G'
 	.DB	$00, $04, $00, $6E, $1D, $0C, $0F, $7E, $3D, $0C, $5B
 ;
+#ENDIF
+;
+#IF (DSKYMODE == DSKYMODE_NG)
+;
+CPUUP	.DB 	$40,$39,$73,$3E,$00,$3E,$73,$40	; "-CPU UP-" (RAW SEG)
+MSGBOOT	.DB	$7F,$5C,$5C,$78,$A0,$00,$00,$00 ; "Boot!   " (RAW SEG)
+ADDR	.DB	$17,$18,$19,$10,$00,$00,$00,$00	; "Adr 0000" (ENCODED)
+PORT	.DB	$13,$14,$15,$16,$10,$10,$00,$00	; "Port  00" (ENCODED)
+GOTO	.DB	$1A,$14,$10,$10,$00,$00,$00,$00	; "Go  0000" (ENCODED)
+;
+;_HEX_7_SEG_DECODE_TABLE______________________________________________________
+;
+; SET BIT 7 TO DISPLAY W/ DECIMAL POINT
+;_____________________________________________________________________________
+;
+SEGDECODE:
+;
+	; POS	$00  $01  $02  $03  $04  $05  $06  $07
+	; GLYPH '0'  '1'  '2'  '3'  '4'  '5'  '6'  '7'
+	.DB	$3F, $06, $58, $4F, $66, $6D, $7D, $07
+;
+	; POS	$08  $09  $0A  $0B  $0C  $0D  $0E  $0F
+	; GLYPH	'8'  '9'  'A'  'B'  'C'  'D'  'E'  'F'
+	.DB	$7F, $67, $77, $7C, $39, $5E, $79, $71
+;
+	; POS	$10  $11  $12  $13  $14  $15  $16  $17  $18  $19  $1A
+	; GLYPH	' '  '-'  '.'  'P'  'o'  'r'  't'  'A'  'd'  'r'  'G'
+	.DB	$00, $40, $00, $73, $5C, $50, $78, $77, $5E, $50, $3D
+;
+#ENDIF
+;
 DISPLAYBUF:	.FILL	8,0
 ;
 #ELSE
--- a/Source/HBIOS/dsky.asm
+++ b/Source/HBIOS/dsky.asm
@@ -3,10 +3,13 @@
 ; DSKY ROUTINES
 ;==================================================================================================
 ;
-PPIA		.EQU 	PPIBASE + 0	; PORT A
-PPIB		.EQU 	PPIBASE + 1	; PORT B
-PPIC		.EQU 	PPIBASE + 2	; PORT C
-PPIX	 	.EQU 	PPIBASE + 3	; PPI CONTROL PORT
+; THE DSKY MAY COSESIDE ON THE SAME PPI BUS AS A PPISD.  IT MAY NOT
+; SHARE A PPI BUS WITH A PPIDE.
+;
+PPIA		.EQU 	DSKYPPIBASE + 0	; PORT A
+PPIB		.EQU 	DSKYPPIBASE + 1	; PORT B
+PPIC		.EQU 	DSKYPPIBASE + 2	; PORT C
+PPIX	 	.EQU 	DSKYPPIBASE + 3	; PPI CONTROL PORT
 ;
 ;		ICM7218A	KEYPAD		PPISD
 ;		--------	--------	--------
@@ -26,6 +29,15 @@ PPIX	 	.EQU 	PPIBASE + 3	; PPI CONTROL PORT
 ; BITS 7-6 IDENTFY THE COLUMN OF THE KEY PRESSED
 ; BITS 5-0 ARE A BITMAP, WITH A BIT ON TO INDICATE ROW OF KEY PRESSED
 ;
+;
+; LED SEGMENTS (BIT VALUES)
+;
+;	+--40--+
+;	02    20
+;	+--04--+
+;	08    10
+;	+--01--+  80
+;
 ;      ____PC0________PC1________PC2________PC3____
 ; PB5 |	 $20 [D]    $60 [E]    $A0 [F]	  $E0 [BO]
 ; PB4 |	 $10 [A]    $50 [B]    $90 [C]	  $D0 [GO]
@@ -278,7 +290,12 @@ DSKY_SHOW:
 	LD	B,DSKY_BUFLEN		; NUMBER OF DIGITS
 	LD	C,PPIA
 DSKY_HEXOUT2:
-	OUTI
+	;OUTI
+	LD	A,(HL)
+	XOR	$80			; FIX DOT POLARITY
+	OUT	(C),A
+	INC	HL
+	DEC	B
 	JP	Z,DSKY_STROBE		; DO FINAL STROBE AND RETURN
 	CALL	DSKY_STROBE		; STROBE BYTE VALUE
 	JR	DSKY_HEXOUT2
@@ -301,22 +318,22 @@ DSKY_COFF:
 ; CLEAR HIGH BIT TO SHOW DECIMAL POINT
 ;
 DSKY_NUMS:
-	.DB	$FB	; 0
-	.DB	$B0	; 1
-	.DB	$ED	; 2
-	.DB	$F5	; 3
-	.DB	$B6	; 4
-	.DB	$D7	; 5
-	.DB	$DF	; 6
-	.DB	$F0	; 7
-	.DB	$FF	; 8
-	.DB	$F7	; 9
-	.DB	$FE	; A
-	.DB	$9F	; B
-	.DB	$CB	; C
-	.DB	$BD	; D
-	.DB	$CF	; E
-	.DB	$CE	; F
+	.DB	$7B	; 0
+	.DB	$30	; 1
+	.DB	$6D	; 2
+	.DB	$75	; 3
+	.DB	$36	; 4
+	.DB	$57	; 5
+	.DB	$5F	; 6
+	.DB	$70	; 7
+	.DB	$7F	; 8
+	.DB	$77	; 9
+	.DB	$7E	; A
+	.DB	$1F	; B
+	.DB	$4B	; C
+	.DB	$3D	; D
+	.DB	$4F	; E
+	.DB	$4E	; F
 ;
 ; SEG DISPLAY WORKING STORAGE
 ;
--- a/Source/HBIOS/dskyng.asm
+++ b/Source/HBIOS/dskyng.asm
@@ -0,0 +1,561 @@
+;
+;==================================================================================================
+; DSKY NEXT GEN ROUTINES
+;==================================================================================================
+;
+; A DSKYNG CAN SHARE A PPI BUS WITH EITHER A PPIDE OR PPISD.
+;
+; LED SEGMENTS (BIT VALUES)
+;
+;	+--01--+
+;	20    02
+;	+--40--+
+;	10    04
+;	+--08--+  80
+;
+; KEY CODE MAP (KEY CODES) --CCCRRR 
+;
+;	00	08	10	18
+;	01	09	11	19
+;	02	0A	12	1A
+;	03	0B	13	1B
+;	04	0C	14	1C
+;	05	0D	15	1D
+;
+; LED BIT MAP (BIT VALUES)
+;
+;	$08	$09	$0A	$0B
+;	---	---	---	---
+;	01	01	01	01
+;	02	02	02	02
+;	04      04      04      04
+;	08      08      08      08
+;	10      10      10      10
+;	20      20      20      20
+;
+PPIA		.EQU 	DSKYPPIBASE + 0	; PORT A
+PPIB		.EQU 	DSKYPPIBASE + 1	; PORT B
+PPIC		.EQU 	DSKYPPIBASE + 2	; PORT C
+PPIX	 	.EQU 	DSKYPPIBASE + 3	; PPI CONTROL PORT
+;
+DSKY_PPIX_RD:	.EQU	%10010010	; PPIX VALUE FOR READS
+DSKY_PPIX_WR:	.EQU	%10000010	; PPIX VALUE FOR WRITES
+;
+; PIO CHANNEL C:
+;
+;	7	6	5	4	3	2	1	0
+;	RES	/RD	/WR	CS	CS	0	0	A0
+;
+; SETTING BITS 3 & 4 WILL ASSERT /CS ON 3279
+; CLEAR BITS 5 OR 6 TO ASSERT READ/WRITE
+;
+DSKY_PPI_IDLE:	.EQU	%01100000
+;
+DSKY_CMD_CLR:	.EQU	%11011111	; CLEAR (ALL OFF)
+DSKY_CMD_CLRX:	.EQU	%11010011	; CLEAR (ALL ON)
+DSKY_CMD_WDSP:	.EQU	%10010000	; WRITE DISPLAY RAM
+DSKY_CMD_RDSP:	.EQU	%01110000	; READ DISPLAY RAM
+DSKY_CMD_CLK:	.EQU	%00100000	; SET CLK PRESCALE
+DSKY_CMD_FIFO:	.EQU	%01000000	; READ FIFO
+;
+DSKY_PRESCL:	.EQU	DSKYOSC/100000	; PRESCALER
+;
+;__DSKY_INIT_________________________________________________________________________________________
+;
+;  CONFIGURE PARALLEL PORT AND INITIALIZE 8279
+;____________________________________________________________________________________________________
+;
+;
+; HARDWARE RESET 8279 BY PULSING RESET LINE
+;
+DSKY_INIT:
+;
+	; SETUP PPI
+	CALL	DSKY_PPIRD
+	; INIT 8279 VALUES TO IDLE STATE
+	LD	A,DSKY_PPI_IDLE
+	OUT	(PPIC),A
+	; PULSE RESET SIGNAL ON 8279
+	SET	7,A
+	OUT	(PPIC),A
+	RES	7,A
+	OUT	(PPIC),A
+	; DONE
+;
+DSKY_REINIT:
+	CALL	DSKY_PPIIDLE
+	; SET CLOCK SCALER TO 20
+	LD	A,DSKY_CMD_CLK | DSKY_PRESCL
+	CALL	DSKY_CMD
+	LD	A,%00001000		; dan
+	CALL	DSKY_CMD
+	; FALL THRU
+;
+DSKY_RESET:
+	; RESET DSKY
+	LD	A,DSKY_CMD_CLR
+	CALL	DSKY_CMD
+	RET
+;
+#IFDEF DSKY_KBD
+;
+KY_0	.EQU	$00
+KY_1	.EQU	$01
+KY_2	.EQU	$02
+KY_3	.EQU	$03
+KY_4	.EQU	$04
+KY_5	.EQU	$05
+KY_6	.EQU	$06
+KY_7	.EQU	$07
+KY_8	.EQU	$08
+KY_9	.EQU	$09
+KY_A	.EQU	$0A
+KY_B	.EQU	$0B
+KY_C	.EQU	$0C
+KY_D	.EQU	$0D
+KY_E	.EQU	$0E
+KY_F	.EQU	$0F
+KY_FW	.EQU	$10	; FORWARD
+KY_BK	.EQU	$11	; BACKWARD
+KY_CL	.EQU	$12	; CLEAR
+KY_EN	.EQU	$13	; ENTER
+KY_DE	.EQU	$14	; DEPOSIT
+KY_EX	.EQU	$15	; EXAMINE
+KY_GO	.EQU	$16	; GO
+KY_BO	.EQU	$17	; BOOT
+;
+;__DSKY_STAT_________________________________________________________________________________________
+;
+;  CHECK FOR KEY PRESS, SAVE RAW VALUE, RETURN STATUS
+;____________________________________________________________________________________________________
+;
+DSKY_STAT:
+	CALL	DSKY_ST
+	AND	$0F			; ISOLATE THE CUR FIFO LEN
+	RET
+;
+;__DSKY_GETKEY_____________________________________________________________________________________
+;
+;  WAIT FOR A DSKY KEYPRESS AND RETURN
+;____________________________________________________________________________________________________
+;
+DSKY_GETKEY:
+	CALL	DSKY_STAT
+	JR	Z,DSKY_GETKEY		; LOOP IF NOTHING THERE
+	LD	A,DSKY_CMD_FIFO
+	CALL	DSKY_CMD
+	CALL	DSKY_DIN
+	LD	B,24			; SIZE OF DECODE TABLE
+	LD	C,0			; INDEX
+	LD	HL,DSKY_KEYMAP		; POINT TO BEGINNING OF TABLE
+DSKY_GETKEY1:
+	CP	(HL)			; MATCH?
+	JR	Z,DSKY_GETKEY2		; FOUND, DONE
+	INC	HL
+	INC	C			; BUMP INDEX
+	DJNZ	DSKY_GETKEY1		; LOOP UNTIL EOT
+	LD	A,$FF			; NOT FOUND ERR, RETURN $FF
+	RET
+DSKY_GETKEY2:
+	; RETURN THE INDEX POSITION WHERE THE SCAN CODE WAS FOUND
+	LD	A,C			; RETURN INDEX VALUE
+	RET
+;
+;_KEYMAP_TABLE_____________________________________________________________________________________________________________
+;
+DSKY_KEYMAP:
+	; POS	$00  $01  $02  $03  $04  $05  $06  $07
+	; KEY   [0]  [1]  [2]  [3]  [4]  [5]  [6]  [7]
+	.DB	$0D, $04, $0C, $14, $03, $0B, $13, $02
+;                                                  
+	; POS	$08  $09  $0A  $0B  $0C  $0D  $0E  $0F
+	; KEY   [8]  [9]  [A]  [B]  [C]  [D]  [E]  [F]
+	.DB	$0A, $12, $01, $09, $11, $00, $08, $10
+;                                                  
+	; POS	$10  $11  $12  $13  $14  $15  $16  $17
+	; KEY   [FW] [BK] [CL] [EN] [DE] [EX] [GO] [BO]
+	.DB	$05, $15, $1D, $1C, $1B, $1A, $19, $18
+;
+#ENDIF	; DSKY_KBD
+;
+;==================================================================================================
+; DSKY HEX DISPLAY
+;==================================================================================================
+;
+DSKY_HEXOUT:
+	LD	B,DSKY_HEXBUFLEN
+	LD	HL,DSKY_BUF
+	LD	DE,DSKY_HEXBUF
+DSKY_HEXOUT1:
+	LD	A,(DE)			; FIRST NIBBLE
+	SRL	A
+	SRL	A
+	SRL	A
+	SRL	A
+	PUSH	HL
+	LD	HL,HEXMAP
+	CALL	DSKY_ADDHLA
+	LD	A,(HL)
+	POP	HL
+	LD	(HL),A
+	INC	HL
+	LD	A,(DE)			; SECOND NIBBLE
+	AND	0FH
+	PUSH	HL
+	LD	HL,HEXMAP
+	CALL	DSKY_ADDHLA
+	LD	A,(HL)
+	POP	HL
+	LD	(HL),A
+	INC	HL
+	INC	DE			; NEXT BYTE
+	DJNZ	DSKY_HEXOUT1
+	LD	HL,DSKY_BUF
+	JR	DSKY_SHOW
+;
+;==================================================================================================
+; DSKY SHOW BUFFER
+;   HL: ADDRESS OF BUFFER
+;   ENTER @ SHOWHEX FOR HEX DECODING
+;   ENTER @ SHOWSEG FOR SEGMENT DECODING
+;==================================================================================================
+;
+DSKY_SHOWHEX:
+	JR	DSKY_SHOW
+;
+DSKY_SHOWSEG:
+	JR	DSKY_SHOW
+;
+DSKY_SHOW:
+;	PUSH	HL
+;	CALL	DSKY_RESET
+;	POP	HL
+	LD	C,0			; STARTING DISPLAY POSITION
+	LD	B,DSKY_BUFLEN		; NUMBER OF CHARS
+	JP	DSKY_PUTSTR
+;
+;
+;
+;
+; COMMAND IN A
+; TRASHES BC
+;
+DSKY_CMD:
+	LD	B,$01
+	JR	DSKY_DOUT2
+;
+; DATA VALUE IN A
+; TRASHES BC
+;
+DSKY_DOUT:
+	LD	B,$00
+;
+DSKY_DOUT2:
+;
+	; SAVE INCOMING DATA BYTE
+	PUSH	AF
+;
+	; SET PPI LINE CONFIG TO WRITE MODE
+	CALL	DSKY_PPIWR
+;
+	; SETUP
+	LD	C,PPIC
+;
+	; SET ADDRESS FIRST
+	LD	A,DSKY_PPI_IDLE
+	OR	B
+	OUT	(C),A
+;
+	; ASSERT 8279 /CS
+	SET	3,A
+	SET	4,A
+	OUT	(C),A
+;
+	; PPIC WORKING VALUE TO REG B NOW
+	LD	B,A
+;
+	; ASSERT DATA BYTE VALUE
+	POP	AF
+	OUT	(PPIA),A
+;
+	; PULSE /WR
+	RES	5,B
+	OUT	(C),B
+	NOP			; MAY NOT BE NEEDED
+	SET	5,B
+	OUT	(C),B
+;
+	; DEASSERT /CS
+	RES	3,B
+	RES	4,B
+	OUT	(C),B
+;
+	; CLEAR ADDRESS BIT
+	RES	0,B
+	OUT	(C),B
+;
+	; DONE
+	CALL	DSKY_PPIIDLE
+	RET
+;
+; STATUS VALUE IN A
+; TRASHES BC
+;
+DSKY_ST:
+	LD	B,$01
+	JR	DSKY_DIN2
+;
+; DATA VALUE RETURNED IN A
+; TRASHES BC
+;
+DSKY_DIN:
+	LD	B,$00
+;
+DSKY_DIN2:
+	; SET PPI LINE CONFIG TO WRITE MODE
+	CALL	DSKY_PPIRD
+;
+	; SETUP
+	LD	C,PPIC
+;
+	; SET ADDRESS FIRST
+	LD	A,DSKY_PPI_IDLE
+	OR	B
+	OUT	(C),A
+;
+	; ASSERT 8279 /CS
+	SET	3,A
+	SET	4,A
+	OUT	(C),A
+;
+	; PPIC WORKING VALUE TO REG B NOW
+	LD	B,A
+;
+	; ASSERT /RD
+	RES	6,B
+	OUT	(C),B
+;
+	; GET VALUE
+	IN	A,(PPIA)
+;
+	; DEASSERT /RD
+	SET	6,B
+	OUT	(C),B
+;
+	; DEASSERT /CS
+	RES	3,B
+	RES	4,B
+	OUT	(C),B
+;
+	; CLEAR ADDRESS BIT
+	RES	0,B
+	OUT	(C),B
+;
+	; DONE
+	CALL	DSKY_PPIIDLE
+	RET
+;
+; BLANK THE DISPLAY (WITHOUT USING CLEAR)
+;
+DSKY_BLANK:
+	LD	A,DSKY_CMD_WDSP
+	CALL	DSKY_CMD
+	LD	B,16
+DSKY_BLANK1:
+	PUSH	BC
+	LD	A,$FF
+	CALL	DSKY_DOUT
+	POP	BC
+	DJNZ	DSKY_BLANK1
+	RET
+;
+; WRITE A RAW BYTE VALUE TO DSKY DISPLAY RAM
+; AT LOCATION IN REGISTER C, VALUE IN A.
+;
+DSKY_PUTBYTE:
+	PUSH	BC
+	PUSH	AF
+	LD	A,C
+	ADD	A,DSKY_CMD_WDSP
+	CALL	DSKY_CMD
+	POP	AF
+	XOR	$FF
+	CALL	DSKY_DOUT
+	POP	BC
+	RET
+;
+; READ A RAW BYTE VALUE FROM DSKY DISPLAY RAM
+; AT LOCATION IN REGISTER C, VALUE RETURNED IN A
+;
+DSKY_GETBYTE:
+	PUSH	BC
+	LD	A,C
+	ADD	A,DSKY_CMD_RDSP
+	CALL	DSKY_CMD
+	CALL	DSKY_DIN
+	XOR	$FF
+	POP	BC
+	RET
+;
+; WRITE A STRING OF RAW BYTE VALUES TO DSKY DISPLAY RAM
+; AT LOCATION IN REGISTER C, LENGTH IN B, ADDRESS IN HL.
+;
+DSKY_PUTSTR:
+	PUSH	BC
+	LD	A,C
+	ADD	A,DSKY_CMD_WDSP
+	CALL	DSKY_CMD
+	POP	BC
+;	
+DSKY_PUTSTR1:
+	LD	A,(HL)
+	XOR	$FF
+	INC	HL
+	PUSH	BC
+	CALL	DSKY_DOUT
+	POP	BC
+	DJNZ	DSKY_PUTSTR1
+	RET
+;
+; READ A STRING OF RAW BYTE VALUES FROM DSKY DISPLAY RAM
+; AT LOCATION IN REGISTER C, LENGTH IN B, ADDRESS IN HL.
+;
+DSKY_GETSTR:
+	PUSH	BC
+	LD	A,C
+	ADD	A,DSKY_CMD_RDSP
+	CALL	DSKY_CMD
+	POP	BC
+;	
+DSKY_GETSTR1:
+	PUSH	BC
+	CALL	DSKY_DIN
+	POP	BC
+	XOR	$FF
+	LD	(HL),A
+	INC	HL
+	DJNZ	DSKY_GETSTR1
+	RET
+;
+; HL IS ADR OF ENCODED STRING OF BYTES
+; B IS LEN OF STRING (BYTES)
+; C IS POSITION IN DISPLAY RAM TO WRITE
+;
+DSKY_PUTENCSTR:
+	PUSH	BC
+	LD	A,C
+	ADD	A,DSKY_CMD_WDSP
+	CALL	DSKY_CMD
+	POP	BC
+	EX	DE,HL
+DSKY_PUTENCSTR1:
+	LD	A,(DE)
+	INC	DE
+	LD	HL,HEXMAP
+	CALL	DSKY_ADDHLA
+	LD	A,(HL)
+	XOR	$FF
+	PUSH	BC
+	CALL	DSKY_DOUT
+	POP	BC
+	DJNZ	DSKY_PUTENCSTR1
+	RET
+;
+; SETUP PPI FOR WRITING: PUT PPI PORT A IN OUTPUT MODE
+; AVOID REWRTING PPIX IF ALREADY IN OUTPUT MODE
+;
+DSKY_PPIWR:
+	PUSH	AF
+;
+	; CHECK FOR WRITE MODE
+	LD	A,(DSKY_PPIX_VAL)
+	CP	DSKY_PPIX_WR
+	JR	Z,DSKY_PPIWR1
+;	
+	; SET PPI TO WRITE MODE
+	LD	A,DSKY_PPIX_WR
+	OUT	(PPIX),A
+	LD	(DSKY_PPIX_VAL),A
+;
+	; RESTORE PORT C (MAY NOT BE NEEDED)
+	LD	A,DSKY_PPI_IDLE
+	OUT	(PPIC),A
+;
+DSKY_PPIWR1:
+;
+	POP	AF
+	RET
+;
+;
+;
+DSKY_ADDHLA:
+	ADD	A,L
+	LD	L,A
+	RET	NC
+	INC	H
+	RET
+;
+; SETUP PPI FOR READING: PUT PPI PORT A IN INPUT MODE
+; AVOID REWRTING PPIX IF ALREADY IN INPUT MODE
+;
+DSKY_PPIRD:
+	PUSH	AF
+;
+	; CHECK FOR READ MODE
+	LD	A,(DSKY_PPIX_VAL)
+	CP	DSKY_PPIX_RD
+	JR	Z,DSKY_PPIRD1
+;	
+	; SET PPI TO READ MODE
+	LD	A,DSKY_PPIX_RD
+	OUT	(PPIX),A
+	LD	(DSKY_PPIX_VAL),A
+;
+;	; DIAGNOSTIC
+;	LD	A,'R'
+;	CALL	COUT
+;
+DSKY_PPIRD1:
+	POP	AF
+	RET
+;
+; RELEASE USE OF PPI
+;
+DSKY_PPIIDLE:
+	JR	DSKY_PPIRD		; SAME AS READ MODE
+;
+;
+;
+
+;
+; CODES FOR NUMERICS
+; HIGH BIT ALWAYS SET TO SUPPRESS DECIMAL POINT
+; CLEAR HIGH BIT TO SHOW DECIMAL POINT
+;
+HEXMAP:
+DSKY_NUMS:
+	.DB	$3F	; 0
+	.DB	$06	; 1
+	.DB	$5B	; 2
+	.DB	$4F	; 3
+	.DB	$66	; 4
+	.DB	$6D	; 5
+	.DB	$7D	; 6
+	.DB	$07	; 7
+	.DB	$7F	; 8
+	.DB	$67	; 9
+	.DB	$77	; A
+	.DB	$7C	; B
+	.DB	$39	; C
+	.DB	$5E	; D
+	.DB	$79	; E
+	.DB	$71	; F
+;
+DSKY_PPIX_VAL:	.DB	0
+;
+; SEG DISPLAY WORKING STORAGE
+;
+DSKY_BUF	.FILL	8,0
+DSKY_BUFLEN	.EQU	$ - DSKY_BUF
+DSKY_HEXBUF	.FILL	4,0
+DSKY_HEXBUFLEN	.EQU	$ - DSKY_HEXBUF
--- a/Source/HBIOS/dsrtc.asm
+++ b/Source/HBIOS/dsrtc.asm
@@ -132,12 +132,12 @@ DSRTC_BUFSIZ	.EQU	7		; 7 BYTE BUFFER (YYMMDDHHMMSSWW)
 ;
 DSRTC_PREINIT:
 ;
-	; SET RELEVANT BITS IN RTC LATCH SHADOW REGISTER
-	; TO THEIR QUIESENT STATE
-	LD	A,(DSRTC_OPRVAL)	; GET CURRENT SHADOW REG VAL
-	AND	~DSRTC_MASK		; CLEAR OUR BITS
-	OR	DSRTC_IDLE		; SET OUR IDLE BITS
-	LD	(DSRTC_OPRVAL),A	; SAVE IT
+	;; SET RELEVANT BITS IN RTC LATCH SHADOW REGISTER
+	;; TO THEIR QUIESENT STATE
+	;LD	A,(DSRTC_OPRVAL)	; GET CURRENT SHADOW REG VAL
+	;AND	~DSRTC_MASK		; CLEAR OUR BITS
+	;OR	DSRTC_IDLE		; SET OUR IDLE BITS
+	;LD	(DSRTC_OPRVAL),A	; SAVE IT
 ;
 	CALL	DSRTC_DETECT		; HARDWARE DETECTION
 	LD	(DSRTC_STAT),A		; SAVE RESULT
@@ -478,6 +478,7 @@ DSRTC_TSTCLK:
 ;   E=VALUE (OUTPUT)
 ;
 DSRTC_RDBYT:
+	CALL	DSRTC_START
 	LD	E,C
 	CALL	DSRTC_CMD
 	CALL	DSRTC_GET
@@ -489,6 +490,7 @@ DSRTC_RDBYT:
 ;   E=VALUE
 ;
 DSRTC_WRBYT:
+	CALL	DSRTC_START
 	PUSH	DE			; SAVE VALUE TO WRITE
 	LD	E,C			; CMD TO E
 	CALL	DSRTC_CMD
@@ -525,6 +527,7 @@ DSRTC_WRBYTWP:
 ; BURST READ CLOCK DATA INTO BUFFER AT HL
 ;
 DSRTC_RDCLK:
+	CALL	DSRTC_START
 	LD	E,$BF			; COMMAND = $BF TO BURST READ CLOCK
 	CALL	DSRTC_CMD		; SEND COMMAND TO RTC
 	LD	B,DSRTC_BUFSIZ		; B IS LOOP COUNTER
@@ -540,6 +543,7 @@ DSRTC_RDCLK1:
 ; BURST WRITE CLOCK DATA FROM BUFFER AT HL
 ;
 DSRTC_WRCLK:
+	CALL	DSRTC_START
 	LD	E,$8E			; COMMAND = $8E TO WRITE CONTROL REGISTER
 	CALL	DSRTC_CMD		; SEND COMMAND
 	LD	E,$00			; $00 = UNPROTECT
@@ -668,6 +672,25 @@ DSRTC_GET1:
 	CALL	DLY1			; DELAY 27 T-STATES
 	DJNZ	DSRTC_GET1		; LOOP IF NOT DONE (13)
 	RET
+
+
+;
+; START A COMMAND SEQUENCE
+;   INITIATES A COMMAND SEQUENCE
+;   DOES NOT DESTROY ANY REGISTERS.
+;
+;   1) CAPTURE RTC LATCH BITS
+;
+DSRTC_START:
+	; SET RELEVANT BITS IN RTC LATCH SHADOW REGISTER
+	; TO THEIR QUIESENT STATE
+	PUSH	AF
+	LD	A,(DSRTC_OPRVAL)	; GET CURRENT SHADOW REG VAL
+	AND	~DSRTC_MASK		; CLEAR OUR BITS
+	OR	DSRTC_IDLE		; SET OUR IDLE BITS
+	LD	(DSRTC_OPRVAL),A	; SAVE IT
+	POP	AF
+	RET
 ;
 ; COMPLETE A COMMAND SEQUENCE
 ;   FINISHES UP A COMMAND SEQUENCE.
@@ -676,8 +699,10 @@ DSRTC_GET1:
 ;   1) SET ALL LINES BACK TO QUIESCENT STATE
 ;
 DSRTC_END:
+	;PUSH	AF
 	LD	A,(DSRTC_OPRVAL)	; INIT A WITH QUIESCENT STATE
 	OUT	(DSRTC_IO),A		; WRITE TO PORT
+	;POP	AF
 	RET				; RETURN
 ;
 ; WORKING VARIABLES
--- a/Source/HBIOS/imgpad1.asm
+++ b/Source/HBIOS/imgpad1.asm
@@ -1,12 +0,0 @@
-#INCLUDE "std.asm"
-;
-SLACK		.EQU	($8000-BAS_SIZ-TBC_SIZ-FTH_SIZ-GAM_SIZ-USR_SIZ)
-		.FILL	SLACK,00H
-;
-MON_STACK	.EQU	$
-;
-		.ECHO	"Padspace space created: "
-		.ECHO	SLACK
-		.ECHO	" bytes.\n"
-
-		.END
--- a/Source/HBIOS/pio.asm
+++ b/Source/HBIOS/pio.asm
@@ -929,10 +929,10 @@ DEFPIO(PIO4BASE+12,M_Output,M_Output,M_BitAllOut,M_Output,INT_N,INT_N)
 DEFPIO(PIOZBASE+0,M_Input,M_Input,M_BitAllOut,M_BitAllOut,INT_N,INT_N)
 DEFPIO(PIOZBASE+4,M_Output,M_Output,M_BitAllOut,M_BitAllOut,INT_N,INT_N)
 #ENDIF
-; PPI_SBC & (PLATFORM == PLT_SBC) & (PPIDEMODE != PPIDEMODE_SBC))
+; PIO_SBC & (PLATFORM == PLT_SBC) & (PPIDEMODE != PPIDEMODE_SBC))

-#IF 	PPI_SBC
-DEFPPI(PPIBASE,M_Output,M_Output,M_Output,M_BitAllOut,M_BitAllOut,M_BitAllOut)
+#IF 	PIO_SBC
+DEFPPI(PIOSBASE,M_Output,M_Output,M_Output,M_BitAllOut,M_BitAllOut,M_BitAllOut)
 #ENDIF
 ;
 PIO_CNT	.EQU	($ - PIO_CFG) / CFG_SIZ 	
--- a/Source/HBIOS/ppide.asm
+++ b/Source/HBIOS/ppide.asm
@@ -1011,6 +1011,22 @@ PPIDE_RESET:
 	;OUT	(PPIDE_IO_PPI),A	; DO IT
 	LD	C,(IY+PPIDE_PPI)	; PPI CONTROL WORD
 	OUT	(C),A			; WRITE IT
+;
+; IF A DSKYNG IS ACTIVE AND IS ON THE SAME PPI PORT AS THE PPISD BEING
+; RESET, THEN THE DSKYNG WILL ALSO BE RESET.  SO, THE RESET CODE IS
+; BRACKETED WITH CODE TO SAVE AND RESTORE THE STATE OF THE DSKYNG.
+; THERE IS NO CHECK FOR THE SPECIFIC PPI PORT SINCE IT DOES NO HARM
+; IF THE DSKYNG IS SAVED AND RESTORED.
+;
+#IF (DSKYENABLE)
+  #IF (DSKYMODE == DSKYMODE_NG)
+	; SAVE CONTENTS OF DSKY DISPLAY ACROSS RESET
+	LD	B,8
+	LD	C,0
+	LD	HL,DSKY_BUF
+	CALL	DSKY_GETSTR
+  #ENDIF
+#ENDIF
 ;
 	; PULSE IDE RESET LINE
 	LD	A,PPIDE_CTL_RESET
@@ -1024,6 +1040,17 @@ PPIDE_RESET:
 	OUT	(C),A
 	LD	DE,20
 	CALL	VDELAY
+;	
+#IF (DSKYENABLE)
+  #IF (DSKYMODE == DSKYMODE_NG)
+	; REININT DSKY AND RESTORE CONTENTS
+	CALL	DSKY_REINIT
+	LD	B,8
+	LD	C,0
+	LD	HL,DSKY_BUF
+	CALL	DSKY_PUTSTR
+  #ENDIF
+#ENDIF
 ;
 	LD	A,%00001010		; SET ~IEN, NO INTERRUPTS
 	;OUT	(PPIDE_REG_CTRL),A
--- a/Source/HBIOS/ppp.asm
+++ b/Source/HBIOS/ppp.asm
@@ -6,9 +6,9 @@
 ; TODO:
 ;   1) ADD SUPPORT FOR DSKY
 ;
-PPP_IO		.EQU	PPIBASE + 0	; PPP DATA I/O (PPI PORT A)
-PPP_CTL		.EQU	PPIBASE + 2	; PPP CTL LINES (PPI PORT C)
-PPP_PPICTL	.EQU	PPIBASE + 3	; PPI CONTROL PORT
+PPP_IO		.EQU	PPPBASE + 0	; PPP DATA I/O (PPI PORT A)
+PPP_CTL		.EQU	PPPBASE + 2	; PPP CTL LINES (PPI PORT C)
+PPP_PPICTL	.EQU	PPPBASE + 3	; PPI CONTROL PORT
 ;
 ; COMMAND BYTES
 ;
@@ -49,7 +49,7 @@ PPP_CMDVER	.EQU	$F1		; SEND FIRMWARE VERSION
 PPP_INIT:
 	CALL	NEWLINE			; FORMATTING
 	PRTS("PPP: IO=0x$")
-	LD	A,PPIBASE
+	LD	A,PPPBASE
 	CALL	PRTHEXBYTE
 ;
 	CALL	PPP_INITPPP		; INIT PPP BOARD
@@ -358,7 +358,7 @@ PPPCON_DEVICE:
 	LD	E,0			; E := DEVICE NUM, ALWAYS 0
 	LD	C,$BF			; C := DEVICE TYPE, 0xBF IS PROP TERM
 	LD	H,0			; H := 0, DRIVER HAS NO MODES
-	LD	L,PPIBASE		; L := BASE I/O ADDRESS
+	LD	L,PPPBASE		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
@@ -694,7 +694,7 @@ PPPSD_DEVICE:
 	LD	E,(IY+PPPSD_DEV)	; E := PHYSICAL DEVICE NUMBER
 	LD	C,%01010000		; C := ATTRIBUTES, REMOVABLE, SD CARD
 	LD	H,0			; H := 0, DRIVER HAS NO MODES
-	LD	L,PPIBASE		; L := BASE I/O ADDRESS
+	LD	L,PPPBASE		; L := BASE I/O ADDRESS
 	XOR	A			; SIGNAL SUCCESS
 	RET
 ;
--- a/Source/HBIOS/romldr.asm
+++ b/Source/HBIOS/romldr.asm
@@ -1078,8 +1078,16 @@ clrled:
 	out	(DIAGPORT),a	; clear diag leds
  #endif
  #if (LEDENABLE)
-	or	$FF		; led is inverted
+    #if (LEDMODE == LEDMODE_STD)
+	ld	a,$FF		; led is inverted
 	out	(LEDPORT),a	; clear led
+    #endif
+    #if (LEDMODE == LEDMODE_RTC)
+	; Only bits 0 and 1 of the RTC latch are for the LEDs.  Here,
+	; we assume that it is OK to zero all bits of the RTC latch.
+	xor	a		; turn off
+	out	(LEDPORT),a	; clear led
+    #endif
  #endif
 #endif
 	ret
@@ -1903,9 +1911,14 @@ str_err_api	.db	"Unexpected hardware BIOS API failure",0
 ;
 #if (DSKYENABLE)
 #define	DSKY_KBD
+  #if (DSKYMODE == DSKYMODE_V1)
 VDELAY	.equ	vdelay
 DLY2	.equ	dly2
 #include "dsky.asm"
+  #endif
+  #if (DSKYMODE == DSKYMODE_NG)
+#include "dskyng.asm"
+  #endif
 #endif
 ;
 ;=======================================================================
@@ -1957,10 +1970,18 @@ str_help	.db	"\r\n"
 		.db	0
 ;
 #if (DSKYENABLE)
-msg_sel		.db	$ff,$9d,$9d,$8f,$ec,$80,$80,$80	; "boot?   "
-msg_boot	.db	$ff,$9d,$9d,$8f,$00,$00,$00,$80	; "boot... "
-msg_load	.db	$8b,$9d,$fd,$bd,$00,$00,$00,$80	; "load... "
-msg_go		.db	$db,$9d,$00,$00,$00,$80,$80,$80	; "go...   "
+  #if (DSKYMODE == DSKYMODE_V1)
+msg_sel		.db	$7f,$1d,$1d,$0f,$6c,$00,$00,$00	; "boot?   "
+msg_boot	.db	$7f,$1d,$1d,$0f,$80,$80,$80,$00	; "boot... "
+msg_load	.db	$0b,$1d,$7d,$3d,$80,$80,$80,$00	; "load... "
+msg_go		.db	$5b,$1d,$80,$80,$80,$00,$00,$00	; "go...   "
+  #endif
+  #if (DSKYMODE == DSKYMODE_NG)
+msg_sel		.db	$7f,$5c,$5c,$78,$53,$00,$00,$00	; "boot?   "
+msg_boot	.db	$7f,$5c,$5c,$78,$80,$80,$80,$00	; "boot... "
+msg_load	.db	$38,$5c,$5f,$5e,$80,$80,$80,$00	; "load... "
+msg_go		.db	$3d,$5c,$80,$80,$80,$00,$00,$00	; "go...   "
+  #endif
 #endif
 ;
 ;=======================================================================
@@ -2050,13 +2071,13 @@ ra_ent(str_fth,	  'F',	   KY_EX, BID_IMG1, $0000, FTH_LOC, FTH_SIZ, FTH_LOC)
 ra_ent(str_bas,	  'B',	   KY_DE, BID_IMG1, $1700, BAS_LOC, BAS_SIZ, BAS_LOC)
 ra_ent(str_tbas,  'T',	   KY_EN, BID_IMG1, $3700, TBC_LOC, TBC_SIZ, TBC_LOC)
 ra_ent(str_play,  'P',	   $FF,	  BID_IMG1, $4000, GAM_LOC, GAM_SIZ, GAM_LOC)
-ra_ent(str_user,  'U',	   $FF,	  BID_IMG1, $7000, USR_LOC, USR_SIZ, USR_LOC)
+ra_ent(str_egg,	  'E'+$80, $FF,   BID_IMG1, $4900, EGG_LOC, EGG_SIZ, EGG_LOC)
+ra_ent(str_user,  'U',	   $FF,	  BID_IMG1, $4B00, USR_LOC, USR_SIZ, USR_LOC)
 ra_ent(str_net,   'N',	   $FF,	  BID_IMG2, $0000, NET_LOC, NET_SIZ, NET_LOC)
 #endif
 #if (DSKYENABLE)
-ra_ent(str_dsky,  'Y'+$80, KY_GO, bid_cur,  $1000, MON_LOC, MON_SIZ, MON_DSKY)
+ra_ent(str_dsky,  'Y'+$80, KY_GO, BID_IMG0, $1000, MON_LOC, MON_SIZ, MON_DSKY)
 #endif
-ra_ent(str_egg,	  'E'+$80, $FF	, bid_cur,  $0E00, EGG_LOC, EGG_SIZ, EGG_LOC)
 		.dw	0		; table terminator
 ;
 ra_tbl_app:
@@ -2068,7 +2089,6 @@ ra_ent(str_zsys,  'Z',	   KY_FW, bid_cur,  $2000, CPM_LOC, CPM_SIZ, CPM_ENT)
 #if (DSKYENABLE)
 ra_ent(str_dsky,  'Y'+$80, KY_GO, bid_cur,  $1000, MON_LOC, MON_SIZ, MON_DSKY)
 #endif
-ra_ent(str_egg,	  'E'+$80, $FF	, bid_cur,  $0E00, EGG_LOC, EGG_SIZ, EGG_LOC)
 		.dw	0		; table terminator
 ;
 str_mon		.db	"Monitor",0
--- a/Source/HBIOS/sd.asm
+++ b/Source/HBIOS/sd.asm
@@ -162,10 +162,10 @@ RTCDEF		.SET	SD_OPRDEF	; SET DEFAULT IN HBIOS MAINLINE
 ;
 #IF (SDMODE == SDMODE_PPI)		; PPISD
 SD_DEVMAX	.EQU	1		; NUMBER OF PHYSICAL UNITS (SOCKETS)
-SD_PPIBASE	.EQU	PPIBASE		; BASE IO PORT FOR PPI
-SD_PPIB		.EQU	PPIBASE + 1	; PPI PORT B (INPUT: DOUT)
-SD_PPIC		.EQU	PPIBASE + 2	; PPI PORT C (OUTPUT: CS, CLK, DIN)
-SD_PPIX		.EQU	PPIBASE + 3	; PPI CONTROL PORT
+SD_PPIBASE	.EQU	SDPPIBASE	; BASE IO PORT FOR PPI
+SD_PPIB		.EQU	SDPPIBASE + 1	; PPI PORT B (INPUT: DOUT)
+SD_PPIC		.EQU	SDPPIBASE + 2	; PPI PORT C (OUTPUT: CS, CLK, DIN)
+SD_PPIX		.EQU	SDPPIBASE + 3	; PPI CONTROL PORT
 SD_OPRREG	.EQU	SD_PPIC		; PPI PORT C IS OPR REG
 SD_OPRDEF	.EQU	%00110001	; CS HI, DI HI
 SD_INPREG	.EQU	SD_PPIB		; INPUT REGISTER IS PPI PORT B
--- a/Source/HBIOS/std.asm
+++ b/Source/HBIOS/std.asm
@@ -55,7 +55,7 @@ PLT_EZZ80	.EQU	9		; EASY Z80
 PLT_SCZ180	.EQU	10		; SCZ180
 PLT_DYNO	.EQU	11		; DYNO MICRO-ATX MOTHERBOARD
 PLT_RCZ280	.EQU	12		; RC2014 W/ Z280
-;
+PLT_MBC		.EQU	13		; MULTI BOARD COMPUTER
 ;
 ; CPU TYPES
 ;
@@ -141,6 +141,18 @@ CONBELL_NONE	.EQU	0
 CONBELL_PSG	.EQU	1
 CONBELL_IOBIT	.EQU	2
 ;
+; LED MODE SELECTIONS
+;
+LEDMODE_NONE	.EQU	0
+LEDMODE_STD	.EQU	1
+LEDMODE_RTC	.EQU	2
+;
+; DSKY MODE SELECTIONS
+;
+DSKYMODE_NONE	.EQU	0
+DSKYMODE_V1	.EQU	1
+DSKYMODE_NG	.EQU	2
+;
 ; FD MODE SELECTIONS
 ;
 FDMODE_NONE	.EQU	0
@@ -526,7 +538,7 @@ CBIOS_LOC	.EQU	CBIOS_END - CBIOS_SIZ	; START OF CBIOS

 CPM_ENT		.EQU	CBIOS_LOC		; CPM ENTRY POINT (IN CBIOS)

-LDR_SIZ		.EQU	$0E00
+LDR_SIZ		.EQU	$1000

 MON_LOC		.EQU	$F000			; LOCATION OF MONITOR FOR RUNNING SYSTEM
 MON_SIZ		.EQU	$1000 - HBX_SIZ		; SIZE OF MONITOR BINARY IMAGE
@@ -553,7 +565,7 @@ GAM_SIZ		.EQU	$0900
 GAM_END		.EQU	GAM_LOC + GAM_SIZ

 USR_LOC		.EQU	$0200			; USER
-USR_SIZ		.EQU	$1000
+USR_SIZ		.EQU	$8000 - FTH_SIZ - BAS_SIZ - TBC_SIZ - GAM_SIZ - EGG_SIZ
 USR_END		.EQU	USR_LOC + USR_SIZ

 NET_LOC		.EQU	$0100			; NETWORK BOOT
--- a/Source/HBIOS/tms.asm
+++ b/Source/HBIOS/tms.asm
@@ -637,6 +637,7 @@ TMS_PUTCHAR:
 	CALL	TMS_WR			; SET THE WRITE ADDRESS
 	POP	AF			; RECOVER CHARACTER TO WRITE
 	OUT	(TMS_DATREG),A		; WRITE THE CHARACTER
+	TMS_IODELAY
 	LD	HL,(TMS_POS)		; LOAD CURRENT POSITION INTO HL
 	INC	HL
 	LD	(TMS_POS),HL
--- a/Source/ver.inc
+++ b/Source/ver.inc
@@ -2,4 +2,4 @@
 #DEFINE	RMN	1
 #DEFINE	RUP	1
 #DEFINE	RTP	0
-#DEFINE BIOSVER	"3.1.1-pre.83"
+#DEFINE BIOSVER	"3.1.1-pre.86"
--- a/Source/ver.lib
+++ b/Source/ver.lib
@@ -3,5 +3,5 @@ rmn	equ	1
 rup	equ	1
 rtp	equ	0
 biosver	macro
-	db	"3.1.1-pre.83"
+	db	"3.1.1-pre.86"
 	endm